Amendments/modifications & additions in SION - DGFT - 49 (RE-2000)/1997-2002

Amendments/modifications additions in SION PUBLIC NOTICE NO.49(RE-2000)/1997-2002 Dated 01/01/2001. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2515, the new entries from Sl.No.A-2516 to A-2525 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1577, the new entries from Sl.No.C-1578 to A-1582 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No.E-89, the new entries Sl.No.E-90 to E-93 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After the existing entry at Sl.No.H-434, the new entry Sl.No.H-435 shall be added as per Annexure "E" to this Public Notice. This issues in public interest. Sd/- (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE (S. L. GUPTA) DY. DIRECTOR GENERAL OF FOREIGN TRADE FOR DIRECTOR GENERAL OF FOREIGN TRADE Annexure "A" to the Public Notice No.49 Dated: 01/01/2001 AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 18-19 Chemicals Allied Products Sl.No.A79 The description of export item shall be amended to read as under:- "Atenolol BP/USP". 2. 32-33 Chemicals Allied Products Sl.No.A163 The description of import item at Sl. No. 15 (with quantity) shall be amended to read as under:- "15. Phosphorous - 0.700 kg Trichloride OR Yellow/White - 0.16 kg". Phosphorous 3. 170 Chemicals Allied Products Sl.No.A1371 The quantity of import item at Sl. No. 1 shall be amended to read as under:- "1.580 kg". 4. 288 Chemicals Allied Products Sl.No.A2150 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2150 Dimethyl Amino Ethyl Chloride Hydrochloride 1 kg 1. Dimethyl Amino Ethanol 2. Thionyl Chloride 3. Ethylene Dichloride 0.687 kg 0.913 kg 0.50 kg 5. 294 Chemicals Allied Products Sl.No.A2205 The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "Bleached Soft Wood Pulp" The quantity of import item Nos. at Sl. 4 5 shall be amended to read as under:- "4. 0.079 kg 5. 0.007 kg". 6. 295 Chemicals Allied Products Sl.No.A2206 The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "Bleached Soft Wood Pulp" The quantity of import item Nos. at Sl. 4 5 shall be amended to read as under:- "4. 0.103 kg 5. 0.009 kg". 7. 295 Chemicals Allied Products Sl.No.A2207 The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "Bleached Soft Wood Pulp" The quantity of import item Nos. at Sl. 4 5 shall be amended to read as under:- "4. 0.055 kg 5. 0.005 kg". 8. 295 - 296 Chemicals Allied Products Sl.No.A2208 The description of import item at Sl. No. 1 (without any change in quantity) shall be amended to read as under:- "Bleached Soft Wood Pulp" The quantity of import item Nos. at Sl. 4 5 shall be amended to read as under:- "4. 0.071 kg 5. 0.006 kg". 9. 10 Electronics Products Sl. No. B-131 Introduced Vide Public Notice No. 38 Dated: 01/11/2000 The Note below this entry shall be deleted. 10. 601 Engineering Product Sl.No.C791 The description of import item at Sl. No. 1 (with quantity) shall be amended to read as under:- "1. Stainless Steel Bars/ - 2.0 MT Billets/Blooms". 11. 813-815 Leather Products Sl.No.G-3 After the Note No. 1 the following Note shall be added below this norm:- "Note2:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 2.95 sq.ft. if item at sl.no. 1(a) (b) are not asked for, (ii) 2.65 sq.ft. per pair if item at sl.no. 1(a) is not asked for, (iii) 1.7 sq.ft. per pair if item at sl.no. 1(b) is not asked for and (iv) 1.4 sq.ft. per pair if item at sl.no.1(a) 1 (b) are not asked for". 12. 816 Leather Products Sl.No.G-6 The following Note No. 1 shall be added below this norm:- "Note1: The average consumption of finished leather for ladies hand gloves will be 2 sq.ft./pair and that of gents 2.5 sq.ft./pair.". 13. 819-820 Leather Products Sl.No.G-8 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 8 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) (b) is asked for.". 14. 