9911796707
TMI BlogAmended in 2010 shall apply to the goods, services and technologies specified in the Annexure.X X X X Extracts X X X X X X X X Extracts X X X X ..... e to this notification will replace the existing 'Appendix 3' to Schedule- 2 of ITC (HS) Classifications of Export and Import Items, 2009-14. 3. Purpose of the notification: The FT(D&R) Act,1992 was amended in 2010. By this amendment, a new Chapter IV A has been introduced in the FT(D&R) Act,1992. It deals with controls on export of specified goods, services and technologies and empowers the Central Government to notify list of such goods, services and technologies. This notification lists the goods, services and technologies to which provisions of Chapter IV A of the FT (D&R) Act, 1992 as amended in 2010 shall apply. 'Appendix 3' to Schedule 2 of ITC (HS) Classifications of Export and Import Items, popularly known as SCOMET List, would accordingly be replaced by this list. (Anup K. Pujari) Director General of Foreign Trade [email protected] Phone : 23063436, 23062777 (Issued from File No. 01/91/171/14/AM-11/Export Cell) Annexure to Notification No. 38 Dated 31st March, 2011 APPENDIX-3 Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET) export of which is regulated Export of Special Chemicals, Organisms, Materials, Equipment and Technologies (SCOMET ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... after the work piece mount of the table has been turned out of its initial position. "Composite" means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Composite theoretical performance" ("CTP") is a measure of computational performance given in millions of theoretical operations per second (Mtops), calculated using the aggregation of computing elements (CE). "Contouring control" means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated. "CTP" is equivalent to "composite theoretical performance "Designed or modified" describes equipment, parts or components which, as a result of "development," or modification, have become endowed with specified properties that make them fit for a particular application. "Development": Activity related to all phases prior to "production" such as design, design research, design analysis, design concepts, assembly ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tor, i.e. the case, nozzle, inlets, case closures, and includes cured or semi-cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps. "Interior lining" is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior. "Isolated live cultures" includes live cultures in dormant form and in dried preparations. "Isostatic presses" mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material. "Laser": An assembly of components which produce both spatially and temporally coherent light that is amplified by stimulated emission of radiation. "Linearity" (usually measured in terms of non-linearity) means the maximum deviation of the actual characteristic (average of upscale and downscale readings), positi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... on is in progress. "Optical integrated circuit" means a "monolithic integrated circuit" or a hybrid integrated circuit, containing one or more parts designed to function as a photo sensor or photo emitter or to perform (an) optical or (an) electro-optical function(s). "Precursors": Speciality chemicals used in the manufacture of explosives. "Pressure transducers" are devices that convert pressure measurements into an electrical signal. "Production" means all production stages (e.g., product engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance); "Production equipment": Tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production". "Production facilities": Equipment and specially designed "software" therefor integrated into installations for "development" or for one or more phases of "production". "Programmes": A sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer. "Propellants": Su ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tems operating at altitudes of 100 km or higher. "Stability" means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time. "Specially designed" qualifies the description of equipment, parts, components or "software" which, as a result of "development", have unique properties that distinguish them for certain predetermined purposes. For example, a piece of equipment that is "specially designed" will only be considered so if it has no other function or use. Thus a piece of manufacturing equipment that is "specially designed" to produce a certain type of component will only be considered such if it is not capable of producing other types of components. "Tape" is a material constructed of interlaced or unidirectional "monofilaments", 'strands', "rovings", "tows", or "yarns", etc., usually preimpregnated with resin. N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Technology" means, except as otherwise provided for against any item