9911796707
TMI BlogAmendments to the list of specified goods (SCOMET) that was notified vide Notification No.38 RE-2010) /2009-2014 dated 31st March, 2011X X X X Extracts X X X X X X X X Extracts X X X X ..... as been numbered as "a". After the entry against "a", entry "b" has been inserted. (2) In Category 3A201, after the entry against clause f, clause "g" has been inserted. (3) In Category 3A301, for the word "spherical" the words "spherical or spheroidal" has been substituted. (4) In Category 3A303, new entry has been added after the entry "Polybutadiene acrylonitrile (PBAN)". (5) In Category 3A306, some figures and words have been added after the letters "(HNF),". (6) In Category 3A310, after the entry against clause d; clauses "e", "f " and "g" have been inserted. (7) In Category 3A401, after the entry against clause d, clause "e" has been inserted. (8) In Category 3B007, after the word "machining", the word ", extruding" has been added. (9) Category 5A201, Category 5A206, and Category 5A217.c. have been substituted. (10) In Category 5A217, after the entry against clause e, clause "f " has been inserted. (11) In Category 5B, after the entry against clause l, clause "m" has been inserted. (12) In 5C007, the existing entry has been numbered as "1" after which entry "2" has been inserted. (13) The entry in clause b of Category 5C010 has been substituted. (14) Category 5C0 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ite visits, on-site verification or access to records/ documentation, by foreign Governments or foreign third parties, either acting directly or through an Indian party or parties. Requests for such permissions shall be considered in the manner in which requests for export/import licence are considered. Provided that where obligations involving site visits, on-site verification or access to records/ documentation by foreign governments or foreign third parties are to be undertaken pursuant to a bilateral agreement or a multilateral treaty to which India is a party, the provisions of the relevant agreement or treaty shall apply. Exporters are advised to refer to the relevant guidelines relating to the export of SCOMET items in the Handbook of Procedures (Vol.I), as issued from time to time. Glossary: Expressions used in the SCOMET List have the following meanings: "Accuracy" usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value. "Active flight control systems" are systems that function to prevent undesirable "aircraft" and missile motions or structural loads by autonomously proc ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... and other applications, are required to detonate. "Fibrous or filamentary materials" include: a. Continuous "monofilaments"; b. Continuous "yarns" and "rovings"; c. "Tapes", fabrics, random mats and braids; d. Chopped fibres, staple fibres and coherent fibre blankets; e. Whiskers, either monocrystalline or polycrystalline, of any length; f. Aromatic polyamide pulp. "Hybrid computer" means equipment which can perform all of the following: a. Accept data; b. Process data, in both analogue and digital representations; and c. Provide output of data. "Image enhancement" means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration. "Information security" is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intende ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... introduction of its reference instruction register. "Missiles" means complete rocket systems and unmanned aerial vehicle systems. "Modified" in the context of "software" describes "software" which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was "modified." "Monofilament" or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called 'chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.: 'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Neural computer" means a computational device designed or modified to mimic the behaviour of a neuron or a collection of neur ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... products. "Resolution" means the least increment of a measuring device; or on digital instruments, the least significant bit. "Roving" is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.: 'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Settling time" means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter. "Signal processing" means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). "Software": A collection of one or more "programmes", or "micro-programmes", fixed in any tangible medium of expression. However, unless otherwise provided for against any item on the SCOMET List, the List does not control "software" which is either in the public domain or is generally available to the public by being : a. Sold from stock at retail selling points without restriction, by means of: 1. Over-the-counter transactions; 2. Mail order transa ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ological specimens, crops, foodstuffs or seed stocks of "microorganisms". "Unmanned Aerial