DES - Standard Input - Output Norms Added/ Modified - DGFT - 12 (RE-2000)/1997-2002

DES - Standard Input - Output Norms Added/ Modified PUBLIC NOTICE No.12 (RE-2000)/1997-2002 Dated 1st June, 2000 . Attention is invited to Paragraph 4. 11 of the Export and Import Policy 1997-2002. as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.l. 1997-2002. as amended and also to the Handbook of Procedures. Vol.2, 1997-2002. as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11. of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments / modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments / corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2428, the new entries from Sl.No.A-2429 to A-2438 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1530, the new entries from Sl.No.C-1531 to C-1537 shall be added as per Annexure "C" to this Public Notice. This issues in Public interest. Sd/- (N.L Lakhanpal) Director General of Foreign Trade ANNEXURE "A" AMENDMENTS / CORRECTIONS -------------------------------------------------------------------------------------- Sl. Page Reference Amendments / Corrections No. No. -------------------------------------------------------------------------------------- 1. 174 Chemicals The norms covered by this entry shall be Allied Products substituted by the following:- S. No. A1412 ---------------------------------------------------------------------------------- Sl. Export Qty. Import Qty. No. Item allowed --------------------------------------------------------------------------------- A1412 N(1,3 Dimethyl Butyl) 1 Kg. 1. Aniline 0.463 Kg. N Phenyl- 2. MIBK (Methyl 0.444 Kg. Para Phenylene Isobutyl Ketone) Diamine 3. Para Nitro Chloro 0.761 Kg. (Minimum 95%) Benzene 4. Formic Acid (85%) 0.354 Kg. 5. Potassium Carbonate0.459 Kg. 6. Platinum Catalyst 0.0002 Kg. ----------------------------------------------------------------------------------- 2. 306 Chemicals The description of import item Sl. No. 1 shall be Allied Products amended to read as under :- S. No. A2299 "L-Glutamine and without Sodium Bicarbonate." 3. 307 Chemicals The quantity of export item shall be corrected to Allied Products read as under :- S. No. A2301 "10,000 vials." 4. 438 Engineering After import item No. 7, the following item (with Products quantity) shall be added:- Sl. No. C169 8. Aluminium Sheet / CRCA -1.05 Kg/Kg Sheet (for Blades of Fan) content in (only the relevant item used the export in the export to be allowed) product." 5. 589 Engineering After import item No. 1, the following alternative Products item (with quantity) shall be added:- Sl.No. C697 "OR Aluminium Wire 36.225 Kg." (Not below 3mm) 6. 589 Engineering After import item No. 1, the following alternative Products item (with quantity) shall be added: Sl. No. C698 OR Aluminium Wire 5.999 Kg." (Not below 3mm) 7. 607 Engineering 1. The description of import item No. 1 (with Product quantity) shal1 be amended to read as Sl. No. C829 under: 1. C.R.S.S. Strip 988 Kgs. OR H.R.S.S. Strip 1522 Kgs. 2. At the end of this entry the following Note shall be added NOTE:- "In so far as H.R.S.S. is concerned, the input norm as above shall be valid for a period of one year viz. upto, 31.3.2001 only after which it shall be reviewed." 8. 615 Engineering 1. Import item No. 5 alongwith quantity shall Product be deleted. Sl. No.C876 2. After import itern No. 4 the following items (with quantity) shall be added :- "5. Polyox WSRN 750 -44 Kg. 6. Polyox Coagulant -44 Kg. 7. General purpose Polystyrene -38 Kg." 3. The note below this norm shall be amended to read as under: NOTE:- 1. The items at S.No. 5,6 and 7 above shall be allowed only if the product exported is with Lubra Strip 9. 