9911796707
TMI BlogLaunch of Indian Customs EDI System- (ICES 1.5) for Imports and Exports, at OKHA PORT (INOKH1)X X X X Extracts X X X X X X X X Extracts X X X X ..... essed copy of the Bill of Entry when the same is presented in the Import Shed for the clearance of goods. The requisite documents also can be called for by the Appraising Group, if required, while acting on the Bills of Entry. There are certain pre-requisites for filing the electronic declarations which are required to be complied with before filing the Bill of Entry. 1.1 Registration of IE-Code of the Importer (i) IE-Code is being issued to the importers by DGFT, details of which are transmitted online to the Indian Customs EDI-System (ICES) on a daily basis. ICES automatically register the IE-Codes after confirming its validity to enable the importers to file the Bill of Entry electronically. Before filing the Bill of Entry, the importers are advised to check from the DGFT as to whether their IE-Code has already been transmitted to ICES. If their IE-Code has not been transmitted to the ICES by the DGFT, they should first get the same transmitted from DGFT, failing which they will not be able to file Bill of Entry electronically for the clearance of the imported goods. (ii) In case the IE-Code is registered for exports, the same shall hold good for imports also. The DGF ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ive field while making entry of B/E data and should be presented along with assessed copy of B/E at the time of taking out of charge, to the Customs officer. 1.5 Currency Codes For indicating value of goods, freight, insurance, commission, etc., codes specified against the respective currencies indicated in the list of currency codes appended with this Public Notice should only be used. Incorrect code will result in incorrect conversion of Indian Rupees. List of Currency Codes attached as Appendix 4. 1.6 Units of Measurement Codes Against any quantity of goods, appropriate Code indicated against the respective measurement in the list appended with this Public Notice should only be used in the Bill of Entry and IGM, as the case may be .It is further informed that if UQCs, other than the Standard UQCs of the customs tariff are used, the B/E may not get any facilitation in RMS. Reference is also invited to the CBEC Circular No. 26/2013 Customs, dated 19/07/2013, where adherence to Standard Unit Quantity Codes as prescribed in the Customs Tariff Act has been prescribed. List of Measurement Codes attached as Appendix 5. 1.7 Country Codes: Wherever in the Bil ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... five items: ₹ 10 (iii) IGM: ₹ 80 (iv) EGM: ₹ 80 (v) Other documents (such as UAB, Transshipment etc): ₹ 80 (vi) Amendments to original declaration by customer in BE/SB/Other documents: ₹ 10 (vii) Queries (including reply feeding): Nil for 3 queries and ₹ 10 for each query thereafter. (viii) Printing check list: NIL (ix) Printing of assessed documents (SB/BE/ OOC/ LEO/Challan etc): NIL II. SERVICE CHARGES FOR RES‟ DOCUMENTS ICEGATE or any other manner of Remote EDI filing: (i) Printing of Document: ₹ 30 [for the first 50 pages and ₹ 10 for every 10 subsequent pages or parts thereof (documents refers to the set of papers, which get printed in one command at any stage of processing)] (ii) Query Printing: ₹ 10 (iii) Amendments fee to Bill of Entry (for block of five items):Rs.20 (iv) Amendments fee to Shipping Bill (for block of five items):Rs.10 (v) Amendment fee - Each Additional block of five items: ₹ 10 (vi) Amendment fee Other documents: ₹ 10. (vii) Printing Check list: ₹ 10 Note 1:- The above charges are excluding Service Tax. The vendor shall co ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nts applied before grant of Entry Inwards in System do not require Assistant Commissioner (Import)‟s approval and the same can be carried out. (ii) All such amendments made after grant of Entry Inwards will require Assistant Commissioner (Import)‟s approval. (iii) IGM messages to custodians would be sent at the time of grant of entry inwards instead at the time of online submission, so that substantially complete IGM is sent to custodian. 3. Cargo/Goods Declaration The Importer or the Customs Broker, as the case may be, can file electronic Bill of Entry by data entry at the service centre operator or by transmitting the details in specified file format through ICEGATE from his premises. 3.1 Filing through Service Centre (i) The Customs Broker/Importer should furnish information in Annexure C' and present the same to the service centre operator along with copy(ies) of import invoice and packing list. Details of information in Annexure C‟ should be correct, complete and legible. Incorrect and invalid entries may get rejected on entry of data. The Service center shall accept the declarations in Annexure C during the working hours of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 1/02, Sr.No.363 (viii) The Service Centre Operator shall carefully enter the data in the system as is indicated in Annexure C‟. On completion of entry of data, the system shall assign a Job No. and generate a Check List which is a draft Bill of Entry. The service centre operator shall print a copy of the Check List and hand over the same to the Customs Broker/Importer. The Customs Broker/Importer shall check the correctness of the data entered in the system. If any error is noticed, the error shall be circled in bold ink and correct detail should be written. The corrected check list duly signed by the Customs Broker/Importer should be handed over to the service centre operator for entry of corrected data. The Operator shall make corrections in the corresponding data and hand over the revised checklist to the Customs Broker/Importer for re-confirmation. This process would be repeated till the Customs Broker/Importer signs a clean checklist in token of correctness of the entered data. (ix) The Operator shall submit the authenticated electronic checklist to the system. The system will then generate a B/E. No., which would be endorsed on the printed checkli ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... . The data so integrated will also have a flag to indicate that the submitted document was digitally signed. (v) The Customs officers will be able to identify on the system whether a particular electronic document has been filed after signing with Digital Signature Certificate or not; (vi) On successful submission of data from their premises the ICES will generate Bill of Entry Number and return message of Bill of Entry No. If invalid data is entered an error message shall be generated and no B.E. No. shall be generated. In case of remote filing of Bill of Entry the Customs broker /Importer has to ensure correctness and validity of data entered failing which the data will either be rejected by the ICES or incorrect information shall be incorporated in the submitted Bill of Entry which shall lead to problems of amendments. Remote EDI filing software from NIC website link which has been provided at ICEGATE website. Software of NIC is free of charge. (vii) The instructions specified in 3.1 (iii) to (vii) may be kept in mind while Filing in RES software too. 3.3 Self Assessment The bill of entry shall be deemed to have been filed and self-assessment of duty completed w ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of duty exemption import license by the importer. Therefore, processing of Bills of Entry will be taken up by the appraising officer only on receipt of the required documents. (iv) Movement of Bills of Entry from one officer to another takes place automatically in a pre-determined workflow basis depending on roles and jurisdiction assigned to them. During the processing of Bill of Entry, the officer concerned may raise Query to the importer for further clarification/information. The Query on approval by the concerned AC/DC shall be transmitted to the importer for online reply. Such a Bill of Entry on which query has been raised, is automatically pulled out of assessment queue till reply online/through service center is received from the importer. 