Vehicle" ("UAV") means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board. "Usable in," "usable for," "usable as" or "capable of" qualifies the description of equipment, parts, components, materials, technology or "software" which are suitable for a particular purpose. There is no requirement that the equipment, parts, components, technology or "software" should have been configured, modified or specified for that particular purpose. (Contrast with "specially designed" - see above). "Use" includes operation; installation (including on site installation); maintenance; repair; overhaul; refurbishing. "Vaccine" is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered. "Yarn" is a bundle of twisted 'strands'. N.B.: ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... uipment and technology Note: Export of these items is regulated under the Atomic Energy Act, 1962 and rules framed, and notifications/orders issued thereunder from time-to-time by the Department of Atomic Energy. The licensing authority for items in this category is the Department of Atomic Energy. An application for licences to export prescribed equipment or/an prescribed substances shall be made in writing to the Joint Secretary, Department of Atomic Energy, Anushakti Bhavan, CSM Marg, Mumbai 400001. 0A Prescribed Substances Note: Any radioactive material in Category 0A shall additionally attract the provisions of Radiation Protection Rules, 2004 made under the Atomic Energy Act, 1962 and the provisions of Section-16 of the Atomic Energy Act, 1962. 0A1 Source Material 0A101 Uranium containing the mixture of isotopes occurring in nature. 0A102 Uranium depleted in the isotope 235. 0A103 Thorium. 0A104 Any of the foregoing in the form of metal, alloy, chemical compound, or concentrate or any substance. 0A105 Any other material containing one or more of the foregoing. Prescribed quantitative limits: as given below and in any period of 12 months: a. Uranium (conta ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... re at 293 K (20 degrees C); and b. In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm. Technical note: The phrase 'capable of' encompasses titanium alloys before or after heat treatment. 0A308 Tritium, tritium compounds or mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1000, except when utilized in such quantities and for such purposes as for organic labelled compounds, Gas Filled Light Sources and as Tritiated Water for radiotracer studies. 0A309 Hafnium: (CAS 7440-58-6) Hafnium metal, alloys containing more than 60% hafnium by weight, hafnium compounds containing more than 60% hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing. 0A310 Radium-226: Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing, except medical applicators and a product or device containing less than 0.37 GBq (10mCi) of Ra-226 in any form. 0A311 Boron (CAS 7740-42-8) Boron enriched in the Boron-10 (10B) isotope to greater than its natural isot ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ncentration of deuterium, heavy water- 1. Water - Hydrogen Sulphide Exchange Towers 2. Blowers and Compressors for hydrogen-sulphide gas circulation 3. Ammonia-Hydrogen Exchange Towers greater than or equal to 35 m in height with diameters of 1.5 m to 2.5 m 4. Tower Internals and Stage Pumps 5. Ammonia Crackers with operating pressures greater than or equal to 3 MPa 6. Infrared Absorption Analyzers capable of 'on-line' hydrogen/ deuterium ratio analysis 7. Catalytic Burners for conversion of enriched deuterium gas into heavy water 8. Complete heavy water upgrade systems or columns therefor b. Plants for the conversion of uranium c. Plants for the conversion of plutonium d. Tritium facilities or plants, and equipment therefor e. Lithium isotope separation facilities or plants, and equipment therefor 0B003 Plants for reprocessing of irradiated nuclear fuel and equipment, components and systems specially designed, prepared or adapted or used or intended to be used in such plants, including but not limited to: a. Irradiated fuel element chopping machines designed for remote operation b. Dissolvers capable of withstanding hot and highly corrosive liquid for dissolution o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r fuel elements, and equipment specially designed or prepared therefor including but not limited to: a. fully automatic pellet inspection stations specially designed or prepared for checking final dimensions and surface defects of the fuel pellets; b. automatic welding machines specially designed or prepared for welding end caps onto the fuel pins (or rods); c. automatic test and inspection stations specially designed or prepared for checking the integrity of completed fuel pins (or rods). Item 'c' typically includes equipment for: 1) x-ray examination of pin (or rod) end cap welds, 2) helium leak detection from pressurized pins (or rods), and 3) gamma-ray scanning of the pins (or rods) to check for correct loading of the fuel pellets inside. 