SCH-03 - Third Schedule - Finance Act, 1995

THE THIRD SCHEDULE [See section 69 (b)] PART I In the First Schedule to the Customs Tariff Act,- (1) in Chapter 2, in heading No.02.09, for the entry in column (3), the following entry shall be substituted, namely:- PIG FAT, FREE OF LEAN MEAT, AND POULTRY FAT, NOT RENDERED OR OTHERWISE EXTRACTED, FRESH, CHILLED, FROZEN, SALTED, IN BRINE, DRIED OR SMOKED (2) in Chapter 3, (i) in sub-heading No.0301.91, for the entry in column (3), the following entry shall be substituted, namely:- --Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster) ; (ii) in sub-heading No.0302.11, for the entry in column (3), the following entry shall be substituted, namely:- --Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster) ; (iii) in sub-heading No.0302.12, for the entry in column (3), the following entry shall be substituted, namely:- --Pacific salmon (Oncorhynchus nerk , Oncorhynchus gorbuscha, oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho) ; (iv) in sub-heading No. 0303.10, for the entry in column (3), the following entry shall be substituted, namely:- --Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), excluding livers and roes ; (v) in sub-heading No.0303.21, for the entry in column (3), the following entry shall be substituted, namely:- --Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster) ; (vi) in sub-heading No.0305.41, for the entry in column (3), the following entry shall be substituted, namely: - --Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho) ; (3) in Chapter 4, (i) NOTES 2 and 3 shall be renumbered as NOTES 3 and 4 respectively and before NOTE 3 as so renumbered, the following NOTE shall be inserted, namely:- 2 For the purposes of heading No. 04.05: (a) The term butter means natural butter, whey butter or recombined butter (fresh, salted or rancid, including canned butter) derived exclusively from milk, with a milkfat content of 80% or more but not more than 95% by weight, a maximum milk solids-not-fat content of 2% by weight and a maximum water content of 16% by weight. Butter does not contain added emulsifiers, but may contain sodium chloride, food colours, neutralising salts and cultures of harmless lactic-acid-producing bacteria. (b) The expression dairy spreads means a spreadable emulsion of the water-in-oil type, containing milkfat as the only fat in the product, with a milkfat content of 39% or more but less than 80% by weight. ; (ii) after NOTE 4 as so renumbered, for the SUBHEADING NOTE, the following shall be substituted, namely: SUBHEADING NOTES 1. For the purposes of subheading No.0404.10, the expression modified whey means products consisting of whey constituents, i.e., whey from which all or part of the lactose, proteins or minerals have been removed, whey to which natural whey constituents have been added, and products obtained by mixing natural whey constituents. 2. For the purposes of subheading No.0405.10, the term butter does not include dehydrated butter or ghee (subheading No.0405.90). ; (4) in Chapter 5, in heading No.05.04, for the entry in column (3), the following entry shall be substituted, namely:- GUTS, BLADDERS AND STOMACHS OF ANIMALS (OTHER THAN FISH), WHOLE AND PIECES THEREOF, FRESH, CHILLED, FROZEN, SALTED, IN BRINE, DRIED OR SMOKED ; (5) in Chapter 7, (i) in NOTE 3, for clauses (c) and (d), the following clauses shall be substituted, namely: (c) flour, meal, powder, flakes, granules and pellets of potatoes (heading No. 11.05); ; (d) flour, meal and powder of the dried leguminous vegetables of heading No.07.13 (heading No.11.06). ; (ii) in heading No.07.12, sub-heading No.0712.10 and the entries relating thereto shall be omitted; (iii) in heading No. 07.14,- (a) for the entry in column (3), the following entry shall be substituted, namely:- MANIOC, ARROWROOT, SALEP, JERUSALEM ARTICHOKES, SWEET POTATOES AND SIMILAR ROOTS AND TUBERS WITH HIGH STARCH OR INULIN CONTENT, FRESH, CHILLED, FROZEN OR DRIED, WHETHER OR NOT SLICED OR IN THE FORM OF PELLETS, SAGO PITH ; (b) in subheading Nos. 0714.10, 0714.20 and 0714.90, for the entry in column (4), the entry 50% shall be substituted; (6) in Chapter 11, (i) in NOTE 2, in clause (A), the following shall be inserted at the end, namely: However, germ of cereals, whole, rolled, flaked or ground is always classified in heading No. 11.04. ; (ii) in heading No. 11.05, for the entry in column (3), the following entry shall be substituted, namely:- FLOUR, MEAL, POWDER, FLAKES, GRANULES AND PELLETS OF POTATOES ; (iii) in subheading No.1105.10, for the entry in column (3), the following entry shall be substituted, namely:-- -Flour, meal and powder ; (iv) in heading No. 11.06,- (a) for the entry in column (3), the following entry shall be substituted, namely: FLOUR, MEAL AND POWDER OF THE DRIED LEGUMINOUS VEGETABLES OF HEADING No.07.13, OF SAGO OR OF ROOTS OR TUBERS OF HEADING No.07.14 OR OF THE PRODUCTS OF CHAPTER 8 ; (b) in sub-heading No. 1106.10, for the entry in column (3), the following entry shall be substituted, namely: -Of the dried leguminous vegetables of heading No. 07.13 ; (c) in sub-heading No. 1106.20, for the entry in column (3), the following entry shall be substituted, namely:- -Of sago or of roots or tubers of heading No.07.14 ; (d) in sub-heading No.1106.30, for the entry in column (3), the following entry shall be substituted, namely: -Of the products of Chapter 8 ; (7) in Chapter 12, in heading No. 12.12, for the entry in column (3), the following entry shall be substituted, namely:- LOCUST BEANS, SEAWEEDS AND OTHER ALGAE, SUGAR BEET AND SUGAR CANE, FRESH, CHILLED, FROZEN OR DRIED, WHETHER OR NOT GROUND; FRUIT STONES AND KERNELS AND OTHER VEGETABLE PRODUCTS (INCLUDING UNROASTED CHICORY ROOTS OF THE VARIETY CICHORIUMINTYBUSSATIVUM OF A KIND USED PRIMARILY FOR HUMAN CONSUMPTION, NOT ELSEWHERE SPECIFIED OR INCLUDED ; (8) in Chapter 13, (i) in NOTE 1, (a) for clause (d), the following clause shall be substituted, namely:- (d) Vegetable saps or extracts constituting alcoholic beverages (Chapter 22) ; (b) for clause (h), the following clause shall be substituted, namely: (h) Essential oils, concretes, absolutes, resinoids, extracted oleoresins, aqueous distillates or aqueous solutions of essential oils or preparations based on odoriferous substances of a kind used for the manufacture of beverages (Chapter 33); or ; (ii) in heading 13.01, for entry in column (3), the following entry shall be substituted, namely:- LAC, NATURAL GUMS, RESINS, GUM-RESINS AND. OLEORESINS (FOR EXAMPLE, BALSAMS) ; (9) in Chapter 15, (i) in NOTE 1, in clause (e) the words in an isolates state shall be omitted; (ii) in heading No. 15.01, for the entry in column (3), the following entry shall be substituted, namely: PIG FAT (INCLUDING LARD) AND POULTRY FAT, OTHER THAN THAT OF HEADING No. 02.09 OR 15.03 ; (iii) in heading No.15.02, for entry in column (3), the following entry shall be substituted, namely: FATS OF BOVINE ANIMALS, SHEEP OR GOATS, OTHER THAN THOSE OF HEADING No. 15.03 ; (iv) heading No. 15.19, sub-heading Nos. 1519.11, 1519.12, 1519.13, 1519.19, and 1519.20 and the entries relating thereto shall be omitted; (10) in Chapter 16, in NOTE 1, for the words and figures Chapter 2 or 3 , the words and figures Chapter 2 or 3 or heading No. 05.04 shall be substituted; (11) in Chapter 19,- (i) for NOTE 3, the following NOTE shall be substituted, namely:- 3. Heading No.19.04 does not cover preparations containing more than 6% by weight of cocoa calculated on a totally defatted basis or coated with chocolate or other food preparations containing cocoa of heading No.18.06 (heading No.18.06). ; (ii) in heading No.19.01, for the entry in column (3); the following entry shall be substituted, namely:- MALT EXTRACT; FOOD PREPARATIONS OF FLOUR, MEAL, STARCH OR MALT EXTRACT, NOT CONTAINING COCOA OR CONTAINING LESS THAN 40% BY WEIGHT OF COCOA CALCULATED ON A TOTALLY DEFATTED BASIS, NOT ELSEWHERE SPECIFIED OR INCLUDED; FOOD PREPARATIONS AND GOODS OF HEADINGS NOS. 04.01 TO 04.04, NOT CONTAINING COCOA OR CONTAINING LESS THAN 5% BY WEIGHT OF COCOA CALCULATED ON A TOTALLY DEFATTED BASIS, NOT ELSEWHERE SPECIFIED OR INCLUDED ; (iii) in heading No. 19.04, for the entry in column (3), the following entry shall be substituted, namely:- PREPARED FOODS OBTAINED BY THE SWELLING OR ROASTING OF CEREALS OR CEREAL PRODUCTS (FOR EXAMPLE, CORN FLAKES); CEREALS [OTHER THAN MAIZE (CORN) IN GRAIN FORM OR IN THE FORM OF FLAKES OR OTHER WORKED GRAINS (EXCEPT FLOUR AND MEAL), PRECOOKED, OR OTHERWISE PREPARED, NOT ELSEWHERE SPECIFIED OR INCLUDED ; (12) in Chapter 20,- (i) in heading No. 20.04, for the entry in column (3), the following entry shall be substituted, namely:- OTHER VEGETABLES PREPARED OR PRESERVED OTHERWISE THAN BY VINEGAR OR ACETIC ACID, FROZEN, OTHER THAN PRODUCTS OF HEADING No. 20.06 ; (ii) in heading No. 20.05- (a) for the entry in column (3), the following entry shall be substituted, namely:- OTHER VEGETABLES PREPARED OR PRESERVED OTHERWISE THAN BY VINEGAR OR ACETIC ACID, NOT FROZEN, OTHER THAN PRODUCTS OF HEADING No. 20.06 ; (b) sub-heading No. 2005.30 and the entries relating thereto shall be omitted; (iii) in heading No. 20.06, for the entry in column (3), the following entry shall be substituted, namely:- VEGETABLES, FRUIT, NUTS FRUIT PEEL AND OTHER PARTS OF PLANTS, PRESERVED BY SUGAR (DRAINED, GLACE OR CRYSTALLISED) ; (13) in Chapter 21,- (i) in NOTE 1, clause (f) shall be omitted and the existing clauses (g) and (h) shall be renumbered as clauses (f) and (g) respectively; (ii) in heading No. 21.06, in subheading No. 2106.90, for the entry in column (4), the entry 290% shall be substituted; (14) in Chapter 22, (i) in heading No. 22.06, in column (3), for the words BEVERAGES NOT ELSEWHERE , the words BEVERAGES, NOT ELSEWHERE shall be substituted; (ii) in heading No. 22.08- (a) for the entry in column (3), the following entry shall be substituted, namely: UNDENATURED ETHYL ALCOHOL OF AN ALCOHOLIC STRENGTH BY VOLUME OF LESS THAN 80% VOL.; SPIRITS, LIQUEURS AND OTHER SPIRITUOUS BEVERAGES ; (b) subheading No. 2208.10 and the entries relating thereto shall be omitted; (15) in Chapter 25,- (i) in NOTE 2, in clause (g), for the figures 38.23 , the figures 38.24 shall be substituted; (ii) in heading No. 25.30, subheading No. 2530.30 and the entries relating thereto shall be omitted; (16) in Chapter 26, (i) in NOTE 1, for clause (e), the following clause shall be substituted, namely: (e) Waste or scrap of precious metal or of metal clad with precious metal; other waste or scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal (heading No. 71.12); or (ii) in heading No. 26.02, for the entry in column (3), the following entry shall be substituted, namely: MANGANESE ORES AND CONCENTRATES, INCLUDING FERRUGINOUS MANGANESE ORES AND CONCENTRATES WITH A MANGANESE CONTENT OF 20% OR MORE, CALCULATED ON THE DRY WEIGHT ; (17) in Chapter 28, (i) in NOTE 1, for clause (d) the following clause shall be substituted, namely:- (d) The products mentioned in (a), (b) or (c) above with an added stabiliser (including an anti-caking agent) necessary for their preservation or transport; ; (ii) in Note 3,- (a) in clause (e), for the figures 38.23 , wherever they occur, the figures 38.24 shall be substituted; (b) for clause (g), the following clause shall be substituted, namely:- (g) The metals, whether or not pure, metal alloys or cermets, including sintered metal carbides (metal carbides sintered with a metal), of Section XV; or ; (iii) in heading No. 28.27, subheading No. 2827.37 and the entries relating thereto shall be omitted; (iv) in heading No. 28.35, subheading No. 2835.21 and the entries relating thereto shall be omitted; (v) in heading No. 28.36, subheading No. 2836.93 and the entries relating thereto shall be omitted; (18) in Chapter 29,- (i) in NOTE 1, for clause (f), the following clause shall be substituted, namely: (f) The products mentioned in (a), (b), (c), (d) or (e) above with an added stabiliser (including an anti-caking agent) necessary for their preservation or transport ; (ii) In NOTE 2,- (a) for clause (a), the following clause shall be substituted, namely:- (a) Goods of heading No. 15.04 or crude glycerol of heading No. 15.20 ; (b) in clause (ii), for the figures 38.23 , the figures 38.24 shall be substituted; (iii) in NOTE 5, (a) in clause (b), the words or glycerol shall be omitted; (b) in clause (d), the words and glycerol shall be omitted; (iv) in heading No. 29.05, subheading No. 2905.21 and the entries relating thereto shall be omitted; (v) in heading No. 29.33,--- (a) for the entry in column (3), the following entry shall be substituted, namely: HETEROCYCLIC COMPOUNDS WITH NITROGEN HETERO- ATOM(S) ONLY ; (b) after subheading No. 2933.40 and the entries relating thereto, in column (3), for the words and brackets -Compound containing a pyrimidine ring (whether or not hydrogenated) or piperazine ring in the structure; nucleic; ascids and their salts; , the following words and brackets shall be substituted, namely:- -Compounds containing a pyrimidine ring (whether or not hydrogenated) or piperazine ring in the structure: ; (vi) in heading No. 29.34, for the entry in column (3), the following entry shall be substituted, namely:- NUCLEIC ACIDS AND THEIR SALTS; OTHER HETEROCYCLIC COMPOUNDS ; (19) in Chapter 30,- (i) NOTES 2 and 3 shall be renumbered as NOTES 3 and 4 respectively and before NOTE 3 as so renumbered, the following NOTE shall be inserted, namely:- 2. For the purposes of heading No. 30.02, the expression modified immunological products applies only to monoclonal antibodies (MABS), antibody