Modification of SION C-469 & Fixation of two new SIONs - DGFT - 33 (RE: 2012)/2009-2014

(To be published in the Gazette of India Extraordinary) (Part-I- Section-1) Government of India Ministry of Commerce Industry Department of Commerce Directorate General of Foreign Trade Public Notice No: 33 (RE: 2012)/2009-2014 New Delhi: Dated: 30 th November, 2012 Subject: Modification of SION C-469 Fixation of two new SIONs In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2009-14 and Paragraph 1.1 of the Handbook of Procedures (Vol.1), the Directorate General of Foreign Trade hereby notifies the following in Handbook of Procedure Vol.II (SION Book) :- 2. The existing entry at SION C-469 is as follows:- SION Export Product Quantity Import Items Quantity C-469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/ hoops Strips/ Wide Coils having Zinc coating of 180 gm per Sq.m @40 Sq.M per litre Primer, 20 Sq.M per litre as Top Coat and 25 Sq.Mtr. Per litr. As Backer given in Engineering Table 1. 1000 kg 1. Non Alloy Hot Rolled Steel Sheets/ Strips/ Wide Coils 1130 kgs. 2. Rolling Mill Rolls 1.25 kgs. 3. Rolling Oil 0.35 kg. 4. Pickling Oil 0.45 kg. 5. Steel Strapping 2.0 kgs. 6. VCI Rusto - Paper 5.0 Sq.mtrs. 7. Zinc * 8. Guard Film * 9. Paints (Ltrs.) * (a) Primer (b) Tap Coat (c) Backer *Note : While the quantity of item nos. 1 to 6 will remain the same for all thickness of the product, the quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group. 3. SION at S. No. C-469 is now modified as under:- SION Export Product Quantity Import Items Quantity C-469 Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/Hoops Strips/Wide Coils (Plain/Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kgs. 1. (a) Cold Rolled Galvanised Non Alloy Steel Strips/Wide Coils Or (a) 1.01 x Cold Rolled Galvanised Steel content as specified in Engg. Table-1 A Or (b) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/ Wide Coils Or (b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1 B Or (c) Hot Rolled Non Alloy Steel Strips/Wide Coils (c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1 B 2. Paint-Primer (litre) As per Engg. Table-1A 3. Paint-Back Coat (litre) As per Engg. Table-1A 4. Paint-Top Coat (litre) As per Engg. Table-1A 5. Zinc Slab/ Ingots (kg) 1.1 x Zinc content as specified in Engg. Table-1C 6. Rolling Mill Rolls 1.25 Kg. 7. Rolling Oil 0.35 Kg. 8. Pickling Oil 0.45 Kg. 9. Steel Strappings/ Galvanised Plain Sheets for packing As per packing Policy 10. VCI Rusto Paper 5.0 Sq.Mtr. 11. Guard Film (kg.) As per Engg. Table-1A 12. Applicator Rolls 0.13 Kg. Note: (i) Import Item No. 5 will be allowed, only when import item no. 1(b) or 1(c) is imported. (ii) Import Item Nos. 6 7 will be allowed, only when import item no. 1(c) is imported (iii) Import Item No. 