0B007 Plants or systems for production, handling, storage and transportation of Radioisotopes in quantities exceeding 100 Curies (3.7 X 10 12 Becquerel). 0B008 Neutron generators including neutron chain reacting assemblies and fusion assemblies of all kinds for producing fissile materials 0C Technology Technology and software for the development, production or use of prescribed substances or prescribed equipment specified in 0A o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r: (a) A list of States Parties can be obtained from the Disarmament & International Security Affairs Division of the Ministry of External Affairs (Room No. 40G, South Block, New Delhi) or at the official website of the Organization for the Prohibition of Chemical Weapons at www.opcw.org. (b) A general permission valid for a period of two years may be applied for export of chemicals in this category. This permission shall be subject to the condition that for each export consignment, exporters shall, within 30 days of exports, notify the details to the National Authority, Chemical Weapons Convention, Cabinet Secretariat ; Ministry of External Affairs (D&ISA); Department of Chemicals and Petrochemicals and the Directorate General of Foreign Trade and submit to DGFT, a copy of Bill of Entry into the destination State Party within 30 days of delivery. Note: Where reference is made below to groups of dialkylated chemicals, followed by a list of alkyl groups in parentheses, all chemicals possible by all possible combinations and alkyl groups listed in parentheses are included unless explicitly exempted. 1. Amiton 0,0-Diethyl S-[2-(diethylamino) ethyl)] phosphorothiolate and correspo ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... phonic Acid, Methyl-compound with (aminoimino methyl) urea (1: 1) 2B04 84402-58-4 29209047 14. 1-Propanaminium N, N, N-trimethyl - 3- [1-oxo-9 octadecenyl) amino]-. (Z)- methyl methylphosphonate 2B04 70055-71-9 29209048 15. Phosphonic acid, [methyl bis (5-ethyl-2-methyl-2-oxido-1, 3, 2- dioxaphosphorinan-5-yl) methyl] ester 2B04 42595-45-9 29209051 16. Phosphonic acid, [methyl-(5-ethyl-2-methyl 2-oxido-1,3,2-dioxaphosphorinan-5-yl) methyl] ester 2B04 41203-81-0 29209052 17. Phosphonic acid, propyl-dimethyl ester 2B04 18755-43-6 29209053 18. Phosphonous acid, methyl-diethyl ester 2B04 15715-41-0 29209054 19. Phosphonic acid, ethyl- 2B04 6779-09-5 29209055 20. Phosphonic acid, propyl- 2B04 4672-38-2 29209056 21. Phosphinic acid, methyl- 2B04 4206-94-4 29209057 22. Phosphonochloridic acid, methyl-, methyl ester 2B04 1066-52-0 29209058 23. Phosphonothioic dichloride, ethyl- 2B04 993-43-1 29209061 24. Phosphonic acid methyl- 2B04 993-13-5 29209062 25. Phosphonic acid, methyl-, dimethyl ester 2B04 756-79-6 29209063 26. Phosphonic dichloride, methyl- 2B04 67 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... -67-9 28121042 13. Sulphur dichloride 3B13 10545-99-0 28121043 14. Thionyl Chloride 3B14 7719-09-7 28121047 15. Ethyldiethanolamine 3B15 139-87-7 29221211 16. Methyldiethanolamine 3B16 105-59-9 29221212 17. Triethanolamine 3B17 102-71-6 29221300 Category 2 Micro-organisms, toxins 2A Bacteria, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures for the following: 2A001 Bacillus anthracis 2A002 Bordetella bronchoseptica 2A003 Brucella abortus 2A004 Brucella melitensis 2A005 Brucella suis 2A006 Chlamydia psittaci 2A007 Clostridium botulinum 2A008 Clostridium perfringes 2A009 Corynebacterium diphtheria 2A010 Francisella tularensis 2A011 Klebsiella pneumonia 2A012 Legionlla pneumophila 2A013 Leptospira interrogans - all serotypes reported in India 2A014 Mycobacterium bovis 2A015 Mycobacterium tuberculosis 2A016 Mycoplasma mycoides - var mycoides 2A017 Mycoplasma mycoides - var Capri 2A018 Neisseria meningitides 2A019 Paseturella multicoda type B ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... an hemorrhagic fever virus 2D025 Lymphocytic choriomeningitis virus (LCM) 2D026 Lassa virus 2D027 Marburg virus 2D028 Murrey valley encephalitis virus 2D029 Marchupo virus 2D030 Mason-pfizer monkey virus 2D031 Monkey pox virus 2D032 Newcastle disease virus 2D033 Omsk hemorrhagic fever virus 2D034 Peste des petits ruminant virus 2D035 Porcine enterovirus type I 2D036 Powassan virus 2D037 Rabies virus -all strains 2D038 Respiratory syncitial virus 2D039 Rift Valley Fever virus 2D040 Rinderpest virus 2D041 Sabia virus 2D042 Sheep pox (field strain) 2D043 Sin Nombre virus 2D044 Smallpox virus 2D045 St.Louis encephalitis virus 2D046 Swine Fever virus 2D047 Tick-borne encephalitis virus (Russian Spring Summer Encephalitis virus) 2D048 Teschen disease virus (Porcine entero virus type 1) 2D049 Variola virus 2D050 Venezuelan encephalitis virus 2D051 Vesicular stomatitis virus 2D052 Western encephalitis virus 2D053 Yellow fever virus, 17 D vaccine strain 2E Rickettsials, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately in ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... gsten (CAS 12070-12-1), molybdenum(CAS 1317-33-5), and alloys of those metals in the form of