Machinery for commercial tool rooms [Chapter 84] - 092/92 - Customs -Tariff

Machinery for commercial tool rooms [Chapter 84] Notification No. 92/92-Cus. Dated 1-3-1992 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby makes the following further amendments in the notification of the Government of India in the Ministry of Finance (Department of Revenue) No. 317/87-Customs, dated the 17th September, 1987, namely :- In the Table annexed to the said notification, against S. No. (vii), in column (2),- (a) for item No. 14 and the entry relating thereto, the following item No. and the entry shall be substituted, namely :- "14. Precision Surface Grinding machine for Tool Room with longitudinal and traverse accuracy achievable over full working range of 0.005 mm per metre"; (b) for item No. 15 and the entry relating thereto, the following item No. and the entry shall be substituted, namely :- "15. Profile Projector with coordinate table 200 x 160 mm and above with accuracy 5 micron and better with or without microprocessor and printout"; (c) for item No. 16 and the entry relating thereto, the following item No. and the entry shall be substituted, namely :- "16. Single Spindle Die-Sinking/Copy milling with or without CNC with milling Spindle diameter 100 mm and above and minimum table load of 2 tonnes"; and (d) for item No. 17 and the entry relating thereto, the following item No. and the entry shall be substituted, namely :- "17. Spark Erosion Machine 3 Axis and above NC/CNC, positioning accuracy plus/minus 0.005 mm repeatability plus/minus 0.003 mm".