4.1 RMS facilitation. Facilitation of Bills of Entry in respect of certain goods using RMS for faster clearance of such goods Bills of Entry in respect of the items under RMS facilitation would be assessed for risk by the System immediately on their submission and a print out of the assessed Bill of Entry along with 3 copies of TR-6 challans will be made available to the Customs Brokers/ Importers for payment of duty and getting ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ustoms Broker/ importer gets a copy of First Check B/E printed with Examination Order‟ at the Service Centre‟ or in his office, as the case may be. (ii) After the examination is completed, the Import Shed Examiner/Inspector and Appraiser/Superintendent shall write the examination report on the first check copy of the Bill of Entry (Hard Copy of B/E) and enter the examination report in the system. The Shed Appraiser/Superintendent shall transfer the B/E to the Appraising Group. The Customs Broker/Importer shall present the first check copy of the Bill of Entry on which examination report has been written along with the original invoice and other import documents necessary for assessment to the concerned Group Appraiser/Superintendent. The Assessing Officer, if satisfied, shall complete the assessment of B/E in the system. After assessment, the Bill of Entry shall move in the system as in the case of second check assessment. The Customs Broker/Importer shall take print of assessed copy of the Bill of Entry and TR-6 challan and shall deposit duty amount with the designated bank. 4.4 Audit After completion of assessment from the Assessing Officer, the B/E will ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nsol Agents in co-operation with Custodians shall provide the Delivery Order electronically in mutually agreed formats and they are not required to visit either of the offices. Secure electronic transmission of Delivery order between shipping lines/consol agents and the custodian will enhance the security and transparency of the cargo as well as expedite the clearance of the cargo. Please refer CBEC Circular No. 24/2015 dated 14/10/2015 regarding Improving Ease of Doing Business Issuance of Electronic Delivery Orders. 6. Examination of Goods 6.1 After examination order in the case of First Check Bill of Entry, after assessment in the case of duty free import where duty assessed is zero and after payment of duty assessed with interest(if any) in case of second check Bill of Entry, the Bill of Entry shall move to the Examination section for goods registration. (i) The Customs Broker/Importer shall present the documents, as per the list below, (the documents should be arranged in a file cover in the following order):- a) Assessed copy of Bill of Entry b) Copy of Delivery Order Bill of Lading c) Invoice in original d) Packing List in original e) Certificate ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... photo copies of Delivery Order, Master Bill of Lading, House Bill of Lading should be attached instead of originals. 6.4 On the basis of the examination report, the Appraising Group may revise the assessment or raise a further query to the importers, if necessary. 6.5 After completion of the examination of the goods, if the Shed Appraiser/ Superintendent are satisfied that the requirement of Section 47 of the Custom Act, 1962 have been complied with, he shall give, Out of Charge for the Bill of Entry on system. 6.6 After the out of charge order, the system will generate print of Importer s copy and Exchange Control copy of the Bill of Entry along with 3 copies of Order of Clearance. Print of the same shall be obtained from the designated computer terminal. The print copies of the Bill of Entry shall bear the Order of Clearance number and name of the examining Appraiser/Supdt. The importer s copy of the Bill of Entry along with one copy of the order of clearance will be attached to the Customs copy of the Bill of Entry retained by the Shed Appraiser/Supdt. The importer shall present the remaining two copies of the order of clearance to the Custodian along with the importer ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ntry. 8.2 After Out of Charge Order, no amendment shall be allowed in the Bill of Entry. However, in case amendment is warranted after Out of Charge Order but before delivery of goods, the System Manager can cancel the out of charge Order in the system. The original prints of the Importer s copies and Exchange Control copies of the Bill of Entry shall be retained by the System Manager in a file. After fresh Out of Charge Order, new prints of the copies of Bill of Entry shall be given. 9. Re-assessment Any time after assessment and before Out of Charge Order, a Bill of Entry can be recalled and reassessed and put to reassessment by the AC/DC concerned, if it so warranted for any reason. 10 Advance Noting Advance B/E can also be filed in the ICES before the arrival of the vessel. In such cases, a B/E may be presented before the delivery of the import manifest, if the vessel by which the goods have been shipped is expected to arrive within 30 days from the date of presentation. The Customs Broker/ Importer may file an Advance B/E if he has the copies of the Bill of Lading and the invoice. The B/E would be filed and assessed in the same manner as indicated above. On ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ated 7.04.1997 against a DEPB, the license in question is required to be registered in the import system. The officer designated by the Asstt./Dy. Commissioner to register the DEPB in the system shall ensure that verification of DEPB with reference to the exports on the basis of which DEPB is issued by DGFT has been done prior to its registration in imports. (ii) All importers/CHAs are advised to ensure that their IEC details with PAN have been transmitted by DGFT to the Customs at the time of obtaining the DEPB. The Customs Broker/Importer shall furnish details of DEPB license in the pro-forma given as ANNEXURE A. (iii) The designated officer shall make data entry of the DEPB details in the system. After entry of data, a checklist will be printed. The DEPB holder shall verify the details of DEPB in the checklist sign the check list and return the same to the officer. The officer shall then complete the registration process in the System. After the DEPB is registered in ICES, a registration number shall be generated by ICES which will be endorsed on the face of the original DEPB in bold figures with the name of CUSTOMS STATION at which registered. For further activities, ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... and returned to the proper officer who will exercise the option for issue of TRA in the System. The System shall generate three copies of the Release Advice titled as: 1. Customs copy for port of issue (office copy), 2. Customs copy for port of clearance and 3. Importer‟s copy. (iv) The office copy for port of issue shall be retained by the TRA issuing Customs Station and placed in the respective TRA file. Customs copy for the port of clearance will be dispatched to the respective Customs Station and the importers copy of TRA shall be handed over to the applicant. (v) The requirement of production of original DEPB license with incoming or outgoing TRAs at the respective port of clearance shall continue as per the instructions issued from time to time in this behalf. 11.5 Re-credit of unutilized Release Advices Any unutilized credit in the Release Advice may be re-credited to the DEPB by the Assistant/Deputy Commissioner. A certificate of unutilized portion shall be generated at the port for which the TRA had been issued on the basis of which the balance in the DEPB license shall be re-credited by the TRA issuing authority. 11.6 Claim of Exemption ag ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ed to do so. If the entries are correct, the checklist may be returned to the data entry operator for submission of B/E in the System. Errors, if any, noticed may be got corrected by the data entry operator. 