uniform spherical or atomized particles of size less than 500 µm 3A104 Germanium 3A105 Gallium 3A106 Indium 3A107 Titanium alloys including Titanium-stabilised Duplex Stainless Steel (Ti-DSS) (other than as specified at 0A307) 3A108 Aluminium alloys in any form 'capable of acquiring' an ultimate tensile strength of 460 MPa or more at 293 K (20 degrees C) Note: The phrase 'capable of acquiring' encompasses alloys before or after heat treatment 3A109 Bismuth having a purity of 99.99% or greater by weight and containing less than 10 parts per million by weight of silver 3A110 Calcium containing less than 1000 parts per million by weight of metallic impurities other than magnesium and containing less than 10 parts per million by weight of Boron 3A111 Chlorine trifluoride (ClF3) 3A112 Magnesium containing less than 200 parts per million by weight of metallic impurities other than calcium and containing less than 10 parts per million by weight of boron 3A113 (a) Tungsten, tungsten carbide, and alloys containing more than 90% tungsten by weight in forms with a hollow cy ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... terials specially designed for rocket systems (including ballistic missile systems, space launch vehicles and sounding rockets), unmanned aerial vehicles and cruise missiles; c. Fine grain re-crystalised bulk graphites and pyrolytic or fibrous reinforced graphites usable for rocket nozzles and re-entry vehicles nose tips; d. Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in missile radomes; e. Materials and coatings for reduced radar reflectivity; f. Bulk machinable silicon-carbide reinforced unfired ceramic usable in re- entry vehicles nose tips. g. Reinforced silicon-carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in complete rocket systems of 5A and complete unmanned aerial vehicles of 5B . 3A3 Rocket propellants and constituent chemicals: 3A301 Propulsive substances - Hydrazine (CAS-302-01)and its derivatives usable as rocket fuel substances including Monomethylhydrazine (MMH)(CAS 60-34), Unsymmetrical di-methyl hydrazine (UDMH), (CAS 57-14-7)Hydrazine nitrate, (except aromatic hydrazines and their salts, adipic acid dihydrazide), ammonium perchlorate, spherical or ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... rocene; 9. Dipropyl ferrocene; 10. Dibutyl ferrocene(CAS 1274-08-4); 11. Dihexyl ferrocene (CAS 93894-59-8); 12. Acetyl ferrocenes; 13. Ferrocene Carboxylic acids; 14. Butacene; c. Other ferrocene derivatives usable as rocket propellant burning rate modifiers. 3A310 Nitrate esters and nitrated plasticisers as follows: a. Triethylene glycol dinitrate (TEGDN); b. Trimethylolethane trinitrate (TMETN)(CAS 3032-55-1) ; c. 1,2,4-butanetriol trinitrate (BTTN)(CAS 6659-60-5) ; d. Diethylene glycol dinitrate (DEGDN); e. 4,5 diazidomethyl-2-methyl-1,2,3-triazole (iso-DAMTR); f. Nitratoethylnitramine (NENA) based plasticisers, as follows: 1. Methyl-NENA (CAS 17096-47-8); 2. Ethyl-NENA (CAS 85068-73-1); 3. Butyl-NENA (CAS 82486-82-6); g. Dinitropropyl based plasticisers, as follows: 1. Bis (2,2-dinitropropyl) acetal (BDNPA) (CAS 5108-69-0); 2. Bis (2,2-dinitropropyl) formal (BDNPF) (CAS 5917-61-3). 3A311 Stabilisers as follows: a. 2-Nitrodiphenylamine (CAS 119-75-5); b. N-methyl-p-nitroaniline (CAS 100-15-2). 3A4 High explosives 3A401 High explosives, and propellants or mixtures containing any of the following; a. Cycloteramethylenetetranitram ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... he above process. c. Equipment and process controls and specially designated software thereof, specially designed or modified for densification and pyrolysis of structural composite rocket nozzles and re-entry vehicle nose tips. 3B007 Production equipment usable for or specially designed or modified for production, handling, mixing, curing, casting, pressing, machining, extruding or acceptance testing of the solid or liquid rocket propellants or rocket propellant constituents and related technology. 3B008 Refrigeration units and equipment capable of cooling hydrogen or helium to -250 degrees Celsius (23K) or lower. 3B009 Continuous nitrators. 3B010 Dehydration presses. 3B011 Screw extruders usable for or specially designed or modified for high explosive extrusion. 3B012 Cutting machines for the sizing of extruded propellant. 3B013 Sweetie barrels (tumblers) 1.85 m or more in diameter and having over 227 kg product capacity; 3B014 Continuous mixers or batch mixers with provision for mixing under vacuum. 3B015 Fluid energy mills usable for grinding or milling any of the items in 3A3. 3B016 Equipment to achieve both sphericity and uniform particle size in metal ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... er capacity glass or ceramic-ware include standard laboratory equipment such as test tubes, flasks, retorts etc. 3D002 Incinerators designed to destroy any chemicals specified in Category 1. 