SION - HB Vol.2 Amended - DGFT - 03 (RE-99)/1997-2002

SION - HB Vol.2 Amended PUBLIC NOTICE NO. 3(RE-99)/1997-2002 Dated. 5/4/1999 Attention is invited to Paragraph 7.8 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002 as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11 of the Export Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2 - 1997-2002, as amended. 3. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 4. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2181, the new entries from Sl.No.A-2182 to A-2218 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1400, the new entries from Sl.No.C-1401 to C-1408 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No.E-72, the new entry as Sl.No.E-73 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H-400, the new entries from Sl.No.H-401 to H-406 shall be added as per Annexure "E" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J-303, the new entries from Sl.No.J-304 to J-305 shall be added as per Annexure "F" to this Public Notice. 5. This issues in Public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE Copy to all concerned; By orders etc., (ASHUTOSH MISHRA) Dy. Director General of Foreign Trade Issued from File No.01/83/44/19/AM99/DES-IV Annexure "A" to the Public Notice No.3 Dated 5.4.1999. AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) 1. 3 General Policy for Packing Material Note (4) After the words "blowing grade," appearing in this note, the words "Tape Grade" shall be added. 2. 6 Chemicals Allied Products Sl.No.A2 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2 1,(4-Hydroxy 3- Hydroxy Methyl Phenyl) 2-(N-Terbutyl-N-Benzyl Amino) Ethanol (Drug Intermediate of Salbutamol Sulphate) 1 kg 1. Parahydroxy Acetophorone 1.760 kg 2. Tertiary Butylamine 0.746 kg 3. Sodium Borohydride 0.365 kg 4. Acetic Anhydride 2.060 kg 5. Methylene Chloride 4.080 kg 6. Chloroform 3.070 kg 7. Methyl Isobutyl Ketone 3.240 kg 3. 9 Chemicals Allied Products Sl.No.A27 (As amended vide Public Notice No.52 dated 5.11.98) The description of the export product shall be amended to read as under:- "4,4 Diamino Diphenyl Sulphone BP/Dapsone BP". 4. 12 Chemicals Allied Products Sl.No.A46 The norm covered by this entry shall be deleted. 5. 19 Chemicals Allied Products Sl.No.A80 The description of import item No.1 with quantity shall be amended to 1. Erythromycin Thiocyanate OR 3.10 kg activity 1. Erythromycin Base 2.72 kg activity" (1) (2) (3) (4) 6. 26 Chemicals Allied Products Sl.No.A123 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A123 Chloramphenicol Stearate 1 kg 1. L-Base OR 0.80 kg 1. Chloramphenicol 1.12 kg 2. Succinic Anhydride 0.35 kg 7. 49 Chemicals Allied Products Sl.No.A276 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A276 Ketorolac Tromethamine 1 kg 1. Pyrrole 1.25 kg 2. Isopropenyl Acetate 1.02 kg 3. Tromethamine 0.40 kg 4. Dimethyl Sulphoxide 2.80 kg 5. 1,1 Cyclopropane Dicarboxylic Acid 1.97 kg 8. 49 Chemicals Allied Products Sl.No.A282 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A282 Magnesium Glycerophosphate BPC 63 1 kg 1. Epichlorohydrine 1.16 kg 2. Methanol 3.69 Litre 3. Trisodium 3.50 kg Sl. No. Page No. Reference Amendments/Corrections (1) (2) (3) (4) 9. 51 Chemicals Allied Products Sl.No.A290 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A290 Metformin HCL BP 1 kg 1. Dicyanodimide 0.935 kg 2. Dimethyl Formamide 1.140 kg 10. 63 Chemicals Allied Products Sl.No.A391 The description of import item No.1 with quantity shall be amended to read as under:- "1. Erythromycin Thiocyanate OR 2.32 kg activity 1. Erythromycin Base 2.03 kg activity" 11. 68 Chemicals Allied Products Sl.No.A428 The description of the export product shall be amended to read to read as under: "Tolnaftate BP/USP" 12. 72 Chemicals Allied Products Sl.No.A467 The description of the export product shall be amended to read as under:- "4,4 Diamino Sulfanilide (100% Basis) 13. 97 Chemicals Allied Products Sl.No.A661 The quantity of import item No.2 i.e. Acetic Anhydride shall be amended to read as "1.065 kg". 14. 136 Chemicals Allied Products Sl.No.A985 The description of the import item 2 alongwith quantity shall be amended to read as under:- "Hydroxyl Amine Sulfate". 0.242 kgs 15. 181 182 Chemicals Allied Products Sl.No.A1486 The description of the export product shall be amended to read as "Sodium Lauryl Sulphate 90%". (1) (2) (3) (4) 16. 182 Chemicals Allied Products Sl.No.A1491 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A1491 Speciality Textile Lubricating Oil (STLO) 1 kg 1. Low Molucular weight Silanol 1.065 kg 2. Amino Ethyl Amino Propyl Methyl-Di- Methoxy Silane 0.04 kg 17. 191 Chemicals Allied Products Sl.No.A1556 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A1556 Printed Cartons made of Paper Board 1 kg 1. One side Coated Paper Board (Including White) of GSM 180-250 1.10 kg (1) (2) (3) (4) 18. 210 211 Chemicals Allied Products Sl.No.A1674 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A1674 Rubber Stopper/Rubber Disc of various sizes, Colours Shapes/Designs, made of Butyl/ Bromobutyl /Chlorobutyl/ Chloroprene Rubber. 1 kg 1. Butyl/Bromobutyl/Chlorobutyl/Chloroprene Rubber 0.79 kg 2. Misc.chemicals: a)Low Molecular Poyethylene 0.015 kg 2. b)Microcrystallin Wax 0.015 kg 2. c)Tetra Methyl Thiurum Disulphide (TMTD) 0.007 kg 2. d)Glycol 0.015 kg 3. Zinc Oxide/Magnesium Oxide 0.023 kg 4. Titanium Dioxide 0.007 kg (1) (2) (3) (4) 19. 216 Chemicals Allied Products Sl.No.A1688 The description of the import item 1 shall be amended to read as under:- "Relevant Synthetic Rubber / EPDM" 20. 225 Chemicals Allied Products Sl.No.A1723 The description of the import item 1 shall be amended to read as under:- "Rayon/Polyester/Nylon/Kevlar Cord/Raw Cotton/Warp Sheet (dipped or undipped)". 21. 230 231 Chemicals Allied Products Sl.No.A1742 The description of the import item 8 alongwith quantity shall be amended to read as under:- "8. Clove Oil - 0.005 kg". 22. 240 Chemicals Allied Products Sl.No.A1782 The quantity of the export product shall be corrected to read as "1000 Meters". 23. 248 Chemicals Allied Products Sl.No.A1833 The description of the import item 1(a) shall be amended to read as "Steel Blades". 24. 250 Chemicals Allied Products Sl.No.A1841 The import item 1 against this entry shall be deleted. 25. 254 Chemicals Allied Products Sl.No.A1873 The description of the import item 1 shall be amended to read as under:- "Polymer VP 75 Q (Copolymer of Styrene and N-Butyle Methocrylate)". 26. 266 Chemicals Allied Products Sl.No.A1976 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A1976 Atipa Di Chloride 1 kg 1. Isophthalic Acid 0.85 kg 2. Iodine 1.31 kg 3. Iso Propyl Alcohol 0.36 kg 4. Thionyl Chloride 1.13 kg 5. Activated Carbon 1.10 kg 27. 