8 will be allowed, only when import item no. 1(b) or 1(c) is imported 4. New SION at Serial number C-2054 shall be as under:- SION Export Product Quantity Import Items Quantity C-2054 Cold Rolled Un-Galvanised Colour Coated Non Alloy Steel Sheets/Hoops Strips/Wide Coils having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kg. 1. (a) Cold Rolled Full Hard/Close Annealed Non Alloy Steel Strips/Wide Coils Or (a) 1.01 x Cold Rolled Steel content as specified in Engg. Table-1D Or (b) Hot Rolled Non Alloy Steel Strips/Wide Coils (b) 1.10 x Cold Rolled Steel content as specified in Engg. Table-1D 2. Paint-Primer (litre ) As per Engg. Table-1D 3. Paint-Back Coat (litre) As per Engg. Table-1D 4. Paint-Top Coat (litre ) As per Engg. Table-1D 5. Rolling Mill Rolls 1.25 Kg. 6. Rolling Oil 0.35 Kg. 7. Pickling Oil 0.45 Kg. 8. Steel Strappings/Galvanised Plain Sheets for Packing As per Packing Policy 9. VCI Rusto Paper 5.0 Sq.Mtr. 10. Guard Film (kg.) As per Engg. Table-1D 11. Applicator Rolls 0.13 Kg. Note: (i) Import Item Nos. 5 6 will be allowed, only when import item no. 1(b) is imported. 5. New SION at Serial number C-2055 shall be as under:- SION Export Product Quantity Import Items Quantity C-2055 Cold Rolled Zinc (43.5%) Aluminium Silicon (56.5%) Alloy Coated Colour Coated Non Alloy Steel Sheets/ Strips/Wide Coils (Plain/ Corrugated) having coating thickness of Primer 4-10 Micron, Backer 4-14 Micron and Top Coat 12-28 Micron 1000 Kg. 1. (a) Cold Rolled Zinc (43.5%) Aluminium-Silicon (56.5%) Alloy Coated Non Alloy Steel Strips/ Wide Coils Or (a) 1.01 x Cold Rolled Zinc (43.5%) Aluminium-Silicon (56.5%) Alloy Coated Steel content as specified in Engg. Table-1E Or (b) Cold Rolled Non Alloy Steel Strips/Wide Coils Or (b) 1.05 x Cold Rolled Steel content as specified in Engg. Table-1F Or (c) Hot Rolled Non Alloy Steel Strips/ Wide Coils (c) 1.118 x Cold Rolled Steel content as specified in Engg. Table-1F 2. Paint-Primer (litre) As per Engg. Table-1E 3. Paint-Back Coat (litre) As per Engg. Table-1E 4. Paint-Top Coat (litre) As per Engg. Table-1E 5. Zinc Slab/ Ingots (kg.) 1.15 x 0.435 x Zinc-AL-SI content as specified in Engg. Table-1G 6. Aluminium Silicon Alloy Slab/Ingots (kg.) 1.15 x 0.565 x Zinc-AL-SI content as specified in Engg. Table-1G 7. Rolling Mill Rolls 1.25 Kg. 8. Rolling Oil 0.35 Kg. 9. Pickling Oil 0.45 Kg. 10. Steel Strappings/ Galvanised Plain Sheets for packing As per Packing Policy 11. VCI Rusto Paper 5.0 Sq.Mtr. 12. Guard Film (kg.) As Per Engg. Table-1E 13. Applicator Rolls 0.13 Kg. Note: (i) Import Item Nos. 5 6 will be allowed, only when import item no. 1(b) or 1(c) is imported (ii) Import Item Nos. 7 8 will be allowed, only when import item no. 1(c) is imported (iii) Import Item No. 9 will be allowed, only when import item no.1 (b) or 1(c) is imported. 