3D003 Combustors or pyrolysers capable of a heat-zone ('burner') temperature greater than 1,273 K (1000 Degree Centigrade), and in which any surfaces that come into direct contact with material coming into the containing chamber are made from, or lined with, any of the following materials: a. Alloys with more than 25% nickel and 25% chromium by weight; (e.g., 'Hatelloy', 'Illium', 'Inconel', 'Incoloy') b. Nickel, or alloys with more than 40% nickel by weight; or c. Titanium; d. Ceramics. 3D004 Equipment related to P3, P4 facilities such as protective suits and class III safety cabinets. No licenses shall be granted for complete containment facilities at P3, P4, containment level as specified in the World Health Organization (WHO) bio-safety manual. 3D005 Technology related to the development, production or use of items in 3D. Category 4 Nuclear-related other equipment, assemblies and components; test and production equipment; and related technology not controlled under Categor ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l-internal grinding machines having all the following characteristics: a. Limited to cylindrical grinding; b. A maximum work-piece outside diameter or length of 150 mm; c. Not more than two axes that can be coordinated simultaneously for contouring control; and d. No contouring c-axis; 2. Jig grinders with axes limited to x, y, c, and a, where c-axis is used to maintain the grinding wheel normal to the work surface, and the a-axis is configured to grind barrel cams; 3. Tool or cutter grinding machines with software specially designed for the manufacturing of tools or cutters; 4. Crankshaft or camshaft grinding machines. d. Non-wire type Electrical Discharge Machines (EDM) that have two or more contouring rotary axes and that can be coordinated simultaneously for contouring control. Note: Stated positioning accuracy levels derived under the following procedures from measurements made according to ISO 230/2 (1988) or national equivalents may be used for each machine tool model if provided to, and accepted by, national authorities instead of individual machine tests. Stated positioning accuracy are to be derived as follows: 1. Select five machines of a model to be evaluated ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cteristics: a. Contain a laser; and b. Maintain for at least 12 hours, over a temperature range of ± 1 K around a standard temperature and a standard pressure: 1. A resolution over their full scale of 0.1 µm or better; and 2. With a measurement uncertainty equal to or better (less) than (0.2 + L/2000) µm (L is the measured length in millimetres); Note: Item 4A003b3 does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine tools, dimensional inspection machines, or similar equipment. Technical Note: In Item 4A003b 'linear displacement' means the change of distance between the measuring probe and the measured object. c. Angular displacement measuring instruments having an angular position deviation equal to or better (less) than 0.00025°; Note: Item 4A003c does not control optical instruments, such as autocollimators, using collimated light to detect angular displacement of a mirror. d. Systems for simultaneous linear-angular inspection of hemi-shells, having both of the following characteristics: 1. Measurement uncertainty along any linear axis equal to or b ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... pecially designed for vibration testing, with a real-time bandwidth greater than 5 kHz and being designed for a system specified in Item 4A006a; c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force of 50 kN or greater measured 'bare table', which are usable for the systems specified in Item 4A006a; d. Test piece support structures and electronic units designed to combine multiple shaker units into a complete shaker system capable of providing an effective combined force of 50 kN or greater, measured 'bare table,' which are usable for the systems specified in Item 4A006a. Technical Note : In Item 4A006 'bare table' means a flat table, or surface, with no fixtures or fittings. 4A007 Vacuum or other controlled atmosphere metallurgical melting and casting furnaces and related equipment, as follows: a. Arc re-melt and casting furnaces having both of the following characteristics: 1. Consumable electrode capacities between 1000 and 20000 cm3; and 2. Capable of operating with melting temperatures above 1973 K (1700 °C); b. Electron beam melting furnaces and plasma atomisation and melting furnaces, having both of the follow ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... hangers in Item 4A011 are also known as converters or inverters. 