712 Engineering The description of import item No. 1 (without any Product change in quantity) shall be amended to read as Sl. No. C1315 under. "Inco's Nickel Rounds / Pellets Unwrought Unalloyed." 10. 757 Engineering The description of import item No. 1 (alongwith Product quantity) shall be amended to read as under: Sl. No.C1503 1. Copper concentrate -1.06 MT/MT of Copper content in the export Product. OR Copper Scrap -1.075 MT/MT copper content in the export product. Blister -1.04 MT/MT copper content in the export product." 11. 805 Food Product After import item No. 3 the following items (with Sl.No.E51 quantity) shall be added "4. Kraft Paper -Net+ 1 % wastage 5. Adhesive (Powder form) 0.005 gm (aprox.) 6. Printing Ink -0.00005 gm." 12. 830 Leather Product 1. After import item No. 7, the following item 831 Sl.No.G18 (with quantity) shall be added "8. Leather Chemicals -As per Leather Chemicals prescribed in G- 7, on pro-rata basis". 2. At the end of this entry the following foot-note shall be added "Note :2 For import of Leather Chemicals (Item No. 8) the requirement of Finished Leather per number of Glove is 0.50 sq. ft.". 13. 873 Plastic Product After import item No. 1 the following additional Sl.No.H-90 item with quantity shall be added "2. Trigonox 101 (2,5 Bis tert- 0.007 butylperoty -2,5-dimethyl kg/kg". hexane, minimum 92% in solvent) 14. 951 Sports Goods 1. The description of export item (without change Sl. No. I-23 in quantity), shall be amended to read as under : "Head Guard made out of PVC / PU leather cloth". 2. The description of import item (without change in quantity) shall be amended to read as under "Relevant PVC / PU Leather Cloth". 15. 1 General Notes for " In the general notes, note No. 4 shall be deleted all Export Product Group -------------------------------------------------------------------------------------- ANNEXURE "B" CHEMICALS AND ALLIED PRODUCTS ----------------------------------------------------------------------------------------------- Sl. Export Item Qty. Import Item Qty No. Allowed. ----------------------------------------------------------------------------------------------- A2429 Tris Nonyl Phenyl 1 Kg. 1. Nonyl Phenol 1.066 Kg. Phosphite 2. Phosphorous Trichloride 0.222 Kg. A2430 Cis-2-(2,4-Dichlorophenyl) 1 Kg. 1. 2,4 Dichloro Acetophenone 3.07 Kg. -2- (1-H-Imidazole-1, 2. Imidazole 1.38 kg. -yl-methyl-1,3- Dioxolan 3. Toluene 6.41 kg. -4-y1) methyl-P-Toyl 4. Methanol 9.08 kg. sulplhonate 5. Methyl Isobutyl Ketone 0.74 kg. OR Cis-Tosylate A2431 Cyanoacetamide 1 kg. 1. Monochloro Acetic Acid 3.75 kg. 2. Sodium Cyanide 1.36 kg. 3. Acetone 1.75 kg. 4. Methyl Isebutyl Ketone 1.36 kg. A2432 Reactive Polyamide Resin 1 kg. 1. Domer Acid 0.684 kg. with Free Amino Groups and 2. Triethylene Tetramine 0.443 kg. Viscosity at 25°C 125 to 3. Industrial Mono Carboxylic poises (SYNPOL-140) Fatty Acid 0.029 kg. A2433 Reactive Polyamide Resin 1 kg. 1. Industrial Monocarboxylic with High Amine value Fatty Acid 0.600 kg. (340-400) Long Pot Life 2. Triethylene Tetramine 0.440 kg. and Viscosity at 25°C 2 to 6 poises (SYNPOL-160) A2434 Slow curing Solvent free 1 kg. 1. Aniline 0.470 kg. aromatic polyamine Epoxy 2. Epoxy Resin 0.384 kg. adduct (Epoxy Resin 3. Dibutyl Phthalate 0.360 kg. Hardner-340) Viscosity -50- 90 Poises Pot life -8-10 hrs. A2435 Fast Curing Solvent free 1 kg. 1. Aniline 0.442 kg. aromatic polyamine Epoxy 2. Epoxy Resin 0.146 kg. adduct (Epoxy Resin 3. Dibutyl Phthalate 0.338 kg. Hardner-350) Viscosity- 150- 210 Poises Pot life -20-30 minutes A2436 Polyvinyl Butyral Resin 1 kg. 1. Poly Vinyl Alcohol 0.710 kg. 2. N-Butyraldehyde 0.429 kg. A2437 BOPP Bags with / without 1 kg. 1. BOPP Film (relevant 1.02 kg/kg Adhesive Tape