6. The existing Engineering Table 1 in Handbook of Procedures Vol.II is hereby deleted and is substituted by Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which are annexed to this Public Notice. 7. Effect of Public Notice:- (i) Existing SION C-469 has been modified. Non Alloy Cold Rolled Steel is added as an input. Based upon the thickness of the export product, quantity of corresponding inputs has been prepared in tabular form as mentioned in Engineering Tables 1A, 1B and 1C. (ii) Two new SIONs are notified for export products Cold Rolled colour coated non alloy steel sheets and Cold Rolled Zinc Aluminium Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets . (iii) Engineering Table 1 is substituted by comprehensive Engineering Tables 1A, 1B, 1C, 1D, 1E, 1F and 1G which denote the export product and corresponding inputs. (Anup K. Pujari ) Director General of Foreign Trade E-mail: [email protected] (Issued from File No. 01/81/162/246/AM13/DES-II) ENGINEERING TABLE-1A (PPGI) Export Product: Cold Rolled Galvanised Colour Coated Non Alloy Steel Sheets/hoops strips/ wide coils )(Plain / Corrugated) Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR Galvanised) (kgs a b Primer (litre) Back Coat (litre) Top Coat (litre) 1 0.10 0.12 38.218 46.066 81.895 66.93 904.058 2 0.13 0.15 27.731 33.426 59.423 48.56 930.384 3 0.16 0.18 21.760 26.229 46.629 38.11 945.373 4 0.19 0.21 17.905 21.582 38.368 31.36 955.051 5 0.22 0.24 15.210 18.334 32.593 26.64 961.816 6 0.25 0.27 13.220 15.935 28.329 23.15 966.811 7 0.28 0.3 11.691 14.092 25.052 20.47 970.651 8 0.31 0.33 10.479 12.631 22.455 18.35 973.694 9 0.34 0.36 9.494 11.444 20.345 16.63 976.165 10 0.37 0.39 8.679 10.461 18.598 15.20 978.212 11 0.40 0.42 7.993 9.634 17.127 14.00 979.935 12 0.43 0.45 7.407 8.928 15.872 12.97 981.406 13 0.46 0.48 6.901 8.318 14.788 12.09 982.676 14 0.49 0.51 6.460 7.787 13.843 11.31 983.783 15 0.52 0.54 6.072 7.319 13.011 10.63 984.757 16 0.55 0.57 5.728 6.904 12.274 10.03 985.621 17 0.58 0.6 5.420 6.534 11.615 9.49 986.392 18 0.61 0.63 5.145 6.201 11.024 9.01 987.085 19 0.64 0.66 4.895 5.901 10.490 8.57 987.711 20 0.67 0.69 4.669 5.628 10.005 8.18 988.278 21 0.70 0.72 4.463 5.379 9.564 7.82 988.796 22 0.73 0.75 4.274 5.152 9.159 7.49 989.270 23 0.76 0.78 4.101 4.943 8.787 7.18 989.705 24 0.79 0.81 3.941 4.750 8.445 6.90 990.107 25 0.82 0.84 3.793 4.572 8.128 6.64 990.478 26 0.85 0.87 3.656 4.407 7.834 6.40 990.823 27 0.88 0.9 3.528 4.253 7.560 6.18 991.143 28 0.91 0.93 3.409 4.109 7.305 5.97 991.442 29 0.94 0.96 3.298 3.975 7.067 5.78 991.721 30 0.97 0.99 3.194 3.850 6.844 5.59 991.983 31 1.00 1.02 3.096 3.732 6.634 5.42 992.228 32 1.03 1.05 3.004 3.621 6.437 5.26 992.459 33 1.06 1.08 2.917 3.516 6.251 5.11 992.677 34 1.09 1.11 2.835 3.418 6.076 4.97 992.882 