269 Chemicals Allied Products Sl.No.A2003" The description of the export product shall be amended to read as under:- 5-Sodio Sulpho Dimethyl Isophthalate/ 5 Sulfo Dimethyl Isophthalate Sodium Salt". 28. 270 Chemicals Allied Products Sl.No.A2009 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2009 Perlite Powder 1 kg 1. Perlite Ore 1.175 kg (1) (2) (3) (4) 29. 271 Chemicals Allied Products Sl.No.A2016 1. The word "(T.A.A.)" alongwith the description of the import item 2 shall be corrected to read as "(T.T.A.)". 2. In the import item 3, the following alternative item with quantity shall be added:- "OR BF3 Gas - 1.00 kg". 30. 272 Chemicals Allied Products Sl.No.A2023 After import item 12, the following items with quantity shall be added:- "13. Sodium Borohydride 0.41 kg 14. Thionyl Chloride 1.35 kg". 31. 272 Chemicals Allied Products Sl.No.A2026 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2026 Citric Acid 1 kg 1. Commercial Maize/Tapioca Starch containing 13% moisture 1.318 kg 2. Caustic Soda Lye 50% 0.150 kg 3. Antifoam Oil 0.0036 kg 4. Enzyme Dextrozyme 0.0010 kg (1) (2) (3) (4) 32. 275 Chemicals Allied Products Sl.No.A2046 The quantity of import item no. 4 shall be amended to read as "0.685 kg". 33. 278 Chemicals Allied Products Sl.No.A2069 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2069 Iopamidol Tech 1 kg 1. 2,4,6 - Tri-Iodo 5-Amino Isophtha-loyl Chloride (Atipa Chloride) OR 1.65 kg i)Isophthalic Acid 1.40 kg ii)Iodine 2.16 kg iii)Isopropyl Alcohol 0.60 kg iv)Thionyl Chloride 1.86 kg v)Activated Carbon 0.10 kg 2. 2-Amino-1,3- Propandiol (Seriniol) OR 0.45 kg i)Nitromethane 0.48 kg ii)Para Formal-dehyde 0.48 kg iii)Iso Propyl Alcohol 0.90 kg iv)Methanol 1.14 kg 3. S(-)-2-Acetoxy Propionyl Chloride 0.85 kg 4. Isopropyl Alcohol 1.27 kg 5. Methanol 1.25 kg 34. 279 Chemicals Allied Products Sl.No.A2076 The norm covered by this entry shall be substitued by the following:- (1) (2) (3) (4) (5) A2076 Gemfibrozil BP/USP 1 kg 1. 2,5 Xylenol 1.34 kg 2. 1-Bromo-3-Chloro Propane 2.17 kg 3. Isobutylronitrile 0.97 kg 4. Potassium Carbonate 1.44 kg 5. Tetrahydrofuran 4.06 kg (1) (2) (3) (4) 35. 279 Chemicals Allied Products Sl.No.A2081 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) A2081 Coloured Paper/Board with or without Print Design 1 kg 1. Relevant Coated/ Uncoated Paper/ Board 1.081 kg 2. Relevant Inorganic Pigment/Pigment preparation 0.069 kg Note: Import item 2 shall be allowed only in case the export product is with print design. 36. 282 Chemicals Allied Products Sl.No.A2139 After import item No.1, following additional item with quantity shall be added:- "2. 2-Ethyl Hexanol 0.558 Kg" (1) (2) (3) (4) 37. 426 Engineering Products Sl.No.C270 In the description of the export product, after the word "Cable", the following shall be inserted:- "/L.T. PVC Cables of various sizes". 38. 475 to 480, 495 to 496, 500 to 502 and 512 to 516 Engineering Products Sl.Nos.C458, C459, C461, C506, C511, C523 and C525 The quantity of import item "Saw/Shear Blades" against these entries shall be amended to read as "0.01 kg". 39. 495 Engineering Products Sl.No.C506 1. The quantities of import items 2(a) and 2(c) shall be amended to read as "360 kgs" and "560 kgs" respectively. 2. The description of the import item 3(ii)(c) shall be amended to read as under:- "Copper Lined Mould/ Copper Mould for Casting". 3. After import item 3(ii)(j), the following item with quantity shall be added:-"(k)Silica Texture bellow Shroud". - 0.0052 Kgs 40. 510 Engineering Products Sl.No.C517 1. The quantity of import item 1(i) shall be amended to read as "360 kgs". 2. The description of the import item 1(iii) alongwith quantity shall be amended to read as under:- "1(iii)Metallurgical Coke".- 560 Kgs 3. The description of the import item 3(c) shall be amended to read as under:- "Copper Lined Mould/ Copper Mould for Casting". 4. After import item 3(l)(x), the following item with quantity shall be added:- "(xi)Silica Texture bellow Shroud". - 0.0052 Kgs 41. 516 517 Engineering Products Sl.No.C527 1. The description of import items at Sl.Nos. 6 and 7 shall be amended to read as under:- "6. Diamond/Compax Dies or Blanks 7. Used/new Plastic Bobbins/ Spools". 2. After import item 7, the following item with quantity shall be added:- "8. Inconel Pipes/Tubes - 2 kgs" 42. 525 Engineering Products Sl.No.C593 The description of the export product shall be amended to read as under:- "Carbon Steel Submerged Arc Welded Pipes as per API Grade/ASTM Grade or equivalent OR Hot Formed Steel Bends as per API, ASTM Grade or equivalent grade Degree: 0-180 Degree." 43. 526 Engineering Products Sl.No.C599 The description of the import item 1 alongwith quantity shall be amended to read as under:- "Alloy Steel Rounds/Rods - 1.15 MT OR Alloy Steel Billets - 1.20 MT". 44. 527 Engineering Products Sl.No.C614 The description of the import item 3 shall be amended to read as under:- "Roller Bearing NUP 308 Bore 40 MM Weight 725 Gms. +/- 10% tolerance limit". 45. 531 Engineering Products Sl.No.C638 The description of import item 2 alongwith quantity shall be amended to read as under:- "2. Miscellaneous items: a)Gun Drill b)Lapping Compound c)Honing Mandrels d)Solder Paste e)CBN/Diamond Honing Stick Blank/Support Stones/Deburring Tools f)Carbide Tip End Mill g)Plain Grinding Wheels/Disc Wheels for Lap Grinding/Match/ Lap Grinding Wheels/ CBN Wheels Upto 2% of FOB value of export. 46. 532 Engineering Products Sl.No.C646 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) C646 Flexible Corrugated Stainless Steel Hose with Braidings of Stainless Steel 1 MT 1. Stainless Steel Sheet/Coils 1.25 MT/MT content in the export product. 2. Stainless Steel Wire Wire 1.10 MT/MTcontent in the export product. (1) (2) (3) (4) 47. 551 Engineering Products Sl.No.C781 The description of export product shall be amended to read as under:- "Rings, Lid and Tagger Assemblies with or without Tagger (with or without matching bottom piece) made of Tin Plate". 48. 560 Engineering Products Sl.No.C838(b) The description of the export product shall be amended to read as "Stainless Steel Wire Braid". 49. 566 Engineering Products Sl.No.C875 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) C875 Twin Type Shaving System Disposable Razor Blades-II (one twin blade fixed on a Razor Handle with a protective cap) 1 Million Disp. Razor Blades 1. CRSS Strips 885 kgs 2. High Impact Polystyrene (for top cap, seat handle) 7540 kgs 3. General Purpose Polystyrene (for protective cap) 1640 kgs 4. Aluminium Strip/Coil/Sheet (for spacer) 322 kgs 5. Polypropylene Pouch OR BOPP Film Printed or Plain Net + 1% wastage. 6. Krytox 0.6 kg 7. Grinding Wheel (Silicon Carbide and Aluminium Oxide), Slitting Wheel Upto 5% of FOB value of export (1) (2) (3) (4) 50. 