fragments, antibody conjugates and antibody fragment conjugates. ; (ii) in NOTE 3 as so renumbered, for the word, figure, brackets and letter Note 3(d) , the word, figure, brackets and letter Note 4(d) shall be substituted; (iii) in heading No. 30.02, for the entry in column (3), the following entry shall be substituted, namely:- HUMAN BLOOD; ANIMAL BLOOD PREPARED FOR THERAPEUTIC, PROPHYLACTIC OR DIAGNOSTIC USES; ANTISERA AND OTHER BLOOD FRACTIONS AND MODIFIED IMMUNOLOGICAL PRODUCTS, WHETHER OR NOT OBTAINED BY MEANS OF BIOTECHNOLOGICAL PROCESSES, VACCINES, TOXINS, CULTURES OF MICRO-ORGANISMS (EXCLUDING YEASTS) AND SIMILAR PRODUCTS ; (iv) in subheading No. 3002.10, for the entry in column (3), the following entry shall be substituted, namely:- -Antisera and other blood fractions and modified immunological products, whether or not obtained by means of biotechnological processes ; (v) in heading No. 30.06, for the entry in column (3), the following entry shall be substituted, namely:- PHARMACEUTICAL GOODS SPECIFIED IN NOTE 4 TO THIS CHAPTER ; (20) in Chapter 31, in NOTE 1, in clause (c), for the figures 38.23 , the figures 38.24 shall be substituted; (21) in Chapter 32, (i) in heading No. 32.01, subheading No. 3201.30 and the entries relating thereto shall be omitted; (ii) in heading No. 32.14, in subheading No. 3214.10, for the entry in column (3), the following entry shall be substituted, namely:- -Glaziers putty, grafting putty, resin cements, caulking compounds and other mastics; painters fillings ; (22) in Chapter 33,- (i) in NOTE 1, for clause (a), the following clause shall be substituted, namely: (a) Natural oleoresins or vegetable extracts of heading No. 13.01 or 13.02; ; (ii) NOTES 2 and 3 shall be renumbered as NOTES 3 and 4 respectively, and before NOTE 3 as so renumbered, the following NOTE shall be inserted, namely: 2. The expression odoriferous substances in heading No. 33.02 refers only to the substances of heading No. 33.01, to odoriferous constituents isolated from those substances or to synthetic aromatics ; (iii) in heading No. 33.01, in column (3), after the word RESINOIDS; the words EXTRACTED OLEORESIN; shall be inserted; (iv) in heading No. 33.02, (a) for the entry in column (3), the following entry shall be substituted, namely: MIXTURES OF ODORIFEROUS SUBSTANCES AND MIXTURES (INCLUDING ALCOHOLIC SOLUTIONS) WITH A BASIS OF ONE OR MORE OF THESE SUBSTANCES, OF A KIND USED AS RAW MATERIALS IN INDUSTRY; OTHER PREPARATIONS BASED ON ODORIFEROUS SUBSTANCES, OF A KIND USED FOR THE MANUFACTURE OF BEVERAGES ; (b) in subheading No. 3302.10, for the entry in column (4), the entry 290% shall be substituted; (23) in Chapter 34, in NOTE 5, in clause (a), for the figures 15.16, 15.19 or 34.02 , the figures 15.16, 34.02 or 38.23 shall be substituted; (24) in chapter 37,- (i) in NOTE 1, the word materials shall be omitted; (ii) for NOTE 2, the following NOTE shall be substituted, namely:-. 2. In this Chapter the word photographic relates to the process by which visible images are formed, directly or indirectly, by the action of light or other forms of radiation on photosensitive surfaces ; (iii) in heading No. 37.02,- (a) after subheading No. 3702.20, and the entries relating thereto, in column (3), for the words -Other film, without sprocket holes, of a width not exceeding 105mm: , the following words shall be substituted, namely: -Other film, without perforations, of a width not exceeding 105 mm: ; (b) after subheading No. 3702.39, and the entries relating thereto, in column (3), for the words Other film, without sprocket holes, of a width exceeding 105 mm: , the following words shall be substituted, namely:- -Other film, without perforations, of a width exceeding 105 mm : ; (25) in Chapter 38,- (i) In NOTE 1, after clause (c), the following clause shall be inserted, namely:- (d) Spent catalysts of a kind used for the extraction of base metals or for the manufacture of chemical compounds of base metals (heading No. 26.20), spent catalysts of a kind used principally for the recovery of precious metal (heading No. 71.12) or catalysts consisting of metals or metal alloys in the form of, for example, finely divided powder or woven gauze (Section XIV or XV). ; (ii) in NOTE 2, for the figures 38.23 , the figures 38.24 shall be substituted; (iii) in heading No. 38.06, in subheading No. 3806.20, for the entry in column (3), the following entry shall be substituted, namely:- -Salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adducts ; (iv) in heading No. 38.22, for the entry in column (3), the following entry shall be substituted, namely:- DIAGNOSTIC OR LABORATORY REAGENTS ON A BACKING AND PREPARED DIAGNOSTIC OR LABORATORY REAGENTS WHETHER OR NOT ON A BACKING, OTHER THAN THOSE OF HEADING NO. 30.02 OR 30.06 ; (26) in Chapter 39, (i) in NOTE 2,- (a) for clause (d), the following clause shall be substituted, namely:- (d) Solutions (other than collodions) consisting of any of the products specified in headings Nos. 39.01 to 39:13 in volatile organic solvents when the weight of the solvent exceeds 50% of the weight of the solution (heading No. 32.08); stamping foils of heading No. 32.12; ; (b) clauses (g) to (v) shall be renumbered as clauses (h) to (w) respectively and before clause (h) as so renumbered, the following clause shall be inserted, namely:- (g) Diagnostic or laboratory reagents on a backing of plastics (heading No. 38.22); ; (ii) for NOTE 4, the following NOTE shall be substituted, namely:- 4. The expression copolymers covers all polymers in which no single monomer unit contributes 95% or more by weight to the total polymer content. For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituent comonomer units of polymers falling in the same heading shall be taken together. If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration. ; (iii) for the Subheading note, the following Subheading Note shall be substituted, namely:- Within any one heading of this Chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions: (a) Where there is a subheading named Other in the same series: (1) The designation in a subheading of a polymer by the prefix poly (e.g., polyethylene and polymide-6, 6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95% or more by weight of the total polymer content. (2) The copolymers named in subheading Nos. 3901.30, 3903.20, 3903.30 and 3904.30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95% or more by weight of the total polymer content. (3) Chemically modified polymers are to be classified in the subheading named Other , provided that the chemically modified polymers are not more specifically covered by another subheading. (4) Polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheading under consideration are to be compared. (b) where there is no subheading named Other in the same series: (1) Polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared. (2) Chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer. Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions. ; (27) in Chapter 41, in heading No. 41.04, in subheading No. 4104.31, for the entry in column (3), the following entry shall be substituted, namely: --Full grains and full grain splits ; (28) in Chapter 42, for Note 2, the following Note shall be substituted, namely: 2. (A) In addition to the provisions of Note 1 above, heading No. 42.02 does not cover: (a) Bags made of shefing of plastics, whether or not printed, with handles, not designed for prolonged use (heading No. 39.23); (b) Articles of plaiting materials (heading No. 46.02). (B) Articles of heading Nos. 42.02 and 42.03 which have parts of precious metal or metal clad with precious metal, of natural or cultured pearls, of precious or semi-precious stones (natural, synthetic or reconstructed) remain classified in those headings even if such parts constitute more than minor fittings or minor ornamentation, provided that these parts do not give the articles their essential character. If, on the other hand, the parts give the articles their essential character, the articles are to be classified in Chapter 71. ; (29) in Chapter 43, (i) in Note 1, in clause (b), for the word hair , the words hair or wool shall be substituted; (ii) in Note 2, in clause (b), for the word hair , the words hair or wool shall be substituted; (30) in Chapter 44, (i) in Note 1, for clause (b), the following clause shall be substituted, namely:- (b) Bamboos or other materials of a woody nature of a kind used primarily for plaiting, in the rough, whether or not split, swan lengthwise or cut to length (heading No. 14.01); ; (ii) for Note 6, the following Note shall be substituted, namely: 6. Subject to Note 1 above and except where the context otherwise requires, any reference to wood in a heading of this Chapter applies also to bamboos and other materials of a woody nature. ; (iii) after Note 6, the following Subheading Note shall be inserted, namely:- SUBHEADING NOTE For the purposes of subheading Nos. 4403.41 to 4403.49, 4407.24.to 4407.29, 4408.31 to 4408.39 and 4412.13 to 4412.99, the expression tropical wood means one of the following types of wood: Abura, Acajou, d Afrique, Afrormosia, Ako, Alan, Andiroba, Aningre, Avodire, Azobe, Balau, Balsa, Bosse clair, Bosse fonce, Cativo, Cedro, Dabema, Dark Red Meranti, Dibetou, Doussie, Framire, Freijo, Fromager, Fuma, Geronggang, Ilomba, Imbuia, Ipe, Iroko, Jaboty, Jelutong, Jequitiba, Jongkong, Kapur, Kempas, Keruing, Kosipo, Kotibe, Koto, Light Red Meranti, Limba, Louro, Macaranduba, Mahogany, Makore, Mansonia, Mengkulang, meranti Bakau, Merawan, Merbau, Merpauh, Mersawa, Moabi, Niangon, Nyatoh, Obeche, okoume, Onzabili, Orey, Ovengkol, Ozigo, Padauk, Paldao, Palissandre de Guatemala, Palissandre de Para, Palissandre de Rio, Palissandre de Rose, Pau Marfim, Pulai, Punah, Ramin, Sapelli, Saqui-Saqui, Sepetir, Sipo, Sucupira, Suren, Teak, Tiama, Tola, Virola, White Lauan, White Meranti, White Seraya, Yellow Meranti. ; (iv) in heading No. 44.15, (a) for the entry in column (3), the following entry shall be substituted, namely:- PACKING CASES, BOXES, CRATES, DRUMS AND SIMILAR PACKINGS, OF WOOD; CABLE DRUMS OF WOOD; PALLETS, BOX PALLETS AND OTEHR LOAD BOARDS, OF WOOD; PALLET COLLARS OF WOOD ; (b) in subheading No. 4415.20, for the entry in column (3), the following entry shall be substituted, namely:- -Pallets, box pallets and other load boards; pallet collars ; (31) in Chapter 46, in Note 1, for the words and brackets strips of other vegetable material (for example, raffia, narrow leaves or strips cut from broad leaves) or bark, , the words and brackets strips of other vegetable material (for example, strips of bark, narrow leaves and raffia or other strips obtained from broad leaves), shall be substituted ; (32) in SECTION X, in the title, for the words WASTE AND SCRAP OF PAPER OR PAPERBOARD , the words and brackets RECOVRED (WASTE AND SCRAP) PAPER OR PAPERBOARD shall be substituted; (33) in Chapter 47,- (i) in the title, for the words Waste and Scrap of paper or Paperboard , the words and brackets Recovered (waste and scrap) paper or paperboard shall be substituted; (ii) in heading No. 47.06, for the entry in column (3), the following entry shall be substituted, namely:-- PULPS OF FIBRES DERIVED FROM RECOVERED (WASTE AND SCRAP) PAPER OR PAPERBOARD OR OF OTHER FIBROUS CELLULOSIC MATERIAL ; (iii) in heading No. 47.07,- (a) for the entry in column (3), the following entry shall be substituted, namely:- RECOVERED (WASTE AND SCRAP) PAPER OR PAPERBOARD : (b) in subheading No. 4707.10, for the entry in column (3), the following entry shall be substituted, namely:- -Unbleached Kraft paper or paperboard or corrugated paper or paperboard ; (c) in subheading No. 4707.20 in column (3), for the words Of other paper , the words Other paper shall be substituted; (d) in subheading No. 4707.30, in column (3), for the words Of Paper , the word Paper shall be substituted; (34) in Chapter 48,- (i) In Note 1, clauses (f) to (o) shall be renumbered as clauses (g) to (p) respectively and before clause (g) as so renumbered, the following clause shall be inserted, namely:- (f) Paper impregnated with diagnostic or laboratory reagents (heading No. 38.22); ; (ii) in Note 2, the words for example, by coating or impregnation , shall be omitted; (iii) for Note 3, the following note shall be substituted, namely: 3. In this Chapter the expression newsprint means uncoated paper of a kind used for the printing of newspapers, of which not less than 65% by weight of the total fibre content consists of wood fibres obtained by a mechanical or chemi- mechanical process, unsized or very lightly sized, having a surface roughness Parker Print Surf (1 MPa) on each side exceeding 2.5 micrometres (microns), weighing not less than 40 g/m and not more than 65g/m . ; (iv) in Note 4,- (a) the brackets and sign (*) , wherever they occur, shall be omitted; (b) the footnote shall be omitted; (c) in clauses (d) and (e), for the figures and letters 2.5 kPa/g/m the figure and letters 2.5 kPa./gm2 shall be substituted; (v) for Note 6, the following Note shall be substituted, namely: 6. Except where the terms of the headings otherwise require, paper, paperboard, cellulose wadding and webs of cellulose fibres answering to a description in two or more of the heading Nos 48.01 to 48.11 are to be classified under that one of such heading which occurs last in numerical order in this Schedule. ; (vi) existing Note 7 shall be renumbered as Note 7 (A) and after NOTE 7(A) as so renumbered, the following Note shall be inserted, namely: 7(B). Heading Nos. 48.03 and 48.09 