in the SCOMET List, information (including information embodied i ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 0B Prescribed Equipment 0C Technology Category 1 Toxic chemical agents and other chemicals 1A Prohibited chemicals 1B Chemicals permitted only to States party to the Chemical Weapons Convention 1C Chemicals permitted also to States not party to the Chemical Weapons Convention Category 2 Micro-organisms, toxins 2A Bacteria 2B Fungi 2C Parasites 2D Viruses 2E Rickettsials 2F Toxins 2G Plant pathogens 2H Genetically Modified Organisms Category 3 Materials, Materials Processing Equipment and related technologies 3A Materials 3A1 Special materials 3A2 Structural materials 3A3 Rocket propellants and constituent chemicals 3A4 High explosives 3A5 Stealth materials 3B Materials processing and production equipment, related technology and specially designed components and accessories therefor. 3C [Reserved] 3D Chemical and biomaterial manufacturing and handling equipment and facilities Category 4 Nuclear-related other equipment and technology, not controlled under Category 0 4A Equipment, assemblies, components including test and production equipment 4B Equipment, assemblies, components including test and measurement equipment usable in development of nuclear expl ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Such other fissionable material determined by the Central Government from time to time, but the term "special fissionable material" does not include source material. Note: Any quantity of special fissionable material is prescribed substance. 0A3 Other Materials 'Other Materials' means non-nuclear materials for reactors, nuclear related dual-use materials indicated below and such materials as determined by the Central Government from time to time. 0A301 Deuterium, heavy water (deuterium oxide) and any other deuterium compound, in which the ratio of deuterium to hydrogen atoms exceeds 1:5000, in quantities exceeding 5 kilograms of deuterium in one consignment or 25 kilograms of deuterium in any period of 12 months. 0A302 Nuclear grade graphite / carbon, having a purity level better than 5 parts per million (ppm) boron equivalent and with a density greater than 1.5 gram/cc in quantities exceeding 30 metric tons in any period of 12 months. 0A303 Zirconium with hafnium content of less than 1 part to 500 parts of zirconium by weight (i.e. less than 2000 ppm) in the form of metal, its alloys, compounds, manufactures thereof, waste or scrap of any of the foregoing. 0A304 Beryllium ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r greater but less than 200 years, in the following forms: a. Elemental; b. Compounds having a total alpha activity of 37 GBq per kg or greater; c. Mixtures having a total alpha activity of 37 GBq per kg or greater; d. Products or devices containing any of the foregoing. Alpha emitters controlled by this item include: Actinium-225 Actinium-227 Americium-242m Californium-248 Californium-250 Californium-252 Californium-253 Californium-254 Curium-240 Curium-241 Curium-242 Curium-243 Curium244 Einsteinium-252 Einsteinium-253 Einsteinium254 Einsteinium-255 Fermium-257 Gadolinium-148 Mendelevium-258 Neptunium-235 Plutonium-236 Plutonium-237 Plutonium-238 Plutonium-241 Polonium-209 Polonium-210 Polonium-208 Radium-223 Thorium-228 Thorium-227 Uranium-230 Uranium-232 0b Prescribed Equipment 0B001 Nuclear Reactors; associated equipment, components, and systems specially designed, prepared, or adapted or used or intended to be used in such reactors:- a. Complete nuclear reactors b. Nuclear reactor vessels c. Nuclear reactor fuel charging and discharging machines d. Nuclear reactor control rods and equipment e. Nuclear reactor pressure tubes ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ses therefor 3. 'Robots' or 'end effectors' specially designed for handling high explosives; and control units therefor 4. Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells 0B004 Plants for treatment, handling, storage and transportation of radioactive wastes from nuclear reactors or from plants for processing Source Materials or Special Fissionable Materials or from nuclear reprocessing plants; irradiated nuclear fuel; Special Fissionable Materials, and equipment specially designed, prepared, adapted, or intended to be used therefor. 0B005 All systems, associated equipment, components for separation or enrichment of isotopes of uranium, plutonium, lithium or boron, other than analytical instruments, specially designed, prepared, adapted, used or intended to be used therefor as follows: a. Gas centrifuges and assemblies and components specially designed or prepared for use in gas Centrifuges b. Specially designed or prepared auxiliary systems, equipment and components for gas centrifuge enrichment plants c. Specially designed or prepared assemblies and components for use in gaseous diffusion enrichment d. Spec ..... X X X X Extracts X X X X X X X X Extracts X X X X .....
