Polyester (PET) chips (High pressure moulding Grade/bottle grade) - Standards of Input Output Norms (SION) - H. Plastic Products

H206 Polyester (PET) chips (High pressure moulding Grade/bottle grade) 1 MT 1 Purified Terephthalic Acid (PTA)/ Para-phthalic Acid 0.8480 MT 2 Ethylene Glycol/ Monoethylene Glycol (MEG) 0.3350 MT 3 Isophthalic Acid 0.0200 MT 4 Diethylene Glycol 0.0080 MT 5 Phosphoric Acid 0.00004 MT 1 [ 6 Antimony Trioxide OR Antimony Triacetate 0.00034 MT OR 0.00059 MT] 7 Cobalt Acetate 0.00018 MT 2 [Note 1: Import item at Serial Number 3 Isophthalic Acid can be replaced with Import item at Serial Number 1 Purified Terephthalic Acid upto a maximum of 0.045 MT. However, any increase / decrease in quantity of Isophthalic Acid will be adjusted from the quantity of Import item at Serial Number 1 Purified Terephthalic Acid and total quantity of Import item at Serial Number 1 Purified Terephthalic Acid and Import item at Serial Number 3 Isophthalic Acid will not exceed from the level of 0.8680 MT. Note 2: Import item at Serial Number 4 Diethylene Glycol may be allowed upto a maximum of 0.01 MT from the existing level of 0.008 MT for each increased/decreased quantity of 0.001MT Diethylene Glycol; the quantity of 0.00032 MT of Import item at Serial Number 1. Purified Terephthalic Acid and 0.0065 MT of Import item at Serial Number 2 Ethylene Glycol/Monoethylene Glycol (MEG) be decreased / increased from the quantities allowed in SION. ] --------------------------------------- Notes:- 1. Amended vide Public Notice No. 28/(RE-2010)/2009-2014, dated 11/02/2011, before it was read as:- 6 Antimony Trioxide 0.00034 MT 2. Inserted vide Public Notice No. 28/(RE-2010)/2009-2014, dated 11/02/2011,