apply only to paper, cellulose, wadding and webs of cellulose fibres: (a) in strips or rolls of a width exceeding 36 cm.; or (b) in rectangular (including square) sheets with one side exceeding 36 cm. and the other side exceeding 15 cm. in the unfolded state. ; (vii) in SUBHEADING NOTE 2, in clause (a), for the figures 38 , the figures and letters 3.7 kPa. m /g shall be substituted; (viii) in SUBHEADING NOTE 3, for the figures and letters 20 kgf , the figures and word 196 newtons shall be substituted; (ix) in SUBHEADING NOTE 4, for the figures 15 , the figures and letters 1.4 kPa. m /g shall be substituted; (x) in heading No. 48.03, for the entry in column (3), the following entry shall be substituted, namely:- TOILET OR FACIAL TISSUE STOCK, TOWEL OR NAPKIN STOCK AND SIMILAR PAPER OF A KIND USED FOR HOUSEHOLD OR SANITARY PURPOSES, CELLULOSE WADDING AND WEBS OF CELLULOSE FIBRES, WHETHER OR NOT CREPED, CRINKLED, EMBOSSED, PERFORATED, SURFACE- COLOURED, SURFACE DECORATED OR PRINTED, IN ROLLS OR SHEETS ; (xi) in heading No. 48.05, for the entry in column (3), the following entry shall be substituted, namely:- OTHER UNCOATED PAPER AND PAPERBOARD, IN ROLLS OR SHEETS, NOT FURTHER WORKED OR PROCESSED THAN AS SPECIFIED IN NOTE 2 TO THIS CHAPTER ; (xii) in heading No. 48.08, for the entry in column (3), the following entry shall be substituted, namely:- PAPER AND PAPERBOARD, CORRUGATED (WITH OR WITHOUT GLUED FLAT SURFACE SHEETS), CREPED, CRINKLED, EMBOSSED OR PERFORATED, IN ROLLS OR SHEETS, OTHER THAN PAPER OF THE KIND DESCRIBED IN HEADING No. 48.03 ; (xiii) in heading No. 48.09, for the entry in column (3), the following entry shall be substituted, namely:- CARBON PAPER, SELF-COPY PAPER AND OTHER COPYING OR TRANSFER PAPERS (INCLUDING COATED OR IMPREGNATED PAPER FOR DUPLICATOR STENCILS OR OFFSET PLATES), WHETHER OR NOT PRINTED, IN ROLLS OR SHEETS ; (xiv) in heading No. 48.11, for the entry in column (3), the following entry shall be substituted, namely:- PAPER, PAPERBOARD, CELLULOSE WADDING AND WEBS OF CELLULOSE FIBRES, COATED, IMPREGNATED, COVERED, SURFACE-COLOURED, SURFACE-DECORATED OR PRINTED, IN ROLLS OR SHEETS, OTHER THAN GOODS OF THE KIND DESCRIBED IN HEADING No. 48.03, 48.09 OR 48.10 ; (xv) in heading No. 48.18, for the entry in column (3), the following entry shall be substituted, namely:- TOILET PAPER AND SIMILAR PAPER, CELLULOSE WADDING OR WEBS OF CELLULOSE FIBRES, OF A KIND USED FOR HOUSEHOLD OR SANITARY PURPOSES, IN ROLLS OF A WIDTH NOT EXCEEDING 36 CM. OR CUT TO SIZE OR SHAPE; HANDKERCHIEFS, CLEANSING TISSUES, TOWELS, TABLECLOTHES, SERVIETTES, NAPKINS FOR BABIES, TAMPONS, BED SHEETS AND SIMILAR HOUSEHOLD, SANITARY OR HOSPITAL ARTICLES, ARTICLES OF APPAREL AND CLOTHING ACCESSORIES, OF PAPER PULP, PAPER, CELLULOSE WADDING OR WEBS OF CELLULOSE FIBRES ; (xvi) in heading No. 48.23, subheading No. 4823.30 and the entries relating thereto shall be omitted; (35) in SECTION XI, (i) in NOTE 1,- (a) for clause (e), the following clause shall be substituted, namely:- (e) Articles of heading No. 30.05 or 30.06 (for example, wadding, gauze, bandages and similar articles for medical, surgical, dental or veterinary purposes, sterile surgical suture materials); yarn used to clean between the teeth (dental floss), in individual retail packages, of heading No. 33.06; ; (b) in clause (s), the word or occurring at the end shall be omitted; (c) after clause (t) the following clauses shall be inserted, namely:- (u) Articles of Chapter 96 (for example, brushes, travel sets for sewing, slide fasteners and typewriter ribbons); or (v) Articles of Chapter 97. ; (ii) in NOTE 5, for clause (b), the following clause shall be substituted, namely:- (b) Dressed for use as sewing thread; and ; (iii) in NOTE 7, for clause (f), the following clause shall be substituted, namely:- (f) Knitted or crocheted to shape, whether presented as separate items or in the form of a number of items in the length. ; (iv) for NOTE 8, the following NOTE shall be substituted, namely:- 8. For the purposes of Chapters 50 to 60: (a) Chapter 50 to 55 and 60 and, except where the context otherwise requires, Chapters 56 to 59 do not apply to goods made up within the meaning of Note 7 above; and (b) Chapters 50 to 55 and 60 do not apply to goods of Chapters 56 to 59. ; (v) in NOTE 13, the following shall be inserted at the end, namely:- For the purposes of this Note, the expression textile garments means garments of heading Nos. 61.01 to 61.14 and heading Nos. 62.01 to 62.11. ; (vi) in SUBHEADING NOTE 2, in clause (B), for sub-clause (c), the following sub-clause shall be substituted, namely:- (c) in the case of embroidery of heading No. 58.10 and goods thereof, only the ground fabric shall be taken into account. However, embroidery without visible ground, and goods thereof, shall be classified with reference to the embroidering threads alone. ; (36) in Chapter 52, for SUBHEADING NOTE, the following SUBHEADING NOTE shall be substituted, namely:- For the purposes of subheading Nos. 5209.42 and 5211.42, the expression Denim means fabrics of yarns of different colours, of 3-thread or 4-thread twill, including broken twill, warp faced, the warp yarns of which are of one and the same colour and the weft yarns of which are unbleached, bleached, dyed grey or coloured a lighter shade of the colour of the warp yarns. ; (37) in Chapter 58, in heading No. 58.04, for the entry in column (3), the following entry shall be substituted, namely:- TULLES AND OTHER NET FABRICS, NOT INCLUDING WOVEN, KNITTED OR CROCHETED FABRICS; LACE IN THE PIECE, IN STRIPS OR IN MOTIFS, OTHER THAN FABRICS OF HEADING No. 60.02 ; (38) in Chapter 59,- (i) in NOTE 4, for clauses (c) and (d), the following clause shall be substituted, namely:- (c) Fabrics composed of parallel textile yarns agglomerated with rubber, irrespective of their weight per square metre. This heading does not, however, apply to plates, sheets or strip of cellular rubber, combined with textile fabric, where the textile fabric is present merely for reinforcing purposes (Chapter 40), or textile products of heading No. 58.11. ; (ii) in NOTE 7, in clause (a), for sub-clause (i), the following sub-clause shall be substituted, namely:- (i) Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, including narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles (weaving beams); ; (iii) in heading No. 59.10, for the entry in column (3), the following entry shall be substituted, namely:- TRANSMISSION OR CONVEYOR BELTS OR BELTING, OF TEXTILE MATERIAL, WHETHER OR NOT IMPREGATED, COATED, COVERED OR LAMINATED WITH PLASTICS, OR REINFOCED WITH METAL OR OTHER MATERIAL ; (iv) in heading No. 59.11, in subheading No. 5911.10, for the entry in column (3), the following entry shall be substituted, namely:- -Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, including narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles (weaving beams) ; (39) in Chapter 61, (i) in NOTE 3, for clause (a), the following clause shall be substituted, namely:- (a) The term suit means a set of garments composed of two or three pieces made up, in respect of their outer surface, in identical fabric and comprising: -one suit coat or jacket the outer shell of which, exclusive of sleeves, consists of four or more panels, designed to cover the upper part of the body, possibly with a tailored waistcoat in addition whose front is made from the same fabric as the outer surface of the other components of the set and whose back is made from the same fabric as the lining of the suit coat or jacket; and -one garment designed to cover the lower part of the body and consisting of trousers, breeches or shorts (other than swimwear), a skirt or a divided skirt, having neither braces nor bibs. All of the components of a suit must be of the same fabric construction, colour and composition; they must also be of the same style and of corresponding or compatible size. However, these components may have piping (a strip of fabric sewn into the seam) in a different fabric. If several separate components to cover the lower part of the body are presented together (for example, two pairs of trousers or trousers and shorts, or a skirt or divided skirt and trousers), the constituent lower part shall be one pair of trousers or, in the case of women s or girls suits, the skirt or divided skirt, the other garments being considered separately. The term suit includes the following sets of garments, whether or not they fulfil all the above conditions: -morning dress, comprising a plain jacket (cutaway) with rounded tails hanging well down at the back and striped trousers; -evening dress (tailcoat), generally made of black fabric, the jacket of which is relatively short at the front, does not close and has narrow skirts cut in at the hips and haging down behind; -dinner jacket suits, in which the jacket is similar in style to an ordinary jacket (though perhaps revealing more of the shirt front), but has shiny silk or imitation silk lapels. ; (ii) NOTES 5 to 9 shall be renumbered as NOTES 6 to 10 respectively and before NOTE 6 as so renumbered, the following NOTE shall be inserted, namely:- 5. Heading No. 61.09 does not cover garments with a drawstring, ribbed waistband or other means of tightening at the bottom of the garment. ; (iii) in heading no 61.16, in subheading No. 6116.10, for the entry in column (3), the following entry shall be substituted, namely:- -Impregnated, coated or covered with plastics or rubber ; (40) in Chapter 62, in NOTE 3, for clause (a), the following clause shall be substituted, namely:- (a) The term Suit means a set of garments composed of two or three pieces made up, in respect of their outer surface, in identical fabric and comprising: -one suit coat or jacket the outer shell of which, exclusive of sleeves, consists of four or more panels, designed to cover the upper part of the body, possibly with a tailored waits-coat in addition whose front is made from the same fabric as the outer surface of the other components of the set and whose back is made from the same fabric as the lining of the suit coat or jacket; and -one garment designed to cover the lower part of the body and consisting of trousers, breeches or shorts (other than swimwear), a skirt or a divided skirt, having neither braces nor bibs. All of the components of a suit must be of the same fabric construction, colour and composition; they must also be of the same style and of corresponding or compatible size. However, these components may have piping (a strip of fabric sewn into the seam) in a different fabric. If several separate components to cover the lower part of the body are presented together (for example, two pairs of trousers or trousers and shorts, or a skirt or divided skirt and trousers), the constituent lower part shall be one pair of trousers or, in the case of women s or girls suits, the skirt or divided skirt, the other garments being considered separately. The term suit includes the following sets of garments, whether or not they fulfill all the above conditions: -morning dress, comprising a plain jacket (cutaway) with rounded tails hanging well down at the back and striped trousers; -Evening dress (tailcoat), generally made of black fabric, the jacket of which is relatively short at the front, does not close and has narrow skirts cut in at the hips and hanging down behind; -dinner jacket suits, in which the jacket is similar in style to an ordinary jacket (though perhaps revealing more of the shirt front), but has shiny silk or imitation silk lapels. ; (41) in Chapter 64,- (i) in NOTE 1,- (a) for clause (a), the following clause shall be substituted, namely:- (a) Disposable foot or shoe coverings of flimsy material (for example, paper, sheeting of plastics) without applied soles. These products are classified according to their constituent material; ; (b) clauses (b) to (e) shall be renumbered as clauses (c) to (f) respectively and before clause (c) as so renumbered, the following clause shall be inserted, namely:- (b) Footwear of textile material, without an outer sole glued, sewn or otherwise affixed or applied to the upper (Section XI); ; (ii) for NOTES 2 and 3, the following NOTES shall be substituted, namely:- 2. For the purposes of heading No. 64.06, the term parts does not include pegs, protectors, eyelets, hooks, buckles, ornaments, braid, laces, pompons or other trimmings (which are to be classified in their appropriate headings) or buttons or other goods of heading No. 96.06. 