4A012 Lasers, laser amplifiers and oscillators as follows: a. Copper vapour lasers having both of the following characteristics: 1. Operating at wavelengths between 500 and 600 nm; and 2. An average output power equal to or greater than 40 W; b. Argon ion lasers having both of the following characteristics: 1. Operating at wavelengths between 400 and 515 nm; and 2. An average output power greater than 40 W; c. Neodymium-doped (other than glass) lasers with an output wavelength between 1000 and 1100 nm having either of the following: 1. Pulse-excited and Q-switched with a pulse duration equal to or greater than 1 ns, and having either of the following: a. A single-transverse mode output with an average output power greater than 40 W; or b. A multiple-transverse mode output with an average output power greater than 50 W; or 2. Incorporating frequency doubling to give an output wavelength between 500 and 550 nm with an average output power of greater than 40 W; d Tuneable pulsed single-mode dye laser oscillators having all of the following characteristics: 1. Operating at wavelengths between 300 and 800 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cially designed for and exported as part of medical nuclear magnetic resonance (NMR) imaging systems. ('As part of' does not necessarily mean physical part in the same shipment. Separate shipments from different sources are allowed, provided the related export documents clearly specify the 'as part of" relationship.) 4A015 High-power direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 100 V or greater with current output of 500 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A016 High-voltage direct current power supplies having both of the following characteristics: a. Capable of continuously producing, over a time period of 8 hours, 20 kV or greater with current output of 1 A or greater; and b. Current or voltage stability better than 0.1% over a time period of 8 hours. 4A017 Pressure transducers capable of measuring absolute pressures at any point in the range 0 to 13 kPa and having both of the following characteristics: a. Pressure sensing elements made of or protected by aluminium, aluminium alloy, nickel, or nickel alloy ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... wing characteristics: 1. Swing or journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; and 3. Capable of balancing speed of revolution greater than 5000 rpm; b. Centrifugal balancing machines designed for balancing hollow cylindrical rotor components and having all of the following characteristics: 1. Journal diameter greater than 75 mm; 2. Mass capability of from 0.9 to 23 kg; 3. Capable of balancing to a residual imbalance equal to or less than 0.010 kg x mm/kg per plane; and 4. Belt drive type. 4A022 Filament winding machines and related equipment, as follows: a. Filament winding machines as specified in 5A206. b. Coordinating and programming controls for the filament winding machines specified in Item 4A022a; c. Precision mandrels for the filament winding machines specified in Item 4A022a. 4A023 Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater. Notes: 1. Item 4A023 includes separators capable of enriching stable isotopes as well as those for uranium. 2. A separator capable of separating the isotopes of lead with a one-mas ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... both of the following characteristics: a. Designed for operation with an outlet temperature of 35 K (- 238 ºC) or less; and b. Designed for a throughput of hydrogen gas of 1000 kg/h or greater. 4A028 Water-hydrogen sulphide exchange tray columns and internal contactors, as follows: a. Water-hydrogen sulphide exchange tray columns, having all of the following characteristics: 1. Can operate at pressures of 2 MPa or greater; 2. Constructed of carbon steel having an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; and 3. With a diameter of 1.8 m or greater; b. Internal contactors for the water-hydrogen sulphide exchange tray columns specified in Item 4A028a. Note: For columns which are especially designed or prepared for the production of heavy water, see Prescribed Equipment (0B002). Technical Note: Internal contactors of the columns are segmented trays which have an effective assembled diameter of 1.8 m or greater; are designed to facilitate counter current contacting and are constructed of stainless steels with a carbon content of 0.03% or less. These may be sieve trays, valve trays, bubble cap trays or turbo grid trays. 4A029 Hydrogen- ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ating cavities, the time duration of the beam pulse is the lesser of 1 µs or the duration of the bunched beam packet resulting from one microwave modulator pulse. 4. In machines based on microwave accelerating cavities, the peak beam current is the average current in the time duration of a bunched beam packet. 4B003 Multistage light gas guns or other high-velocity gun systems (coil, electromagnetic, and electrothermal types, and other advanced systems) capable of accelerating projectiles to 2 km/s or greater. 4B004 Mechanical rotating mirror cameras, as follows, and specially designed components therefor: a. Framing cameras with recording rates greater than 225000 frames per second; b. Streak cameras with writing speeds greater than 0.5 mm/µs. Note: In Item 4B004 components of such cameras include their synchronizing electronics units and rotor assemblies consisting of turbines, mirrors, and bearings. 