thickness and grade) content in the export Product 2. Double side self-adhesive 1.02 Tape sq.mtr /sq. mtr. content in the export product Note: The item No. 2 viz. Double side self-adhesive Tape shall be permitted for import only when the product is exported with adhesive tape. A2438 Reactive Polyamide Resin 1 kg. 1. Domer Acid 0.236 kg. with High Amine Value 2. Triethylene Tetramine 0.431 kg. (380-420) Rapid curing 3. Industrial Mono carboxylic and Viscosity at 25° 10 to Fatty Acid 0.389 kg. 15 poises (SYNPOL- 150) -------------------------------------------------------------------------------------- ENGINEERING PRODUCTS ANNEXURE'C' -------------------------------------------------------------------------------------- Sl. Export Item Qty. Import Item Qty. No. Allowed -------------------------------------------------------------------------------------- C1531 Pneumatic Tools-Hand 1 No. 1. Relevant Inlet bushing 1 No. drills without Muffler 2. Relevant Hose tail 1 No. with chuck 3/4" X 3/4" 3. Relevant Throttle lever 1 No. (19mm X 95.2mm) 4. Relevant Rear Valve seat 1 No. 5. Relevant Front Valve Seat 1 No. 6. Relevant Valve 1 No. 7. Relevant Handle bare 1 No. 8. Relevant Throttle Valve bushing 1 No. 9. Relevant Bolt 2 No. 10. Relevant Pawl 2 No. 11. Relevant Ratchet Ring 1 No. 12. Relevant Cylinder 1 No. 13. Relevant Piston 1 No. 14. Relevant Cylinder bushing 1 No. 15. Relevant Retainer Plate 1 No. 16. Relevant Chuck 1 No. 17. Relevant chuck sleeve 1 No. 18. Relevant front head 1 No. 19. Relevant Plunger shifter1 No. 20. Relevant shifter sleeve 1 No. 21. Relevant Retainer sleeve 1 No. NOTE: The import of components shal1 be allowed on net to net basis with accountability clause. C1532 Pneumatic Tools-Hand 1 No. 1. Relevant Inlet bushing 1 No. drills with Muffler and 2. Relevant Hose tail 1 No. shifier sleeve with chuck 3. Relevant Throttle lever 1 No. 3/4" X 3/4" (19mm X 4. Relevant Rear Valve seat 1 No. 95.2mm) 5. Relevant Front Valve Seat 1 No. 6. Relevant Valve 1 No. 7. Relevant Handle bare 1 No. 8. Relevant Throttle Valve bushing 1 No. 9. Relevant Bolt 2 No. 10. Relevant Pawl 2 No. 11. Relevant Ratchet Ring 1 No. 12. Relevant Cylinder 1 No. 13. Relevant Piston 1 No. 14. Relevant Cylinder bushing 1 No. 15. Relevant Retainer Sleeve 1 No. 16. Relevant Retainer Plate 1 No. 17. Relevant Chuck 1 No. 18. Relevant Chuck Sleeve 1 No. 19. Relevant Front head 1 No. 20. Relevant Muffler 1 No. 21. Relevant Plug-Muffler 1 No. 22. Relevant Button-rotation release 2 No. 23. Relevant Washer-clamping 1 No. 24. Relevant Plunger Shifter 1 No. 25. Relevant Shifter Sleeve 1 No. 26. Relevant Depth gauge 1 No. 27. Relevant dead handle 1 No. NOTE: The import of components shall be allowed on net to net basis with accountability clause. C1533 Pneumatic Tool Concrete 1 No. 1. Relevant Live Air Handle Vibrator with 2-1/2 Cap 1 No. (inch) Head 2. Relevant Plug Handle 1 No. 3. Relevant Live Air Handle cover 1 No. 4. Relevant Sleeve 1 No. 5. Relevant Hose Nipple 2 No. 6. Relevant 'Band-It' Clamp 2 No. 7. Relevant Intake Hose 1 No. 8. Relevant Shell Nose Cap 1 No. 9. Relevant End Cap 1 No. 10 Relevant Eccentric Shaft Nut Assembly 1 No. 11. Relevant Upper end Plate 1 No. 12. Relevant Eccentric Weight 1 No. 13. Relevant Eccentric Shaft 1 No. 14. Relevant Lower end Plate 1 No. 15. Relevant Hose Clamp (Band-It),3 No. 16. Relevant Swivel Nipple 1 No. 17. Relevant Lock wire 1 No. 18. Relevant Hose Clamp (Band-It) 2 No. 19. Relevant Hose Nipple 1 No. 20. Relevant Exhaust Swivel Collar 1 No. 21. Relevant Live air hose 1 No. 22. Relevant Strainer 1 No. 23. Relevant Oiler body 1 No. 24. Relevant Live air handle stem Bushing 1 No. 25. Relevant Exhaust Hose 1 No. Note: The import of components