Implementation of GST in Customs - Changes in BE/SB Declaration - Customs - PUBLIC NOTICE NO. 10/2017

OFFICE OF THE COMMISSIONER OF CUSTOMS (PREVENTIVE COMMISSIONERATE) 55-17-3, C-14, 2nd Floor, Road No.2, Industrial Estate, Autonagar Vijayawada - 520 007 C. No. VIII/48/98/2016-Cus.Tech. Date: 28.06.2017 PUBLIC NOTICE NO. 10/2017 Subject: Implementation of GST in Customs - Changes in BE/SB Declaration - Reg. Attention of Importers/Exporters, Custom Brokers Trade is invited to Implementation of GST from 1st July, 2017. Reference is also invited to Taxation Law (Amendments) Act, 2017 (18 of 2017), bringing out amendments in Customs and Central Excise legislations in alignment with GST implementation. Further reference is invited to various decisions in GST Council meeting, documentation of the same in CBEC Website and also the advisory issued by Member(Customs) vide D.O. letter dated 20.6.17 on Customs related matters on introduction of Goods and Service Tax regime and Public Notice No. 09/2017, dated 21.06.2017 issued by Customs Preventive Commissionerate, Vijayawada. 2. The legislations referred above have necessitated changes in Bill of Entry and Shipping Bill declarations. The revised electronic format for both BE/SB has already been published in ICEGATE Website (https;//www.iceate.gov.in/msg_guideline.html). The salient features of these changes in the format of the declarations are enumerated below for easy reference and compliance. Changes in Bill of Entry: 3. The Changes in Bill of Entry can be broadly listed as follows: a) Levy and Collection of IGST b) Declaration of CETH e) Identification of GST Beneficiary d) Seamless credit flow based on online reconciliation of IGST with GST return. 4. Levy and Collection of IGST: (i) The Taxable Value for calculation of IGST value is laid out as per Section 3(8) of the Customs Tariff Act. The IGST and GST Compensation Cess would be collected as Additional Duty of Customs under section 3(7) and 3(9) of the Customs Tariff Act. (ii) The IGST rates are going to be notified by Central Government through a Notification under Section 5 of IGST Act, 2017. The percentage rate of integrated tax in respect of goods specified will be in respective schedules. Similar is the case for GST Compensation Cess Schedule under Section 8(2) of GST (Compensation to States) Act, 2017. The importer shall have to quote the notification number and serial number in the format SCH SL.NO (Schedule suffixed by serial No of the schedule) for levy of IGST rate. For instance, under Schedule II and for an item under Serial Number 3, the serial number in the declaration should be 113 . (iii) The IGST Exemption can also be availed if applicable, by quoting relevant notification Issued under section 6 of IGST Act or Customs Act as applicable. Similar is the case for Compensation Cess under Section 8(2) of GST (Compensation to States) Act' 2017. To effect the above changes, the fields have been used/added in BE Declaration (SBE Table)- other Additional duties In Section 3 (CTA) : Fields in Bill of Entry For IGST For GST C.Cess Notification Number IGST Levy Notfn No GST Comp. Cess Notfn. No Notification Sl. No Sl. No in format explained below Sl. No in format explained below Duty Flag G G Addi. Duty Flag G P Exmp. Notification Number Notfn. No, if applicable Notfn. No, if applicable Exmp. Sl.No Sl. No in format explained below Sl. No in format explained below Exmp. Notfn. Type G by Default; C - customs Notfn. G by Default; C - customs Notfn. The Illustration for different scenario is as follows: Description Inputs Levy of IGST Duty Flag as G; Addl. Duty Flag as I Levy of GST Compensation Cess Duty Flag as G; Addl Duty Flag as P Levy Exemption of IGST ( IGST Notification) Duty Flag as G; Addl Duty Flag as I; Ex.Flag as G Levy Exemption of GST Cess ( GST Cess Notfn.) Duty Flag as G; Addl Duty Flag as P; Ex.Flag as G Levy Exemption of IGST (Customs Notification)* Duty Flag as G; Addl Duty Flag as I; Ex.Flag as C Levy Exemption of GST Cess ( Customs Notfn.)* Duty Flag as G; Addl Duty Flag as P; Ex.Flag as C * In this case, Customs Exemption Notification should be referred. 5. Declaration of CETH: The Central Excise Tariff shall get stand amended w.e.f. the day the Taxation Law (Amendments) Act, 2017 comes into force. In such a scenario, the Central Excise levy is applicable on certain goods, while it is not applicable on certain goods. Wherever the additional customs duty (CVD) is levied , CETH as applicable may be declared. In case of Non- Applicability of CETH, NOEXCISE should be quoted. 