3. For the purposes of this Chapter: (a) the terms rubber and plastics include woven fabrics or other textile products with an external layer of rubber or plastics being visible to the naked eye; for the purpose of this provision, no account should be taken of any resulting change of colour; and (b) the term leather refers to the goods of heading Nos. 41.04 to 41.09. ; (iii) in SUBHEADING NOTE, (a) in opening sentence, for the figures 6402.11 and 6403.11 , for the figures 6402.12 and 6403.12 shall respectively be substituted; (b) for clause (b), the following clause shall be substituted, namely: (b) skating boots, ski-boots and cross-country ski footwear, snowboard boots, wrestling boots, boxing boots and cycling shoes .; (42) in Chapter 68, (i) in heading No. 68.10, subheading No. 6810.20 and the entries relating thereto shall be omitted; (ii) in heading No. 68.15, for the entry in column (3), the following entry shall be substituted, namely:- ARTICLES OF STONE OR OF OTHER MINERAL SUBSTANCES (INCLUDING CARBON FIBRES, ARTICLES OF CARBON FIBRES AND ARTICLES OF PEAT), NOT ELSEWHERE SPECIFIED OR INCLUDED ; (43) in Chapter 69,- (i) in NOTE 2, clauses (b) to (1) shall be renumbered as clauses (c) to (m) respectively, and before clause (c) as so renumbered, the following clause shall be inserted, namely: (b) Articles of heading No. 68.04; ; (ii) in heading No. 69.03, in subheading No. 6903.10, for the entry in column (3), the following entry shall be substituted, namely: -Containing by weight more than 50% of graphite or other carbon or of a mixture of these products ; (44) in Chapter 70, (i) in NOTE 2, for clause (c), the following clause shall be substituted, namely:- (c) the expression absorbent, reflecting or non-reflecting layer means a microscopically thin coating of metal or of a chemical compound (for example, metal oxide) which absorbs, for example, infra-red light or improves the reflecting qualities of the glass while still allowing it to retain a degree of transparency or translucency; or which prevents light from being reflected on the surface of the glass. ; (ii) in heading No. 70.03, for the entry in column (3), the following entry shall be substituted, namely:- CAST GLASS AND ROLLED GLASS, IN SHEETS, OR PROFILES, WHETHER OR NOT HAVING AN ABSORBENT, REFLECTING OR NON-REFLECTING LAYER, BUT NOT OTHERWISE WORKED ; (iii) in heading No. 70.04, for the entry in column (3), the following entry shall be substituted, namely:- DRAWN GLASS AND BLOWN GLASS, IN SHEETS, WHETHER OR NOT HAVING AN ABSORBENT, REFLECTING OR NON- REFLECTING LAYER, BUT NOT OTHERWISE WORKED ; (iv) in heading No. 70.05,--- (a) for the entry in column (3), the following entry shall be substituted, namely:- FLOAT GLASS AND SURFACE GROUND OR POLISHED GLASS, IN SHEETS, WHETHER OR NOT HAVING AN ABSORBENT, REFLECTING OR NON-REFLECTING LAYER, BUT NOT OTHERWISE WORKED ; (b) in heading No. 7005.10, for the entry in column (3), the following entry shall be substituted, namely:- -Non-wired glass, having an absorbent, reflecting or non- reflecting layer ; (45) in Chapter 71,- (i) in NOTE 3, (a) clauses (d) to (o) shall be renumbered as clauses (e) to (p) respectively and before clause (e) as so renumbered, the following clause shall be inserted, namely: (d) Supported catalysts (heading No. 38.15); ; (b) for clause (e) as so renumbered, the following clause shall be substituted, namely:- (e) Articles of heading No. 42.02 or 42.03 referred to in Note 2 (B) to Chapter 42; ; (ii) NOTES 8, 9 and 10 shall be renumbered as NOTES 9, 10 and 11 respectively and before NOTE 9 as so renumbered; the following NOTE shall be inserted, namely:- 8. Subject to Note 1 (a) to Section VI, goods answering to a description in heading No. 71.12 are to be classified in that heading and in no other heading of this Schedule. ; (iii) in NOTE 11 as so renumbered, for the word and figure NOTE 8 , the word and figure NOTE 9 shall be substituted; (iv) in heading No. 71.01, in column (3), the word UNGRADED shall be omitted; (v) in heading No. 71.12, for the entry in column (3), the following entry shall be substituted, namely:- WASTE AND SCRAP OF PRECIOUS METAL OR OF METAL CLAD WITH PRECIOUS METAL; OTHER WASTE AND SCRAP CONTAINING PRECIOUS METAL OR PRECIOUS METAL COMPOUNDS, OF A KIND USED PRINCIPALLY FOR THE RECOVERY OF PRECIOUS METAL ; (46) in SECTION XV,- (i) NOTES 3 to 6 shall be renumbered as NOTES 5 to 8 respectively and before NOTES 5 as so renumbered, the following NOTES shall be inserted, namely:- 3. Throughout this Schedule, the expression base metals means: iron and steel, copper, nickel, aluminium, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, ehromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium. 4. Throughout this Schedule, the term cermets means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term cermets includes sintered metal carbides (metal carbides sintered with a metal). ; (ii) in NOTE 6 as so renumbered and in clause (b) of NOTE 7 as so renumbered, for the word and figure NOTE 3 , the word and figure NOTE 5 shall be substituted; (47) in Chapter 72,- (i) in NOTE 1, for clauses (1) and (m), the following clauses shall be substituted, namely:- (l) Bars and rods, hot-rolled, in irregularly wound coils Hot-rolled products in irregularly wound coils, which have a solid cross- section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including flattened circles and modified rectangles , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods). (m) Other bars and rods Products which do not conform to any of the definitions at (ij), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including flattened circles and modified rectangles , of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel. These products may: -have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods); ; -be twisted after rolling. ; (ii) in SUBHEADING NOTE 1, for clause (e), the following clause shall be substituted, namely:- (e) Silico manganese steel Alloy steels containing by weight: -not more than 0.7% of carbon ; -0.5% or more but not more than 1.9% of manganese, and -0.6% or more but not more than 2.3% of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel. ; (48) in Chapter 73, in heading No. 73.05, for the entry in column (3), the following entry shall be substituted, namely:- OTHER TUBES AND PIPES (FOR EXAMPLE, WELDED, RIVETED OR SIMILARLY CLOSED), HAVING CIRCULAR CROSS-SECTIONS, THE EXTERNAL DIAMETER OF WHICH EXCEEDS 406.4 MM, OF IRON OR STEEL ; (49) in Chapter 75, after the NOTE, (i) for the words SUBHEADING NOTE , the words SUBHEADING NOTES shall be substituted; (ii) the existing SUBHEADING NOTE shall be numbered as SUBHEADING NOTE 1 thereof, and after SUBH ADING NOTE 1, as so numbered, the following SUBHEADING NOTE shall be inserted, namely:- 2 Notwithstanding the provisions of Chapter Note 1 (c), for the purposes of subheading No. 7508.10, the term wire applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. ; (50) in Chapter 76, after the NOTE,- (i) for the words SUBHEADING NOTE , the words SUBHEADING NOTES shall be substituted; (ii) the existing SUBHEADING NOTE shall be numbered as SUBHEADING NOTE 1 thereof, and after SUBHEADING NOTE 1 as so numbered, the following SUBHEADING NOTE shall be inserted, namely:- 2 Notwithstanding the provisions of Chapter Note 1 (c), for the purposes of subheading No. 7616.91, the term wire applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm. ; (51) in Chapter 82, in heading No. 82.09, in column (3), the words SINTERED METAL CARBIDES OR shall be omitted. (52) in SECTION XVI, (i) in NOTE 1, in clause (o), for the words and figures of heading No. 96.03 , the brackets, words and figures (heading No. 96.03) shall be substituted; (ii) in NOTE 2,- (a) in clause (a), for the brackets, words and figures (other than heading Nos. 84.85 and 85.48) , the brackets, words and figures (other than heading Nos. 84.09, 84.31, 84.48, 84.66, 84.73, 84.85, 85.03, 85.22, 85.29, 85.38 and 85.48) shall be substituted; (b) in clause (b), for the words of that kind , the words and figures of that kind or in heading No. 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38 as appropriate shall be substituted; (c) for clause (c), the following clause shall be substituted, namely:- (c) All other parts are to be classified in heading No. 84.09, 84.31, 84.48, 84.66, 84.73, 85.03, 85.22, 85.29 or 85.38 as appropriate or, failing that, in heading No. 84.85 or 85.48. ; (53) in Chapter 84,- (i) in NOTE 1, for clause (b), the following clause shall be substituted, namely:- (b) Machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69); ; (ii) in NOTE 2, the following shall be inserted at the end, namely:- Heading No. 84.24 does not cover: Ink-jet printing machines (heading No. 84.43 or 84.71). ; (iii) for NOTE 4, the following NOTE shall be substituted, namely:- 4. Heading No. 84.57 applies only to machine-tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either: (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres), (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station), or (c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines). ; (iv) in NOTE 5, for clause (B) and the portion beginning with the words Heading No. and ending with the words in residual headings , the following clauses shall be substituted, namely:- (B) Automatic data processing machines may be in the form of systems consisting of a variable number of separate units. Subject to paragraph (E) below, a unit is to be regarded as being a part of a complete system if it meets all of the following conditions: (a) It is of a kind solely or principally used in an automatic data processing system; (b) It is connectable to the central processing unit either directly or through one or more other units; and (c) It is able to accept or deliver data in a form (codes or signals) which can be used by the system. (C) Separately presented units of an automatic data processing machine are to be classified in heading No. 84.71 (D) Printers, keyboards, X-Y co-ordinate input devices and disk storage units which satisfy the conditions of paragraphs (B) (b) and (B) (c) above, are in all cases to be classified as units of heading No. 84.71. (E) Machines performing a specific function other than data processing and incorporating or working in conjunction with an automatic data processing machine are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings. ; (v) after NOTE 7, the following NOTE shall be inserted, namely:- 8. For the purposes of heading No. 84.70, the term pocket-size applies only to machines the dimensions of which do not exceed 170 mm. x 100 mm. x 45 mm. ; (vi) after NOTE 8, as so inserted, (a) for the words SUB-HEADING NOTE , the words SUB-HEADING NOTES shall be substituted; (b) existing SUB-HEADING NOTE shall be numbered as SUB- HEADING NOTE 2 thereof and before SUB-HEADING NOTE 2 as so numbered, the following SUB-HEADING NOTE shall be inserted, namely:- 1. For the purposes of Sub-heading No. 8471.49, the term systems means automatic data processing machines whose units satisfy the conditions laid down in NOTE 5 (B) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer). ; (vii) in heading No. 84.22,- (a) for the entry in column (3), the following entry shall be substituted, namely: DISH WASHING MACHINES; MACHINERY FOR CLEANING OR DRYING BOTTLES OR OTHER CONTAINERS; MACHINERY FOR FILLING, CLOSING, SEALING OR LABELLING BOTTLES, CANS, BOXES, BAGS OR OTHER CONTAINERS; MACHINERY FOR CAPSULING BOTTLES, JARS, TUBES AND SIMILAR CONTAINERS; OTHER PACKING OR WRAPPING MACHINERY (INCLUDING HEAT-SHRINK WRAPPING MACHINERY); MACHINERY FOR AERATING BEVERAGES ; (b) in sub-heading No. 8422.30, for the entry in column (3), the following entry shall be substituted, namely:- -Machinery for filling, closing, sealing, or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages ; (c) in sub-heading No. 8422.40, for the entry in column (3), the following entry shall be substituted, namely:- -Other packing or wrapping machinery (including heat-shrink wrapping machinery) ; (viii) in heading No. 84.43, for the entry in column (3), the following entry shall be substituted, namely:- PRINTING MACHINERY, INCLUDING INK-JET PRINTING MACHINES, OTHER THAN THOSE OF HEADING NO. 84.71; MACHINES FOR USES ANCILLARY TO PRINTING ; (ix) in heading No. 84.58, for the entry in column (3), the following entry shall be substituted, namely:- LATHES (INCLUDING TURNING CENTRES) FOR REMOVING METAL ; (x) in heading No. 84.59, for the entry in column (3), the following entry shall be substituted, namely: MACHINE-TOOLS (INCLUDING WAY-TYPE UNIT HEAD MACHINES) FOR DRILLING, BORING, MILLING, THREADING OR TAPPING BY REMOVING METAL, OTHER THAN LATHES (INCLUDING TURNING CENTRES) OF HEADING NO. 84.58 ; (xi) in heading No. 84.60, in column (3), the words ,SINTERED METAL CARBIDES shall be omitted; (xii) in heading No. 84.61, in column (3), the words ,SINTERED METAL CARBIDES shall be omitted; (xiii) in heading No. 84.63, in column (3), the words ,SINTERED METAL CARBIDES shall be omitted; (xiv) in heading No. 84.67, for the entry in column (3), the following entry shall be substituted, namely:- TOOLS FOR WORKING IN THE HAND, PNEUMATIC, HYDRAULIC OR WITH SELF-CONTAINED NON-ELECTRIC MOTOR ; (xv) in heading No. 84.70,- (a) for the entry in column (3), the following entry shall be substituted, namely: CALCULATING MACHINES AND POCKET-SIZE DATA RECORDING, REPRODUCING AND DISPLAYING MACHINES WITH CALCULATING FUNCTIONS; ACCOUNTING MACHINES, POSTAGE-FRANKING MACHINES, TICKET-ISSUING MACHINES AND SIMILAR MACHINES, INCORPORATING A CALCULATING DEVICE; CASH REGISTERS ; (b) in subheading No. 8470.10, in column (3), for the words external source of power , the words external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functions shall be substituted; (xvi) in heading No. 84.83, (a) in column (3), for the words BALL SCREWS , the words BALL OR ROLLER SCREWS shall be substituted; (b) in subheading No. 8483.40, in column (3), for the words ball screws , the words ball or roller screws shall be substituted; (xvii) in heading No. 84.84, in column (3), for the words SIMILAR PACKINGS , the words SIMILAR PACKINGS; MECHANICAL SEALS shall be substituted; (54) in Chapter 85,- (i) in NOTE 4, for the portion beginning with the words The term and ending with the words connecting elements , the following shall be substituted, namely: The expression printed circuits does not cover circuits combined with elements other than those obtained during the printing process, nor does it cover individual, discreet resistors, capacitors or inductances. Printed circuits may, however, be fitted with non-printed connecting elements. ; (ii) after NOTE 6, the following