820-822 Leather Products Sl.No.G-9 After the Note No. 1 the following Note shall be added below this norm:- "Note2:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 8 sq.ft. if item 1(a) 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft. if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) (b) are asked for". 15. 822-823 Leather Products Sl.No.G-10 After the Note No. 1 the following Note shall be added below this norm:- "Note2:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 10 sq.ft. if item 1(a) 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) (b) are asked for". 16. 824 Leather Products Sl.No.G-11 The following Note No. 1 shall be added below this norm:- "Note1:- Requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather products', shall be worked out taking into account the area of Finished Leather as 1.5 Sq. ft/pair of Gents Leather Sandle Upper.". 17. 824-825 Leather Products Sl.No.G-12 After the Note No. 2 the following Note shall be added below this norm:- "Note3:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required is 1.5 sq.ft. per pair.". 18. 825-826 Leather Products Sl.No.G-13 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) (b) is asked for.". 19. 826-828 Leather Products Sl.No.G-14 After the Note No. 1 the following Note shall be added below this norm:- "Note2:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 4.25 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.75 sq.ft. if item 1(a) is not asked for, (iii) 2.5 sq.ft. if item 1(b) is not asked for, and (iv) 2.00 sq.ft. if 1(a) (b) is asked for.". 20. 828-829 Leather Products Sl.No.G-15 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 10 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9.5 sq.ft. if item 1(a) is not asked for, (iii) 5.5 sq.ft. if item 1(b) is not asked for, and (iv) 5.00 sq.ft. if 1(a) (b) is asked for.". 21. 831-832 Leather Products Sl.No.G-22 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 3.65 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 3.25 sq.ft. if item 1(b) is not asked for, (iii) 2.15 sq.ft. if item 1(c) not asked for, and (iv) 1.75 sq.ft. if 1(a) (c) are asked for.". 22. 840-841 Leather Products Sl.No.G-29 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per pair is (i) 9.4 sq.ft. if item 1(a) and 1(b) are not asked for, (ii) 9 sq.ft. if item 1(a) is not asked for, (iii) 5.15 sq.ft. if item 1(b) is not asked for, and (iv) 4.75 sq.ft. if 1(a) (b) are asked for.". 23. 844 Leather Products Sl.No.G-35 The following Note No. 1 shall be added below this norm:- "Note1:- For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required per glove is 1.2 sq.ft..". 24. 943 Plastics Product Sl.No.H-410 The description of export item shall be amended to read as under:- "PVC Lace Table Mats/Coasters/Doileys". 25. 17 Miscellaneous Product Sl.No.K-126 Vide Public Notice No. 19 Dated: 03/07/2000 The norm covered by this entry shall be deleted from Miscellaneous Product Group and this entry has been shifted to Food Products Group with prior import condition. Annexure "B" to the Public Notice No.49 Dated: 01/01/2001 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A2516 Metoclopramide HCL BP 1 kg 1. Meta Amino Phenol 2. Potassium Carbonate 3. N,N, Diethyl Ethylene Diamine 4. Dimethyl Formamide 1.73 kg 3.21 kg 0.51 kg 0.49 kg A 2517 Triclosan Oral Grade conforming to the following specifications:- 2,3,7,8 Tetra Chloro Dibenzofuran 1ppt, 2,3,7,8 Tetra Chloro Dibenzo-p- dioxin 1ppt, 2,4,4' Trichloro-2-Nitro Diphenyl Ether 0.01%, 2,4,4' Trichloro-2-Amino Diphenyl Ether 0.01%. 1 kg 1. 