570 Engineering Products Sl.No.C902 1. The description of the export product shall be amended to read as under:- "Galvanised/Perforated Alloy Steel C.A. Tubular C- Connector (Insulated) for Transmission Lines". 2. The description of the import item 1 alongwith quantity shall be amended to read as under:- "ERW Steel OR 1.26 MT HR Coil/Sheet 1.6mm to 5mm". 1.49 MT 51. 598 Engineering Products Sl.No.C1014 Import item 3 alongwith quantity shall be substituted by the following: - "3. Miscellaneous Items:- a)Grinding Wheel (with or without frame work) b)CBN/Diamond Honing Stick Blank/Support Stones/Deburring Tools c)Carbide Cutter d)Plain Grinding Wheels/CBN Wheels" Upto 3% of FOB value of export. 52. 616 Engineering Products Sl.No.C1064 1. The import item 3, shall be amended to read as under:- "3. Miscellaneous items: Gun Drill, Micro Drill, Quick Spirol Drill, Grinding Wheel (with or without frame work), Lapping Compound, Letter/ Number Inscription Punch and Honning Tools, Deep Hole Drills, Diamond Dresser/ Wires, Mounted Points/ Segments". 2. The quantity of item 3 shall be amended to read as "Upto 3% of FOB value of export." 53. 677 Engineering Products Sl.No.C1359 1. The description of the import item 1 alongwith quantity shall be amended to read as under:- "1. CRGO Silicon Electrical Steel Sheets/Coils OR 3.667 kg/KVA 1. Transformer Core Alloy Amorphous Electrical Steel 4.584 kg/KVA 2. After import item 6, the following item with quantity shall be added:- "7. CRCA Sheets 0.704 kg/KVA". 3. Below this entry, the following note shall be added: "Note: 1)CRCA Sheet to be allowed in case of complete Transformers only and not for its Active Parts." 54. 678 to 679 Engineering Products Sl.No.C1365 1. After import item 5, the following items with quantity shall be added:- "6. Aluminium Ingots 1.10 Kg/kg content in the export product. 7. Bolts Net to net." 2. Below this entry, the following note shall be added:- "Note: Item No.6 Aluminium Ingots to be allowed for Steering Assembly with Aluminium Box". 55. 691 Engineering Products Sl.Nos.C1374, C1375, C1376 and C1377 (Introduced vide Public Notice No.37 dated 10.9.98) These norms shall be corrected as per Annexure "G" to this Public Notice. 56. 691 Engineering Products Sl.No.C1387 (Introduced vide Public Notice No.63 dated 24.12.98) In the description of the export product the word "Table" shall be corrected to read as "Tablet". 57. 718 Food Products Sl.No.E25 Alongwith the existing description of the export product "/Guargum Refined Splits" shall be added. 58. 724 Handicrafts Sl.No.F8 The norms covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) F8 Handknotted/Woven/Tufted Woollen Carpets, Indo Tibetan Carpets, Hand made Wool Druggets(Durries) 1 kg 1. Raw Wool (32 Micron above) 1.35 kg 2. Cotton Yarn (10 Counts) 0.20 kg 3. Batching Oil/Oil Emulsifier 0.02 kg 4. Lissapol/Sodium Lauryl Sulphate 0.030 kg 5. Soda Ash 0.02 kg 6. Acetic Acid/Hydrozen Peroxide *0.010 kg 7. Eulan Wa/Moth Proofing Agent 0.01 kg 8. Potassium Bichromate 0.005 kg 9. Sodium Hydrosulphite/Amonium Sulphite 0.030 kg 10. Polyvinyl Alcohol (to be allowed only for Hand Tufted Woollen carpets) 0.05 kg 11. Sodium Chlorite/Lyogen SMK 0.04 kg 12. Thinner 0.005 kg 13. Caustic Potash 0.14 kg 14. Dyes Stuffs (Acid/Metal complex) 0.043 kg 15. Natural Latex (to be allowed only for Hand Tufted Woollen Carpets) 0.15 kg *Out of which, quantity of Hydrogen Peroxide shall not exceed 0.001 kg. Note.1 Against export of Multicoloured Designed Hand Knotted Woollen Carpets, the following items with quantity may be allowed per 1000 kgs of export within the overall CIF value upto 0.5% of FOB value of export:- "Paper with/without Graph - 150 sq.mtr., Colour Pencil/ Pencil with lead - 1 Piece, Graduate Flexible Curves/ Scale - 1 Piece, Pen Drawing/ Art/ Rapidograph/ Sketch/ Marker - 1 Set, Instrument Box containing compass set, pencil, Lead, Scale, Rubber, Sharpner, Scriber and Cutter work shap - 1 Set, Nibs mapping/ Scrip/ Print Timer with Holder - 1 Dozen, Stapler/ Staple Pin - 1000 Packs, Hand Operated Punching Machine - 1 No., Designer's all pins - 2 kgs, Tag gun/ Tag Pins/ Tags - Net to net, Numbering Machine - 1 No., Labaler Gun and Stickers - One/Net to net, Measuring Tape - 1 No. and Magnifying Glass - 1 No." (1) (2) (3) (4) 59. 735 Leather Leather Products Sl.No.G7 Norms covered by this entry shall be substituted by norms as per Annexure "H" to this Public Notice. 60. 740 to 742 Leather Leather Products Sl.No.G10 1. The description of the export product shall be amended to read as under:- "Gents Leather Long Boots/ Gents Leather Long Boot Lasted Uppers". 2. After Note 3, the following note shall be added:- "Note.4 Import of various items covered bySl.No.1(m) shall not be permitted in the caseof export product `Gents Leather Long Boot Lasted Uppers." 61. 780 to 782 Leather Leather Products Sl.No.G40 The quantity of import item 1(s) shall be amended to read as under:- "1.62 mtr. (width upto 5 cm)". 62. 795 Plastic Products Sl.No.H25 1. The description of the export product shall be amended to read as under:- "Articles made of LDPE/LLDPE" 2. The description of the import item may be amended to read as: "Relevant LDPE/LLDPE Granules" 63. 799, 825 834 to 836 Plastic Products Sl.Nos.H47, H48, H49, H167, H168, H218, H219, H220, H221, H222, H223 and H224 Norms covered by these entries shall be deleted. A new norm is appearing at Sl.No.H404 64. 811, 828 832 Plastic Products Sl.Nos.H101, H177, and H205 The norms against these entries shall be deleted. 65. 834 Plastic Products Sl.No.H215 The description of the import item 1 shall be amended to read as under:- "Relevant Polyester film (50-100 Micron)". 66. 837 Plastic Products Sl.No.H238 The word '(Pidivyl HK)' in the description of the export product shall be deleted. 67. 846 Plastic Products Sl.No.H264 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) H264 PVC Foam Sponge Sheet (Unsupported) 1 Sq. Mtr. (1 kg weight) 1. PVC Resin 0.546 kg 2. PVC Plasticizer (DOP) 0.323 kg 3. Blowing Agent 0.028 kg 4. Titanium Dioxide/Pigments 0.0433 kg 5. Processing Aid 0.0820 kg 6. Release Paper 0.50 Sq.mtr. (1) (2) (3) (4) 68. 860 Plastic Products Sl.No.H320 The word `(Pidicryl K-117)' in the description of the export product shall be deleted. 69. 873 Plastic Products Sl.No.H388 In the description of the export product the word "Polyethelene" shall be corrected to read as "Polyethylene". 70. 881 Textile Products Sl.No.J10 The norms covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) J10 Acrylic/Cotton Dyed Yarn 1 kg 1. Acrylic Fibre 1.06 kg/kg content in the export product. 2. Acrylic Dyes of 100% strength 2% of weight of Acrylic content in the export product. 