NOTE and SUBHEADING NOTE shall be inserted, namely:- 7. For the purposes of heading No. 85.48, spent primary cells, spent primary batteries and spent electric accumulators are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged. SUB-HEADING NOTE Sub-heading Nos. 8519.92 and 8527.12 cover only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm. x 100 mm. x 45 mm. ; (iii) in heading No. 85.10, for the entry in column (3), the following entry shall be substituted, namely:- SHAVERS, HAIR CLIPPERS AND HAIR-REMOVING APPLIANCES, WITH SELF-CONTAINED ELECTRIC MOTOR ; (iv) in heading No. 85.15, in column (3), for the words SINTERED METAL CARBIDES , the word CERMETS shall be substituted; (v) in heading No. 85.22, for the entry in column (3), the following entry shall be substituted, namely:- PARTS AND ACCESSORIES SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE APPARATUS OF HEADING Nos. 85.19 to 85.21 ; (vi) in heading No. 85.25, for the entry in column (3), the following entry shall be substituted, namely:- TRANSMISSION APPARATUS FOR RADIO-TELEPHONY, RADIO-TELEGRAPHY, RADIO-BROADCASTING .OR TELEVISION, WHETHER OR NOT INCORPORATING RECEPTION APPARATUS OR SOUND-RECORDING OR REPRODUCING APPARATUS; TELEVISION CAMERAS; STILL IMAGE VIDEO CAMERAS AND OTHER VIDEO CAMERA RECORDERS ; (vii) in heading No. 85.37, for the entry in column (3), the following entry shall be substituted, namely:- BOARDS, PANELS, CONSOLES, DESKS, CABINETS AND OTHER BASES, EQUIPPED WITH TWO OR MORE APPARATUS OF HEADING No. 85.35 OR 85.36, FOR ELECTRIC CONTROL OR THE DISTRIBUTION OF ELECTRICITY, INCLUDING THOSE INCORPORATING INSTRUMENTS ORAPPARATUS OF CHAPTER 90, AND NUMERICAL CONTROL APPARATUS, OTHER THAN SWITCHING APPARATUS OF HEADING No. 85.17 ; (55) in SECTION XVII, for NOTE 4, the following NOTE shall be substituted, namely: 4. For the purposes of this Section: (a) Vehicles specially constructed to travel on both road and rail are classified under the appropriate heading of Chapter 87; (b) Amphibious motor vehicles are classified under the appropriate heading of Chapter 87; (c) Aircraft specially constructed so that they can also be used as road vehicles are classified under the appropriate heading of Chapter 88. ; (56) in Chapter 87, in NOTE 2, the following paragraph shall be inserted, namely: Machines and working tools designed for fitting to tractors of heading No. 87.01 as interchangeable equipment remain classified in their respective headings even if presented with the tractor, and whether or not mounted on it. ; (57) in Chapter 88,- (i) after the title of the Chapter, the following shall be inserted, namely: SUB-HEADING NOTE For the purposes of sub-heading Nos. 8802.11 to 8802.40, the expression unladen weight means the weight of the machine in normal flying order, excluding the weight of the crew and of fuel and equipment other than permanently fitted items of equipment. ; (ii) in heading No. 88.02, for the entry in column (3), the following entry shall be substituted, namely:- OTHER AIRCRAFT (FOR EXAMPLE, HELICOPTERS, AEROPLANES); SPACECRAFT (INCLUDING SATELLITES) AND SUBORBITAL AND SPACECRAFT LAUNCH VEHICLES ; (iii) in heading No. 88.04, for the entry in column (3), the following entry shall be substituted, namely: PARACHUTES (INCLUDING DRIGIBLE PARACHUTES AND PARAGLIDERS) AND ROTOCHUTES; PARTS THEREOF AND ACCESSORIES THERETO ; (58) in Chapter 90,- (i) in NOTE 1, in clause (h), for the words, brackets and figures sound heads (heading No. 85.22); , the words, brackets and figures sound heads (heading No. 85.22); still image video camera and other video camera recorders (heading No. 85.25); shall be substituted; (ii) in heading No. 90.10, in column (3), for the words APPARATUS FOR THE PROJECTION , the words APPARATUS FOR THE PROJECTION OR DRAWING shall be substituted; (iii) in heading No. 90.25, subheading No. 9025.20 and the entries relating thereto shall be omitted; (59) in Chapter 91,- (i) in heading No. 91.01, (a) in the portion occurring immediately after heading No. 91.01, in column (3), for the words -Wrist-watches, battery or accumulator powered, whether or not incorporating a stop-watch facility: , the following words shall be substituted, namely:- -Wrist-watches, electrically operated, whether or not incorporating a stop-watch facility: ; (b) in subheading No. 9101.91, for the entry in column (3), the following entry shall be substituted, namely:- --Electrically operated ; (ii) in heading No. 91.02,- (a) in the portion occurring immediately after heading No. 91.02, in column (3), for the words -Wrist-watches, battery or accumulator powered, whether or not incorporating a stop-watch facility: the following words shall be substituted, namely: - -Wrist-watches, electrically operated, whether or not incorporating a stop-watch facility: ; (b) in subheading No. 9102.91, for the entry in column (3), the following entry shall be substituted, namely:- --Electrically operated ; (iii) in heading No. 91.03, in subheading No. 9103.10, for the entry in column (3), the following entry shall be substituted, namely:- - Electrically operated ; (iv) in heading No. 91.05,- (a) in subheading No. 9105.11, for the entry in column (3), the following entry shall be substituted, namely:- --Electrically operated ; (b) in subheading No. 9105.21, for the entry in column (3), the following entry shall be substituted, namely: --Electrically operated ; (c) in subheading No. 9105.91, for the entry in column (3), the following entry shall be substituted, namely:- --Electrically operated ; (v) in heading No. 91.08, in the portion occurring immediately after heading No. 91.08, in column (3), for the words -Battery or accumulator powered: , the following words shall be substituted, namely:- - Electrically operated ; (vi) in heading No. 91.09, in the portion occurring immediately after heading No. 91.09, in column (3), for the words -Battery or accumulator powered: , the following words shall be substituted, namely:- -Electrically operated: ; (60) in Chapter 92, in heading No. 92.06, in column (3), for the words MARACCAS , the word MARACAS shall be substituted; (61) in Chapter 95, in NOTE 1, for clause (m), the following clause shall be substituted, namely: (m) Pumps for liquids (heading No. 84.13), filtering or purifying machinery and apparatus for liquids or gases (heading No. 84.21), electric motors (heading No. 85.01), electric transformers (heading No. 85.04) or radio remote control apparatus (heading No. 85.26); ; (62) in Chapter 96, in heading No. 96.14, subheading No. 9614.10 and the entries relating thereto shall be omitted; (63) in Chapter 97, for NOTE 3, the following NOTE shall be substituted, namely:- 3. Heading No. 97.03 does not apply to mass-produced reproductions or works of conventional craftsmanship of a commercial character, even if these articles are designed or created by artists. . PART II Heading No. Sub-heading No. Description of article Rate of duty Standard Preferential Areas 1 2 3 4 5 In the First Schedule to the Customs Tariff Act,- (1) in Chapter 1, for heading No. 01.05, subheading Nos. 0105.11, 0105.19, 0105.91 and 0105.99 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 01.05 LIVE POULTRY, THAT IS TO SAY, FOWLS OF THE SPECIES GALLUS DOMESTICUS, DUCKS, GEESE, TURKEYS AND GUINEA FOWLS -Weighing not more than 185g: 0105.11 -- Fowls of the species Gallus domesticus 50% .. 0105.12 -- Turkeys 50% .. 0105.19 -- Other 50% .. -Other: 0105.92 -- Fowls of the species Gallus domesticus, weighing not more than 2,000 g 50% .. 0105.93 -- Fowls of the species Gallus domesticus, weighing more than 2,000 g 50% .. 0105.99 -- Other 50% .. ; (2) in Chapter 2, for heading No. 02.07, subheading Nos. 0207.10, 0207.21, 0207.22, 0207.23,0207.31, 0207.39, 0207.41, 0207.42, 0207.43 and 0207.50 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 02.07 MEAT, AND EDIBLE OFFAL, OF THE POULTRY OF HEADING No. 01:05, FRESH, CHILLED OR FROZEN - Of fowls of the species Gallus domesticus: 0207.11 -- Not cut in pieces, fresh or chilled 10% .. 0207.12 -- Not cut in pieces, frozen 10% .. 0207.13 -- Cuts and offal, fresh or chilled 10% .. 0207.14 -- Cuts and offal, frozen 10% .. - Of turkeys: 0207.24 -- Not cut in pieces, fresh or chilled 10% .. 0207.25 -- Not cut in pieces, frozen 10% .. 0207.26 -- Cuts and offal, fresh or chilled 10% .. 0207.27 -- Cuts and offal, frozen 10% .. - Of ducks, geese or guinea fowls: 0207.32 -- Not cut in pieces, fresh or chilled 10% .. 0207.33 -- Not cut in pieces, frozen 10% .. 0207.34 -- Fatty livers, fresh or chilled 10% .. 0207.35 -- Other, fresh or chilled 10% .. 0207.36 -- Other, frozen 10% .. (3) in Chapter 4, for heading No. 04.05 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 04.05 BUTTER AND OTHER FATS AND OILS DERIVED FROM MILK; DAIRY SPREADS 0405.10 - Butter 40% .. 0405.20 - Dairy spreads 40% .. 0405.90 - Other 40% .. ; (4) in Chapter 6, in heading No. 06.02, after subheading No. 0602.40 and the entries relating thereto, for the word -Other. and subheading Nos. 0602.91 and 0602.99 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 0602.90 - Other 10% .. ; (5) in Chapter 8, (i) in heading No. 08.01, for subheading Nos. 0801.10, 0801.20 and 0801.30 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- Coconuts: 0801.11 -- Desiccated 50% 40% 0801.19 -- Other 50% 40% - Brazil nuts: 0801.21 -- In shell 50% 40% 0801.22 -- Shelled 50% 40% Cashew nuts: 0801.31 -- In shell 50% 40% 0801.32 -- Shelled 50% 40% ; (ii) in heading No. 08:07, for subheading No. 0807.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Melons (including watermelons): 0807.11 -- Watermelons 50% 40% 0801.19 -- Other 50% 40% ; (iii) in heading No. 08.10, after subheading No. 0810.40 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 0810.50 - Kiwifruit 50% 40% ; (6) in Chapter 9, in heading No. 09.01, for subheading Nos. 0901.30 and 0901.40 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 0901.90 - Other 10% 10% less 13 paise per kg. ; (7) in Chapter 14, in heading No. 14.02, after subheading No. 1402.10 and the entries relating thereto, for the word -Other. and subheading Nos. 1402.91 and 1402.99 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 1402.90 Other 10% .. ; (8) in Chapter 15, for heading No. 15.20, subheading Nos. 1520.10 and 1520.90 and the entries relating thereto, the following heading and entries shall be substituted, namely:- 15.20 1520.00 GLYCEROL, CRUDE; GLYCEROL WATERS AND GLYCEROL LYES 50% .. ; (9) in Chapter 16, in heading No. 16.02, after subheading No.1602.31 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 1602.32 -- Of fowls of the species Gallus domesticus 50% .. ; (10) in Chapter 17, in heading No. 17.02, for subheading No.1702.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- Lactose and lactose syrup: 1702.11 Containing by weight 99% or more lactose, expressed as anhydrous Lactose calculated on the dry matter 25% .. 1702.19 -- Other 25% .. ; (11) in Chapter 19, in heading No.19.04, after subheading No. 1904.10 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 1904.20 - Prepared foods obtained from unroasted cereal flakes or from mixtures of unroasted cereal flakes and roasted cereal flakes or swelled cereals 50% .. ; (12) in Chapter 21, in heading No. 21.01, for subheading No.2101.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -Extracts, essences and concentrates of coffee, and preparations with a basis of these extracts, essences or concentrates or with a basis of coffee: 2101.11 -- Extracts, essences and concentrates 50% .. 2101.12 -- Preparations with a basis of extracts, essences or concentrates or with a basis of coffee 50% .. ; (13) in Chapter 22, in heading No. 22.08, after subheading No. 2208.50 and the entries relating thereto, the following subheadings and entries shall be inserted, namely: 2208.60 - Vodka 290% .. 2208.70 - Liqueurs and cordials 290% .. ; (14) in Chapter 23, in heading No. 23.06, after subheading No. 2306.60 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 2306.70 - Of maize (corn) germ 50% .. ; (15) in Chapter 25,- (i) for heading No. 25.03, subheading Nos. 2503.10 and 2503.90 and the entries relating thereto, the following heading and entries shall be substituted, namely: 25.03 2503.00 SULPHUR OF ALL KINDS, OTHER THAN SUBLIMED SULPHUR, PRECIPITATED SULPHUR AND COLLOIDAL SULPHUR 50% .. ; (ii) in heading No. 25.13, after subheading No. 2513.19 and the entries relating thereto, for the words - Emery, natural corundum, natural garnet and other natural abrasives: and subheading Nos. 2513.21 and 2513.29 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 2513.20 Emery, natural corundum, natural garnet and other natural abrasives 50% .. ; (16) in Chapter 28,- (i) in heading No.28.41, for subheading No. 2841.60 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Manganites, manganates and permanganates: 2841.61 -- Potassium permanganate 50% .. 2841.69 -- Other 50% .. ; (ii) for heading No.28.48, subheading Nos. 2848.10 and 2848,90 and the entries relating thereto, the following heading and entries shall be substituted, namely:- 28.48 2848.00 - PHOSPHIDES, WHETHER OR NOT CHEMICALLY DEFINED, EXCLUDING FERRO-PHOSPHORUS 50% .. ; (17) in Chapter 29,- (i) in heading No. 29.03, for subheading No. 2903.40 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: - Halogenated derivatives of acyclic hydrocarbons containing two or more different halogens: 2903.41 -- Trichlorofluoromethane. 50% .. 2903.42 -- Dichlorodifluoromethane 50% .. 2903.43 -- Trichlorotrifluoroethanes 50% .. 2903.44 -- Dichlorotetrafluoroethanes and chloropentafluoroethane 50% .. 