35 1.12 1.14 2.758 3.324 5.910 4.83 993.077 36 1.15 1.17 2.685 3.236 5.753 4.70 993.260 37 1.18 1.2 2.615 3.152 5.604 4.58 993.435 38 1.21 1.23 2.549 3.073 5.463 4.46 993.600 39 1.24 1.26 2.486 2.997 5.328 4.35 993.758 40 1.27 1.29 2.427 2.925 5.200 4.25 993.908 41 1.30 1.32 2.370 2.857 5.078 4.15 994.051 42 1.33 1.35 2.316 2.791 4.962 4.06 994.187 43 1.36 1.38 2.264 2.729 4.851 3.96 994.317 44 1.39 1.41 2.214 2.669 4.745 3.88 994.442 45 1.42 1.44 2.167 2.612 4.643 3.79 994.561 46 1.45 1.47 2.121 2.557 4.545 3.71 994.675 47 1.48 1.5 2.078 2.504 4.452 3.64 994.784 48 1.51 1.53 2.036 2.454 4.362 3.57 994.890 49 1.54 1.56 1.996 2.405 4.276 3.49 994.990 50 1.57 1.59 1.957 2.359 4.193 3.43 995.087 51 1.60 1.62 1.920 2.314 4.114 3.36 995.181 ENGINEERING TABLE-1B (PPGI) Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops Strips/Wide Coils (Plain / Corrugated) Sl. No. Export Product Thickness Range (mm) CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m 2 a b 30-49 50-69 70-89 90-109 110-129 130-149 150-169 1 0.10 0.12 843.0 811.0 778.8 746.4 713.8 681.0 648.0 2 0.13 0.15 885.4 862.1 838.8 815.3 791.8 768.1 744.3 3 0.16 0.18 909.7 891.5 873.2 854.8 836.4 817.8 799.3 4 0.19 0.21 925.6 910.5 895.5 880.4 865.2 850.0 834.8 5 0.22 0.24 936.7 923.9 911.1 898.3 885.4 872.5 859.6 6 0.25 0.27 944.9 933.8 922.7 911.5 900.4 889.2 877.9 7 0.28 0.30 951.2 941.4 931.6 921.7 911.8 902.0 892.1 8 0.31 0.33 956.2 947.4 938.6 929.8 921.0 912.1 903.2 9 0.34 0.36 960.3 952.4 944.4 936.4 928.4 920.3 912.3 10 0.37 0.39 963.7 956.4 949.1 941.8 934.5 927.2 919.8 11 0.40 0.42 966.6 959.9 953.1 946.4 939.7 932.9 926.2 12 0.43 0.45 969.0 962.8 956.6 950.3 944.1 937.8 931.6 13 0.46 0.48 971.1 965.3 959.5 953.7 947.9 942.1 936.3 14 0.49 0.51 973.0 967.5 962.1 956.7 951.2 945.8 940.3 15 0.52 0.54 974.6 969.5 964.4 959.3 954.2 949.0 943.9 16 0.55 0.57 976.0 971.2 966.4 961.6 956.7 951.9 947.1 17 0.58 0.60 977.3 972.7 968.2 963.6 959.1 954.5 949.9 18 0.61 0.63 978.5 974.1 969.8 965.5 961.1 956.8 952.5 19 0.64 0.66 979.5 975.4 971.3 967.1 963.0 958.9 954.8 20 0.67 0.69 980.4 976.5 972.6 968.7 964.7 960.8 956.9 21 0.70 0.72 981.3 977.5 973.8 970.0 966.3 962.5 958.8 22 0.73 0.75 982.1 978.5 974.9 971.3 967.7 964.1 960.5 23 0.76 0.78 982.8 979.4 975.9 972.5 969.0 965.6 962.1 24 0.79 0.81 983.5 980.2 976.9 973.5 970.2 966.9 963.6 25 0.82 0.84 984.1 980.9 977.7 974.5 971.3 968.1 965.0 26 0.85 0.87 984.7 981.6 978.5 975.5 972.4 969.3 966.2 27 0.88 0.90 985.2 982.2 979.3 976.3 973.3 970.4 967.4 28 0.91 0.93 985.7 982.8 980.0 977.1 974.2 971.4 968.5 29 0.94 0.96 986.2 983.4 980.6 977.9 975.1 972.3 969.5 30 0.97 0.99 986.6 983.9 981.2 978.6 975.9 973.2 970.5 31 1.00 1.02 987.0 984.4 981.8 979.2 976.6 974.0 971.4 32 1.03 1.05 987.4 984.9 982.4 979.8 977.3 974.8 972.2 33 1.06 1.08 987.8 985.3 