3. Reactive/Vat Dyes of 100% strength 1.5% of weight of Cotton Yarn content in the export product. (1) (2) (3) (4) 71. 883 Textile Products Sl.No.J18 The description of the export product shall be amended to read as under:- "Bleached or Processed Polyester/Cotton Blended Fabrics or Madeups". 72. 884 Textile Products Sl.No.J21 The description of the export product shall be amended to read as under:- "Blended Polyester/Cotton Grey Fabrics or Madeups". 73. 909 to 912 Textile Products Sl.Nos.J124, J126, J127, J129, J130 and J131 The description of the import item 5 against these entries shall be amended to read as under:- "Reeled Tusser Silk Yarn". 74. 918 Textile Products Sl.No.J177 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) J177 Gents Long Full Sleeve Jacket with Hood Collar without Lining (made out of Nylon Tafetta Fabric) 1 Pc. 1. Nylon Tafetta Fabric (GSM=60 +/- 10%) 3.00 Sq.Mtr. 75. 928 Textile Products Sl.No.J248 The norm covered by this entry shall be substituted by the following:- J248 Woollen Blended Yarn containing Polyester/Wool/Acrylic/Viscose/Nylon (Grey/Dyed) 1 kg 1. Polyester Fibre/Polyester Staple Fibre OR 1.13 kg/kg content in the export product. 1. Polyester Tow 1.08 kg/kg content in the export Product. 2. Scoured Wool OR 1.211 kg/kg content in the export product. 2. Wool Tops 1.10 kg/kg content in the export product. 3. Acrylic Fibre OR 1.13 kg/kg content in the export product. 3. Acrylic Tow 1.05 kg/kg content in the export product. 4. Viscose Fibre/Viscose Staple Fibre 1.115 kg/kg content in the export product. 5. Tinting Agent 0.005 kg 6. Softening Agent 0.010 kg 7. Diserse Dyes of 100% Strength 2% of wt. of Polyester content in export product 8. Acrylic Dyes of 100% Strength 2% of Wt. of Acrylic content in export product 9. Metal Complex Dyes of 100% Strength 2% of wt. of Wool content in export product. 10. Pigment/Napthol/ Direct/Reactive dyes of 100% strength 2% of wt. of Viscose content in export product 11. Nylon Fibre OR 1.11 kg/kg content in the export product. 11. Nylon Tops 1.08 kg/kg content in the export product. 76. 930 Textile Products Sl.No.J255 The description of the export product shall be amended to read as under:- "Dyed/Dyed and Printed Fabrics/Sarees". 77. 956 Miscellaneous Products Sl.No.K97 The norm covered by this entry shall be substituted by the following:- (1) (2) (3) (4) (5) K97 Pre-Lubricated Jute Rope/Core Rope (Multifold) containing 18% of Lubricants of Dry Jute Fibre weight 1 kg 1. Jute Fibre OR 1.08 kg/kg content in the export product. 1. Jute Yarn 1.03 kg/kg content in the export product. 2. Batch Oil 0.030 kg 3. Lubricants 0.200 kgs 78. 957 Miscellaneous Products Sl.No.K105 The description of the export product shall be amended to read as under:- "Black/Red Iron Oxide Pigment". 79. 960 Miscellaneous Products Sl.No.K119 (Introduced vide Public Notice No.52 dated 5.11.98) The description of the import item 1 shall be amended to read as under:- "Relevant Circular Knitted Pile Fabric/relevant Artificial fur". 80. All Export Products The validity of certain norms published in the Hand Book of Procedures,Vol.2, which were valid upto a specified period shall be extended upto 30.6.1999. For regularisation of these norms beyond this date, the exporter should follow the procedure given in Para 10 of General Note for all export products. Annexure "B" to Public Notice No.3 Dated 5.4.1999. CHEMICALS AND ALLIED PRODUCTS (1) (2) (3) (4) (5) A2182 Ketoprofen Isopropylamine Salt 1 kg 1. Aniline 1.267 kg 2. 2-Chloro Propionic Chloride OR 1.60 kg 2. a)2-Chloro Propionic Acid 1.60 kg 2. b)Thionyl Chloride 2.23 kgs 3. Benzoyl Chloride 1.64 kg 4. Aluminium Chloride 4.25 kgs 5. Isopropyl Alcohol 0.75 kg 6. Ortho Dichloro Benzene 2.50 kgs 7. Ethyl Acetate 4.50 kgs 8. Acetone 1.00 kg 9. Mono Isopropylamine 0.35 kg 10. Yellow Phosphorus 1.18 kg A2183 Anilophos 25% + Ethoxy Sulfuron 1% WP (Rice Guard 26 WP) 1 kg 1. Anilophos Technical 0.255 kg 2. Ethoxy Sulfuron Salt Technical 0.0102 kg 3. Phenyl Xylyl Ethane 0.096 kg 4. Sodium Salt of Fatty Acid Methyl Taurate 0.02 kg 5. Sodium Ligno Sulfonate 0.122 kg 6. Precipited Silica 0.443 kg A2184 Amlodipine 1 kg 1. Phthalic Anhydride 1.58 kgs 2. Mono Ethanol Amine 0.65 kg 3. Ethyl-4-Chloro Aceto Acetate 1.52 kg 4. Ortho Chloro Benzaldehyde 0.92 kg 5. Methylene Chloride/Benzene 7.50 kgs 6. Acetone/Petroleum Ether 3.36 kgs 7. Mono Methylamine 40% 8.62 kgs 8. Methyl Aceto Acetate 2.56 kgs 9. N-Hexane 6.11 kgs 10. Ethyl Acetate/IPA 7.30 kgs 11. Acetic Acid 9.00 kgs 12. Benzene Sulfonic Acid 0.58 kg 13. Sodium Hydride 0.99 kg 14. Benzene 6.60 kgs 15. Methanol 3.75 kgs 16. Piperadine 0.05 kg 17. Toluene 4.80 kgs 18. Activated Charcoal 0.20 kg. A2185 Pigment Red 5 (C.I.No.12490) 1 kg 1. N-N-Diethyl 4-Methoxymetanil Amide (Fast Red ITR Base) 0.434 kg 2. 5-Chloro-3-Hydroxy 2,4-Dimethoxy-2-Naphthanilide (Naphthol AS ITR) 0.601 kg 3. Sodium Nitrite 0.116 kg A2186 Pigment Red 17 (CI No.12390) 1 kg 1. 5-Nitro Ortho Toludide (Fast Scarlet G Base) 0.375 kg 2. Sodium Nitrite 0.170 kg 3. 3-Hydroxy 2-Naphtho-O-Toludide (Naphthol ASD) 0.684 kg A2187 Thio Diphenol 98% 1 kg 1. Phenol 1.652 kg 2. Sulphur Dichloride 0.905 kg 3. Toluene 0.931 kg A2188 Methyl Ethyl Ketone (MEK) 1 kg 1. Secondary Butyl Alcohol 1.05 kg A2189 Benzyl Albuterol 2(Tertiary Butyl-amine)-1-(4-Ben-zyloxy-3-Hydroxy Methyl Phenyl Ethanol) 1 kg 1. Sodium Dihydro BIS (2 Methoxy Ethoxy Aluminate 70% Active Toluene) (Vitride) 2.372 kg 2. Sodium Borohydride 0.156 kg 3. Selimium Dioxide 0.723 kg 4. Tertiary Butyl Amine 0.768 kg A2190 Nylon Phenol Ethoxylate 4 Moles 1 kg 1. Nonyl Phenol 0.556 kg A2191 Nylon Phenol Ethoxylate 9.5 Moles 1 kg 1. Nonyl Phenol 0.363 kg A2192 Pigment Yellow 17 (CI No.21105) 1 kg 1. 3,3 Dichloro Benzidine 0.408 kg 2. Sodium Nitrite 0.222 kg 3. Aceto Acet Ortho Anisidide 0.667 kg A2193 Pigment Orange 13 (CI NO.21110) 1 kg 1. 3,3 Dichloro Benzidine 0.406 kg 2. Sodium Nitrite 0.221 kg 3. Aceto Acet Ortho Anisidide 0.558 kg A2194 Pigment Orange 34 (CI No.21115) 1 kg 1. 3,3 Dichloro Benzidine 0.413 kg 2. Sodium Nitrite 0.225 kg 3. Para Tolyl-3-Methyl-5-Pyrazolone 0.608 kg A2195 Pigment Red 32 (CI No.12320) 1 kg 1. Amino Anisic Acid Anilide 0.509 kg 2. 3-Hydroxy, 2-Naphthanilide (Naphthol AS) 0.554 kg 3. Sodium Nitrite 0.145 kg A2196 Pigment Red 22 (CI No.12365) 1 kg 1. 5 Nitro Ortho Toludide (Fast Scarlet G Base) 0.408 kg 2. Sodium Nitrite 0.174 kg 3. 3-Hydroxy 2-Naphthanilide Naphthol AS) 0.660 kg A2197 Yellow Iron Oxide Pigment 1 kg 1. Ferrous Sulphate 1.650 kg 2. Iron Powder 0.428 kg 3. Caustic Soda 0.450 kgs. A2198 Zinc Di Butyl Dithio Carbamate 1 kg 1. Di-Butyl Amine 0.568 kg 2. Zinc Chloride(40%) 0.791 kg 3. Carbon Disulphide 0.344 kg 4. Caustic Soda 0.200 kg A2199 Yellow Iron Oxide Pigment 1 Kg. 1. Ferrous Sulphate Hepthydrate. 