6. Identification of GST Beneficiary: To avail IGST Benefits on Imports, declaration of State Code and GSTIN in Bill of Entry is mandatory. The same needs to be added in CTX Table of the BE Declaration. In any case of non - availment of IGST, State Code along with one of the other Identity proof listed below needs to be provided, so as to enable apportionment to the respective states. Description (1) GSTIN-Imp. (2) Regn_Type (3) Type of IEC to be declared (4) GST Benefit (6) GSTIN Normal G TP,CMP,CAS,ISD,NR,TDS, Individual Yes GSTIN Govt O GOV Generic IEC of Govt. Yes GSTIN UN D UN Generic IEC of Diplomats Yes Aadhaar A Indivi./Generic No Passport P Indivi./Generic No PAN I Indivi./Generic No TAN T Indivi./Generic No To summarize, Every Importer needs to declare their State of Destination as State Code, GST Type as in Column (2) and GSTIN/Identification Code in their Bill of Entry It may be noted that benefits of Credit flow can happen only when GSTIN is quoted correctly and is matched with GSTN; Valid or active Provisional ID can be quoted in lieu of GSTIN. However, credit would flow only when the same Provisional ID is used to file returns. 7. Seamless Credit flow based on Online Reconciliation of IGST with GST Return: In the Pre-GST Era, physical copy of Bill of Entry needs to be submitted to avail the input tax credit of Additional Duty of Customs. Similarly, Physical application along with supporting documents needs to be submitted as per laid out procedure for refund of Special Additional Duty of Customs. With the implementation of GST, there would be seamless credit flow of IGST to the GSTIN Beneficiary mentioned in the Bill of Entry on filing of Returns. However to avail the IGST credit, the importer needs to mention the Port Code, Bill of Entry Number, Bill of Entry Date, aggregate IGST Taxable value, Total IGST Amount, Total GST Compensation Cess in the GST Return which would be validated online with ICEGATE. For the benefit of the Importers, the above details would be made available in the Final copy of the Bill of Entry. 8. IGST Availment in case of Manual Bill of Entry: Since all the validation related to IGST refund or flow of IGST credit would happen electronically between Customs EDT and GSTN, it is imperative here that the required data is captured electronically without fail for all the imports and exports whether or not they are made through EDT locations. In case of EDT locations, Board has issued instructions vide F.No. 401/81/2011-Cus III dated 2nd June 2017 and PN 22/2017 dated 19.062017 issued by Vizag Custom House wherein it is envisaged that any manual bill of entry or shipping bill in EDI locations need to be filed following the procedure laid out in the above instructions. Changes in Shipping Bill: 9. The Integrated Goods and Services Tax Act, 2017, under section i6 provides that export of goods or services or both and supply of goods or services or both to a Special Economic Zone developer or a Special Economic Zone unit shall be zero rated supply and credit of input tax may be availed for making zero-rated supplies, notwithstanding that such supply may be an exempt supply. The section further lays down that a registered person making zero rated supply shall be eligible to claim refund under either of the following options, namely:- (a) he may supply goods or services or both under bond or Letter of Undertaking, subject to such conditions, safeguards and procedure as may be prescribed, without payment of integrated tax and claim refund of unutilised input tax credit; or (b) he may supply goods or services or both, subject to such conditions, safeguards and procedure as may be prescribed, on payment of integrated tax and claim refund of such tax paid on goods or services or both supplied. 10. Under the GST Laws, taxpayers would be filing their outward supply returns on GSTN for all the supplies made by them including exports. For exports, they will be required to quote the Shipping Bill and export invoice details which shall be validated by the Customs EDI system. The confirmation of the export by Customs shall be made once the EGM is filed and closed (in case of ICDs, it should be Gateway EGM, not train Summary). Based on this validation only the taxpayer (exporter) shall be granted refund of the IGST paid by him on the exported goods. This validation shall also act as the proof of export in case the exporter has made the supply under bond or LUT without payment of IGST. For facilitating the above, Shipping Bill forms have also been modified to capture the necessary details. 