Ladies Leather Half Boot - Standards of Input Output Norms (SION) - G. Leather Products

1 [G23 Ladies Leather Half Boot 1 Pair 1 a) Synthetic lining 3.25 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 6.00 gms e) Shoe finishes (Spray) 12.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 40 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.90 mtrs j) Sheet for making insole 0.040 sq mtr k) Nails/ tacks 12 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.008 kg m) Unit sole with or without heel OR 1 Pair 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Calalyst 53 gms (iv) Pigment Paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net + 1% wastage o) Shoe-Lace Net + 1% wastage p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) Net +1 % wastage r) Eyelets Net + 1% wastage s) Metallic fittings Net + 1% wastage t) Zip fastners Net + 1% wastage u) Elastic Net + 1% wastage v) Velcro-tape Net + 1% wastage 2 a) Clicking board As per note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to Net 7 Steel/ Carbon Toe Cap Net to Net 8 Decoration items Reflectors 0.044 sq.mtr 9 Webbing Tape 1.36 mtr 10 Design Components 1 Set 11 Wool Lining 0.255 sq.mtr 12 Welt Net to Net 13 Midsole Net to Net 14 Sole Welt 1.2 mtr 15 Unit Box 1 set 16 Tissue Paper 2 nos 17 Hang Tag Net to Net 18 Conduction Thread 12 mtr 19 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.14 sq.ft. If Synthetic lining not asked for 7.70 sq.ft. full insole socks synthetic not asked for 4.57 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.13 sq.ft. Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 19 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.14 sqm.tr Waterproof tape 2.15 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr ] ***************** NOTES:- 1. Substituted vide Public Notice No. 30/2023 dated 31-08-2023 before it was read as, G23 Ladies Leather Half Boot 1 Pair 1 a) Synthetic lining 3.25 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 6.00 gms e) Shoe finishes (Spray) 12.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 40 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.90 mtrs j) Sheet for making insole 0.040 sq mtr k) Nails/ tacks 12 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.008 kg m) Unit sole with or without heel OR 1 Pair Per Kg. of P.U. Sole 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Calalyst 53 gms (iv) Pigment Paste 31 gms (v) Release Agent OR 45 gms Per Kg. of Rubber Sole m) (i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net to Net o) Shoe-Lace Net to Net p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) Net to Net r) Eyelets Net + 1% wastage s) Metallic fittings Net + 1% wastage t) Zip fastners Net + 1% wastage u) Elastic Net + 1% wastage v) Velcro-tape Net + 1% wastage 2 a) Clicking board 1 No per 7500 Pairs b) Binding Guage 1 No per 10000 Pairs c) Industrial sewing machine needles/ hammer needle 40 Pcs per 1000 Pairs d) Bell/ skiving knives 1 No per 2250 Pairs e) Band knives for splitting M/c. 1 No per 2250 Pairs f) Grinding wheels 2 Nos per 1000 Pairs g) Feed Rollers 1 No per 1000 Pairs h) Set of cutting dies of various designs. 1 No Per 1000 Pairs i) Silver marking pencils/ pens/ refills 1 No Per 1000 Pairs j) Abrasive paper/ emery paper/ belts/ cup shapes 1 Sq.mtr Per 150 Pairs k) Brushes of all types 2 Pcs Per 1000 Pairs l) Sea Sponge 2 Pcs Per 1000 Pairs m) Plastic shoe last 4 Pairs Per 1000 Pairs n) Heating elements 1 No Per 1000 Pairs o) Cutters and trimmers (all types) for footwear making 1 No Per 500 Pairs Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2- 2. For requirement of Chemicals, finished Leather required per pair is (i) 7.4 sq.ft. if item 1(a) and 1(b) is not asked for, (ii) 7 sq. ft. if item1(a) is not asked for (iii) 4.15 sq.ft. if item 1(b) is not asked for, and (iv) 3.75 sq.ft. if 1(a) 1(b) are asked for.