Manufacture - the dia-meter of the pipes are different and the ...

Swaging, welding pipes to form poles, and capping is classified as manufacturing under Central Excise rules.

June 7, 2017

Case Laws Central Excise AT

Manufacture - the dia-meter of the pipes are different and the same has been joined by the process of swaging. Moreover, the pipes were welded with the base plate to make it pole and on the top on the pole a cap is fixed - to be held as manufacturing activity - AT

View Source

← Previous Next →

Manufacture - the dia-meter of the pipes are different and the ...

Swaging, welding pipes to form poles, and capping is classified as manufacturing under Central Excise rules.

June 7, 2017

Case Laws Central Excise AT

You may also like:

Manufacture - Steel tubular poles joining of duty paid MS pipes of different diameters by welding and swaging - appellant's activity would amount to manufacture - AT

Entitlement to deduction u/s 80IC - process of cutting of stainless steel pipes of larger size with electric cutter and including painting and welding of pipes - ...

Supply of caps along with tubes - If in the present case, the caps are not manufactured in the factory of the appellant but are being supplied by the customers of the...

Excisability - the pipe is manufactured which is movable, hence marketable and subsequent to the manufacture, it is taken to the site where the pipe has to be laid down...

Manufacture - Excise duty liability on Fabrication of pipes - prima facie the appellant have manufactured the pipes in question. - AT

Process amounting to manufacture - Change in Tariff Heading - buying tubes (stainless steel pipes) and then undertaking certain processes thereon, such as, upsetting,...

Companies (Central Government's) General Rules and Forms (Fifth Amendment) Rules, 2012 - (Form 23AC & 23ACA) - Notification

After the processing pipe/tube a distinct product comes into being which is known in the commercial parlance as steel tubular pole which has character and was distinct...

Manufacture of "pipes" and "pipe fittings" - benefit of exemption is admissible only to "pipes" and not to "pipe fittings"

Transitional credit - revision of the Form TRAN-1 and Form TRAN-2 - The interest of justice would be served if we allow the petitioner to correct Form TRAN-1 in Writ...

Galvanized iron pipe is a different commercial commodity than a iron pipe, therefore the activity of galvanization in our considered opinion amounts to manufacture -...

Manufacture - O Ring & U Cap seals which were purchased by the appellant from various manufacturers and packeting the same as spares would not amount to manufacture by...

Manufacture - whether the activity by the applicant of bending, assembly and inspection of end formed tubes amount to manufacturing within the meaning of the Central...

Classification - one unit of cutter suction dredger with suction/discharge pipe - the question of classifying these self-floating pipes under Chapter No 4009 4200 would...

Central Government notifies special procedure by a registered person engaged in manufacturing of the goods - Notification

Quick Updates: