9911796707
TMI BlogAmendments to Notification No. 317/87-Cus. [Chpater 84]X X X X Extracts X X X X X X X X Extracts X X X X ..... i) against Sl. No. (i), in column (2), items 10, 16, 26 and 45 and entries relating thereto shall be omitted; (ii) against Sl. No. (ii), in column (2), - (a) items 10, 13, 23, 25, 27 and 34 and entries relating thereto shall be omitted; and (b) after item 36 and the entry relating thereto, the following items and entries shall be inserted, namely :- "37. Floor type machining centre, travelling column type with table size of 1500 X 1500 MM and above. 38. Horizontal machine centres above 1500 MM x 1500 MM table traverses 39. Moving column machining centre with universal head and CNC. 40. CNC automatic lathe - 4 axis and above sliding headstock, twin turret, bar size 32 dia MM (Max.) 41. Tool room high precision turning and scr ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ate less than 0.5% and surface finish better than 0.001 R max. 58. CNC laser/plasma cutting and profiling machine."; (iii) against Sl. No. (iii), in column (2), item 13 and the entry relating thereto shall be omitted; (iv) against Sl. No. (iv), in column (2), - (a) items 2 and 3 and entries relating thereto shall be omitted; and (b) for item 14 and the entry relating thereto, the following item and the entry shall be substituted, namely :- "14. Horizontal precision forging machine (long forging machine)."; (v) against Sl. No. (v), in column (2), items 8, 9 and 13 and entries relating thereto shall be omitted; (vi) against Sl. No. (vi), in column (2),- (a) item 31 and the entry relating thereto shall be omitted; and (b) a ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nt for brazing drill rods of diameter 25 to 45 MM and lengths 400 to 4800 MM, including automatic controller for heating temperature time, flux dispenser and joint thickness controller but without induction heating source. 75. Hydrogen atmosphere pusher/rotary type high temperature reduction furnace with or without automatic loading and unloading devices and with or without hydrogen recycling/preheating system. 76. Vacuum/atmosphere controlled furnace for sintering with or without programming facility. 77. Programmable with controlled temperature and atmosphere, furnace for pressure sintering of cemented carbide products with pressure upto 200 bars, temperature upto 2200°C and fully programmed cycles and safety devices with gas reco ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... esses/hot press with resistant or induction heating. 94. PCD grinding machine with combination of rotary EDM and conventional grinding. 95. Auto mould filling stripping attachment for presses for manufacture of bonded abrasives. 96. Fuel efficient kiln combustion system for firing of bonded abrasives viz., systems consisting of high velocity burners, blowers, mechnical valve gear fuel/air control valves and control instrumentation for fully automatic operation of batch type fuel-efficient kilns for firing of bonded abrasives. 97. Automatic microprocessor kiln control system for fuel efficient firing of bonded abrasives. 98. Auto metal bonding machine for manufacture of mounted point grinding wheels. 99. Grinding machine to fin ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 5, 18, 23, 34, 35 and 36 and entries relating thereto shall be omitted; (b) for item 10 and the entry relating thereto, the following item and the entry shall be substituted, namely :- "10. High pressure continuous moulding machine above 10 kgs per cm 2 /line/system with or without flasks."; and (c) after item 39 and the entry relating thereto, the following items and entries shall be inserted, namely :- "40. Thread/worm milling machine. 41. Twin spindle auto chucker with CNC swing 245 mm above. 42. High speed pattern table size 1000 x 1400 mm and above. 43. Angular wheel head cylindrical grinder for 0.002 mm face out and run out. 44. Bore gauge electronic with digital display dia. 15 to 120 mm range. 45. Plasma coating ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