(1). O-Alky ( X X X X Extracts X X X X X X X X Extracts X X X X ..... yl (ME, Et, n-Pr or i-Pr) phosphoramidic dihalides
6. Dialkyl (Me, Et, n-Pr or i-Pr) N, N-dialkyl (Me, Et, n-Pr or i-Pr)-phosphoramidates
7. Arsenic trichloride
8. 2,2-Diphenyl-2 hydroxyacetic acid
9. Quinuclidine-3-ol
10. N,H-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethyl-2 -chlorides and corresponding protonated salts
11. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-ols and corresponding protonated salts
Exemptions: N,N-Dimethylaminoethanol and corresponding protonated salts
N,N-Diethylaminoethanol and corresponding protonated salts
12. N, N-Dialkyl (Me, Et, n-Pr or i-Pr) aminoethane-2-thiols and corresponding protonated salts
13. Thiodiglycol: Bis(2-hydroxyethyl) sulphide
14. Pinacolyl alcohol: 3,3-Dimethylbutane-2-ol
A List of commercially important Schedule-2 Chemicals of CWC is given below :
Sl. No.
Name of Chemical
Entry into Schedule
CAS (Chemical Abstract Service) Numbers
ITC(HS) codes
1.
2-Chloro N, N-Di-isopropyl ethylamine
2B10
4261-68-1
29211911
2.
Diethyl amino Ethanethiol
2B12
100-38-9
29221910
3.
O, O, Dimethyl Methyl Phosphonate
2B04
756-79-6
29209045
4.
2-Hydroxy N, N-Diisopropyl Ethylamine
2B11
96-80-0
29221111
5.
N, N-Diet ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... B13
111-48-8
29309091
36.
2-Butanol, 3, 3-dimethyl-
2B14
464-07-3
29051910
1C Export of Chemicals as specified below is allowed to State Parties to the CWC without an export licence subject to the condition that the exporter shall notify within 30 days of export to the National Authority, Chemicals Weapons Convention, Cabinet Secretariat; the Ministry of External Affairs (D&ISA); the Department of Chemicals & Petro-chemicals, and the DGFT of such exports in the prescribed format (Aayat Niryat Form ) along with the End-Use Certificate and submit to the DGFT a copy of the bill of entry into the destination State Party within 30 days of delivery. Export of chemicals as specified below to states not party to the Chemical Weapons Convention shall continue to be restricted and will be allowed only against an export licence, and in that case also exporters shall submit to the DGFT a copy of the bill of entry into the destination country within 30 days of export.
Sl.No.
Name of Chemical
Entry into Schedule
CAS Numbers
ITC (HS) codes
1.
Phosgene : ( Carbonyl dichloride)
3A01
75-44-5
28121010
2.
Cyanogen chloride [(CN) C1]
3A02
506-77-4
28530091
3.
Hydrocyanic acid
..... X X X X Extracts X X X X X X X X Extracts X X X X ..... rial including living material which has been deliberately inoculated or contaminated with such cultures for the following:
2C001 Entamoeba histolytica
2C002 Babesia microti
2C003 Babesia divergens
2C004 Blostidium coli
2C005 Cryptosporidium spp.
2C006 Leishmania species
2C007 Naegleria australiensis
2C008 Naegleria fowleri
2C009 Plasmodium falciparum
2C010 Pneumocystis carinii
2C011 Schistosoma mansoni
2C012 Schistosoma japonicum
2C013 Schistosoma hemotobium
2C014 Toxoplasma gondii
2C015 Trichinella spiralis
2C016 Trypanosoma bruiei
2D Viruses, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following:
2D001 African Horse Sickness virus
2D002 African Swine Fever virus
2D003 Avian influenza virus
2D004 Blue tongue virus
2D005 Camel pox virus
2D006 Chikungunya virus
2D007 Crimean-Congo hemorrhagic fever virus
2D008 Dengue virus
2D009 Eastern equine encephalitis virus
2D010 Ebola fever virus
2D011 Encephalomyocarditis virus (EMC)
2D012 Foot and Mouth Disease virus (all serotypes and subtypes)
2D0 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 2G004 Dothistroma pini (Scirrhia pini)
2G005 Erwinia amylovora
2G006 Frankliniella occidentalis
2G007 Microcyclus ulei
2G008 Peronospora hyoscyami de Bary f.sp. tabacina (Adam) skalicky
2G009 Phytophthora infestans
2G010 Puccinia graminis
2G011 Puccinia erianthi
2G012 Puccinia striiformiis (Puccinia glumarum)
2G013 Pyricularia oryzae
2G014 Pseudomonas solanacearum
2G015 Peronospora hyscyami de Bary
2G016 Ralstonia solanacearum
2G017 Sugar cane Fiji disease virus
2G018 Sclerotinia sclerotiorum
2G019 Tilletia indica
2G020 Thrips palmi
2G021 Ustilago Maydis
2G022 Xanthomonas albilineans
2G023 Xanthomonas campestris pv citri
2G024 Xanthomonas campestris pv oryzae
2H Genetically Modified Organisms
2H001 Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences associated with pathogenicity and are derived from organisms specified above in 2A, 2B, 2C, 2D, 2E and 2H.
Genetically-modified micro-organisms or genetic elements that contain nucleic acid sequences coding for any of the toxins specified above in 2F.
Category 3 Materials, Materials Processing Equipment and related technologies
3A Materials
3A1 Special Materials
3A101 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ass fibrous or filamentary materials specified in (a) or (b) above.
3A117 Carbon - carbon composites.
3A2 Structural Materials
3A201 Structural materials such as:
a. Composite structures, laminates, resin impregnated fibre prepregs and metal coated fibre preforms made either with an organic matrix or metal matrix utilizing fibrous or filamentary reinforcements, and manufactures thereof, specially designed for use in rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles and subsystems thereof;
b. Resaturated pyrolized (i.e. Carbon-Carbon) materials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles;
c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicles nose tips;
d. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes;
e. Materials and coatings for reduced radar reflectivity;
* f. Bulk machinable silicon-carbide re ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ferrocene(CAS 31904-29-7);
5. Pentyl ferrocene (CAS 1274-00-6);
6. Dicyclopentyl ferrocene(CAS 20773-28-8);
7. Dicyclohexyl ferrocene;
8. Diethyl ferrocene;
9. Dipropyl ferrocene;
10. Dibutyl ferrocene(CAS 1274-08-4);
11. Dihexyl ferrocene (CAS 93894-59-8);
12. Acetyl ferrocenes;
13. Ferrocene Carboxylic acids;
14. Butacene;
c. Other ferrocene derivatives usable as rocket propellant burning rate modifiers.
3A310 Nitrate esters and nitrated plasticisers as follows:
a. Triethylene glycol dinitrate (TEGDN);
b. Trimethylolethane trinitrate (TMETN)(CAS 3032-55-1) ;
c. 1,2,4-butanetriol trinitrate (BTTN)(CAS 6659-60-5) ;
d. Diethylene glycol dinitrate (DEGDN).
3A311 Stabilisers as follows:
a. 2-Nitrodiphenylamine (CAS 119-75-5);
b. N-methyl-p-nitroaniline (CAS 100-15-2).
3A4 High explosives
3A401 High explosives, and propellants or mixtures containing any of the following;
a. Cycloteramethylenetetranitramine (HMX);
b. Cyclotrimethylenetrinitramine (RDX);
c. Triaminotrinitrobenzene (TATB);
d. Hexanitrostilbene (HNS).
License applications for the export of items at 3A401a and 3A401b will normally be denied.
3A5 Stealth materials
3A501 a. Materials for reduced ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of the solid or liquid rocket propellants or rocket propellant constituents and related technology.
3B008 Refrigeration units and equipment capable of cooling hydrogen or helium to -250 degrees Celsius (23K) or lower.
3B009 Continuous nitrators.
3B010 Dehydration presses.
3B011 Screw extruders usable for or specially designed or modified for high explosive extrusion.
3B012 Cutting machines for the sizing of extruded propellant.
3B013 Sweetie barrels (tumblers) 1.85 m or more in diameter and having over 227 kg product capacity;
3B014 Continuous mixers or batch mixers with provision for mixing under vacuum.
3B015 Fluid energy mills usable for grinding or milling any of the items in 3A3.