11.8 Submission of B/E On submission of the B/E in the System, an UN-ASSESSED copy of the B/E will be printed by the System containing statement of debit of DEPB for export FOB and duty amount in respect of each item of an invoice for which exemption is claimed against DEPB. 11.9 Assessment of B/E (i) The un-assessed copy of the B/E along with all the original import documents and all the DEPB license/scripts in original indicating total amount of duty credit and export FOB utilized, in the debit sheet attached to the scrips, should be presented to the import Appraiser/Superintendent for assessment and signatures on the debit sheets of the DEPB scrips. The Appraiser/Supt. will retrieve the B/E on screen and assess the B/E in respect of all the items and shall countersign the debits in the original DEPB. The System will determine the duty amount on the basis of CIF/Quantity of goods and shall debit the duty from the DEPB credit ledger and the CIF from the FOB of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... accordingly. 11.11 Debiting of DEPB against Manual B/E (i) If a Bill of Entry is processed manually, importers may choose to avail the exemption under the DEPB Scheme and get the DEPB debited for exempted amount of duty. In such cases, manual B/E will be assessed as usual. After assessment, the amount of duty forgone due to exemption under DEPB and the CIF of goods imported being cleared against DEPB will be computed manually in respect of each DEPB scrip. (ii) The designated officer in the assessing group will debit the original DEPB. He will also enter the amount of duty foregone and the CIF of the exempted goods in the System, in the respective field of duty credit and export FOB. The debit screen can be accessed through the DEPB Registration Number. After debiting, the System will print the statement of debits of the DEPB in triplicate. The copies of this print will be attached with the manual B/E, DEPB file and DEPB scrip. Importers are therefore required to register the DEPB license even when clearances are sought against manually assessed B/E 12. Processing of B/E under Other Export Promotion Schemes Requiring Import License Bills of Entry relating to Exp ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... a procedure for online transmission of Shipping Bills and Licenses/Authorizations issued under Duty Entitlement Pass book Scheme (DEPB), Duty Exemption Scheme (DES) and Export Promotion Capital Goods Scheme (EPCG) from DGFT to Customs and vice versa through an Electronic Message Exchange System is in operation at all EDI Ports/ICES locations. (iii) The licenses, which have already been partially utilized, will be registered in the system only for the balances available. (iv) After successful entry of details, a check list will be printed by the registration clerk and given to the license holder for confirming the correctness of the data entered. Registration clerk will make correction, if any and will return the same to the license holder. It is the sole responsibility of the license holder to verify and confirm the correctness of the data entered before proceeding further. License should not be sent by post or through a letter to custom house but should be presented by a person who shall get the data entry done, verify the correctness of data on the check list and shall present the license to the Appraiser for registration and take possession of the same after registration. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... registration, Customs copy and importer s copy of TRA will be defaced by the Officer. 12.5 Issuing TRAs Transfer Release Advice will be issued for utilization of a license at any other Customs station. No TRA needs to be issued for Customs location operating of ICES Version 1.5. TRA shall be issued only for non-ICES location. All TRAs against the licenses registered in the system shall only be generated from system. Details for obtaining Release Advice shall be furnished in the Format given at Annexure-D . Data entry will be done by the registration clerk. A check list will be printed for verifying the correctness by the applicant and for his signatures. Correction, if any, will be carried out by the registration clerk. The authorized Appraiser will thereafter verify the details from the original license and satisfy himself about admissibility of issue of TRA. The system will generate TRA No. and three copies of the TRA will be available for print. The check list signed by the license holder and the office copy of the TRA will be retained by the Appraiser for record. No amendment of TRA will be permitted after it has been issued by system. Fresh TRA can be obtained for an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... hould be furnished in respective column at S. No. 39.E of the Annexure C . (ii) Unit of measurement of qty. will be the same as per the license. In case the unit of measurement in the invoice is different than the one in the license, for the purpose of debit in the license the qty should be converted in to same unit of measurement as in the license. For spare parts against EPCG license, S. No. of item will be 0‟ therefore, for availing benefits of exemption notification in respect of spares Item S. No. 0‟ should be indicated in column 9 of the Format indicated above. Against one item in the B/E, only one license will be debited. If the Qty / or value in the license is not sufficient to cover whole qty / or value of an item in the invoice, the invoice qty should be split in to a separate item in the B/E for debit against another license or for normal assessment. Bond/BG details should also be provided wherever so required. (iii) After successful entry of data of the B/E in the system, a check list will be printed by the service center operator and given to the importer / Customs Broker. The Importer/ Customs Broker will check the details entered in the system an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ing officer can remove the notification and deny the benefits of exemption. The debits of license will automatically reverse when exemption notification is denied. The procedure of assessment will be similar to DEPB imports. (iv) In respect of a manually assessed Bill of Entry, details of value and quantity will be debited in the system by the Appraiser at the time of assessing a B/E a print of details of debit will be taken for records. 12.11 Printing of the Assessed B/E After assessment, the printout of assessed copy of the B/E will be taken by the Importer/Customs Broker from service center. The printout of B/E will contain duty-paying challan if duty is payable and statement of debit of license for value/ qty and debit of Bond for duty foregone in respect of each item. The figures of these debits should be endorsed on the hard copy of the license. 12.12 Examination/Out of Charge Procedure for goods registration, examination, out of charge and printing of B/E after out of charge will remain the same as mentioned above in Para 6. 13. Imports by 100% EOUs:- 13 .1 Registration of EOU All the 100% Export Oriented Units including STP / EHTP, etc. wil ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r C‟ and enter the details of the Bond or the certificate, as the case may be, in the respective field in the system. (iii) In the field of claim of assessment, normal details shall be indicated. However, in the fields of Additional information for claiming benefits under specified exemption schemes , in Col.(I) the prescribed Exim code for the relevant scheme related to imports like EOU/STP/EHTP would be required to be indicated. The Exim codes for the various schemes have already been notified in the Handbook of Procedures issued by the DGFT in column No 2.The relevant applicable exemption notification No /Year .with Sl.No. of item in the notifications is required to be indicated against the respective item. The data entry operator shall enter the code of EOU against the field Exim code after entry of Exim code enter notification no. /yr. S. No. After completion of entry of all the items of the Bill of Entry, a check list will be printed. In the check list against an item where EOU exemption is claimed, the words (EOU) notification no. /yr. S.No. will be printed at the end of the check list, details of Bond indicating the Bond no. Bond code, amount debited ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... with the un-assessed copy of the Bill of Entry. Assessment of the Bill of Entry would be done after due verification of all the concerned documents. System would enable monitoring of the movement of the goods by monitoring the debits against the bond value/ CX certificate value through appropriate MIS reports. Under the present set up, the MIS reporting is not operational through EDI system and the same is being done manually by obtaining the re-warehousing certificate from Central Excise. (v) After completion of the assessment, the Bill of Entry shall be put to Bond queue for execution / debiting of Bond. Where any duty amount has been assessed, the duty shall be deposited in the bank as usual. Unless the Bond Officer completes the action of debiting Bond in the system, the B/E will not be available for registration for examination and out of charge. Procedure for registration of Bond / BG has been explained in Para 21.2 of this Public Notice. 