Stainless Steel Wires (from melting scrap) - Standards of Input Output Norms (SION) - C. Engineering Products

C523 Stainless Steel Wires (from melting scrap) 1000 kgs 1 Non alloy steel melting scrap 660 kgs 2 Graphite Electrode 6 kgs 3 Cored wire/ lumps/ powder of Calcium Silicide (CaSi) 1 kg 4 Rolls/ Tungston carbide rings for rolling mills 1.77 kgs 5 Copper Mould 0.0007 Nos 6 Silico Manganese OR Qty in Kgs as in Formula (i) of Note 4 6 a) Ferro Silicon Qty in Kgs as in Formula (ii) of Note 4 b) Ferro Manganese Qty in Kgs as in Formula (iii) of Note 4 7 Refractory comprising of : 25 kg a) Zirconia/ magnesia nozzles 25 kg b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper head/ shrouds 25 kg c) Porous plugs/ Seat blocks/ sleeves/ slidegate plates 25 kg d) Direct bonded basic bricks 25 kg e) EBT Tubes/ mass/ bricks 25 kg f) Monolithic/ gunning/ ramming mass/ castables 25 kg g) Dolomite/ magnesia carbon bricks 25 kg 8 Other ferro alloy(s) (Including charge/ ferro nickel charge chrome ) provided the alloying elements is actually present in the export product Qty in Kgs, in respect of each ferro alloy as in formula iv of note 4 9 Casting powder 2 kgs 10 Saw/ shear blade 0.01 kg 11 Copper scrap/ Copper Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the export product) 0.04 kg 12 Furnace oil (For captive power plant) 70 kgs 13 Furnace oil for oil fired reheating furnace in the rolling mill 50 kgs 14 Furnace oil for ladle heating 6 kgs 15 Lubricant (for captive power plant) 0.65 kgs 16 Low silica lime stone 100 kgs 17 Cored wire/ scrap/ ingots of aluminium 1 kg 18 Cored wire of lead/ lead shots in case of export of lead bearing free cutting steel only 2.5 kgs 19 Raw Petroleum coke 5 kgs 20 Ceramic coated lancing Pipe 1 No 21 Temperature tips 0.5 No. 22 Sampler tips 0.25 No. 23 a) Dry drawing lubricant/ coating 9 kg b) Wire drawing soap 8 kg c) Tungsten carbide dies 1 No d) Wet drawing lubricant/ coating 4 kgs e) Diamond/ Compax dies 4 Nos f) Plastic Bobbins/ spools 300 Nos Note:1. The above norm is applicable only if the export product(s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of Misc. items at sl.no. 2,4,5,7(a) to 7(g),19,20,21,22,23(a) to 23(e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl. No. 2 will not be allowed. 4. (i) 5.50 X(mean average of % Manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content In Steel)/(mean average of % Silicon content in ferro silicon) (iii) 1100 X (mean average of % Manganese content in steel)/(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel) /(mean average of % alloy content in respective Ferro alloy) 5. Items at Sl.No 23(d) to 23(f) would be allowed against export of wire below 1mm dia only.