11. GSTIN Entity identification To avail IGST Benefits on Exports, declaration of State Code and GSTIN in Shipping Bill is mandatory. The same needs to be added in SB Main Table of the SB Declaration. In any case of non availment of IGST, State Code along with one of the other Identity proof listed below needs to be provided. Description (1) GSTIN-Exp.(2) Regn_Type (g) Type of IEC to be declared (4) GST Benefit (s) GSTIN Normal GSN TP,CMP,CAS,ISD,NR,TDS, Individual Yes GSTIN Govt GSG GOV Generic IEC of Govt. Yes GSTIN UN GSD UN Generic IEC of DiPloaqalq Yes Aadhaar ADH Indivi./Generic No Passport PSP Indivi./Generic No PAN PAN Indivi./Generic No TAN TAN Indivi./Generic No 12. IGST Payment Details Following fields shall have to be captured to either sanction refund in case exports are made on payment of IGST or, give the proof of exports in case exports were made under bond/LUT without payment of IGST. IGST Payment Status - To indicate whether the exports are being made on: P - Payment of IGST LUT - Under Bond or LUT NA - Where IGST is not applicable, i.e. the supply is non-taxable; including exports made by non GST registered exporters 13. Taxable Value and IGST Paid Since the actual quantity and value of the goods finally exported may sometimes be at variance with that indicated on the export invoice, these particulars have to be individually declared for every item. Here, Taxable Value is the value of the item actually being exported on which IGST has been paid. In case of short shipments due to shut out/back to town, IGST has to be calculated proportionately item wise in the invoice based on the actual quantity of exports. This is further explained by the following illustration: Illustration An exporter raises an export invoice as below: Item Quantity (units) Unit Price (Rs) Total Price IGST (Rs) A 1000 200 2,00,000 24,000 B 2000 100 2,00,000 24,000 Total 4,00,000 48,000 Due to some reasons, he finally exports only 900 units of Item A and 1900 units of Item B. For his shipping bill, the Taxable value and IGST of each item shall be calculated in proportion of the actual quantity shipped to the quantity on export invoice, i.e. For Item A Taxable Value = (900/1000) X 2,00,000 = ₹ 1,80,000 IGST Paid = (900/1000) X 24,000 = ₹ 21,600 For Item B Taxable Value (1900/2000) X 2,00,000 = ₹ 1,90,000 IGST Paid = (1900/2000) X 24,000 = ₹ 22,800 The taxable value shall be matched with the export invoice particulars declared in the GST return, i.e. the invoice on which IGST was paid. No other invoice like Commercial Invoice etc. should be used for computation of Taxable Value and IGST paid. The refund of IGST shall then be limited to the IGST paid on the goods actually exported, i.e. ₹ 44,400 in the above illustration. 14. Export Invoice Item: Export invoice should be compliant to GST Invoice Rules ( not exceeding sixteen characters containing only alphabets, numerals and two special characters ( / and - ). The export invoice should be issued by the supplier cum exporter in compliance with the GST Invoice Rules. It may also be noted that as per the GST Invoice Rules, in case of export of goods or services, the invoice shall carry an endorsement SUPPLY MEANT FOR EXPORT ON PAYMENT OF INTEGRATED TAX or SUPPLY MEANT FOR EXPORT UNDER BOND OR LETTER OF UNDERTAKING WITHOUT PAYMENT OF INTEGRATED TAX , as the case may be, and shall also contain the following details: (i) name and address of the recipient; (ii) address of delivery; and (iii) name of the country of destination. Other details to be given in the invoice table of the Shipping Bill shall include Third Party remittance details as per RBI requirements, Terms Place(INCOTERMS), End Use (as per the codes available in Imports)etc., as the case may be. The End Use of the Item should be declared against each of the item. The list is provided in Annexure-I. 15. Changes in Drawback Declarations A new declaration is being added for the exporter to certify that no input tax credit of CGST/IGST has been availed for any of the inputs or input services used in the manufacture of the export goods, or that no refund of IGST paid on export goods shall be claimed. For the transition period, i.e. till the exporters continue to have used inputs on which CENVAT was paid, there will be 3 declarations: DBK001 - I declare that no input tax credit of the Central Goods and Services Tax or of the Integrated Goods and Services Tax has been availed for any of the inputs or input services used in the manufacture ofthe export goods. DBK002 - I declare that no refund of Integrated Goods and Services Tax paid on export goods shall be claimed. DBK0O3 - I declare that CENVAT credit on the inputs or input services used in the manufacture of the export goods has not been carried forward in terms of the Central Goods and Services Tax Act, 2017. For Every Item where DBK claimed is suffix as A or C, an exporter is required to declare two codes only, i.e. (1) DBK001 or DBK002 and (2) DBK003 16. Container Details Certain details about the Containers are required in line with the International customs communication as well as with a view to implement e-way bill module in future. Some of this information has been kept optional for now like Movement Document Number etc. Fields which have to be mandatorily declared are: Container Size - As per the codes specified in ISO Directory (enclosed as Annexure-II) Seal Type Indicator - BTSL, RFID, ESEAL (mandatory for factory stuffed goods meant for exports). 17. Transitory Provisions for BE: The Advance/Prior BE filed before the implementation of GST and regularized for implementation may not have relevant declarations for Duty and GSTIN Identifier details. In such clearances may not be allowed in the system. Same applies to Ex Bond BE filed after implementation in respect of Warehousing BE filed before GST implementation. The Importers may seek to reassess the same by feeding applicable IGST notifications and GSTIN identifer during the assessment. GSTIN identifier ( State Code, GSTIN type and GSTIN Code) would be allowed to entered afresh during assessment, only if the same is blank. The GSTIN Identifier cannot be modified at later stages. 18. List of End Use Codes and their description: End Use Code End Use Description DCA100 For Veterinary Medical Use as a Non-Food Product under Controlled Distribution (Trading) DCH100 For Human Medical Use as a Non-1od Product under Controlled Distribution (Trading) DCH300 For Human Medical Use as Transplanted Organ, Tissue, or Fluid DCH400 For Human Medical Use as a Non-Food Product under Controlled Distribution DCH800 For Research use a human medicine DCX200 For manufacture/processing as a human or veterinary medicine (Manufacture/Actual Use) DCX900 Drugs Cosmetics -For personal consumption FSA100 For Animal Food or Feed (Trading! commercial distribution) FSA200 For manufacture/processing as a Animal Food/Feed (Manufacture/Actual Use) FSA800 For use research use as animal Food FSA900 Foods Supplements -For Personal use FSH100 Food - For Consumer use under commercial distribution (Trading) Retail or wholsale FSH200 Food -For manufacture/ commercial Processing (Manufacture/Actual Use) FSH700 Food -For Internal use in Hotels-Restaurant FSH710 Food -For Public Display or Exhibition FSH750 Food -For use in International Sports Events FSH800 Food -For Research Use FSH900 Food - For personal consumption FSH910 Food - For distribution in a natural disaster (if received gratis) FSH920 Food -For Charitable Use FSH930 Food -For use in a Diplomatic Establishment GNX100 Generic For Consumer use under commerial distribution for Trading - wholesale or retail) GNX200 Generic -For Commercial Assembly or processing (For Manufacture/Actual use) GNX300 Generic -For use as Fertilizers or soil promoters GNX600 Generic -For Repair or Refurbishing as defective or second hand goods GNX650 Generic-For Recycling or Recovery GNX680 Generic -For Disposal as waste GNX700 Generic -For Public Display or Exhibition GNX810 Generic -For Research Development (note: other than Biomedical Research) GNX815 Generic -For Medical Or Biomedical Research GNX915 Generic -For display as a Trophy (hunting or other trophy) LVA100 Live Animal -For Breeding in Captivity or Artificial Propagation LVA200 Live Animal -For Grow-Out or Increase LVA300 Live Animal -For re-introduction into the wild LVA400 Live Animal -For Immediate Slaughter LVA500 Live Animal -For use as Fertilizers or soil promoters LVA710 Live Animal -For display in Zoo LVA760 live Animal -For Circus or Travelling Exhibition or games or show LVA800 Live Animal -For Research Purposes LVA900 Live Animal -For Personal use LVA950 Live Animal -For Re Export LVP100 Live Plants For Propagation LVP400 Live Plants -For Germplasm LVP500 Live Plants -For use as Fertilizers or soil promoters LVP730 Live Plants -For a display m a Botanical Garden 19. The complete List of ISO Codes for Containers is available on the icegate website at https://www.icegate.gov.in/SWIFT/single window docs.html 20. The difficulty in the implementation of the above changes may be brought to the notice of System Managers of Custom Houses of Krishnapatnarn Port, Kakinada Port and CD, Marripalem, Guntur District. 21. It issues with the approval of the Commissioner. D. SATISH DEPUTY COMMISSIONER (Technical)