14. Availing Exemption under JOBBING Scheme Notification No.32/97 Cus dated 01.04.97, exempts goods imported for carrying out any job work and re-export subject to conditions specified in the said notification. Importers claimi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... -- Invoice S.No.----------- in Warehouse B/E item of Import intended to be Ex-Bonded Item Quantity of item intended for ex-Bond S.No. in invoice (ii) On out of charge of a Warehouse B/E, the system will create a ledger of quantity in respect of all the items included in Warehousing B/E. For the purpose of filing Ex-Bond B/E in the system, details of Customs Broker the Importer will be entered as usual. In the field of Type of B/E X‟ will enable for entry of Ex-Bond B/E. A window will pop up for Warehouse B/E No. date. On entry of Warehousing B/E No date, the system will capture all the other details from the Warehousing Bill of Entry. Invoice S.No. as in the Warehousing B/E and against this invoice item S.No. and quantity will be entered. The system will proportionately determine the assessable value. All other details of item like the CTH, Customs Notification, CET, Excise Notification, etc., as in the Warehousing B/E will be displayed by the system. Tariff Headings and the Notifications can be changed if, so required. On completion of data entry, a check list will be genera ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the Bond, interest, if any, on the Warehoused goods as chargeable under Section 61of the Custom Act, 1962 as per the rates specified under Section 47(2) of the Act ibid and/or any charges including fine/penalty payable, as provided under Chapter IX of the Customs Act, 1962 have been paid; c) The rate of duty has not undergone any change after assessment and the out of charge. In case any change has taken place after assessment in the tariff or exemption structure having bearing on assessment, the B/E will be referred to the concerned Appraiser/Superintendent for re-confirming the correctness of the assessment. The Appraiser/Superintendent will re-assess the B/E, if so required. The system after re-assessment will generate duty challan for differential amount which will be printed at the service center and duty will be paid at the designated bank. (ii) After satisfying the requirements relating to clearance of the goods, the Superintendent will give out of charge on the system. After out of charge, the system will generate two copies of the Ex Bond B/E. One copy is for the importer and the other copy will be for the Bond Section. No exchange control copy will be generated for ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... End use Bond EU Undertaking UT Re-export Bond RE 17. Certificate from CEX Authorities (i) Where the exemption notification provides for production of a certificate from the jurisdictional Central Excise authorities in terms of the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996, the same should also be registered in the system. For this purpose, the certificate obtained from the central excise office shall be produced to the Appraising Officer, before filing the B/E. The Appraiser/Superintendent shall register the same in the system in the same manner as the Bonds are registered. The system will generate the registration number. This registration number should be communicated to the importer and the original certificate shall be retained in the Assessing Group. Registration number shall be indicated at S.No. 18(c) in the Format for B/E data entry. (ii) Against one B/E only one certificate should be used. The certificate shall be utilized against all such notifications requiring Central Excise certificate. At the time of assessment, the officer may verify the details of goods covered by the certificat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Bond is cancelled will be kept in the related Bond file for the purposes of record. 20 Assessment of Goods under Chapter 55 of Customs Tariff (i) In case of goods of aforesaid Chapter, under certain sub-headings where the duty of Customs under the First Schedule to the Customs Tariff Act, 1975 is chargeable on the basis of value or weight in Kgs. or area in SQM of the textile fabrics covered under the said sub-headings and the duty chargeable will be the highest among the duties so determined on the basis of above mentioned three parameters. It is therefore, necessary to capture qty. in Kgs. and also the qty. in SQM in addition to the value of such goods. Provision has been made in the system to enter qty in Kgs. and qty in SQM in respect of above sub-headings. The system will calculate duty on value, on Kgs. on SQM and will determine the highest among the three amounts. The highest amount will be taken for levy of duty. 40 B.1of Annexure C may be filled up accordingly. (ii) In case quantity of goods in the invoice is in Kgs. as declared in Table A‟ under Details of Description of Items‟, col. (3) in the table B1 of Annexure C should be left blank an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 3. Address 4. Identification particulars of surety (Customs Broker code, Chartered Accountant Registration No. etc.) 5. Remarks Cash Deposit 1. Challan No. 2. Date 3. Amount 4. Date of Deposit (ii) The Bond detail shall be entered in the Bond Section. On entry, system will assign a job no. and check list is generated. The Importer / Customs Broker shall satisfy himself with the correctness of the details. The corrections, if any, shall be made and job shall be submitted. After submission, the job shall be forwarded to designated AC/DC to accept the Bond. The importer shall present the original Bond documents to the respective designated AC / DC for acceptance. (iii) The AC/DC shall observe all the instructions regarding acceptance of Bond issued by the Board / Commissionerate from time to time after satisfying that the documents submitted are in order acceptable. The AC/DC shall retrieve the Bond details on screen by entering the job no., view the entries made in the system. If the information in the system match with the documents conditions for acceptance of the Bonds are satisfied, the AC / DC may accept the Bond in the system. The AC/DC can also ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... On completion of assessment, the Bond requirement details will be printed on the Assessed Copy of the BE. Where the Bond has not been executed before assessment, on completion of assessment and payment of duty (wherever required), the importer is required to execute the Bond in respect of the Bill of Entry in question before goods registration in the Shed. If the Bond has not been executed against the Bill of Entry, the goods registration cannot be done. The Importer has to give a written request to AC/DC for debiting the Bond against a B/E. The importer shall specify the Bond Registration No., B/E No. and Date. The AC (Bond) has to retrieve the Bond and debit the Bond and BG. AC/DC Bond has the option to view the B/E. Before debiting, the system will pose the query Whether the language of the Bond meets the legal requirement of the assessment of the B/E . If the amount to be debited is more than the credit balance in the Bond and BG Ledgers, the system will not allow debit and the AC/DC has to raise a query to the Importer for filing fresh Bond/BG. The system will not allow goods registration and out of charge, if the debit entries not made against the B/E in the Bond and ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... (a) For Warehousing Bill