9911796707
TMI BlogFourth ScheduleX X X X Extracts X X X X X X X X Extracts X X X X ..... d rupees per metric tonne. (ii) Wrought angles, shapes and sections of copper. Six thousand and three hundred rupees per metric tonne. (4) Castings, not otherwise specified. Five thousand and six hundred rupees per metric tonne. (5) Copper wire. Twenty per cent. ad valorem. (6) Wrought plates, sheets, blanks (including circles) and strips of copper. Explanation. In this sub-Item, "blank" means a piece of plate, sheet or strip, in any shape, including a circle, prepared for subsequent fabrication. Six thousand and three hundred per metric tonne. (7) Copper foil. Six thousand and three hundred rupees per metric tonne. (8) Copper powders (excluding content, copper) and flakes. Twenty per cent. ad valorem. (9) Pipes and tubes of copper. Twenty-eight per cent. ad valorem. (10) Shells and blanks for pipes and tubes; hollow sections of copper. Explanation. -In this Item,- (i) "waste and scrap" means waste and scrap metal fit only for the recovery of metal by remelting or for use in the manufacture of chemicals, but does not include slag, dross, scalings, ash and other cuprous residues; (ii) "wrought bars and rods (including wire rods)" m ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ipes and tubes" means a hollow product of uniform cross-section and wall thickness having a continuous periphery produced by drawing, casting or extrusion process; (xi) "shells and blanks" means a hollow cylinder produced by extrusion, rotary piercing or casting for subsequent drawing into pipe or tube; (xii) "hollow section" means a section which 18 normally extruded, drawn or cast, the cross-section of which completely encloses a void or voids.'; Twenty-eight per cent. ad valorem. (ii) for Item No. 26B, the following Item shall be substituted, namely:- '26B. ZINC AND PRODUCTS THEREOF "Zinc" shall include any alloy in which zinc predominates by weight over each of the other metals. (1) Unwrought zinc in any form including blocks, plates, ingots, cakes, bars, billets, hard or soft slabs, cathodes, anodes, pellets, spelter and broken zinc. Three thousand two hundred and seventy-five rupees per metric tonne. (2) Waste and scrap of zinc. Three thousand two hundred and seventy-five rupees metric tonne. (3) Wrought bars, rods (including wire rods), angles, shapes and sections of zinc; zinc wire. (i) Wrought bars and rods (including ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... exceeds 6 millimetres; (v) "plate" means a flat product cut to length, whose thickness exceeds 10 millimetres and width exceeds 500 millimetres; (vi) "sheet" means a flat product whose thickness exceeds 0.15 millimetre but does not exceed 10 millimetres, and width exceeds 300 millimetres; (vii) "strip" means a flat product, generally not cut to length, whose thickness exceeds 0.15 millimetre but does not exceed 10 millimetres, and width does not exceed 500 millimetres; (viii) "foil" means a flat product whose thickness (excluding any backing) not exceeding 0.15 millimetre, whether or not embossed, cut to shape, perforated, coated, printed or backed with paper or other reinforcing material; (ix) "powders and flakes" means all types of powders and flakes, including dust, but excluding powders and flakes prepared as colours, pigments, paints or the like; (x) "pipes and tubes" means a hollow product of uniform cross-section having a continuous periphery produced by drawing, casting or extrusion process; (xi) "hollow-section" means a section which is normally extruded, drawn or cast and the cross-section of ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cts of solid section, of which the width or the maximum cross-sectional dimension exceeds 6 millimetres and which, if they are flat, have a thickness exceeding one-tenth of the width; or (b) any cast or sintered products, of the same forms and dimensions which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of any article or product falling under any other Item; (iii) "wrought angles, shapes and sections" means (a) any extruded, rolled, drawn or forged products of solid section (other than round, rectangular, square and hexagonal), of which the width or the maximum cross-sectional dimension exceeds, 6 millimetres and which, if they are flat, have a thickness exceeding one-tenth of the width; or (b) any cast оr sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of any article or product falling under any other Item; (iv) "wire" means rolled, extruded or drawn product, of solid and ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