2903.45 -- Other derivatives perhalogenated only with fluorine and chlorine 50% .. 2903.46 -- Bromochlorodifluoromethane bromotrifluromethane and dibromotetrafluoroethanes 50% .. 2903.47 -- Other perhalogenated derivatives 50% .. 2903.49 -- Other 50% .. ; (ii) in heading No. 29.05, after subheading No. 2905.44 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 2905.45 -- Glycerol 50% .. ; (iii) in heading No. 29.14,- (a) for subheading No. 2914.30 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Aromatic ketones without other oxygen function: 2914.31 -- Phenylacetone (1-phenylpropan-2-one) 50% .. 2914.39 -- Other 50% .. ; (b) after subheading No. 2914.30 as substituted by subheading Nos. 2914.31 and 2914.39, for the words Ketone-alcohols and ketone-aldehydes: and subheading Nos. 2914.41 and 2914.49 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 2914.40 Ketone-alcohols and ketone-aldehydes 50% .. ; (iv) in heading No. 29.16, for subheading No. 2916.33 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 2916.34 -- Phenylacetic acid and its salts 50% .. 2916.35 -- Esters of phenylacetic acid 50% .. ; (v) in heading No. 29.22, after subheading No. 2922.42 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 2922.43 Anthranilic acid and its salts 50% .. ; (vi) in heading No. 29.24, after subheading No. 2924.21 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 2924.22 -- 2-Acetamidobenzoic acid 50% .. ; (vii) in heading No. 29.32, for subheading No. 2932.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- Other: 2932.91 -- Isosafrole 50% .. 2932.92 -- 1-(1,3-Benzodioxol-5-yl) propan-2-one 50% .. 2932.93 -- Piperonal 50% .. 2932.94 -- Safrole 50% .. 2932.99 -- Other 50% .. ; (viii) in heading No. 29.33, after subheading No. 2933.31 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 2933.32 -- Piperidine and its salts 50% .. ; (ix) in heading No. 29.39,- (a) for subheading No. 2939.40 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- Ephedrines and their salts: 2939.41 -- Ephedrine and its salts 50% 40% 2939.42 -- Pseudoephedrine (INN) and its salts 50% 40% 2939.49 -- Other 50% 40% ; (b) for subheading No. 2939.60 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Alkaloids of rye ergot and their derivatives; salts thereof: 2939.61 -- Ergometrine (INN) and its salts 50% .. 2939.62 -- Ergotamine (INN) and its salts 50% .. 2939.63 -- Lysergic acid and its salts 50% .. 2939.69 -- Other 50% .. ; (18) in Chapter 30, in heading No. 30.02, after subheading No. 3002.20 and the entries relating thereto, for the words - Vaccines for veterinary medicine: and subheading Nos. 3002.31 and 3002.39 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 3002.30 - Vaccines for veterinary medicine 50% 40% ; (19) in Chapter 32, in heading No. 32.06, for subheading No. 3206.10 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- - Pigments and preparations based on titanium dioxide: 3206.11 -- Containing 80% or more by weight of titanium dioxide calculated on the dry weight 50% .. 3206.19 -- Other 50% .. ; (20) in Chapter 33, for heading No. 33.06, subheading Nos. 3306.10 and 3306.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 33.06 PREPARATIONS FOR ORAL OR DENTAL HYGIENE, INCLUDING DENTURE FIXATIVE PASTES AND POWDERS; YARN USED TO CLEAN BETWEEN THE TEETH (DENTAL FLOSS), IN INDIVIDUAL RETAIL PACKAGES 3306.10 -- Dentifrices 50% .. 3306.20 -- Yarn used to clean between the teeth (dental floss) 50% .. 3306.90 -- Other 50% .. ; (21) in Chapter 35, in heading No. 35.02, for subheading Nos. 3502.10 and 3502.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: - Egg albumin: 3502.11 -- Dried 50% .. 3502.19 -- Other 50% .. 3502.20 -- Milk albumin, including concentrates of two or more whey proteins 50% .. 3502.90 - Other 50% .. ; (22) in Chapter 38, for heading No. 38.23, subheading Nos. 3823.10, 3823.20, 3823.30, 3823.40, 3823.50, 3823.60 and 3823.90 and the entries relating thereto, the following headings, subheadings and entries shall be substituted, namely:- 38.23 INDUSTRIAL MONOCARBOXYLIC FATTY ACIDS; ACID OILS FROM REFINING; INDUSTRIAL FATTY ALCOHOLS - Industrial monocarboxylic fatty acids; acid oils from refining: 3823.11 -- Stearic acid 50% .. 3823.12 -- Oleic acid 50% .. 3823.13 -- Tall oil fatty acids 50% .. 3823.19 -- Other 50% .. 3823.70 -- Industrial fatty alcohols 50% .. 38.24 PREPARED BINDERS FOR FOUNDRY MOULDS OR CORES; CHEMICAL PRODUCTS AND PREPARATIONS OF THE CHEMICAL OR ALLIED INDUSTRIES (INCLUDING THOSE CONSISTING OF MIXTURES OF NATURAL PRODUCTS), NOT ELSEWHERE SPECIFIED OR IN CLUDED; RESIDUAL PRODUCTS OF THE CHEMICAL OR ALLIED INDUSTRIES, NOT ELSEWHERE SPECIFIED OR INCLUDED 3824.10 - Prepared binders for foundry moulds or cores 50% .. 3824.20 - Naphthenic acids, their water-insoluble salts and their esters 50% .. 3824.30 - Non-agglomerated metal carbides mixed together or with metallic binders 50% .. 3824.40 - Prepared additives for cements, mortars or concretes 50% .. 3824.50 - Non-refractory mortars and concretes 50% .. 3824.60 - Sorbitol other than that of sub-heading No. 2905.44 50% .. - Mixtures containing perhalogenated derivatives of acyclic hydrocarbons containing two or more different halogens: 3824.71 -- Containing acyclic hydrocarbons perhalogenated only with fluorine and chlorine 50% .. 3824.79 -- Other 50% .. 3824.90 - Other 50% .. ; (23) in Chapter 39, for heading No. 39.05, subheading Nos. 3905.11, 3905.19, 3905.20 and 3905.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 39.05 POLYMERS OF VINYL ACETATE OR OF OTHER VINYL ESTERS, IN PRIMARY FORMS; OTHER VINYL POLYMERS IN PRIMARY FORMS - Polyvinyl acetate: 3905.12 -- In aqueous dispersion 50% .. 3905.19 -- Other 50% .. - Vinyl acetate copolymers: 3905.21 -- In aqueous dispersion 50% .. 3905.29 -- Other 50% .. 3905.30 - Polyvinyl alcohol, whether or not containing unhydrolysed acetate groups 50% .. - Other: 3905.91 -- Copolymers 50% .. 3905.99 -- Other 50% .. ; (24) in Chapter 40, for heading No. 40.10, subheading Nos. 4010.10, 4010.91 and 4010.99 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 40.10 CONVEYOR OR TRANSMISSION BELTS OR BELTING, OF VULCANISED RUBBER - Conveyor belts or belting: 4010.11 -- Reinforced only with metal 50% .. 4910.12 -- Reinforced only with textile materials 50% .. 4010.13 -- Reinforced only with plastics 50% .. 4010.19 - Other 50% .. - Transmission belts or belting: 4010.21 -- Endless transmission belts of trape-zoidalcross-section (V-belts), whether or not grooved, of a circumference exceeding 60 cm but not exceeding 180 cm 50% .. 4010.22 -- Endless transmission belts of trape-zoidalcross-section (V-belts), whether or not grooved, of a circumference exceeding 180 cm but not exceeding 240 cm 50% .. 4010.23 -- Endless synchronous belts, of a circumference exceeding 60 cm but not exceeding 150 cm 50% .. 4010.24 -- Endless synchronous belts, of a circumference exceeding 150 cm but not exceeding 198 cm 50% .. 4010.29 -- Other 50% .. ; (25) in Chapter 44, (i) in heading No. 44.03, after subheading No. 4403.20 and the entries relating thereto, for the words -Other, of the following tropical woods: , subheading Nos. 4403.31, 4403.32, 4403.33, 4403.34 and 4403.35 and the entries relating thereto, the following subheadings and entries, shall be substituted, namely:- - Other of tropical wood specified in Subheading Note 1 to this Chapter: 4403.41 -- Dark Red Meranti, Light Red Meranti and Meranti Bakau 25% .. 4403.49 -- Other 25% .. ; (ii) in heading No. 44.07, after subheading No. 4407.10 and the entries relating thereto, for the words . Of the following tropical woods: and subheading Nos. 4407.21, 4407.22 and 4407.23 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Of tropical wood specified in Sub-heading Note I to this Chapter: 4407.24 -- Virola, Mahogany (Swietenia spp.) Imbula and Balsa 50% .. 4407.25 -- Dark Red Meranti, Light Red Meranti and Meranti Bakau 50% .. 4407.26 White Lauan, White Meranti, White Seraya, Yellow Meranti and Alan 50% .. 4407.29 -- Other 50% .. ; (iii) in heading No. 44.08, for subheading No. 4408.20 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Of tropical wood specified in Subheading Note 1 to this Chapter: 4408.31 - Dark Red Meranti, Light Red Meranti and Meranti Bakau 50% .. 4408.39 - Other 50% .. ; (iv) in heading No. 44.10, for subheading No. 4410.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Of wood: 4410.11 -- Waferboard, including oriented strand board 50% .. 4410.19 -- Other 50% .. ; (v) for heading No. 44.12, subheading Nos. 4412.11, 4412.12, 4412.19, 4412.21, 4412.29, 4412.91 and 4412.99 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 44.12 PLYWOOD, VENEERED PANELS AND SIMILAR LAMINATED WOOD - Plywood, consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: 4412.13 With at least one outer ply of tropical wood specified in Sub-heading Note 1 to this Chapter 50% .. 4412.14 Other, with at least one outer ply of non-coniferous wood 50% .. 4412.19 -- Other Other, with at least one outer ply of non-coniferous wood: 50% .. 4412.22 -- With at least one ply of tropical wood specified in Subheading Note 1 to this Chapter 50% .. 4412.23 -- Other, containing at least one layer of particle board 50% .. 4412.29 -- Other 50% .. - Other: 4412.92 -- With at least one ply of tropical wood specified in Subheading Note 1 to this Chapter 50% .. 4412.93 Other, containing at least one layer of particle board 50% .. 4412.99 -- Other 50% .. ; (26) in Chapter 47, in heading No. 47.06, after subheading No. 4706.10 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 4706.20 - Pulps of fibres derived from recovered (waste and scrap) paper or paper board 40% .. ; (27) in Chapter 48, in heading No. 48.07, after subheading 4807.10 and the entries relating thereto, for the word - Other and subheading Nos. 4807.91 and 4807.99 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 4807.90 - Other 50% .. ; (28) in Chapter 52, in heading No. 52.05, (i) for subheading No. 5205.25 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 5205.26 -- Measuring less than 125 decitex but not less than 106.38 decitex (exceeding 80 metric number but not exceeding 94 metric number) 50% .. 5205.27 -- Measuring less than 106.38 decitex but not less than 83.33 decitex (exceeding 94 metric number but not exceeding 120 metric number) 50% .. 5205.28 -- Measuring less than 83.33 decitex (exceeding 120 metric number) 50% .. ; (ii) for subheading No. 5205.45 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 5205.46 -- Measuring per single yarn less than 125 decitex but not less than 106.38 decitex (exceeding 80 metric number but not exceeding 94 metric number per single yarn) 50% .. 5205.47 -- Measuring per single yarn less than 106.38 decitex but not less than 83.33 decitex (exceeding 94 metric number but not exceeding 120 metric number per single yarn) 50% .. 5205.48 -- Measuring per single yarn less than 83.33 decitex (exceeding 120 metric number per single yarn) 50% .. ; (29) in Chapter 54, in heading No.54.07, for subheading No.5407.60 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: -Other woven fabrics, containing 85% or more by weight of polyester filaments: 5407.61 -- Containing 85% or more by weight of non-textured polyester filaments 50% .. 5407.69 -- Other 50% .. ; (30) in Chapter 56, for heading No.56.03 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 56.03 NON-WOVENS, WHETHER OR NOT IMPREGNATED, COATED, COVERED OR LAMINATED - Of man-made filaments: 5603.11 -- Weighing not more than 25 g/m2 50% .. 5603.12 -- Weighing more than 25 g/m2 but not more than 70 g/m2 50% .. 5603.13 -- Weighing more than 70 g/m2 but not more than 150 g/m2 50% .. 5603.14 -- Weighing more than 150 g/m2 50% .. - Other: 5603.91 -- Weighing not more than 25 g/m2 50% .. 5603.92 -- Weighing more than 25 g/m2 but not more than 70 g/m2 50% .. 5603.93 -- Weighing more than 70 g/m2 but not more than 150g/m2 50% .. 5603.94 -- Weighing more than 150 g/m2 50% .. ; (31) in Chapter 63, in heading No. 63.05, after subheading No.6305.20 and the entries relating thereto, for the words - Of man-made textile materials: and subheading Nos. 6305.31 and 6305.39 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: -Of man-made terxtile materials: 6305.32 -- Flexible intermiediate bulk containers 50% .. 6305.33 -- Other, of polyethylene or poly-propylene strips or the like 50% .. 6305.39 -- Other 50% .. ; (32) in Chapter 64,- (i) in heading No. 64.02, for subheading No.6402.11 and the entries relating thereto, the following subheading and entries shall be substituted, namely: 6402.12 -- Ski-boots, cross-country ski footwear and snowboard boots 50% .. ; (ii) in heading No. 64.03, for subheading No.6403.11 and the entries relating thereto, the following subheading and entries shall be substituted, namely: 6403.12 -- Ski-boots, cross-country ski footwear and snowboard boots 50% .. ; (33) in heading No.69.09, after subheading No.6909.11 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 6909.12 -- Articles having a hardness equivalent to 9 or more on the Mohs scale 50% .. ; (34) in heading No.70.03, for subheading No.7003.11 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 7003.12 Coloured throughout the mass (body-tinted), opacified, flashed or having an absorbent, reflecting or non-reflecting layer 50% .. ; (35) in heading No.70.04, for subheading No.7004.10 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 7004.20 - Glass, coloured throughout the mass (body tinted), opacified, flashed or having an absorbent, reflecting or non-reflecting layer 50% .. ; (36) in heading No.70.10, for subheading No.7010.90 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 7010.20 - Stoppers, lids and other closures - Other, of a capacity: 7010.91 -- Exceeding 11 50% .. 