of Entry, the type of Bill of Entry should be indicated as W‟. The importer may indicate the Bond details if a continuity Bond has already been executed in the same manner as has been explained in respect of 100% EOU. The processing of warehousing Bill of Entry shall continue to be as at present in the respective groups on first come first serve basis. (b) The system at the time of assessment of a Warehousing B/E shall display before the Appraiser, the requirement of Bond equal to double the amount of duty payable. The appraiser at the time of the assessment can change the Bond/BG amounts. Where the Bond details have been entered at the time of data entry, the same shall be displayed by the system debit details will be printed on the Bill of Entry. Where Bond has not been debited at the time of data entry of B/E, Bond requirement shall be on the Bill of Entry. (c) The Bond shall be registered with the designated Bond Officer and debited in respect of a B/E. Unless the Bond is debited in the system, Bill of Entry cannot be registered for examination out of charge at the shed / docks. (viii) Provisional Assessments (a) Where an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... eld of invoice details after the field of currency, new fields for indicating the costs incurred over and above the invoice value for purchasing goods on high sea sale have been added. Where such expenses are incurred, (whether actually paid or payable) as a percentage of invoice value, the percentage rate should be indicated in the field Rate . Where a fixed amount is paid or payable over the invoice value such amount should be indicated against the field amount‟ and shall be in Indian Rupees. The additional amount would get distributed proportionately amongst the various items in the invoice for determination of assessable value. In case goods relate to more than one invoices, the High Seas sales charges should be indicated against each invoice, proportionate to the value of goods in the invoice. The system shall add these charges to the CIF value of the goods for computation of assessable value for the purpose of levy of duty. (iii) The data entry operator at the Service Center shall enter these details in the relevant field in the system. These details will be printed on the check list. The IEC the name of the seller of the goods shall also be printed at the end of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... as separate items in the Bill of Entry with a separate unit retail sale price. (iv) The retail sale price would have to be indicated in Rupees and not in any foreign currency and should conform to the provisions of the Legal Metrology Act, 2009 which came into effect from 01.04.2011,the Rules made there under or any other law in this behalf. Quantum of abatement need not be declared since the system would apply the said reduction with reference to the Central Excise Tariff Heading. Details of such items for which Retail Sale Price has been declared may be carefully verified by the Importers/Customs Brokers before handing over the check list to the Service Centre Operator for submission of the Bill of Entry. It may also be ensured that all the articles covered in the invoice are carefully checked and Retail Sale Price declared in respect of all such articles, which require declaration of Retail Sale Price. Provision has also been made for amendment of declared Retail Sale Price at different stages subject to appropriate approvals wherever required. 24. Assessment of Special Valuation Branch Bills of Entry through EDI 24.1 The assessment of provisional SVB Cases shall be car ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... sequence provided in Para 3.2 of the said Circular No. 05/2016. All SVB investigations (other than renewal) where EDD is being obtained are required to be reviewed in terms of the said Para 3.2 of Circular no. 5/2016. In cases where the importers have provided all the requisite documents, EDD should be dispensed forthwith. In cases where EDD is enhanced to 5%, due to non-submission of the documents/information by the importers, for any SVB inquiry the immediate recourse to the appropriate provisions of the Customs Act will be taken by Commissioner for obtaining the documents and dispense the EDD accordingly. 25. Anti-Dumping Duty (i) Notification Directory A directory of the notifications issued by the Central Government notifying the rates of anti-dumping duty has been created in the system. Notifications issued do not have a defined structure; therefore, these notifications have been re-structured in tabulated form providing a unique Serial No. of an item and a unique Serial No of producer/exporter of goods from a specified country. Due to re-structuring of the notifications into a defined format, the Serial No. at which the goods/country/producer/exporter is app ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Notification Directory Directory for Tariff Values has been created in the system as per notification number 036/2001-Customs (NT) dated 3.8.2001, as amended. Contents of the directory are similar to anti-dumping duty directory. The amount indicated in the same column will be rate of Tariff Value per unit of measurement of quantity whereas in the case of anti-dumping duty it will be rate of duty. The rates of value are applicable to imports from all countries and all suppliers in respect of goods specified therein, the S.No. of item in the notification and system directory is the same. (ii) Filing of Bill of Entry The importers are required to declare the Tariff value notification number and S.No. of item in the notification applicable to the goods in question. For the purpose of data entry in the system, the details of Tariff Value should be indicated in Column (3) of the Table 39B (Classification Details) of Appendix-A the Format for Declaration at Service Centre for Data Entry. The extract of the Table is indicated below. 39B. Classification Details (1)Invoice Serial Number (2)Actual Invoice Number (3)Classification Details Item No. ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... prove the quality of assessment, it has been decided to capture the following information about goods imported, in the ICES system at the time of filing of declaration Annexure C‟ . a. Brand b. Model c. Grade d. Specifications e. Any other information relevant for assessment. For e.g., specific order for imported goods passed by CESTAT, past precedent regarding classification valuation etc. EXPORTS Computerized processing of Shipping Bills under the Indian Customs EDI (Electronic Data Interchange) System (ICES 1.5) 2. Under ICES 1.5, the computerized processing of Shipping Bills would be handled in respect of the following categories of Shipping Bills: 1. Duty Free white Shipping Bills 2. Dutiable Shipping Bills (Cess) 3. Drawback Shipping Bills 4. DEEC Shipping Bills 5. EPCG Shipping Bills 6. DFIA Shipping Bills 7. 100 %EOU Shipping Bills 8. Jobbing Shipping Bills 9. Other Exim Scheme Shipping Bills 10. NFEI Shipping Bills 11. Reward Schemes PROCEDURE 3. The procedure to be followed in respect of filing of Shipping Bills under the Indian Customs EDI System 1.5 at OKHA Port shall be as follows: - Und ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ntained in the ICES 1.5 on the basis of details made available by the RBI. The exporters may note that it would not be possible for the local customs officials to add the details of the AD code unless the information is available from RBI. In case the details are not available, the matter may be brought to the notice of the ICEGATE team. Members of the trade may please note that ICEGATE provides 24X7 Helpdesk facility for trade to report problems related to electronic filing. The ICEGATE helpdesk can be contacted on e-mail address [email protected] and the replies to the queries shall be sent through e-mails. The Helpdesk can also be contacted on following telephone numbers: 011-23370133 and 011-23379020. 