1.650 Kg. 2. Iron Powder 0.428 Kg. 3. Caustic Soda 0.450 Kgs. A2200 Iso-Octanol 1 MT 1. Heptene 838 kg 2. Copper Chromite Catalyst 0.300 kg 3. Nickel Catalyst 0.280 kg 4. Cobalt Oxide Catalyst 0.300 kg A2201 Iso Decanol 1 MT 1. Nonene 886 kg 2. Copper Chromine Catalyst 0.300 kg 3. Nickel Catalyst 0.280 kg 4. Cobalt Oxide catalyst 0.300 kg A2202 Polypropylene (Homo Polymer) 1 MT 1. Propylene 1.03 MT 2. Active shac-103 0.069 KG 3. Triethyl Aluminium 0.208 KG 4. PEER (SCA) 0.139 KG 5. Antioxidants: Irgonox-1010/ Irgonox-3114/ Ethanox-330/ Ultranox-626/ Irgofos-168 1.717 KG 6. Additives: Hydrotalcite DHT-4A/Erucamide/Olemide/Gresil/ AB-720/Glceryl Monosterate (Myverol 18-6) Zinc Oxide/Acrawax 2.500 KG A2203 Pigment Yellow 14 (Non Rosinated) CI NO.21095 1 kg 1. 3,3 Di Chloro Benzidine 0.397 kg 2. Sodium Nitrite 0.217 kg 3. Aceto Acet Ortho Toludide 0.597 kg A2204 Dimethylamine Hydrochloride 1 kg 1. Dimethylamines 60% Solution 1.00 kg A2205 MG Colour Poster Paper containing 25% softwood pulp based on wood/bamboo 1 kg 1. Softwood Pulp 0.25 kg 2. Sodium Hydroxide 0.056 kg 3. Sodium Sulphate 0.055 kg 4. Chlorine 0.105 kg 5. Hydrogen Peroxide 0.009 kg 6. Lime 0.660 kg 7. Sulphur 0.001 kg 8. Sulphuric Acid 0.0007 kg 9. Rosin 0.016 kg 11.Alum/Non Ferric 0.050 kg 12.Deformer 0.003 kg 13.Relevant Papers Dyes/Colouring Agent(Natural/Kemwait/V-Blue/Yellow/Rhodamine Green/Violet 0.003 kg A2206 MG Colour Board containing 9.7% Softwood Pulp based on wood/bamboo 1 kg 1. Softwood Pulp 0.097 kg 2. Sodium Hydroxide 0.061 kg 3. Sodium Sulphate 0.060 kg 4. Chlorine 0.114 kg 5. Hydrogen Peroxide 0.010 kg 6. Lime 0.719 kg 7. Sulphur 0.002 kg 8. Sulphuric Acid 0.0008 kg 9. Rosin 0.018 kg 11.Alum/Non Ferric 0.059 kg 12.Talcum Powder 0.144 kg 16.Relevant Papers Dyes/Colouring Agent(Natural/Kemwait/V-Blue/Yellow/Rhodamine Green/Violet 0.002 kg A2207 White Woven Writing Paper containing 25% softwood pulp based on wood/ bamboo 1 kg 1. Softwood Pulp 0.25 kg 2. Sodium Hydroxide 0.069 kg 3. Sodium Sulphate 0.052 kg 4. Chlorine 0.073 kg 5. Hydrogen Peroxide 0.006 kg 6. Lime 0.629 kg 7. Sulphur 0.001 kg 8. Sulphuric Acid 0.003 kg 9. Rosin 0.012 kg 10. Alum 0.022 kg 11. Alum/Non Ferric 0.014 kg 12. Talcum Powder 0.051 kg 13. Starch 0.001 kg 14. Whitening Agent 0.001 kg 15. Deformer 0.002 kg 16. Relevant Papers Dyes/Colouring Agent(Natural/Kemwait/V-Blue/Yellow/Rhodamine Green/Violet) 0.001 kg A2208 SS Colour Card containing 12.8% softwood pulp based on wood/bamboo. 1 kg 1. Softwood Pulp 0.128 kg 2. Sodium Hydroxide 0.071 kg 3. Sodium Sulphate 0.059 kg 4. Chlorine 0.081 kg 5. Hydrogen Peroxide 0.007 kg 6. Lime 0.511 kg 7. Sulphur 0.002 kg 8. Sulphuric Acid 0.006 kg 9. Rosin 0.013 kg 10. Alum/Non Ferric 0.046 kg 11. Talcum Powder 0.123 kg 12. Starch 0.018 kg 13. Deformer 0.0005 kg 14. Relevant Papers Dyes/Colouring Agent(Natural/Kemwait/V-Blue/ Yellow/Rhodamine Green/Violet ) 0.013 kg 15. Wax Emulsion 0.001 kg A2209 Lamivudine 1 kg 1. L (-)Tartaric Acid 5.73 kg 2. 1,4-Dithiane 2,5-Dihydroxy 3.02 kg 3. Cytosine 1.24 kg 4. Sodium Meta Periodate 9.31 kg 5. Tetrahydrofuran 4.29 kg 6. Trimethyl Iodosilane 6.62 kg 7. 2,2,2-Trifluoric Ethylene 3.29 kg 8. Sodium Borohydride 1.73 kg A2210 Sodium Sulphite 1 kg 1. Caustic Soda 0.705 kg A2211 Sodium Meta Bisulphite 1 kg 1. Caustic Soda 0.467 kg A2212 Sodium Bisulphite 1 kg 1. Caustic Soda 0.426 kg A2213 Organic Synthetic tanning Agent containing Phenol Formaldehyde condensate 57% Naphthalene Formaldehyde condensate 15% and (C4-C5) 13% dicarboxylic acid distillate 1 kg 1. Phenol 0.350 kgs 2. Formaldehyde 37% 0.448 kgs 3. Napthalene 0.084 kgs 4. Caustic Soda Flakes 0.164 kgs 5. Dicarboxylic Acid 0.130 kgs A2214 Organic Synthetic tanning Agent containing 66% Phenol Formaldehyde condensate 17% Naphthalene Formaldehyde condensate (Tystyntan to Base) 1 kg 1. Phenol 0.415 kgs 2. Formaldehyde 37% 0.529 kgs 3. Napthalene 0.096 kgs 4. Caustic Soda Flakes 0.193 kgs A2215 Sodium Phenyl Acetate (100% Basis) 1 kg 1. Benzyl Chloride OR 0.935 kg 1. i)Toluene 0.830 kg 1. ii)Sodium Cyanide 0.360 kg 1. iii)Sodium Hydroxide 0.300 kg 1. iv)Tri-N-Butyl Amine 0.008 kg A2216 Ethofumesate 97% Min. 1 kg 1. Isobutyraldehyde 0.510 kg 2. Parbenzoauinone 0.583 kg 3. Methane Sulphonyl Chloride 0.680 kg 4. Morpholine 0.580 kg 5. Toluene 0.665 kg 6. Triethyl Amine 0.256 kg 7. Ethyl Alcohol denatured. 1.412 kg A2217 Choline Di-chlora (2-Dichloroethyl) Trimethyl Ammonium Chloride 1 kg 1. Ethylene Dichloride 0.660 kg A2218 D-Trans Allethrin 1 kg 1. 2-Methyl Furan 0.738 kg 2. Dimethyl Formamide 0.609 kg 3. Phosphorus Oxy-Chloride 1.453 kg 4. Magnesium Turnings 0.190 kg 5. Allyl Chloride 0.605 kg 6. Glycine Ethyl Ester Hydro-chloride 1.950 kg 7. 2,5 Dimethyl 2,4 Hexadiene 2.152 kg 8. Thionyl Chloride 0.476 kg 9. Toluene 0.792 kg 10. Tetra Hydro Furan 0.042 kg 11. Ethylene Dichloride 2.210 kg 12. Methanol 0.444 kg 13. Di Isopropyl Ester 1.093 kg 14. L-Base (D-Threo (1-P-Nitro-phenyl) -2-amino Propane 1,3 Diol) 0.438 kg 15. Pyridine 0.297 kg 16. Sodium Nitrite 0.965 kg 17. Caustic Soda 2.840 kg . ENGINEERING PRODUCTS (1) (2) (3) (4) (5) C1401 Heat Recovery Wheel - Model HRW-600 1 No. 1. Aluminium Foil 1.05 kg/kg content in the export product. 2. Molecular Sieve 3 Automised Activated Powder Net to net. 3. Clear Waterbase 4. Adhesives in Liquid form Upto 5% of the FOB value of export. 5. Thinner C1402 Convertor Heat Exchanger 1 No. 1. Seamless Tubes 1.02 kg/kg content in the export product. 2. B Q Plates 1.05 kg/kg content in the export product. 3. Stainless Steel Plates 1.05 kg/kg content in the export product. 4. Low Alloys Steel Plates 1.05 kg/kg content in the export product. 5. Miscellaneous Items: a)Stainless Steel Welding Electodes b)Carbon Welding Electrodes Upto 1% of the FOB value of export. C1403 Aluminium Cops 1 Pc. 1. Aluminium Tubes/Pipes 1.05 kg/kg content in the export product. 2. ABS Granules (Relevant Grade) 1.05 kg/kg content in the export product. 3. Nylon Granules (Relevant Grade) 1.05 kg/kg content in the export product. 4. CRCA Sheet 1.05 kg/kg content in the export product. C1404 Nut Shaft Assy. for Automobile 1 No. 1. SAE 8602 Bar/Round 1.20 kg/kg content in the export product. 2. CRCA Sheet 1.05 kg/kg content in the export product. 3. Steel Ball Net to net. C1405 Disc Horn 1 No. 1. Spring Steel Strip 1.05 kg/kg content in the export product. 2. Bakallite Strip 1.02 kg/kg content in the export product. 3. Spring (Lower contact finger) Net to net. 4. Support (Upper contact finger) Net to net. 5. Tungsten Contacts Net to net. 6. CRCA Sheet 1.10 kg/kg content in the export product. 7. Copper Wire 1.02 kg/kg content in the export product. 8. Insulating Bush Net to net. 9. Adjusting Screen Net to net. 10. Bobbin Net to net. 11. Glass Filled Nylon 66 1.05 kg/kg content in the export product. 