Gents Leather Half Boots - Standards of Input Output Norms (SION) - G. Leather Products

1 [G9 Gents Leather Half Boots 1 Pair 1 a) Synthetic lining 3.75 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (PU/ Neoprene/ latex) 40.00 gms d) Shoe Finishes (Polish) 07.00 gms e) Shoe finishes (Spray) 15.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 50 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 01.1 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 11 gms m) Unit sole with or without heel OR Net + 1% wastage 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipated silica 114 gms (iii) Elasto polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net +1 % wastage o) Shoe-Lace Net +1 % wastage p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net +5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net To Net 7 Steel/ Carbon Toe Cap Net To Net 8 Decoration items Reflectors 0.052 sq.mtr 9 Webbing Tape 1.7 mtr 10 Wool Lining 0.3 sq.mtr 11 Welt Net to Net 12 Midsole Net to Net 13 Sole Welt 1.4 mtr 14 Unit Box 1 set 15 Tissue Paper 2 nos 16 Hang Tag Net To Net 17 Conduction Thread 18 mtr 18 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.80 sq.ft If Synthetic lining not asked for 8.25 sq.ft full insole socks synthetic not asked for 4.95 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.40 sq.ft Note: 1. Antioxidants shall be restricted upto 2% of weight of Natural/ Synthetic Rubber. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue /wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 18 above will not be allowed. N ote: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.17 sqm.tr Waterproof tape 2.5 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr ] ***************** NOTES:- 1. Substituted vide Public Notice No. 30/2023 dated 31-08-2023 before it was read as, G9 Gents Leather Half Boots 1 Pair 1 a) Synthetic lining 3.75 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (PU/ Neoprene/ latex) 40.00 gms d) Shoe Finishes (Polish) 07.00 gms e) Shoe finishes (Spray) 15.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 50 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 01.1 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 11 gms m) Unit sole with or without heel OR Net to Net Per Kg. of P.U. Sole 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment ppaste 31 gms (v) Release Agent OR 45 gms Per Kg. of Rubber Sole m) (i) Natural/Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipated silica 114 gms (iii) Elasto polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net to Net o) Shoe-Lace Net to Net p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards 1 No per 7500 Pairs b) Binding Guage 1 No per 10000 Pairs c) Industrial sewing machine needles/ hammer needle 40 Pcs per 1000 Pairs d) Bell/ skiving knives 1 No per 2250 Pairs e) Band knives for splitting M/c. 1 No per 2250 Pairs f) Grinding wheels 2 Nos per 1000 Pairs g) Feed Rollers 1 No per 1000 Pairs h) Set of cutting dies of various designs. 1 No Per 1000 Pairs i) Silver marking pencils/ pens/ refills 1 No Per 1000 Pairs j) Abrasive paper/ emery paper/ belts/ cup shapes 1 Sq.mtr Per 150 Pairs k) Brushes of all types 2 Pcs Per 1000 Pairs l) Sea Sponge 2 Pcs Per 1000 Pairs m) Plastic shoe last 4 Pairs Per 1000 Pairs n) Heating elements 1 No Per 1000 Pairs o) Cutters and trimmers (all types) for footwear making 1 No Per 500 Pairs Note:1. Antioxidants shall be restricted upto 2% of weight of Natural/ Synthetic Rubber. Note: 2 For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather and Leather Products', finished leather required perpair is (i) 8 sq.ft. if item 1(a) 1(b) are not asked for, (ii) 7.5 sq.ft. if item 1(a) is not asked for, (iii) 4.5 sq.ft if item 1(b) is not asked for, and (iv) 4.00 sq.ft. if 1(a) 1(b) are asked for.