7010.92 -- Exceeding 0.151 but Exceeding 11 50% .. 7010.93 -- Exceeding 0.331 but not exceeding 0.33 50% .. 7010.94 -- Not exceeding 0.151 50% .. ; (37) for heading No.70.19, subheading Nos. 7019.10, 7019.20, 7019.31, 7019.32, 7019.39 and 7019.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 70.19 GLASS FIBRES (INCLUDING GLASSWOOL) AND ARTICLES THEREOF (FOR EXAMPLE, YARN, WOVEN FABRICS) - Slivers, rovings, yarn and chopped strands: 7019.11 Chopped strands, of a length of not more than 50 mm 50% .. 7019.12 -- Rovings 50% .. 7019.19 -- Other 50% .. - Thin sheets (voiles), webs, mats ; mattresses, boards and similar non-woven products: 7019.31 -- Mats 50% .. 7019.32 -- Thin sheets (voiles) 50% .. 7019.39 -- Other 50% .. 7019.40 - Woven fabrics of rovings 50% .. - Other woven fabrics: 7019.51 -- Of a width not exceeding 30 cm 50% .. 7019.52 -- Of a width exceeding 30 cm, plain weave, weighing less than 250 g/m2, of filaments measuring per single yarn not more than 136 tex 50% .. 7019.59 -- Other 50% .. 7019.90 - Other 50% .. ; (38) in Chapter 72,- (i) in heading No. 72.01, for subheading Nos.7201.30 and 7201.40 and the entries relating thereto, the following subheading and entries shall be substituted, namely: 7201.50 Alloy pig iron; spiegeleisen 50% .. ; (ii) for heading No.72.08, subheading Nos. 7208.11, 7208.12, 7208.13, 7208.14, 7208.21, 7208.22, 7208.23, 7208.24, 7208.31, 7208.32, 7208.33, 7208.34, 7208.35, 7208.41, 7208.42, 7208.43, 7208.44, 7208.45 and 7208.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 72.08 FLAT ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, HOT-ROLLED NOT CLAD, PLATED OR COATED 7208.10 - In coils, not further worked than hot-rolled, with patterns in relief 50% .. - Other, in coils, not further worked than hot-rolled, pickled: 7208.25 -- Of a thickness of 4.75 mm or more 50% .. 7208.26 -- Of a thickness of 3 mm or more but less than 4.75 mm 50% .. 7208.27 -- Of a thickness of less than 3 mm 50% .. - Other, in coils, not further worked than hot-rolled: 7208.36 -- Of a thickness exceeding 10 mm 50% .. 7208.37 -- Of a thickness of 4.75 mm or more but not exceeding 10 mm 50% .. 7208.38 -- Of a thickness of 3 mm or more but less than 4.75 mm 50% .. 7208.39 -- Of a thickness of less than 3 mm 50% .. 7208.40 - Not in coils, not further worked than hot-rolled, with patterns in relief 50% .. - Other, not in coils, not further worked than hot-rolled: 7208.51 -- Of a thickness exceeding 10 mm 50% .. 7208.52 -- Of a thickness of 4.75 mm or more but not exceeding 100 mm 50% .. 7208.53 -- Of a thickness of 3 mm or more but less than 4.75 mm 50% .. 7208.54 -- Of a thickness of less than 3 mm 50% .. 7208.90 - Other 50% .. ; (iii) for heading No.72.09, subheading Nos. 7209.11, 7209.12, 7209.13, 7209.14, 7209.21, 7209.22, 7209.23, 7209.24, 7209.31, 7209.32, 7209.33, 7209.34, 7209.41, 7209.42, 7209.43, 7209.44 and 7209.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 72.09 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COLD-ROLLED (COLD-REDUCED), NOT CLAD, PLATED OR COATED - In coils, not further worked than cold-rolled (cold-reduced): 7209.15 -- Of a thickness of 3 mm or more 50% .. 7209.16 -- Of a thickness exceeding 1 mm but less than 3 mm 50% .. 7209.17 -- Of a thickness of 0.5 mm or more 50% but not exceeding 1 mm 50% .. 7209.18 -- Of a thickness of less than 0.5 mm 50% .. - Not in coils, not further worked than cold-rolled (cold-reduced): 7209.25 -- Of a thickness of 3 mm or more 50% .. 7209.26 -- Of a thickness exceeding 1 mm but less than 3 mm 50% .. 7209.27 -- Of a thickness of 0.5 mm or more but not exceeding 1 mm 50% .. 7209.28 -- Of a thickness of less than 0.5 mm 50% .. 7209.90 - Other 50% .. ; (iv) for heading No.72.10, subheading Nos.7210.11, 7210.12, 7210.20, 7210.31, 7210.39, 7210.41, 7210.49, 7210.50, 7210.60, 7210.70 and 7210.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 72.10 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED - Plated or coated with tin: 7210.11 -- Of a thickness of 0.5 mm or more 50% .. 7210.12 -- Of a thickness of less than 0.5 mm 50% .. 7210.20 - Plated or coated with lead, including terneplate 50% .. 7210.30 - Eelectrolytically plated or coated 50% with zinc 50% .. - Otherwise plated or coated with zinc: 7210.41 -- Corrugated 50% .. 7210.49 -- Other 50% .. 7210.50 -- Plated or coated with chromium oxides or with chromium and chromium oxides 50% .. - Plated or coated with aluminium: 7210.61 -- Plated or coated with aluminium zinc alloys 50% .. 7210.69 -- Other 50% .. 7210.70 - Painted, varnished or coated with plastics 50% .. 7210.90 - Other 50% .. ; (v) for heading No.72.11, subheading Nos. 7211.11, 7211.12, 7211.19, 7211.21, 7211.22, 7211.29, 7211.30, 7211.41, 7211.49 and 7211.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 72.11 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT CLAD, PLATED OR COATED - Not further worked than hot-rolled: 7211.13 -- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief 50% .. 7211.14 -- Other, of a thickness of 4.75 mm or more 50% .. 7211.19 -- Other 50% .. - Not further worked than cold-rolled (cold-reduced): 7211.23 -- Containing by weight less than 0.25% of carbon 50% .. 7211.29 -- Other 50% .. 7211.90 - Other 50% .. ; (vi) for heading No.72.12, sub-heading Nos. 7212.10, 7212.21, 7212.29, 7212.30, 7212.40, 7212.50 and 7212.60 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 72.12 FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED 7212.10 - Plated or coated with tin 50% .. 7212.20 - Electrolytically plated or coated with zinc 50% .. 7212.30 - Otherwise plated or coated with zinc 50% .. 7212.40 - Painted, varnished or coated with plastics 50% .. 7212.50 - Otherwise plated or coated 50% .. 7212.60 - Clad 50% .. ; (vii) for heading No.72.13, subheading Nos. 7213.10, 7213.20, 7213.31, 7213.39, 7213.41, 7213.49 and 7213.50 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 72.13 BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL 7213.10 - Containing indentations, ribs, grooves or other deformations produced during the rolling process 50% .. 7213.20 - Other, of free-cutting steel 50% .. - Other 7213.91 -- Of circular cross-section measuring less than 14 mm in diameter 50% .. 7213.99 -- Other 50% .. ; (viii) in heading No. 72.14, for subheading Nos. 7214.10, 7214.20, 7214.30, 7214.40, 7214.50 and 7214.60 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 7214.10 - Forged 50% .. 7214.20 - Containing identations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling 50% .. 7214.30 - Other, of free-cutting steel 50% .. - Other: 7214.91 -- Of rectangular (other than square) cross-section 50% .. 7214.99 -- Other 50% .. ; (ix) for heading No. 72.15, subheading Nos. 7215.10, 7215.20, 7215.30, 7215.40 and 7215.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 72.15 OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL 7215.10 - - Of free-cutting steel, not further worked than cold-formed or cold-finished 50% .. 7215.50 - Other, not further worked than cold-formed or cold-finished 50% .. 7215.90 - Other 50% .. ; (x) in heading No. 72.16,- (a) for subheading No. 7216.60 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Angles, shapes and sections, not further worked than cold-formed or cold-finished: 7216.61 -- Obtained from flat-rolled products 50% .. 7216.69 -- Other 50% .. ; (b) for subheading No. 7216.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other: 7216.91 -- Cold-formed or cold finished from flat-rolled products 50% .. 7216.99 -- Other 50% .. ; (xi) for heading No. 72.17, subheading Nos. 7217.11, 7217.12, 7217.13, 7217.19, 7217.21, 7217.22, 7217.23, 7217.29, 7217.31, 7217.32, 7217.33 and 7217.39, and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 72.17 WIRED OF IRON OR NON-ALLOY STEEL 7217.10 - Not plated or coated, whether or not polished 50% .. 7217.20 - Plated or coated with zinc 50% .. 7217.30 - Plated or coated with other base metals 50% .. 7217.90 - Other 50% .. ; (xii) in heading No. 72.18, for subheading No. 7218.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- Other: 7218.91 -- Of rectangular (other than square) Cross-section 50% .. 7218.99 -- Other 50% .. ; (xiii) in heading No. 72.22, for subheading No. 7222.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: 7222.11 -- Of circular cross-section 50% .. 7222.19 -- Other 50% .. ; (xiv) in heading No. 72.25,- (a) for subheading No. 7225.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: - Of silicon-electrical steel: 7225.11 -- Grain-oriented 50% .. 7225.19 -- Other 50% .. ; (b) for subheading No. 7225.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other: 7225.91 -- Electrolytically plated or coated with zinc 50% .. 7225.92 -- Otherwise plated or coated with zinc 50% .. 7225.99 -- Other 50% .. ; (xv) in heading No. 72.26,- (a) for subheading No. 7226.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -Of silicon-electrical steel: 7226.11 - Grain-oriented 50% .. 7226.19 - Other 50% .. ; (b) after subheading No. 7226.92 and the entries relating thereto, the following subheadings and entries shall be inserted, namely:- 7226.93 - Electrolytically plated or coated with zinc 50% .. 7226.94 - Otherwise plated or coated with zinc 50% .. ; (39) in Chapter 73,- (i) in heading No. 73.04 for subheading No. 7304.20 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Casing, tubing and drill pipe, of a kind sused in drilling for oil or gas: 7304.21 -- Drill pipe 50% .. 7304.29 -- Other 50% .. ; (ii) for heading No. 73.14, sub-heading Nos. 7314.11, 7314.19, 7314.20, 7314.30, 7314.41, 7314.42, 7314.49, and 7314.50 and the entries relating thereto, the following heading, sub-headings and entries shall be substituted, namely:- 73.14 CLOTH (INCLUDING ENDLESS BANDS), GRILL, NETTING AND FENCING, OF IRON OR STEEL WIRE EXPANDED METAL OF IRON OR STEEL - Woven cloth: 7314.12 -- Endless bands for machinery, of stainless steel 50% .. 7314.13 -- Other endless bands for machinery 50% .. 7314.14 -- Other woven cloth, of stainless steel 50% .. 7314.19 -- Other 50% .. 7314.20 - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm or more 50% .. - Other grill, netting and fencing, welded at the intersection: 7314.31 -- Plated or coated with zinc 50% .. 7314.39 -- Other 50% .. Other cloth, grill, netting and fencing: 7314.41 -- Plated or coated with zinc 50% .. 7314.42 -- Coated with plastics 50% .. 7314.49 -- Other 50% .. 7314.50 -- Expanded metal 50% .. ; (40) in Chapter 74,- (i) in heading No. 74.14, for sub-heading No. 7414.10 and the entries relating thereto, the following subheading and entries shall be substituted, namely: 7414.20 - Cloth 50% .. ; (ii) in heading No. 74.18, for sub-heading No. 7418.10 and the entries relating thereto, the following sub-headings and entries shall be substituted, namely: - Table, kitchen or other household articles and parts thereof; pot scorers and scouring or polishing pads, gloves and the like: 7418.11 -- Pot scourers and secouring or polishing pads, gloves and the like 50% .. 7418.19 -- Other 50% .. ; (41) in Chapter 75, for heading No. 75.08 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 75.08 - OTHER ARTICLES OF NICKEL 7508.10 - Cloth, grill and netting of nicket wire 30% .. 7508.90 - Other 30% .. ; (42) in Chapter 76,- (i) in heading No. 76.15, for subheading No. 7615.10 and the entries relating thereto, the following subheading and entries shall be substituted, namely: Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: 7615.11 -- Pot scourers and scouring or polishing pads, gloves and the like 40% .. 7615.19 -- Other 40% .. ; (ii) in heading No 76.16, for subheading No. 7616.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other: 7616.91 Cloth, grill, netting and fencing, of aluminium wire 40% .. 7616.99 - Other 40% .. ; (43) in Chapter 79, for heading No. 79.07, subheading Nos.7907.10 and 7907.90 and the entries relating thereto, the following heading and entries shall be substituted, namely:- 79.07 7907.00 - OTHER ARTICLES OF ZINC 50% .. ; (44) in Chapter 80, for heading No. 80.05, subheading Nos. 8005.10 and 8005.20 and the entries relating thereto, the following heading, and entries shall be substituted, namely:- 80.05 8005.00 TIN FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS), OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2MM; TIN POWDERS AND FLAKES 50% .. ; (45) in Chapter 82,- (i) in heading No. 82.2, for subheading No.8202.32 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 8202.39 -- Other, including parts 30% .. ; (ii) in heading No. 82.07, for subheading Nos. 8207.11and 8207.12 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: 8207.13 -- With working part of cermets 30% .. 8207.19 -- Other, including parts 30% .. ; (iii) in heading No. 82.11, after subheading No. 8211.94 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: 8211.95 - Handles of base metal 30% .. ; (46) in Chapter 84,- (i) for heading No. 84.06, subheading Nos. 8406.11, 8406.19 and 8406.90 and the entries relating thereto, the following headings, subheadings and entries shall be substituted, namely:- 84.06 STEAM TURBINES AND OTHER VAPOUR TURBINES 8406.10 - Turbines for marine propulsion 50% .. - Other turbines: 8406.81 -- Of an output exceeding 40 MW 50% .. 8406.82 -- Of an output exceeding 40 MW 50% .. 