Gents Leather Shoes - Standards of Input Output Norms (SION) - G. Leather Products

1 [G14 Gents Leather Shoes 1 Pair 1 a) Synthetic lining 1.75 sq ft b) Full insole socks (Synthetic) OR 0.5 sq ft Full insole socks partly made of leather and partly of synthetic with or without shank Net + 1% wastage 1 c) Adhesives (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 05.00 gms e) Shoe finishes (Spray) 10.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 25 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs OR 0.009 sq mtr h) i) Counter/Stiffner made of leather/leather board. Net + 1% wastage ii) Toe Puff/caps made out of Thermo Plastic Sheets or Foam. Net +1 % wastage 1 i) Re-inforcement tape (width 1.5 cms) 0.50 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.011 kg m) Unit sole with or without heel OR 1 Pair 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/ Synthetic Rubber SBR(1502/1712) 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators OR 28 gms m) PVC Moulding Powder/ Granules in case of PVC Sole OR 1.035 Kg m) TPR Granules (in case of TPR Sole) OR 1.035 Kg m) Styrene Butadine Styrene Oil bound Co-polymer 0.803 kg 1 n) Heel (if not attached with unit sole) 1 Pair o) Shoe-Lace 1 Pair p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As per note 2 Below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to net 7 Steel/ Carbon Toe Cap Net to net 8 Decoration items Reflectors 0.052 sq.mtr 9 Webbing Tape 1.5 mtr 10 Design Components 1 Set 11 Wool Lining 0.285 sq.mtr 12 Welt Net to net 13 Midsole Net to net 14 Sole Welt 1.4 mtr 15 Unit Box 1 set 16 Tissue Paper 2 nos 17 Hang Tag Net to net 18 Conduction Thread 15 mtr 19 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 4.68 sq.ft If Synthetic lining not asked for 4.13 sq.ft full insole socks synthetic not asked for 2.75 sq.ft Synthetic lining and full insole socks synthetic are asked for 2.20 sq.ft. Note: 1. Antioxidant shall be restricted to 2% of weight of Natural/ Synthetic Rubber. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. Import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 4 High Speed Diesel (HSD) is also allowed for import @ 1.15 litre per pair of Gents Leather Shoes [Full shoes without leather lining] and @ 1.295 litre per pair of Gents Leather Shoes [Full shoes with leather lining] subject to actual user condition. These norms for fuel are applicable only to those units having facilities for captive power generation using HSD as fuel. Note: 5. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 19 above will not be allowed. Note: 6. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.12 sqm.tr Waterproof tape 2.0 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr ] ***************** NOTES:- 1. Substituted vide Public Notice No. 30/2023 dated 31-08-2023 before it was read as, G14 Gents Leather Shoes 1 Pair 1 a) Synthetic lining 1.75 sq ft b) Full insole socks (Synthetic) OR 0.5 sq ft Full insole socks partly made of leather and partly of synthetic with or without shank Net to Net. 1 c) Adhesives (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 05.00 gms e) Shoe finishes (Spray) 10.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 25 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs OR 0.009 sq mtr h) i) Counter/Stiffner made of leather/leather board. Net to Net. ii) Toe Puff/caps made out of Thermo Plastic Sheets or Foam. Net to Net. 1 i) Re-inforcement tape (width 1.5 cms) 0.50 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.011 kg m) Unit sole with or without heel OR 1 Pair Per Kg. of P.U. Sole 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms Per Kg. of Rubber Sole m) (i) Natural/ Synthetic Rubber SBR(1502/1712) 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators OR 28 gms Per Kg. of PVC Sole m) PVC Moulding Powder/ Granules in case of PVC Sole OR 1.035 Kg Per Kg. of TPR Sole m) TPR Granules (in case of TPR Sole) OR 1.035 Kg m) Styrene Butadine Styrene Oil bound Co-polymer 0.803 kg 1 n) Heel (if not attached with unit sole) 1 Pair o) Shoe-Lace 1 Pair p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards 1 No per 7500 Pairs b) Binding Guage 1 No per 10000 Pairs c) Industrial sewing machine needles/ hammer needle 40 Pcs per 1000 Pairs d) Bell/ skiving knives 1 No per 2250 Pairs e) Band knives for splitting M/c. 1 No per 2250 Pairs f) Grinding wheels 2 Nos per 1000 Pairs g) Feed Rollers 1 No per 1000 Pairs h) Set of cutting dies of various designs. 1 No Per 1000 Pairs i) Silver marking pencils/ pens/ refills 1 No Per 1000 Pairs j) Abrasive paper/ emery paper/ belts/ cup shapes 1 Sq.mtr Per 150 Pairs k) Brushes of all types 2 Pcs Per 1000 Pairs l) Sea Sponge 2 Pcs Per 1000 Pairs m) Plastic shoe last 4 Pairs Per 1000 Pairs n) Heating elements 1 No Per 1000 Pairs o) Cutters and trimmers (all types) for footwear making 1 No Per 500 Pairs 1) For retanning 12 kg Note: 1. Antioxidant shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pairs is (i) 4.25 sq. ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft if item 1(a) is not asked for, (iii) 2.5 sq. ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) (b) is asked for. 3. Import of synthetic rubber shall not exceed 50% of the total rubber allowed. 4. Note: High Speed Diesel (HSD) is also a llowed for import @ 1.15 litre per pair of Gents Leather Shoes [Full shoes without leather lining] and @ 1.295 litre per pair of Gents Lea ther Shoes [Full shoes with lea ther lining] subject to actual user condition. These norms for fuel are applicable only to those units having facilities for captive power generation using HSD as fuel.