3B016 Equipment to achieve both sphericity and uniform particle size in metal powders.
a. Metal powder production equipment usable for production, in a controlled environment, of spherical or atomized materials including:
b. Plasma generators (high frequency arc-jets) usable for obtaining sputtered or spherical metallic powders with organisation of the process in an argon-water environment
c. Electroburst equipment usable for obtaining sputtered or spherical metallic powders with organisat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ade from, or lined with, any of the following materials:
a. Alloys with more than 25% nickel and 25% chromium by weight; (e.g., 'Hatelloy', 'Illium', 'Inconel', 'Incoloy')
b. Nickel, or alloys with more than 40% nickel by weight; or
c. Titanium;
d. Ceramics.
3D004 Equipment related to P3, P4 facilities such as protective suits and class III safety cabinets.
No licenses shall be granted for complete containment facilities at P3, P4, containment level as specified in the World Health Organization (WHO) bio-safety manual.
3D005 Technology related to the development, production or use of items in 3D
Category 4 Nuclear-related other equipment, assemblies and components; test and production equipment; and related technology not controlled under Category 0
4A Equipment, assemblies, components including test and production equipment
4A001 Flow-forming machines, spin-forming machines capable of flow-forming functions, and mandrels, as follows:
a. For flow forming machines refer to 5A205.
b. Spin forming machines having both of the following characteristics:
1. Three or more rollers (active or guiding); and
2. which can be equipped with 'numerical control' units or a computer c ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... is configured to grind barrel cams;
3. Tool or cutter grinding machines with software specially designed for the manufacturing of tools or cutters;
4. Crankshaft or camshaft grinding machines.
d. Non-wire type Electrical Discharge Machines (EDM) that have two or more contouring rotary axes and that can be coordinated simultaneously for contouring control.
Note: Stated positioning accuracy levels derived under the following procedures from measurements made according to ISO 230/2 (1988) or national equivalents may be used for each machine tool model if provided to, and accepted by, national authorities instead of individual machine tests.
Stated positioning accuracy are to be derived as follows:
1. Select five machines of a model to be evaluated;
2. Measure the linear axis accuracies according to ISO 230/2 (1988);
3. Determine the accuracy values (A) for each axis of each machine. The method of calculating the accuracy value is described in the ISO 230/2 (1988) standard;
4. Determine the average accuracy value of each axis. This average value becomes the stated positioning accuracy of each axis for the model (Âx, Ây...);
5. Since Item 4A002 refers to each linea ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ms, without closed or open loop feedback, containing a laser to measure slide movement errors of machine tools, dimensional inspection machines, or similar equipment.
Technical Note: In Item 4A003b 'linear displacement' means the change of distance between the measuring probe and the measured object.
c. Angular displacement measuring instruments having an angular position deviation equal to or better (less) than 0.00025°;
Note: Item 4A003c does not control optical instruments, such as autocollimators, using collimated light to detect angular displacement of a mirror.
d. Systems for simultaneous linear-angular inspection of hemi-shells, having both of the following characteristics:
1. Measurement uncertainty along any linear axis equal to or better (less) than 3.5 µm per 5 mm; and
2. Angular position deviation equal to or less than 0.02°.
Notes: 1. Item 4A003 includes machine tools that can be used as measuring machines if they meet or exceed the criteria specified for the measuring machine function.
2. Machines described in Item 4A003 are controlled if they exceed the threshold specified anywhere within their operating range.
Technical Note: All parameters of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured 'bare table,' which are usable for the systems specified in Item 4A006a.
Technical Note : In Item 4A006 'bare table' means a flat table, or surface, with no fixtures or fittings.
4A007 Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment, as follows:
a. Arc re-melt and casting furnaces having both of the following characteristics:
1. Consumable electrode capacities between 1000 and 20000 cm3; and
2. Capable of operating with melting temperatures above 1973 K (1700 °C);
b. Electron beam melting furnaces and plasma atomisation and melting furnaces, having both of the following characteristics:
1. A power of 50 kW or greater; and
2. Capable of operating with melting temperatures above 1473 K (1200 °C);
c. Computer control and monitoring systems specially configured for any of the furnaces specified in Item 4A007a or 4A007b.