12. Hydrophobic Filter Net to net. C1406 Stainless Steel Casseroles of various designs (based on non CFC PU Insulation) 1 Kg. 1. Stainless Steel Coil 0.5 mm Thickness (AISI 304 grade) 1.40 Kg/Kg content in the export product. 2. Polyol 0.525 Kg of PU content in the export product. 3. Isocynate (MDD) 0.525 Kg of PU content in the export product. 4. ABS(Acrilonitrile Butadine Styrene) Plastic the 1.050 Kg/Kg content in export product. C1407 Cow Magnets/ Pill 1 No. 1. Rare Earth Magnet (7 gm each) (Relevant diameters) 2 Nos. 2. Stainless Steel Casing 1 No. 3. M.S. Pole Pcs (Centre) 1 No. 4. M.S. Pole Pcs (Ends) 2 Nos. C1408 Steel Cable Drum in various sizes 1 Kg. 1. CRCA Sheet/Coil 1.05 Kg/Kg content in the export product. 2. H.R. Steel/Coil 1.03 Kg/Kg content in the export product. 3. Non Alloy Steel Round Bar 1.02 Kg/Kg content in the export product. Annexure "D" to Public Notice No.3 Dated 5.4.1999. FOOD PRODUCTS (1) (2) (3) (4) (5) E73 Frozen Meat packed in packing of LDPE/HDPE/PP Granules, Kraft Paper and Card Board other than Ivory Board 1 MT 1. LDPE/HDPE/PP/LLDPE Granules 15 kgs 2. Kraft Paper 1.10 Kg/Kg content in export product 3. Card Board other than Ivory Board 1.10 Kg/Kg content in export product Annexure "E" to the Public Notice No.3 Dated 5.4.1999. PLASTIC PRODUCTS (1) (2) (3) (4) (5) H401 Bags made out of Artificial/Synthetic Leather Cloth 1 No. 1. Relevant PVC coated fabric 0.4 Sq.mtr. 2. Relevant nylon fabric silver coated 0.88 sq.mtr. 3. Polyester cloth laminated with PVC/PU2 1.65 sq.mtr 4. Relevant PVC clear film 0.40 sq.mtr 5. Rivets Washers 10+10 Nos. 6. Sliders 13 Nos. 7. Zippers 4.20 Mtrs. 8. Nylon fabric laminated with PU2 0.29 sq.mtr. 9. Relevant embroidered labels: Woven labels/PVC Labels/Tags 3 Nos. Note: The inputs permitted for import shall be accounted for in the resultant product. H402 Mariners Mat made of Poly Ethylene (Monofilament) 1 kg 1. Polyethylene Monofilament rope, 3 strand, Z Twist, 9.5 mm dia 1.02 kg/kg content in the export product. H403 Polyester Staple Fibre/Polyester Tow/Polyester Tops 1 kg 1. PET Chips/Flakes 1.05 kg 2. Carbon Black 0.0184 kg 3. Spin Finish Oil 0.01 kg H404 Printed flexible packaging material of one layer or printed or unprinted adhesive laminated/extrusion laminated flexible packaging material of multilayers of relevant substrate with or without hotmel in the form of rolls/strips/sheets/labels/wrappers or in pouch form 1 Kg. 1. Relevant substrate(various types, thickness grades) of either one or in combination of more than one layer of any of the following items:- a)Polyethylene film b)Polyester film c)Metallised polyester film d)BOPP film e)Metallised BOPP film f)Cellophane film g)Pearlised BOPP film h)PVC film i)Metalised PVCfilm j)CPP(Cast Polypropylene) film k)LDPE Granules (for extrusion coating) l)Aluminium foil m)Paper of various types grammage Quantity as per the formula below + wastage 2. Liquid Printing Ink (total solid 25% +/- 3%) 10 GMS/Sq.Mtr + wastage. 3. Liquid Polyurethane adhesive (total solid 60% +/- 5%) 4.0 GMS/Sq.Mtr + wastage. 4. Liquid Polyurethane additive (total solid 50% +/- 5%) 0.8 GMS/Sq.Mtr+ wastage. 5. Relevant Hotmelt Actual Grammage + wastage. FORMULA The composite weight in Gms per Sq.Mtr.(GSM) of the export product is to be calculated as A+B+C+D+E+F where: A = Weight in Gms per Sq.Mtr.(GSM) of relevant film used as 1st layer as at Sr.No.1 which is to be determined as follows: Specific gravity of the film X thickness(Micron) = GMS/Sq.Mtr. B = Weight in Gms per Sq.Mtr.(GSM) of relevant film used as 2nd layer as at Sr.No.1 which is to be determined as follows: Specific gravity of the film X thickness (micron) = GMS/Sq.Mtr. C = The weight of ink at S.No.2 on dry weight basis shall be taken as 2.5 Gms/Sq.Mtr. on an average having total solid content of25%+/-3%. D = The weight of adhesive at S.No.3 on dry weight basis shall be taken as 2.5 Gms/Sq.Mtr. on an average having total solid content of 60%+/-5%. E = The weight of additive at S.No.4 on dry weight basis shall be taken as 0.20 Gms/Sq.Mtr. on an average having total solid content of 50%+/-5%. F = The weight of relevant hotmelt in gms per sq.mtr. The above is for two layer printed flexible packaging material/laminate. In case of single layer flexible packaging material in the export product items at `B', `D', `E' shall be excluded. A + B + C + D + E + F GMS = wt. of 1 sq. mtr. of export product. Therefore, 1000 1 Kg. of export item =___________________ = Sq.Mtr. of export product. A+B+C+D+E+F Entitlement of rawmaterial as at i) Net content of A in the export product S.No.1-5 for 1 Kg. of export product shall be determined as follows: A ____________________ = M Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input A = M Kg X____________________________= ___Kg 100 ii) Net content of B in the export product shall be determined as follows: B _____________________ = P Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input B = P Kg X ___________________________= ___Kg 100 iii) Net content of C in the export product shall be determined as follows: 2.5 100 __________________ X_____________ = Q Kg A + B + C + D + E + F 25@ (100+wastage%) Therefore entitlement of input C = Q Kg X___________________________ = ___Kg 100 iv) Net content of D in the export product shall be determined as follows: 2.5 100 ___________________ X ____________ = R Kg A + B + C + D + E + F 60@ (100+wastage%) Therefore entitlement of input D = R Kg X __________________________ = ___Kg 100 v) Net content of E in the export product shall be determined as follows: 0.2 100 __________________ X______________ = S Kg A + B + C + D + E + F 50@ (100+wastage%) Therefore entitlement of input E = S Kg X__________________________ = ___Kg 100 vi) Net content of F in the export product shall be determined as follows: F ____________________ = T Kg A + B + C + D + E + F (100+wastage%) Therefore entitlement of input F = T Kg X__________________________ = ___Kg 100 @ This represents total solid of the respective inputs at S.No. 2,3 4. NOTES 1. Exporter shall declare type of flexible packaging material i.e. adhesive laminated or extrusion laminated flexible material. In addition the exporter shall also declare composition of export product indicating no. of layers, thickness of each film/substrate in respect of the inputs as at Sr. No.1 to be used in the export product. 2. FLEXIBLE PACKAGING MATERIAL/LAMINATE CONTAINING SINGLE LAYER OF INPUTS AS AT SR. NO.1 In the case of export of single layer printed flexible packaging material, import of relevant inputs at Sr. No.1 2is allowed with wastage of 12% (twelve) and 10% (ten)respectively. Further, the import of input at Sr. No.5 is allowed with wastage of 10% (ten) if the product is exported with hotmelt. (However, import of inputs at Sr. No.3 4 will not be allowed for said product). 