4B005 Electronic streak cameras, electronic framing cameras, tubes and devices, as follows: a. Electronic streak cameras capable of 50 ns or less time resolution; b. Streak tubes for cameras specified in Item 4B005a; c. Electronic (or electronically shuttered) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... a chemical detonation in a contacting high-explosive material such as PETN (pentaerythritoltetranitrate). In slapper detonators, the explosive vaporization of the electrical conductor drives a flyer or slapper across a gap, and the impact of the slapper on an explosive starts a chemical detonation. The slapper in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator. Also, the word initiator is sometimes used in place of the word detonator. 4B009 Firing sets and equivalent high-current pulse generators, as follows: a. Explosive detonator firing sets designed to drive multiple controlled detonators specified by Item 4B008 above; b. Modular electrical pulse generators (pulsers) having all of the following characteristics: 1. Designed for portable, mobile, or ruggedized-use; 2. Enclosed in a dust-tight enclosure; 3. Capable of delivering their energy in less than 15 µs; 4. Having an output greater than 100 A; 5. Having a 'rise time' of less than 10 µs into loads of less than 40 ohms; 6. No dimension greater than 25.4 cm; 7. Weight less than 25 kg ; and 8. Specified to operate over an e ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ocket engines and their control systems including liquid propellant apogee engines designed or modified for satellites. Note: 5A101 does not control JATO units, propulsion units for flares, ejection seats, emergency escape equipment and rockets for display fireworks. 5A102 Subsystems and components usable in missiles and rockets including: a. rocket motor cases, interior lining, insulation and nozzles; b. rocket staging mechanisms, separation mechanisms and inter-stages; c. liquid and slurry propellant (including oxidizers), control systems, and components thereof, specially designed or modified for resistance to vibration; d. re-entry vehicles and equipment including 1. Heat-shields and components thereof, fabricated of ceramic or ablative materials; 2. Heat sinks and components thereof, fabricated of light weight, high heat capacity materials; 3. Electronic equipment specially designed for re-entry vehicles. e. guidance systems and their components such as gyros and inertial reference units; f. thrust-vector control subsystems including methods of achieving thrust vector control such as flexible nozzle, fluid or secondary gas injection, movable engine or nozzle, defl ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mbers simulating vibration environments, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A210 Environmental chambers simulating acoustic pressure level of 140 dB or greater or rated acoustic power output of 4 KW or greater, with altitudes equal to or greater than 15 km, or temperature ranging between minus 50 and plus 125 degrees centigrade. 5A211 Accelerators delivering electro-magnetic radiation produced by Bremsstrahlung from accelerated electrons. 5A212 Pulsed electron accelerators 5A213 Radial ball bearings having all tolerances specified in accordance with ISO 492 Tolerance Class 2 or better and having all the following characteristics: a. An inner ring bore diameter between 12 and 50 mm; b. An outer ring outside diameter between 25 and 100 mm; and c. A width between 10 and 20 mm. 5A214 Liquid propellant tanks specially designed for the propellants controlled in Item 3A3 or other liquid propellants used in the systems specified in 5A and 5B. 5A215 Production facilities and production equipment specially designed for equipment or materials for 5A101 and 5A102. 5A216 Production equipme ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... and 5A2. 5A302 Software for the development, production, and testing and use of items in 5A1 and 5A2. 5A303 Software which coordinates the function of more than one subsystem, specially designed or modified for use in the systems specified in 5A1 and 5A2. 5B Unmanned aerial vehicles including cruise missiles, target drones and reconnaissance drones and related equipment, and specially designed components therefor: a. Unmanned aerial vehicles including Remotely Piloted air Vehicles (RPVs) and autonomous programmable vehicles; b. Associated launchers and ground support equipment; c. Related equipment for command and control; d. Complete unmanned aerial vehicle systems (including cruise missile systems, target drones and reconnaissance drones); e. Light weight Turbojet and turbofan engines (including turbo compound engines);. f. Ramjet / Scramjet / pulse jet/ combined cycle engines, including devices to regulate combustion, and specially designed components; g. Complete unmanned aerial vehicle systems having an autonomous flight control and navigation capability or capability of controlled flight out of the direct vision range involving a human operator, designed or modi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ; b. Attitude control equipment; c. Design technology for integration of flight control, guidance, and propulsion data into a flight management system for optimisation of rocket system trajectory; d. Specially designed test, calibration, and alignment thereof. 