4A008 Crucibles made of materials resistant to liquid actinide metals, as follows:
a. Crucibles having both of the following characteristics:
1. A volume of between 150 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... An average output power greater than 40 W;
c. Neodymium-doped (other than glass) lasers with an output wavelength between 1000 and 1100 nm having either of the following:
1. Pulse-excited and Q-switched with a pulse duration equal to or greater than 1 ns, and having either of the following:
a. A single-transverse mode output with an average output power greater than 40 W; or
b. A multiple-transverse mode output with an average output power greater than 50 W;or
2. Incorporating frequency doubling to give an output wavelength between 500 and 550 nm with an average output power of greater than 40 W;
d. Tuneable pulsed single-mode dye laser oscillators having all of the following characteristics:
1. Operating at wavelengths between 300 and 800 nm;
2. An average output power greater than 1 W;
3. A repetition rate greater than 1 kHz; and
4. Pulse width less than 100 ns;
e. Tuneable pulsed dye laser amplifiers and oscillators having all of the following characteristics:
1. Operating at wavelengths between 300 and 800 nm;
2. An average output power greater than 30 W;
3. A repetition rate greater than 1 kHz; and
4. Pulse width less than 100 ns;
Note: Item 4A012e does not con ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cing, over a time period of 8 hours, 100 V or greater with current output of 500 A or greater; and
b. Current or voltage stability better than 0.1% over a time period of 8 hours.
4A016 High-voltage direct current power supplies having both of the following characteristics:
a. Capable of continuously producing, over a time period of 8 hours, 20 kV or greater with current output of 1 A or greater; and
b. Current or voltage stability better than 0.1% over a time period of 8 hours.
4A017 Pressure transducers capable of measuring absolute pressures at any point in the range 0 to 13 kPa and having both of the following characteristics:
a. Pressure sensing elements made of or protected by aluminium, aluminium alloy, nickel, or nickel alloy with more than 60% nickel by weight; and
b. Having either of the following characteristics:
1. A full scale of less than 13 kPa and an accuracy of better than ± 1% of full scale; or
2. A full scale of 13 kPa or greater and an accuracy of better than ± 130 Pa.
Technical Notes:
1. In Item 4A017 pressure transducers are devices that convert pressure measurements into an electrical signal.
2. In Item 4A017 accuracy includes non-lin ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ce equal to or less than 0.010 kg x mm/kg per plane; and
4. Belt drive type.
4A022 Filament winding machines and related equipment, as follows:
* Filament winding machines as specified in 5A206.
b. Coordinating and programming controls for the filament winding machines specified in Item 4A022a;
c. Precision mandrels for the filament winding machines specified in Item 4A022a.
4A023 Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.
Notes:
1. Item 4A023 includes separators capable of enriching stable isotopes as well as those for uranium.
2. A separator capable of separating the isotopes of lead with a one-mass unit difference is inherently capable of enriching the isotopes of uranium with a three-unit mass difference.
3. Item 4A023 includes separators with the ion sources and collectors both in the magnetic field and those configurations in which they are external to the field.
Technical Note: A single 50 mA ion source cannot produce more than 3 g of separated highly enriched uranium (HEU) per year from natural abundance feed.
4A024 Mass spectrometers capabl ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l having an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; and
3. With a diameter of 1.8 m or greater;
b. Internal contactors for the water-hydrogen sulphide exchange tray columns specified in Item 4A028a.
Note: For columns which are especially designed or prepared for the production of heavy water, see Prescribed Equipment (0B002).
Technical Note: Internal contactors of the columns are segmented trays which have an effective assembled diameter of 1.8 m or greater; are designed to facilitate counter current contacting and are constructed of stainless steels with a carbon content of 0.03% or less. These may be sieve trays, valve trays, bubble cap trays or turbo grid trays.