3.5 Registration of bank account for credit of Drawback amount:- For exports under claim of drawback, the exporter is required to open bank account with any Core Banking System branch of any bank in the country. Before filing of Shipping Bill under ICES 1.5, the exporter should approach the designated customs officer to register the details of such bank account in the ICES 1.5. Annexure E (Export) 3.6 Exchange Rates of un-notified currencies: The ICES 1.5 m ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... y of the DGFT Exim Licenses or Advance application, such license/advance application should be first registered in the ICES and License No. or the Registration No. or advance application should be indicated against each item of goods in the Shipping Bill. However, EDI messages between Customs and DGFT for a number of license types have been enabled. No separate registration shall be required for those licenses which are received from the DGFT online. 3.13 Self Sealed Container cargo: Exporters, who are allowed self-sealing of containers, should get themselves registered in the ICES 1.5 before the goods are registered for exports. 3.14 Registration of bank account for credit of Service Tax Refund amount: For exports under the claim of Service Tax Refund, the exporter is required to open bank account with any Core Banking System branch of any bank in the country. Before filing of Shipping Bill under ICES 1.5, the exporter should approach the designated customs officer to register the details of such bank account in the ICES 1.5. Annexure G (Export) 4. DATA ENTRY FOR SHIPPING BILLS 4.1 Shipping Bills can be filed through the service center located in Customs House, ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Bill No. shall be used for bringing the export goods to the Port. 4.6 It may be noted that since the document numbers are to be assigned by the Central Server at a national level, all document numbers, e.g., for Shipping Bills, EGMs, challans, would not be in a continuous series for each location. 4.7 The Declarations would be accepted at the Service Centre from 10.30.hrs to 16.30hrs. Declarations received up to 16.00hrs will be entered in the computer system on the same day. 4.8 Those Exporters or Customs Broker who intend to use Remote EDI System(RES) to file from their offices should download necessary software from website www.ices.nic.in which is available free of cost and register themselves with the ICEGATE. They have also been facilitated by providing submission of customs documents under digital signature. For this purpose they should one time register their details with ICEGATE. Detailed procedure for registration can be seen in New Registration Module from the website www.icegate.gov,in. To operationalize the facility to use Digital Signature Certificate for filing the aforementioned Customs process documents, the following process would be followed: (i) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Customs Brokers will be responsible for the delay in shipment of goods and any damage, deterioration or pilferage, without prejudice to any other action that may be taken. 7 PROCESSING OF SHIPPING BILLS 7.1 The S/B would be processed by the system on the basis of the declaration made by the exporter. Till the introduction of Export RMS, The following kinds of S/B shall require clearance of the Assistant Commissioner/Deputy Commissioner (AC/DC Exports): - i. Duty free S/B for FOB value above ₹ 10 lakh ii. Free Trade Sample S/B for FOB value above ₹ 25,000 iii. Drawback S/B where the drawback exceeds Rs. one lakh 7.2 The following categories of Shipping Bills shall be processed by the Appraiser/Supdt. (Export Assessment) first and then by the Asstt./Deputy Commissioner: i. DEEC ii. DFIA iii. EOU iv. EPCG v. Any other Exim Scheme if so required 7.3 Apart from verifying the value and other particulars for assessment, the AO/Supdt .and AC/DC may call for the samples for confirming the declared value or for checking classification under the Drawback Schedule / DEEC / DFIA / EOU, etc. He may also give special instruction for examination o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ew option in the SB header. Instructions will be given in the RMS tools interdicting the bill as per the perceived risk in each Shipping bill based on the declarations made in the bill. Officers assessing the SB shall carefully read each instruction and arrive at a decision to tackle the risk. These RMS instructions form an assist and are intended to guide the officers in assessment. All such instructions are displayed as RMS instructions in ICES. Officers are expected to study all the instructions on the screen carefully and assess the SB in compliance of the RMS instructions. Officers shall enter the reasons in the Departmental Comments if any of the RMS instructions are not followed. The officer need not limit his scrutiny to the strict confines of RMS instructions. The officer has the freedom to go beyond the instructions and scrutinize other sensitive aspects of the SB which are not referred to in RMS instructions. Whenever the Officer assessing the SB feels that any specific RMS instruction is not in tune with the declaration in the SB, he/she should enter a detailed comment in the departmental comments and proceed to take decision as per law. The Risk Management System will ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... . If the SB is interdicted for examination, the package numbers to be examined will also be displayed. (v) Examination: The examination of all RMS interdicted bills shall be carried out as per the instructions communicated by the RMS and the assessing officer‟s examination instructions. Certain SBs may be directly routed by the RMS for examination without any assessment by officers. In such cases, the RMS instructions for examination should be treated as examination orders. The officers shall bear in mind all existing standing orders and circulars issued by the department, while performing their work. The examining officers shall ensure that the goods under examination tally with the declared description, including critical parameters like brand, model, make, number, specification, grade, purity, configuration, capacity, denier etc., which may have a direct bearing on valuation, benefits under Export Promotion schemes and classification etc. The examination of the goods and Let Export Order (LEO) shall be completed by the officers, only after ensuring that the compulsory compliance requirements (CCRs) mentioned in the RMS instructions are duly complied with. Whenever ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... sons for his/her view in the EDI. (v) Export General Manifest (EGM): After issue of LEO, the next major event in the processing of a SB is the filing of EGM. There will not be any change in the procedure for filing of EGM. In the second phase, the RMS will also process the SB data after EGM is filed electronically and provide output to ICES for selection of SBs for Drawback scrutiny and PCA. Detailed instructions in this regard will be issued during the implementation of second phase of Export RMS. (vii) Data Quality: The Assessing/Examining officers are also required to focus on the data quality‟ of the SB declarations. The assessing officer should check the description of the item, besides the correctness of classification, valuation, claim of benefits under export promotion schemes, if any, and also ensure compliance with mandatory requirements prescribed under Foreign Trade Policy and/or allied enactments. They are required to check all critical aspects of description like brand, model, make, number, specification, grade, purity, configuration, capacity, denier etc. which may have a direct bearing on valuation, classification or claim of benefits under e ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ctor and present the checklist with the endorsement of Custodian of arrival of containers on the declaration, along with all the original documents such as Invoice, Packing List, ARE-1 (AR-4), etc. He will also present additional particulars in the form at Annexure C (Export). 