3. FLEXIBLE PACKAGING MATERIAL/LAMINATE CONTAINING TWO LAYERS OF INPUTS AS AT SR. NO.1 i)In the case of export of two layer printed flexible packaging material/laminate the import of relevant inputs as at Sr.No.1,2,3 4 is allowed with wastage of 15% (fifteen), 10% (ten), 10% (ten) and 10% (ten) respectively. The import of input at Sr.No.2 i.e. liquid printing ink will not, however, be allowed in the case of export of unprinted flexible packaging material. Further the import of inputs as at Sr.No.5 is allowed with wastage of 10% (ten) if the product is exported with hotmelt. ii) In the case of export of extrusion coated flexible packaging material/laminate the import of inputs as at Sr.No.1(k) i.e. LDPE granules will alone be allowed with wastage of 10% (ten). However, the import of items as at Sr.No.3 4 will not be allowed. 4. MULTILAYER FLEXIBLE PACKAGING MATERIAL/LAMINATE CONTAINING MORETHAN TWO LAYERS OF INPUTS AS AT SR.NO.1 i)In the case of export of such product, the import of relevant inputs as at Sr.No.1 is to be allowed with additional wastage of 3% for each additional layer over and above wastages allowed in two layer flexible packaging material/laminate referred to in the note 3(i) above. ii) The quantity of inputs as mentioned at Sr.Nos.3 4 i.e. liquid polyurethane adhesive (4 gms/sq.mtr.+ wastage) and liquid polyurethane additive (0.80 gms/sq.mtr.+wastage) are allowed for import in the case of export of flexible packaging material/laminate containing two layers of the inputs as at Sr.No.1 and for each additional layer the said quantity of the inputs would be permitted for import. However, in the case of export of extrusion coated flexible packaging material/laminate the import of inputs at Sr.No.1(k) above will be allowed for import with wastage of 10% (ten). iii) The quantity of input allowed as at Sr.No.2 i.e. liquid printing ink will, however, remain unchanged irrespective of the addition of no. of layers. iv) The import of item at Sr.No.5 i.e. relevant hotmelt is allowed with wastage of 10% (ten) if the product is exported with hotmelt. 5. EXPORT PRODUCT IN POUCH FORM If the resultant product is in pouch form, additional wastage as mentioned below is to be allowed over and above the wastage allowed in case of single layer or two layer or multilayer flexible packaging material depending upon the specific type of pouch to be exported. POUCH TYPE WASTAGE 1. Centre Seal/sideseal 3 % (three) 2. Standups/standup with reclosable zipper 5 % (five) 3. Pouches with spouts 8 % (eight) For export of HDPE spout fixed pouches 1.05 Kg. of HDPE Granules is allowed for 1 Kg. of HDPE content in the export product. Exporter should also declare the specific type of pouch to be exported. 6. The total solid content taken on an average basis for liquid printing ink, liquid adhesive and liquid additive has been taken as 25% +/- 3%, 60% +/- 5% and 50% +/- 5% respectively. 7. Additional wastage of 5% (five) is allowed for conversion of LDPE Granules to LDPE films. However the additional wastage of5% (five) shall not be allowed for conversion of the LDPE granules in the extrusion lamination process. Additional wastage of 5% (five) for converting PP granules to BOPP film and 5% (five) wastage for PET chips to polyester film is allowed. 8. Exporter shall have the option to apply for import of inputs; for making polyester film as per SION published in EXIM Policy/Procedure in lieu of import of polyester films as such. 9. If the manufacturing process involves extra step of converting base plastic film (as at Sr.No.1) to holography film then the import of relevant film used for holographic expression will be permitted with additional wastage of 3% (three) over and above the entitlement for various flexible laminates/pouches. 10. In case of unprinted material, ink is not to be allowed and consequently wt. of dry ink taken at `C' in the formula is not to be taken for calculation purposes. 11. In case of export product without hotmelt, hotmelt is not to be allowed and consequently wt. of hotmelt taken as `F' in the formula is not to be taken for calculation purpose. 12. Specific gravity of raw material to be used in the export product are as under: 1. PET 1.38 2. Metallised PET 1.38 3. BOPP 0.90 4. Metallised BOPP 0.90 5. PVC 1.28 6. Metallised PVC 1.28 7. LDPE 0.92 8. CPP 0.90 9. Cellophane 1.48 10. Pearlised BOPP 0.62 11. Aluminium Foil 2.7 12. Paper GSM of paper (1) (2) (3) (4) (5) H405 White Pulverised Powder (containing minimum 92% of LDPE) 1 Kg. 1. LDPE Granules 0.935 Kg. 2. Titanium Dioxide 0.085 Kg. H406 Nylon Twine 1 Kg. 1. Nylon Filament Yarn 1.02 Kg. Annexure "F" to Public Notice No.3 Dated 5.4.1999. TEXTILE PRODUCTS (1) (2) (3) (4) (5) J304 Silk Wool Fabrics 1 kg 1. Spun Silk Yarn 1.050 kg/kg content in the export product. 2. Scoured Wool 1.300 kg/kg content in the export product. J305 100% Natural Silk Madeups made ofSilk Georgette Fabrics Dyed and/ or Printed and/or Embroidered 1 kg 1. 100% Natural Silk Georgette Fabrics of relevant GSM +/- 10% 1.02 kg Annexure "G" to Public Notice No.3 Dated 5.4.1999. (1) (2) (3) (4) (5) C1374 Machined cast components for switchgears resistance -welding parts, Heat Sinks, Diode bases manufactured out of high conductivity copper with other alloying elements like Chromium, Nickel, Beryllium, Cobalt and Silicon each not exceeding 5% conforming to BS 1400-HCC1/BS1400-CC1-TF/DIN-17655 GCU L50-DIN 17655 GCU CR F35/ASTMB 770-87a/ R40, R75, R76, R78, R80 of AFNOR specification meeting conductivity requirements of 40 to 90% IACS 1 kg 1. Cathode Copper and respective alloying element Chromium,Nickel, Cobalt, Beryllium and Silicon 1.20 kg/kg content in the export product. C1375 Machined Cast Bushings of Automotive and Non-Automotive applications, Pumps and Valve components like Casing, Impellers Discs,Plugs,Yoke Sleeves,Seals, Spacers and Bearing, Hexagonal Nuts, Earthing Clamps manufactured out of Gun Metal or Red Brass with copper and alloying elements Tin, Lead and Zinc vary-ying from 2 to 10% each, conforming to BS1400-LB2, LG2, LG4/DIN 1705-RG5,RG7/ ASTMB 584 or ASTMB 763-C84400, C93200/ C93700/ SAE 660 1 kg 1. Gun Metal/ Red Brass Scrap or Ingot OR 1.20 kg/kg content in the export product. Cathode Copper/Copper Scrap with alloying elements Tin, Lead and Zinc 1.25 kg/kg content in the export product. C1376 Machined Cast components for valve internals like Spindle, Stems, Yoke Sleeves, Yoke Bushes, Discs, Wedges, Seat Rings machined bushes for both Automotive and Non-Automotive applications manufactured out of Silicon brass/Silicon bronze/high tensile brass with copper and other alloying elements, like Zinc varying from 10 to 