4A029 Hydrogen-cryogenic distillation columns having all of the following characteristics:
a. Designed for operation at internal temperatures of 35 K (-238 ºC) or less;
b. Designed for operation at internal pressures of 0.5 to 5 MPa;
c. Constructed of either:
1. Stainless steel of the 300 series with low sulphur content and with an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; or
2. Equivalent materials which are both cryogenic and H2-compat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... accelerating projectiles to 2 km/s or greater.
4B004 Mechanical rotating mirror cameras, as follows, and specially designed components therefor:
a. Framing cameras with recording rates greater than 225000 frames per second;
b. Streak cameras with writing speeds greater than 0.5 mm/µs.
Note: In Item 4B004 components of such cameras include their synchronizing electronics units and rotor assemblies consisting of turbines, mirrors, and bearings.
4B005 Electronic streak cameras, electronic framing cameras, tubes and devices, as follows:
a. Electronic streak cameras capable of 50 ns or less time resolution;
b. Streak tubes for cameras specified in Item 4B005a;
c. Electronic (or electronically shuttered) framing cameras capable of 50 ns or less frame exposure time;
d. Framing tubes and solid-state imaging devices for use with cameras specified in Item 4B005c, as follows:
1. Proximity focused image intensifier tubes having the photocathode deposited on a transparent conductive coating to decrease photocathode sheet resistance;
2. Gate silicon intensifier target (SIT) vidicon tubes, where a fast system allows gating the photoelectrons from the photocathode before they impi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... used in place of the word detonator.
4B009 Firing sets and equivalent high-current pulse generators, as follows:
a. Explosive detonator firing sets designed to drive multiple controlled detonators specified by Item 4B008 above;
b. Modular electrical pulse generators (pulsers) having all of the following characteristics:
1. Designed for portable, mobile, or ruggedized-use;
2. Enclosed in a dust-tight enclosure;
3. Capable of delivering their energy in less than 15 µs;
4. Having an output greater than 100 A;
5. Having a 'rise time' of less than 10 µs into loads of less than 40 ohms;
6. No dimension greater than 25.4 cm;
7. Weight less than 25 kg ; and
8. Specified to operate over an extended temperature range of 223º to 373º K (-50 ºC to 100 ºC) or specified as suitable for aerospace applications.
Note: Item 4B009b includes xenon flashlamp drivers.
Technical Note: In Item 4B009b5 'rise time' is defined as the time interval from 10% to 90% current amplitude when driving a resistive load.
4B010 Switching devices as follows:
a. Cold-cathode tubes, whether gas filled or not, operating similarly to a spark gap, having all of the following cha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... y propellant (including oxidizers), control systems, and components thereof, specially designed or modified for resistance to vibration;
d. re-entry vehicles and equipment including
1. Heat-shields and components thereof, fabricated of ceramic or ablative materials;
2. Heat sinks and components thereof, fabricated of light weight, high heat capacity materials;
3. Electronic equipment specially designed for re-entry vehicles.
* e. guidance systems and their components such as gyros and inertial reference units;
f. thrust-vector control subsystems including methods of achieving thrust vector control such as flexible nozzle, fluid or secondary gas injection, movable engine or nozzle, deflection of exhaust gas stream (jet vanes or probes) and use of thrust tabs;
g. hybrid rocket motors and components thereof;
h. safing, arming, fusing and firing mechanisms for weapons or warhead.
i. software specially designed for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures.
5A2 Production and Test Equipment.
5A201 Transonic, supersonic, hypersonic wind tunnels; gun tunnels; aeroballistic ranges.
5A202 Test and production equipmen ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... accelerators
5A213 Radial ball bearings having all tolerances specified in accordance with ISO 492 Tolerance Class 2 or better and having all the following characteristics:
a. An inner ring bore diameter between 12 and 50 mm;
b. An outer ring outside diameter between 25 and 100 mm; and
c. A width between 10 and 20 mm.
5A214 Liquid propellant tanks specially designed for the propellants controlled in Item 3A3 or other liquid propellants used in the systems specified in 5A and 5B.
5A215 Production facilities and production equipment specially designed for equipment or materials for 5A101 and 5A102.