8.2 The Officer will verify the quantity of the goods actually received against that entered in the system. He will enter Annexure C particulars in the system. The system would identify the Examining Officer (if more than one are available) who would be carrying out physical examination of goods. The system would also indicate the packages (the quantity and the serial numbers) to be subjected to examination. The Officer would write this information (Name of examination officer and package Srl. Nos to be examined) on the checklist and hand it over to the exporter. He would hand over the original documents to the Examining Officer. No examination orders shall be given unless the goods have been physically received in the Export Shed. It may, however, be clarified that Customs Officers have the discretion of examining any or all the packages/goods. 8.3 The Examining Officer may inspect and/or examine t ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... -examine the container in which case he will obtain the approval of AC/DC Export, before such re-examination. The AC / DC Export shall permit such re-examination for reasons to be recorded in writing. 9.4 Once the Appraiser/ Superintendent is satisfied that the goods are permissible for export in all respects, he will proceed to allow Let Export in the system for the shipments and inform the exporter. 9.5 This procedure will apply to containers stuffed in factories and self-sealed by the manufacturer-exporter. In respect of containers sealed in the factory after examination by the Customs / C. Excise officers, there will normally be no further examination at the ICD. 10. GENERATION OF SHIPPING BILLS 10.1 As soon as the Shed Appraiser/ Superintendent gives Let Export order, the system would print 6 copies of the Shipping Bills in case of Free and scheme Shipping Bills. All copies of the Shipping Bill would be duly signed by the Appraiser / Shed Superintendent. The examination report would be signed by the Appraiser / Shed Superintendent, Examination Officer as well as exporter / representative of the Customs Broker (Name and ID Card number of the representative of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tory/agency can access the test memo details online and when the test or analysis has been carried out, the results or findings shall be recorded online. Customs can access the results and take the appropriate action regarding the concerned consignment without waiting for the physical reports of the Laboratory. Please refer the CBEC Circular NO.03/2016 dated 03/02/2016 regarding extension of Indian Customs Single Window Project to other locations and Government. 13 QUERIES 13.1 In case of any doubt, the exporter, during examination, can clarify doubts. However, in case where the need arises for a detailed answer from the exporter, a query can be raised in the system by the Appraiser/Supdt., which needs to be approved by concerned AC/DC(Exports). The S/B will remain pending and cannot be printed till the exporter replies to the query to the satisfaction of the Assistant Commissioner/Deputy Commissioner. The reply to query if any can be submitted through ICEGATE or through Service Centre. 14 AMENDMENTS 14.1 Corrections/amendments in the checklist can be made at the Service Centre provided the system has not generated the S/B number. Where corrections are required to ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ary for the purpose. The misprint copy shall be cancelled before such permission is granted. 19. EXPORT OF GOODS UNDER CESS 19.1 For export items, which are subject to export cess, the cess shall be applied by the System on the basis of the corresponding 8 digit Heading Schedule maintained in the system. A printed challan generated by the system would be handed over to the exporter. The cess amount indicated should be deposited with the designated bank. 20. EXPORT OF GOODS UNDER CLAIM FOR DRAWBACK 20.1 The scheme of computerized processing of Drawback claims under the Indian Customs EDI System-Exports will be applicable for all exports through OKHA Port. 20.2 The exporters who intend to export the goods through OKHA Port under claim for Drawback are advised to open their account with the bank as stated in Para 3.5 above. This is required to be done to enable direct credit of the Drawback amount to the exporter's account, as no cheques would be issued for payment of drawback. The exporters are required to indicate their account number opened with the Bank. It would not be possible to accept any shipment for export under claim for Drawback in case the account n ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r and where the account of the exporter is in any other CBS branch of any bank, the designated bank would transfer the amount to the respective CBS branch who would credit the amount to exporter s account. The exporters may make arrangement with their banks for periodical statement of credits on account of drawback. a) An exporter desirous to have his drawback credited in any core banking branch of the bank authorized for drawback payment at that EDI location or any other bank other than the authorized bank (in any core banking enabled branch which is also RTGS and NEFT enabled), the exporter will be required to declare to the Customs authorities the Indian Financial Service Code (IFSC) of the bank branch where he operates his bank account, in addition to the core banking enabled account number, bank name and address in the prescribed format (As per the Annexure F to this Public Notice). The IFS Code No. can be obtained by the exporter from his bank branch. b) At the time of registration of the bank account with the Customs authorities the exporter will be required to produce a certificate from the bank branch, where he operates his bank account, certifying the correctness ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the said declared Drawback TI of AIR Schedule. This processing is subject to same conditions as applicable to AIR drawback wherein there is claim for only Customs component. Suitable change in EDI is being implemented by DG (Systems). (iii) After goods are exported, the exporter may apply to the relevant Central Excise office for fixation of brand rate under rule 7. In case of a timely filed complete application for fixation of brand rate under rule 7, subsequent drawback payments may arise against such shipping bill on account of provisional brand rate letter issued by Central Excise in terms of Para 5A-5B of Instruction No.603/01/2011-DBK dated 11.10.2013 and/or the final brand rate letter and here the above said provisional drawback amount already paid shall also be taken into account. iv) However, in case of a timely filed complete application for fixation of brand rate under rule 7, if the brand rate request is denied after verification, the rejection letter issued by Central Excise and endorsed to the Customs formation should carry the information about the details of the eligibility for the rate and cap specified in A‟ column of AIR Schedule in terms of all the ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l Advance Authorization in discharge of export obligations in terms of Notification No. 45/2016-Customs dated 13th August, 2016. These notifications may be downloaded from cbec.gov.in. ii). For the alternative AIRs relevant tariff item has to be suffixed with suffix C‟ or suffix D‟ for the situation when Cenvat facility has not been availed or when Cenvat facility has been availed, respectively, instead of the usual suffix A‟ or suffix B‟. In the option to claim Brand Rate of duty drawback in terms of rule 7 of the Drawback Rules 1995 with the Special Advance Authorization, the procedure in Annexure 1 with Circular No. 29/2015-Cus dated 16.11.2015 has relevance. However, the exporter shall have to declare the figure 9807‟ as identifier (in the shipping bill under the Drawback details) followed by the tariff item number of the goods as shown in column (1) of the Schedule and followed by the character D‟. Based on this, the shipping bill shall be processed for payment of provisional drawback amount equivalent to the Customs portion of these alternative AIRs. iii). The above mentioned DGFT and Customs notifications are effective from 1st ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... DGFT to Customs through an Electronic Message Exchange System is operational at this port in respect of DES /EPCG licenses issued on or after 30th September 2008. As per the procedure prescribed by DGFT, exporters apply for Advance licenses under Duty Exemption Scheme (DES) and licenses under Export Promotion Capital Goods Scheme (EPCG) to DGFT. As per the Handbook of Procedures Vol I, exports under DES can be started immediately on generation of file no. which is generated by DGFT on submission of application for licenses under DES. Accordingly DGFT would transmit the messages relating to File Numbers so generated by them to Customs so as to enable Customs to permit exports under DES. As, the exports under EPCG can be started only after issuance of license; the DGFT would transmit the License messages immediately on issuance of licenses under DES and EPCG scheme. The licenses under above mentioned schemes issued by DGFT would be received online by Customs. Such licenses would be subjected to the prescribed online validation checks at ICEGATE and thereafter, the same would be available for use by the exporters at the port of registration for imports. Details of such licenses would ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... eptember 2008, would continue to be followed. 