5C007 1. Integrated navigation system incorporating an inertial measurement device (example: an attitude and heading reference system, inertial reference unit, or inertial navigation system); one or more external sensor used to update the position and/or velocity, either periodically or continuously throughout the flight (example: satellite navigation receiver, radar altimeter and/or Doppler radar); integration hardware and software. 2. Three axis magnetic heading sensors having all of the following characteristics, and specially designed components therefor: a. Internal tilt compensation in pitch (+/- 90 degrees) and having roll (+/- 180 degrees) axes. b. Capable of providing azimuthal accuracy better (less) than 0.5 degrees rms at latitudes of +/- 80 degrees, referenced to local magnetic field; and c. Designed or modified to be integrated with flight control and navigation systems. Note: Flight control and navigat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... X-rays, combined blast and thermal effects). 5C013 Radiation Hardened microcircuits usable in protecting rocket systems, unmanned aerial vehicles and cruise missiles against nuclear effects (e.g. electro-magnetic pulse (EMP), X-rays, combined blast and thermal effects). 5C014 Precision tracking systems using a code translator installed on the rocket or unmanned aerial vehicle in conjunction with either surface or airborne references or navigation satellite systems to provide real-time measurement of inflight position and velocity; Range instrumentation radars including associated optical/infrared trackers and related software. 5C015 Balancing machines capable of balancing rotors/assemblies and correcting unbalance in two planes or more. 5C016 Indicator heads or balancing instrumentation designed or modified for use with balancing machines. 5C017 Motion simulators or rate tables having all of the following characteristics: a. Two axes or more; b. Designed or modified to incorporate slip rings or integrated non-contact devices capable of transferring electrical power, signal information, or both; and c. Having any of the following characteristics: 1. For any single ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ult, military training, transporting and airdropping troops or military equipment, logistics support, and specially designed components thereof; b. Aero-engines specially designed or modified for military use, and specially designed components thereof; c. Airborne equipment, including airborne refuelling equipment, specially designed for use with the aircraft controlled by 5D001a or 5D001b or the aero-engines controlled by 5D001c, and specially designed components thereof; d. Pressure refuellers, pressure refuelling equipment, equipment specially designed to facilitate operations in confined areas and ground equipment, developed specially for aircraft controlled by 5D001a or 5D001b or for aeroengines controlled by 5D001c; e. Pressurized breathing equipment and partial pressure suits for use in aircraft anti-g suits, military crash helmets and protective masks, liquid oxygen converters used for aircraft or missiles, and catapults and cartridge actuated devices for emergency escape of personnel from aircraft; f. Parachutes: 1. Paragliders, drag parachutes, drogue parachutes for stabilization and attitude control of dropping bodies, (e.g. recovery capsules, ejection seats, bombs ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... integrated circuit will be used is unknown, Fast Fourier Transform (FFT) processors, electrical erasable programmable read-only memories (EEPROMs), flash memories or static random-access memories (SRAMs), having any of the following: a. Rated for operation at an ambient temperature above 398 K (+125°C); b. Rated for operation at an ambient temperature below 218 K (-55°C); or c. Rated for operation over the entire ambient temperature range from 218 K (- 55°C) to 398 K (+125°C). 7A006 Radiation-hardened analogue-to-digital and digital-to-analogue converter integrated circuits, as follows: a. Analogue-to-digital converters having any of the following: 1. A resolution of 8 bit or more, but less than 12 bit, with a total conversion time of less than 5 ns; 2. A resolution of 12 bit with a total conversion time of less than 200 ns; or 3. A resolution of more than 12 bit with a total conversion time of less than 2 µs; b. Digital-to-analogue converters with a resolution of 12 bit or more, and a settling time of less than 10 ns. 7A007 Detector units operating in the thermal infrared, ultraviolet, x-ray and gamma ray spectrum. 7A008 Focal plane assemblies ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