5A216 Production equipment and specially designed components thereof, for the production, handling or acceptance testing of liquid propellants or propellant constituents as referred in 3A3;
5A217 Launch and ground support equipment and facilities usable for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned airborne system and cruise missiles as follows:-
a. apparatus, devices and vehicles, designed or modified for the transport, handling, control, activation and launching of the systems.
b. gravity meters (gravimeters), gra ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ing devices to regulate combustion, and specially designed components.
g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out of the direct vision range involving a human operator, designed or modified to incorporate an aerosol dispensation mechanism, or capable of carrying elements of a payload in the form of a particulate or liquid other than fuel components of such vehicles.
Note: This category does not control unpowered airborne vehicles such as gliders, hot air balloons etc.
h. Safing, arming, fusing and firing mechanisms for weapons or warhead.
i Production facilities and Production equipment specially designed for equipment or materials for 5B.
j. Technology, for the development, production or use of equipment, materials or software specified for 5B.
k. Software, for the development, production or use of equipment or materials specified for 5B.
l. Software which coordinates the function of more than one subsystem, specially designed or modified for use in the systems specified in 5B.
5C Avionics and navigation systems designed or modified for use in, or usable in rocket systems ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... uipment and embedded or specially designed software and components thereof, including but not limited to:
a. Radar and laser radar system including altimeter;
b. Electronic assemblies and components;
c. Design technology for protection of avionics and electrical subsystems against electromagnetic pulse (EMP) and electromagnetic interference (EMI) hazards from external sources.
d. Passive sensors for determining bearings to electromagnetic sources (direction finding devices) or terrain characteristics
e. Receiving equipment for Global Navigation Satellite Systems (GNSS: e.g. GPS, GLONASS, GALILEO), capable of operating at aircraft speeds and altitudes or above.
f. Terrain contour mapping equipment, Scene mapping and correlation (both digital and analogue) equipment, Doppler navigation radar equipment, Passive interferometer equipment and Imaging sensor equipment (both active and passive)
g. Design technology for electromagnetic shielding systems, the configuration of hardened electrical circuits and subsystems and for the determination of hardening criteria.
5C011 On-board electronic equipment, devices and their design and manufacturing know-how (except warhead fuses, timers ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Manned-aircraft, aero-engines, related equipment and components:
Note: This category does not control foreign military aircraft or an Indian aircraft carrying a military registration number.
5D001 Combat aircraft and specially designed components thereof;
a. Other aircraft specially designed or modified for military use, including military reconnaissance, assault, military training, transporting and air-dropping troops or military equipment, logistics support, and specially designed components thereof;
b. Aero-engines specially designed or modified for military use, and specially designed components thereof;
c. Airborne equipment, including airborne refuelling equipment, specially designed for use with the aircraft controlled by 5D001a or 5D001b or the aero-engines controlled by 5D001c, and specially designed components thereof;
d. Pressure refuellers, pressure refuelling equipment, equipment specially designed to facilitate operations in confined areas and ground equipment, developed specially for aircraft controlled by 5D001a or 5D001b or for aero-engines controlled by 5D001c;
e. Pressurized breathing equipment and partial pressure suits for use in aircraft anti-g suits, ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ital converter, and digital-to-analogue converter, printed circuit boards or modules, electro-optical or optical integrated circuits designed for signal processing, field programmable logic devices, neural network integrated circuits, custom integrated circuits for which either the function is unknown or the control status of the equipment in which the integrated circuit will be used is unknown, Fast Fourier Transform (FFT) processors, electrical erasable programmable read-only memories (EEPROMs), flash memories or static random-access memories (SRAMs), having any of the following:
a. Rated for operation at an ambient temperature above 398 K (+125°C);
b. Rated for operation at an ambient temperature below 218 K
(-55°C); or
c. Rated for operation over the entire ambient temperature range from 218 K (-55°C) to 398 K (+125°C).
7A006 Radiation-hardened analogue-to-digital and digital-to-analogue converter integrated circuits, as follows:
a. Analogue-to-digital converters having any of the following:
1. A resolution of 8 bit or more, but less than 12 bit, with a total conversion time of less than 5 ns;
2. A resolution of 12 bit with a total conversion time of less ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