8406.90 - Parts 50% .. ; (ii) in heading No. 84.15, after subheading No. 8415.10 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 8415.20 - Of a kind used for persons, in motor vehicles 50% .. ; (iii) in heading No. 84.43, for subheading No. 8443.50 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other printing machinery: 8443.51 -- Ink-jet printing machines 50% .. 8443.59 -- Other 50% .. ; (iv) in heading No. 84.56, for subheading No. 8456.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other: 8456.91 -- For dry-etching patterns on semi-conductor materials 50% .. 8456.99 -- Other 50% .. ; (v) for heading No. 84.69, subheading Nos. 8469.10, 8469.21, 8469.29, 8469.31 and 8469.39 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 84.69 TYPEWRITERS OTHER THAN PRINTERS OF HEADING NO. 84.71; WORD-PROCESSING MACHINES - Automatic typewriters and word-processing machines: 8469.11 -- Word-processing machines. 50% .. 8469.12 -- Automatic typewriters 50% .. 8469.20 - Other typewriters, electric 50% .. 8469.30 - Other typewriters, nonelectric 50% .. ; (vi) for heading No. 84.71, subheading Nos. 8471.10, 8471.20, 8471.91, 8471.92, 8471.93 and 8471.99 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 84.71 AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ON TO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED. 8471.10 - Analogue or hybrid automatic data processing machines Portable digital automatic data 50% .. 8471.30 - Processing machines, weighing not more than 10Kg, consisting of at least a central processing unit, a keyboard and a display 50% .. - Other digital automatic data processing machines: 8471.41 Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined 50% .. 8471.49 -- Other, presented in the form of systems 50% .. 8471.50 - Digital processing units other than those of subheadings 8471.41and 8471.49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units 50% .. 8471.60 - Input or output units, whether or not containing storage units in the same housing 50% .. 8471.70 - Storage units 50% .. 8471.80 - Other units of automatic data processing machines 50% .. 8471.90 - Other 50% .. ; (vii) in heading No. 84.73, after subheading No. 8473.40 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 8473.50 Parts and accessories equally suitable for use with machines of two or more of the heading Nos. 84.69 to 84.72 50% .. ; (viii) in heading No. 84.75, for subheading No. 8475.20 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -- Machines for manufacturing or hot working glass or glassware: 8475.21 -- Machines for making optical fibres and preforms thereof 50% .. 8475.29 -- Other 50% .. ; (ix) for heading No. 84.76, subheading Nos. 8476.11, 8476.19 and 8476.90 and the entries entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 84.76 AUTOMATIC GOODS-VENDING MACHINES (FOR EXAMPLE; POSTAGE STAMPS, CIGARETTE; FOOD OR BEVERAGE MACHINES) INCLUDING MONEY CHANGING. MACHINES - Automatic beverage-vending machines: 8476.21 -- Incorporating heating or refrigerating devices 50% .. 8476.29 -- Other 50% .. - Other machines: 8476.81 -- Incorporating heating or refrigerating devices 50% .. 8476.89 -- Other 50% .. 8476.90 - Parts 50% .. ; (x) in heading No. 84.79, after subheading No. 8479.40 and the entries relating thereto, the following subheadings and entries shall be inserted, namely:- 8479.50 - Industrial robots, not elsewhere specified or included 50% .. 8479.60 - Evaporative air coolers 50% .. ; (xi) after subheading No. 8484.10 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 8484.20 - Mechanical seals 50% .. ; (47) in Chapter 85,- (i) in heading No. 85.02, for subheading No. 8502.30 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- - Other generating sets: 8502.31 -- Wind-powered 50% .. 8502:39 -- Other 50% .. ; (ii) for heading No. 85.06, subheading Nos. 8506.11, 8506.12, 8506.13, 8506.19, 8506.20 and 8506.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 85.06 PRIMARY CELLS AND PRIMARY BATTERIES 8506.10 - Manganese dioxide 50% .. 8506.30 - Mercuric oxide 50% .. 8506.40 - Silver oxide 50% .. 8506.50 - Lithium 50% .. 8506.60 - Air-zinc 50% .. 8506.80 - Other 50% .. 8506.90 - Parts 50% .. ; (iii) in heading No. 85.10, after subheading No. 8510.20 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 8510.30 - Hair-removing appliances 50% .. ; (iv) for heading No. 85.17, subheading Nos. 8517.10, 8517.20, 8517.30, 8517.40, 8517.81, 8517.82 and 8517.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 85.17 ELECTRICAL APPARATUS FOR LINE TELEPHONY OR LINE TELEGRAPHY, INCLUDING LINE TELEPHONE SETS WITH CORDLESS HANDSETS AND TELECOMMUNICATION APPARATUS FOR CARRIER-CURRENT LINE SYSTEMS OR FOR DIGITAL LINE SYSTEMS; VIDEOPHONES - Telephone sets; videophones: 8517.11 -- Line telephone sets with cordless handsets 50% .. 8517.19 -- Other 50% .. - Facsimile machines and teleprinters: 8517.21 -- Fascimile machines 50% .. 8517.22 -- Teleprinters 50% .. 8517.30 - Telephonic or telegraphic switching apparatus 50% .. 8517.50 - Other apparatus, for carrier-current line systems or for digital line systems 50% .. 8517.80 - Other apparatus 50% .. 8517.90 - Parts 50% .. ; (v) in heading No. 85.19, for subheading No. 8519.91 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: 8519.92 -- Pocket-size cassette-players 50% .. 8519.93 -- Other, cassette-type 50% .. ; (vi) in heading No. 85.20, for subheading No. 8520.31 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 8520.32 -- Digital audio type. 50% .. 8520.33 -- Other, cassette-type 50% .. ; (vii) in heading No. 85.23, after subheading No. 8523.20 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 8523.30 - Cards incorporating a magnetic stripe 50% .. ; (viii) in heading No. 85.24, after subheading No. 8524.10 and the entries relating thereto, for the words -Magnetic tapes: , subheading Nos. 8524.21, 8524.22, 8524.23 and 8524.90 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: - Discs for laser reading systems: 8524.31 -- For reproducing phenomena other than sound or image 50% .. 8524.32 -- For reproducing sound only 50% .. 8524.39 -- Other 50% .. 8524.40 -- Magnetic tapes for reproducing phenomena other than sound or image 50% .. - Other magnetic tapes: 8524.51 -- Of a width not exceeding 4 mm 50% .. 8524.52 -- Of a width exceeding 4 mm but not exceeding 6.5 mm 50% .. 8524.53 -- Of a width exceeding 6.5 mm 50% .. 8524.60 - Cards incorporating a magnetic stripe 50% .. - Other: 8524.91 -- For reproducing phenomena other than sound or image 50% .. 8524.99 -- Other 50% .. ; (ix) in heading No. 85.25, after subheading No. 8525.30 and the entries relating thereto, the following subheading and entries shall be inserted, namely: 8525.40 - Still image video cameras and other video camera recorders 50% .. ; (x) in heading No.85. 27, for subheading No. 8527.11 and the entries relating thereto, the following subheadings and entries shall be substituted, namely: 8527.12 -- Pocket-size radio cassette-players 50% .. 8527.13 -- Other apparatus combined with sound recording or reproducing apparatus 50% .. ; (xi) for heading No. 85.28, subheading Nos. 8528.10 and 8528.20 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 85.28 RECEPTION APPARATUS FOR TELEVISION, WHETHER OR NOT INCORPORATING RADIOBROAD CAST RECEIVERS OR SOUND OR VIDEO RECORDING OR REPRODUCING APPARATUS; VIDEO MONITORS AND VIDEO PROJECTORS -- Reception apparatus for television, whether or not incorporating radiobroadcast receivers or sound or video recording or reproducing apparatus: 8528.12 -- Colour 50% .. 8528.13 -- Black and white or other monochrome 50% .. Video monitors: 8528.21 -- Colour 50% .. 8528.22 -- Black and white or other monochrome 50% .. 8528.30 -- Video projectors 50% .. ; (xii) in heading No. 85.39, (a) after subheading No.8539.31 and the entries relating thereto, the following subheading and entries shall be inserted, namely:- 8539.32 -- Mercury or sodium vapour lamps; metal halide lamps 50% .. ; (b) for subheading No.8539.40 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- Ultra-violet or infra-red lamps; arclamps: 8539.41 -- Arc-lamps 50% .. 8539.49 -- Other 50% .. ; (xiii) for heading No.85.40, subheading Nos. 8540.11, 8540.12, 8540.20, 8540.30, 8540.41, 8540.42, 8540.49, 8540.81, 8540.89, 8540.91 and 8540.99 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 85.40 THERMIONIC, COLD CATHODE OR PHOTO CATHODE VALVES AND TUBES (FOR EXAMPLE, VACUUM OR VAPOUR OR GAS FILLED VALVES AND TUBES, MERCURY ARC RECTIFYING VALVES AND TUBES, CATHODE- RAY TUBES, TELEVISION CAMERA TUBES) Cathode-ray television picture tubes, including video monitor cathode ray tubes: 8540.11 -- Colour 50% .. 8540.12 -- Black and white or other mono-chrome 50% .. 8540.20 -- Television camera tubes; image converters and intensifiers; other photocathode tubes. 50% .. 8540.40 - Data/graphic display tubes, colour, with a phosphor dot screen pitch smaller than 0.4 mm 50% .. 8540.50 - Data/graphic display tubes, black and white or other monochrome 50% .. 8540.60 - Other cathode-ray tubes 50% .. - Microwave tubes (for example, magnetrons, klystrons, travellig wave tubes, carcinotrons), excluding grid controlled tubes: 8540.71 -- Magnetrons 50% .. 8540.72 -- Klystrons 50% .. 8540.79 -- Other 50% .. - Other valves and tubes: 8540.81 -- Receiver or amplifier valves and tubes 50% .. 8540.89 -- Other 50% .. - Parts: 8540.91 -- Of cathode-ray tubes 50% .. 8540.99 -- Other 50% .. ; (xiv) for heading No.85,42, subheading Nos. 8542.11, 8542.19, 8542.20, 8542.80 and 8542.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 85.42 ELECTRONIC INTEGRATED CIRCUITS AND MICRO-ASSEMBLIES - monolithic digital integrated circuits: 8542.12 -- Cards incorporating an electronic integrated circuit ( smart cards) 50% .. 8542.13 -- Metal oxide semiconductors (MOS technology) 50% .. 8542.14 -- Circuits obtained by bipolar technology 50% .. 8542.19 -- Other, including circuits obtained by a combination of bipolar and MOS technologies (BIMOS technology) 50% .. 8542.30 - Other monolithic integrated circuits 50% .. 8542.40 - Hybrid integrated circuits 50% .. 8542.50 - Electronic microassemblies 50% .. 8542.90 - Parts 50% .. (xv) for heading No. 85.43, subheading Nos. 8543.10, 8543.20, 8543.30, 8543.80 and 8543.90 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely: 85.43 ELECTRICAL MACHINES AND APPARATUS HAVING INDIVIDUAL FUNCTIONS, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER - Particle accelerators: 8543.11 -- Ion implanters for doping semi-conductor materials 50% .. 8543.19 -- Other 50% .. 8543.20 -- Signal generators 50% .. 8543.30 -- Machines and apparatus or electroplating, electrolysis or electophoresis 50% .. 8543.40 - Electric fence energisers 50% .. - Other machines and apparatus: 8543.81 -- Proximity cards and tags 50% .. 8543.89 -- Other 50% .. 8543.90 - Parts 50% .. ; (xvi) for heading No.85.48 and the entries relating thereto, the following heading, subheadings and entries shall be substituted, namely:- 85.48 WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY BATTERIES AND ELECTRIC ACCUMULATORS; SPENT PRI- MARY CELLS, SPENT PRIMARY BATTERIES AND SPENT ELECTRIC ACCUMULATORS; ELECTRICAL PARTS OF MACHINERY OR APPARATUS, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER 8548.10 - Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators 50% .. 8548.90 - Other 50% .. ; (48) in Chapter 88, in heading No. 88.02, for subheading No. 8802.50 and the entries relating thereto, the following subheading and entries shall be substituted, namely:- 8802.60 Spacecraft (including satellites) and suborbital and spacecraft launch vehicles 50% .. ; (49) in Chapter 90,- (i) in heading No. 90.07, after subheading No.9007.19 and the entries relating thereto, for the word - Projectors: , subheading Nos.9007.21 and 9007.29 and the entries relating thereto, the following entry shall be substituted, namely:- 9007.20 - Projectors 50% .. ; (ii) in heading No. 90.10, for subheading Nos. 9010.20 and 9010.30 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -Apparatus for the projection or drawing of circuit patterns on sensitised semiconductor materials: 9010.41 -- Direct write-on-water apparatus 50% .. 9010.42 -- Step and repeat aligners 50% .. 9010.49 -- Other 50% .. 9010.50 - Other apparatus and equipment for photographic (including cinematographic) laboratories; negatoscopes 50% .. 9010.60 - Projection screens 50% .. ; (iii) in heading No. 90.18, after subheading No. 9018.11 and the entries relating thereto, the following subheadings and entries shall be inserted, namely: 9018.12 -- Ultrasonic scanning apparatus 40% .. 9018.13 -- Magnetic resonance imaging apparatus 40% .. 9018.14 -- Scintigraphic apparatus 40% .. ; (iv) in heading No. 90.22, for subheading No. 9022.11 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- 9022.12 -- Computed tomography apparatus 40% .. 9022.13 -- Other, for dental uses 40% .. 9022.14 -- Other, for medical surgical or veterinary uses 40% .. ; (v) in heading No. 90.30, after subheading No. 9030.40 and the entries relating thereto, for the words -Other instruments and apparatus , subheading Nos. 9030.81 and 9030.89 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -Other instruments and apparatus: 9030.82 -- For measuring or checking semi-conductor wafers or devices 50% .. 9030.83 -- Other, with a recording device 50% .. 9030.89 -- Other 50% .. ; (vi) in heading No. 90.31, for subheading No. 9031.40 and the entries relating thereto, the following subheadings and entries shall be substituted, namely:- -Other optical instruments and appliances: 9031.41 -- For inspecting semiconductor wafers or devices or for inspecting photo-masks or reticies used in manufacturing-semiconductor devices 50% .. 9031.49 -- Other 50% .. ;