shall be allowed on net to net basis with accountability clause. C1534 Pneumatic Tool 1 No. 1. Relevant Valve 1 No. 2. Relevant retainer 1 No. 3. Relevant Piston 1 No. 4. Relevant Sprint 2 No. 5. Relevant Cylinder 1 No. 6. Relevant Clamp 1 No. 7. Relevant Muffler 1 No. 8. Relevant Muffler P1ug 1 No. 9. Relevant Housing 1 No. 10. Relevant Pin 2 No. 11. Relevant Air Tube 1 No. 12. Relevant Bushing 2 No. 13. Relevant Shaft 1 No. 14. Relevant Button 1 No. 15. Relevant Bush 1 No. 16. Relevant Bearing 2 No. 17. Relevant Sleeve 1 No. 18. Relevant Casting 1 No. 19. Relevant Chain Link Lead 1 No. 20. Relevant throttle valve 1 No. 21. Relevant Handle 1 No. NOTE:- The import of components shall be allowed on net to net basis with accountability clause. C1535 Pneumatic Tool 1 No. 1. Relevant Handle Bracket Rock Drill (made of steel Gr. SAE 8620) 1 No. 2. Relevant Handle Bolt (made of steel Gr.EN 9) 1 No. 3. Relevant Air inlet swivel (made of steel Gr. EN24) 1 No. 4. Relevant Air inlet swivel nut (made of steel Gr. SAE 8620) 1 No. 5. Relevant Blower valve (made of steel Gr. SAE 8620) 1 No. 6. Relevant Thru Bold (made of steel Gr. EN24) 2 No. 7. Relevant Front head (made of steel Gr. SAE 8620) 1 No. 8. Relevant Retainer (made of steel Gr. SAE 8620) 1 No. 9. Relevant Retainer trunnion (made of steel Gr. SAE 8620) 2 No. 10. Relevant Cylinder (made of steel Gr. SAE 8620) 1 No. 11. Relevant Back head (made of steel Gr. SAE 8620) 1 No. 12. Relevant Throttle valve handle (made of steel Gr. SAE 8620) 1 No. 13. Relevant Ratchet ring (made of steel Gr. SAE 8620) 1 No. 14. Relevant Valve case (made of steel Gr. 354 ) 1 No. 15. Relevant Blower valve bushing (made of steel Gr. SAE 8620) 1 No. 16. Relevant Rifle bar nut (Bronze) (made of steel Gr. SAE 8620) 2 No. 17. Relevant Piston (made of steel Gr. 355 ) 1 No. 18. Relevant Bushing Cylinder (made of steel Gr. SAE 8620) 1 No. 19. Relevant Air tube (made of steel Gr. SAE 8620) 20. Relevant Chuck rotation nut (made of steel Brass) 1 No. 21. Relevant Chuck Sleeve (made of steel Gr. SAE 8620) 1 No. 22. Relevant Chuck (made of steel Gr. SAE 8620) 1 No. 23. Relevant Rifle bar (made of steel Gr. SAE 8620) 1 No. 24. Relevant Valve (made of steel Gr. SAE 8620) 1 No. 25. Relevant Valve Guide Bushing (made of steel Gr. SAE 8620) 1 No. 26. Relevant Bushing water valve (made of steel Brass) 1 No. 27. Relevant Throttle Valve (made of steel Gr. SAE 8620) 1 No. NOTE:- The import of components shall be allowed on net to net basis with accountability clause. C1536 Pneumatic Tool 1 No. 1. Relevant Throttle valve Rivetting Cutter (made of steel (buster) 8" to Gr. SAE 8620) 1 No. 11" Cylinder 2. Relevant Throttle tube (made of stee1 Gr. ENIA) 1 No. 3. Relevant Throttle lever (made of steel Gr. EN8) 1 No. 4. Relevant Valve case lid (made of steel Gr. SAE 8620) 1 No. 5. Relevant Valve (made of steel Gr. EN24) 1 No. 6. Relevant Valve case (made of steel Gr. SAE 8620) 1 No. 7. Relevant Handle (made of steel Gr. EN8) 1 No. 8. Relevant Spring clip (Lock collar) (made of steel Gr. EN8) 1 No. 9. Relevant Lock collar (made of steel Gr. EN8) 1 No. 10. Relevant Cylinder (made of steel Gr. EN24) 1 No. 11. Relevant Piston (made of steel Gr. T118 CR2) 1 No. 12. Relevant Lower sleeve (made of steel Gr. EN31) 1 No. 13. Relevant Upper Sleeve (made of steel Gr. EN31) 1 No. 14. Relevant Retainer sleeve (made of steel Gr. EN24) 1 No. 15. Relevant Exhaust Deflector (made of steel Gr. SAE1070) 1 No. NOTE:- The import of components shall be allowed on net to net basis with accountability clause. C1537 Regulators with 1 No. 1. Zinc 245 rotating outlet (227 gms for LPG gms) cylinder --------------------------------------------------------------------------------------