35% and other elements like Aluminium, Manganese, Silicon, Iron, Lead each not exceeding 5% conforming to ASTMB584-C87500, C-87600, C-87610/ASTMB371-69400/BS1400 HTB1, HTB3 1 kg 1. Brass Scrap or ingots with other balancing alloying elements OR 1.20 kg/kg content in the export product. Cathode copper/Copper scrap with alloying elements like zinc, aluminium, lead, manganese and silicon 1.25 kg/kg content in the export product. C1377 Machined Cast Components for valve internals like spindles, stems, yoke sleeves, yoke bushes, discs, widges, sealing or seat rings and machined bushes for both Autotmotive and Non-Automotive applications manufactured out of Aluminium bronze with copper and Aluminium 8 to 11% and Iron 1.5 to 3.5% conforming to BS1400-AB1/ASTMB 148-C-95200, C-95300/DIN 1714 GCUAL 10 FE 1 kg 1. Aluminium Bronze ingots or scrap OR 1.20 kg/kg content in the export product. Cathode copper/ copper scrap and aluminium 1.25 kg/kg content in the export product. Annexure "H" to Public Notice No.3 Dated 5.4.1999 (1) (2) (3) (4) (5) G7 a)Finished Leather from Hide of Cow/Buffalo 1000 Sq.ft. 1. Preservative 2 kgs 2. Wetting Agent 10 kgs 3. Soaking Enzyme 5 kgs 4. Unhairing Agent: a)Sodium Sulphide 5 kgs b)Sulfohydrate 5 kgs 5. Leather Liming Auxilliaries 2.5 kgs 6. Deliming Agent 10 kgs 7. Bating Agent 5 kgs 8. Leather Degreasing Agent (Fatty Alcohol/Esters/ Fatty Acid Derivatives) 5 kgs 9. Bleaching Agent (Sodium Bisulfite/Hydrogen Peroxide/Sodium Chlorite/Potassium Per-Manganate) 2.50 kgs 10. Formic Acid 10 kgs 11. Acetic Acid 5 kgs 12. Chrome Tanning Agent: a)for full chrome finish 50 kgs b)for semi chrome finish OR 22 kgs Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for vege-table tanning 150 kgs 13. Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for retanning 20 kgs 14. Zirconium Tanning Salt 10 kgs 15. Sodium Formate/Acetate 8 kgs 16. Sodium Bicarbonate 8 kgs 17. Soda Ash 4 kgs 18. Magnesium Oxide 5 kgs 19. Syntan 54 kgs 20. Oxalic Acid 2.50 kgs 21. Sodium Dithionate (Hy-drose) 2.50 kgs 22. Fatliquours 24 kgs 23. Dye Levelling Agent 2 kgs 24. Dyes(Acid dyes/Direct dyes/Premetallised dyes/Basic Dyes/Reactive dyes/Sulphur dyes) 12 kgs (Out of the total quantity of 12 Kgs, the quantity of Reactive dyes shall not exceed 0.6 kg) 25. Dispersing Agent 5 kgs 26. Cationic Dye Fixative 5 kgs 27. Impregnating Resin 20 kgs 28. Penetrating Agent 4 kgs 29. Pigments 10 kgs 30. a)Binders other than those indicated below 10 kgs b)Casein based binders OR 5 kgs Resin/Polyurathane based binders 10 kgs 31. Liquid Dyes(Based on Acid dyes/Basic dyes/Metal complex dyes) 10 ltrs 32. Feel Modifiers 1 kg 33. Lacquer Emulsion 10 kgs 34. Slipagents(Silicon based Oil) 1 kg 35. Fixing Agents/Cross Linkers (Formaldehyde free) 1 kg 36. Wax Emulsion 2 kgs 37. Oil/Wax for pull up finish 15 kgs 38. Fillers for Leather Industry 3 kgs 39. Spl. Auxiliaries for Stain/Fire/Grease/Water/Alkali/Acid/Oil Resistance 5 kgs 40. Pearlised Pigment and Powder 1 kg 41. Fluorescent Pigment 4 kgs 42. Special Lacquer for Brush off/Two tone 10 kgs *43. Transfer foil (Polyester/Polyurethane Metalised film-Silver/Gold/Bronze/Mat/Plain/Two Tone effect/Glazy/Nubuck effect/Pull up effect/Suede effect/Floral and other design effects) 120 Sq.Mtrs. Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. 44. Miscellaneous Items: a)Knife Blades/Band Knives: Splitting Band Knife/Fleshing Knife/Shaving Knife b)Grinding Wheels for Splitting Machine/Fleshing Machine/Shaving Machine c)Felt/Felt Sleeves Samming Machine/Setting cum Samming/ Polishing Felt Roller d)Stones: Polishing Stone Roller/Wet Buffing Stone Roller e)Emery Paper: Roll of 50 Metre Length f)Glazing Glass g)Padding Mohair cloth h)Embossing plate Upto 5% of FOB value of export, out of which value of each of the items at (e), (g) (h) shall not exceed 5% of the overall CIF value of miscellaneous items permitted for import. G7 b) Finished Leather from Skin of Goat/Sheep/Calf 1000 sq.ft. 1. Preservative 1.5 kg 2. Wetting Agent 5 kgs 3. Soaking Enzyme 2.5 kgs 4. Unhairing Agent: a)Sodium Sulphide 2.5 kgs b)Sulfohydrate 2.5 kgs 5. Leather Linning Auxilliaries 1.5 kg 6. Deliming Agent 2.5 kgs 7. Bating Agent 5 kgs 8. Leather DegreasingAgent (Fatty Alcohol/Esters/Fatty Acid Derivatives) 5 kgs 9. Bleaching Agent(Sodium Bisulfite/ Hydrogen Peroxide/Sodium Chlorite/Potassium Per-manganate) 1.5 kg 10. Formic Acid 10 kgs 11. Acetic Acid 2.5 kgs 12. Chrome Tanning Agent: a)for full chrome finish 30 kgs b)for semi chrome finish OR 13 kgs Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for vege-table tanning 55 kgs 13. Wattle Extract/Chestnut/Gambier/Quebracho/Tara/Sumac for retanning 12 kgs 14. Zirconium Tanning Salt 5 kgs 15. Sodium Formate/Acetate 5 kgs 16. Sodium Bicarbonate 4 kgs 17. Soda Ash 2 kgs 18. Magnesium Oxide 2.5 kgs 19. Syntan 17 kgs 20. Borax 5 kgs 21. Oxalic Acid 2.50 kgs 22. Sodium Thio-sulphate 5 kgs 23. Sodium Dithionate (Hy-drose) 1 kgs 24. Fatliquours 20 kgs 25. Dye Levelling Agent 1 kgs 26. Dyes(Acid dyes/Direct Dyes/Premetallised dyes/Basic Dyes/Reactive dyes/Sulphur dyes) 10 kgs (Out of the total quantity of 10 kgs,the quantity of Reactive dyes shall not exceed 0.5 kg) 27. Dispersing Agent 2.5 kgs 28. Cationic Dye Fixative/Impregnating Resin 5 kgs 29. Pigments 10 kgs 30. a)Binders other than those indicated below 10 kgs b)Casein based binders OR 15 kgs Resin/Polyurathane based binders 10 kgs. 31. Liquid Dyes (based on Acid dyes/Basic dyes/Metal complex dyes) 10 ltrs. 32. Feel Modifiers 1 kg 33. Lacquer Emulsion 10 kgs 34. Slipagents(Silicon based Oil) 1 kg 35. Fixing Agents/Cross Linkers (Formaldehyde free) 1 kg 36. Wax Emulsion 2 kgs 37. Oil/Wax for pull up finish 15 kgs 38. Filles for Leather Industry 3 Kgs. 39. Spl. Auxiliaries for Stain/Fire/Grease/Water/Alkali/Acid/Oil Resistance 5 kgs 40. Pearlised Pigment and Powder 1 kg 41. Fluorescent Pigment 4 kgs 42. Special Lacquer for Brush off/Two tone 10 kgs *43. Transfer foil (Polyester/Polyurethane Metalised film-Silver/Gold/Bronze/Mat/Plain/Two Tone effect/ Glazy/Nubuck effect/Pull up effect/Suede effect/Floral and other design effects) 120 Sq.Mtrs. Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. 44. Miscellaneous Items: a)Knife Blades/Band Knives: Splitting Band Knife/Fleshing Knife/Shaving Knife b)Grinding Wheels for Splitting Machine/Fleshing Machine/Shaving Machine c)Felt/Felt Sleeves Samming Machine/Setting cum Samming/Polishing Felt Roller d)Stones: Polishing Stone Roller/Wet Buffing Stone Roller e)Emery Paper: Roll of 50 Metre Length f)Glazing Glass g)Padding Mohair cloth h)Embossing plate Upto 5% of FOB value of export, out of which value of each of the items at (e), (g) (h) shall not exceed 5% of the overall CIF value of miscellaneous items permitted for import