22.6 In case of EPCG/DES (except those issued under Scheme Code 17) issued on or after 30th September 2008 there is no need of any registration at this port. However, in case of EPCG/DES issued prior to 30th September 2008 and DES issued Scheme Code 17, the exporters intending to file Shipping Bills under the aforesaid schemes including those under the claim for Drawback should first get their EPCG/ DES (issued upto19th June 2014 by the DGFT) registered with this port, which would be done by the designated officer. The original EPCG/DES would need to be produced before designated officer for data entry. A print out of the relevant particulars (Checklist) entered will be given to the Exporter/Customs Broker. The EPCG/ DES would need to be presented to the Appraiser/ Supt, who would verify the particulars entered in the computer with the original EPCG/DES and register verify the same in the EDI system. The Registration No. of the EPCG/DES would be furnished to the Exporter/Customs Broker, which would need to be mentioned on the declaration forms ( Annexure D ) at this port for export of goods. It would not be necessary thereafter for ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of containers is expected to enter the stuffing report on same day. 25. Rebate of State Levies on Textile garments Scheme for implementation of Rebate of State Levies on textile garments (ROSL) notified vide Notification Nos. 12020/03/2016-IT dated 12.8.2016 and 31.8.2016 by the Ministry of Textiles for all Exporters/ Customs brokers/ members of Trade is invited to.Further, the Central Government (Ministry of Textiles) has issued Notification No. 12020/03/2016-IT dated 13.8.2016 notifying the rates of rebate in Schedule I and Schedule II. Additionally, CBEC has issued Board Circular 043/2016-Cus dt.31.08.2016 which provides the guideline framework for implementation of this scheme. ROSL Scheme: In the ROSL scheme, the Central Govt. provides rebate of State levies comprising of State VAT/CST on inputs including packaging, fuel, duty on electricity generation and duties and charges on purchase of grid power, as accumulated through the stages of production from yarn to finished garments. There is no need for separate application or supporting documents except for making a specific choice in the Shipping bill. The rebate amount would be credited into the Exporter s A ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ly in the system. 1. The ROSL Amount is printed at the Shipping bill level as well as at the item level for the items where option has been exercised by giving a scheme code. 2. The option and total ROSL amount thus claimed is reflected in the SB Enquiry available on the ICEGATE website. 3 Declaration-cum-eligibility as detailed below is printed on the checklist. I declare that, I have not claimed or shall not claim credit/ rebate/ refund/ reimbursement of these specific State Levies under any other mechanism and I am eligible for the rate and rebate claimed for. Further, declare that an Internal Complaints Committee (ICC), where applicable, in pursuance of the Sexual Harassment of Women at Workplace (Prevention, Prohibition and Redressal) Act, 2013 has been constituted. RES vendors may ensure that their RES versions are compliant to changes in (1) (3) as stated above. SB Message format has also been revised accordingly. ROSL Disbursal: ROSL would be disbursed as per procedure detailed in Para 8 of the above referred Board Circular. For speedy disbursal, Exporters may ensure that the Account No. already registered for drawback disbursal is live and valid, as ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... after1stJuly,2014. e. Such certificates shall be filed by the exporter AD wise at each port. The relevant date for filing certificates shall be calculated from the date of let export order (LEO) which is the date when the export goods are permitted to be exported. An endorsement on the exporter s copy of S/Bill would be made specifying the due date for realization of export proceeds. f. The system shall indicate list of the shipping bills under drawback where the BRC/negative statement has not been furnished by the exporter within the prescribed date. The Assistant Commissioner / Deputy Commissioner (Export) may peruse such lists either for the entire Customs port or for an individual exporter by entering the IE code of the exporter and accordingly initiate action to recover drawback. g. The BRC entry module gives three options for entering the details of foreign exchange realization. h. If the exporter furnishes the BRCs as a proof of foreign exchange realization, the officer will choose option (1) and enter the specific Shipping Bill numbers and dates. Such Shipping Bills will be deleted by the system from the list of shipping bills pending for realization of export p ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ng enabled banking account of the exporter, in any branch/bank anywhere in the country (through the NEFT/RTGS). For this purpose, the exporters are required to register with Customs, the Indian Financial Service Code (IFSC) of the bank branch in which exporter wishes to receive the STR amount, the core banking enabled account number, bank name and address, using Annexure-A‟ enclosed with Board s circular. The procedure for registration of bank account is the same as existing procedure for registration of bank account for receiving drawback amount. The Customs officer having CLK‟ role with enter these details in ICES 1.5 and generates a checklist. Exporter/ his authorized representative will check the checklist and confirm its correctness. Once the details are found correct, the same shall be saved in system. (For this purpose additional officers may be mapped to CLK role if required.) Refer Annexure G (Export). Exporters who have their bank account numbers registered for drawback purpose need not register their bank accounts again. The existing account itself shall be used for crediting S.T Refund also. It may be added that there is no option of having separate ac ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d through ICES 1.5 shall be claimed by exporter by declaring Y in relevant field at the time of filing of shipping bill and declaring STR serial no. (Heading/ sub-heading number as per STR schedule to be notified shortly. b. Shipping Bill with only STR amount will move directly in scroll in queue after EGM is filed. However, drawback shipping Bill having STR also will continue to move to DBK- Superintendent screen and DBK- AC screen (in case of DBK is more than ₹ 1 Lakh). c. In the final scroll, a single amount indicating DBK and STR amount shall be shown against Shipping Bills. However, print copy of Scroll shall contain a consolidated break up indicating Drawback amount and ST refund amount. d. Exporters can check status of STR through ICEGATE as well as touch screen application. e. MIS has been suitably modified to indicate drawback and STR amount separately for Reporting and accounting purpose. 29.4 Claim for availment of Chapter 3 benefits: Exporters intending to claim chapter 3 benefits are required to declare Y in the item segment of Reward claimed (Table 28(14)) without which their Shipping Bill will not be transmitted to DGFT for availing such ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