2,4 Dichloro Phenol 2. Perchloro Ethylene 3. Sodium Nitrite 4. Isopropyl Alcohol 3.00 kg 10.00 kg 0.63 kg 5.00 kg A2518 Fenvalerate 20% EC 1 kg 1. Fenvalerate Tech. 90% 2. Solvent C-9 0.227 kg 0.688 kg A2519 Prepared adhesives based on Plastics (Two component Laminating Adhesives) Adhesive (Polyu-rethane solution containing 60% resin content and 40% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent) 1 kg 1 kg 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 0.094 kg 0.270 kg 0.050 kg 0.204 kg 0.016 kg 0.035 kg 0.400 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg A2520 Prepared adhesives based on Plastics (Two components Laminating Adhesives) Adhesive (Polyu-rethane solution containing 66% resin content and 34% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent) 1 kg 1 kg 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 0.103 kg 0.297 kg 0.055 kg 0.224 kg 0.018 kg 0.038 kg 0.340 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg A2521 Prepared adhesives based on Plastics (Two components Laminating Adhesives) Adhesive (Polyu-rethane solution containing 25% resin content and 75% solvent) Additive (Poly Isocyanate solution contain-ing 50% solid and 50% solvent) 1 kg 1 kg 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 1. Adipic Acid 2. Isophthalic Acid 3. Mono Ethylene Glycol 4. Diethylene Glycol 5. 1,6-Hexane Diol 6. Toluene Di-iso-cyanate 7. Ethyl acetate/ methyl Ethyl Ketone (relevant) 0.039 kg 0.113 kg 0.021 kg 0.085 kg 0.007 kg 0.015 kg 0.750 kg 0.012 kg 0.037 kg 0.032 kg 0.060 kg 0.002 kg 0.372 kg 0.500 kg A2522 Paranitro benzyl bromide, 99% min. purity 1 kg 1. Paranitrotoluene 2. Liquid Bromine 3. Carbon Tetrachloride 4. Methanol 1.300 kg 1.300 kg 0.900 kg 1 kg A2523 Nylon Tyre Yarn (Nylon-6) 1 MT 1. Nylon Chips (Nylon-6) 2. Spin Finish Oil 3. Cuprous Iodide 4. Tetra Methyl Thiuram Disulphide (TT) 1.078 MT 32.25 kg 0.44 kg 0.107 kg A2524 Ethyl 2, Methyl 3, 4 Penta dianoate 1 kg 1. Tri-ethyl orth propionate 2. Propargyl Alcohol 1.782 kg 0.549 kg A2525 PVC Shower curtains 1 kg 1. Relevant PVC Film 1.06 kg/kg content in the export product Annexure "C" to the Public Notice No.49 Dated: 01/01/2001 ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed C1578 Fire Clay Bricks/Shapes 1 MT 1. Calcined Clay 2. Non-Plastic Clay 3. Ball Clay 4. SRM-30 (Calcined Alumina) 0.752 MT 0.220 MT 0.055 MT 0.035 MT C1579 Iron Nickel Alloy wire of different composition 1 kg 1. Nickel Pellets 1.03 kg/kg of Nickel in the export product C1580 Nickel Chrome Alloy wire of different composition 1 kg 1. Nickel Pellets 2. Electrolytic Chromium Metal Flake 1.03 kg/kg of Nickel in the export product 1.03 kg/kg content in the export product C1581 Nickel Copper Alloy wire of different composition 1 kg 1. Nickel Pellets 2. Copper Ingot 1.03 kg/kg of Nickel in the export product 1.03 kg/kg of Copper in the export product C1582 High Speed Steel broaches (cutting tools), Cobalt Non- Cobalt grade 1 kg 1. Relevant High Speed Steel (Cobalt/Non- Cobalt grade) 1.45 kg/kg content in the export product Annexure "D" to the Public Notice No.49 Dated: 01/01/2001 FOOD PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed E90 Processed Black Pepper (Non- Srilankan) (with minimum 2% volatile oil content) 1 MT Unprocessed Black Pepper (non-Srilankan) with extraneous matter less than 2% and minimum 2% volatile oil content. 1.02 MT Note: Export of this item shall be permitted only after import of unprocessed Black Pepper of said specification. E91 Hand made Beedies 1 carton 1. Relevant Cartons Net +1% wastage E92 Ground Nut Kernels 1 kg 1. Raw Jute 2. Relevant LDPE/ HDPE/ PP Granules 1.05 kg/kg content in the export product packaging 1.05 kg/kg content in the export product packaging E93 Natural Sesame Seeds 1 kg 1. Raw Jute 2. Relevant LDPE/ HDPE/ PP Granules 1.05 kg/kg content in the export product packaging 1.05 kg/kg content in the export product packaging Annexure "E" to the Public Notice No.49 Dated: 01/01/2001 PLASTIC PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed H435 Epoxite Novalac Resin Powder (Softening Point - 110+5°C 1 MT 1. Bisphenol - A 0.91 MT