982.9 980.4 978.0 975.5 973.0 34 1.09 1.11 988.1 985.7 983.3 981.0 978.6 976.2 973.8 35 1.12 1.14 988.4 986.1 983.8 981.5 979.2 976.8 974.5 36 1.15 1.17 988.7 986.5 984.2 982.0 979.7 977.5 975.2 37 1.18 1.20 989.0 986.8 984.6 982.4 980.2 978.0 975.8 38 1.21 1.23 989.3 987.2 985.0 982.9 980.7 978.6 976.4 39 1.24 1.26 989.6 987.5 985.4 983.3 981.2 979.1 977.0 40 1.27 1.29 989.8 987.8 985.7 983.7 981.7 979.6 977.6 41 1.30 1.32 990.1 988.1 986.1 984.1 982.1 980.1 978.1 42 1.33 1.35 990.3 988.3 986.4 984.4 982.5 980.5 978.6 43 1.36 1.38 990.5 988.6 986.7 984.8 982.9 981.0 979.1 44 1.39 1.41 990.7 988.8 987.0 985.1 983.3 981.4 979.5 45 1.42 1.44 990.9 989.1 987.3 985.4 983.6 981.8 980.0 46 1.45 1.47 991.1 989.3 987.5 985.8 984.0 982.2 980.4 47 1.48 1.50 991.3 989.5 987.8 986.0 984.3 982.5 980.8 48 1.51 1.53 991.5 989.7 988.0 986.3 984.6 982.9 981.2 49 1.54 1.56 991.6 989.9 988.3 986.6 984.9 983.2 981.6 50 1.57 1.59 991.8 990.1 988.5 986.9 985.2 983.6 981.9 51 1.60 1.62 991.9 990.3 988.7 987.1 985.5 983.9 982.3 ENGINEERING TABLE-1B (PPGI) Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops Strips/Wide Coils (Plain / Corrugated) Sl. No. Export Product Thickness Range (mm) CR Content (kgs) for different thickness of export product and different Zinc coating class in gms/m 2 a b 170-189 190-209 210-229 230-249 250-269 270-289 290-309 1 0.10 0.12 614.8 581.3 547.7 513.8 479.7 445.4 410.9 2 0.13 0.15 720.4 696.4 672.3 648.1 623.8 599.3 574.8 3 0.16 0.18 780.6 761.9 743.1 724.3 705.4 686.4 667.3 4 0.19 0.21 819.5 804.1 788.8 773.3 757.9 742.3 726.8 5 0.22 0.24 846.6 833.7 820.6 807.6 794.5 781.4 768.2 6 0.25 0.27 866.7 855.4 844.1 832.8 821.5 810.1 798.7 7 0.28 0.30 882.1 872.2 862.2 852.2 842.2 832.2 822.1 8 0.31 0.33 894.3 885.4 876.5 867.6 858.6 849.7 840.7 9 0.34 0.36 904.3 896.2 888.1 880.0 872.0 863.8 855.7 10 0.37 0.39 912.5 905.1 897.8 890.4 883.0 875.6 868.2 11 0.40 0.42 919.4 912.6 905.9 899.1 892.3 885.4 878.6 12 0.43 0.45 925.3 919.0 912.8 906.5 900.2 893.9 887.6 13 0.46 0.48 930.4 924.6 918.7 912.9 907.0 901.1 895.3 14 0.49 0.51 934.9 929.4 923.9 918.4 913.0 907.5 902.0 15 0.52 0.54 938.8 933.6 928.5 923.4 918.2 913.0 907.9 16 0.55 0.57 942.2 937.4 932.6 927.7 922.8 918.0 913.1 17 0.58 0.60 945.3 940.8 936.2 931.6 927.0 922.4 917.8 18 0.61 0.63 948.1 943.8 939.4 935.1 930.7 926.4 922.0 19 0.64 0.66 950.6 946.5 942.4 938.2 934.1 929.9 925.8 20 0.67 0.69 952.9 949.0 945.0 941.1 937.1 933.2 929.2 21 0.70 0.72 955.0 951.2 947.5 943.7 939.9 936.1 932.3 22 0.73 0.75 956.9 953.3 949.7 946.1 942.5 938.8 935.2 23 0.76 0.78 958.6 955.2 951.7 948.3 944.8 941.3 937.8 24 0.79 0.81 960.3 956.9 953.6 950.3 946.9 943.6 940.3 25 0.82 0.84 961.8 958.6 955.4 952.1 948.9 945.7 942.5 26 0.85 0.87 963.1 960.1 957.0 953.9 950.8 947.7 944.6 27 0.88 0.90 964.4 961.4 958.5 955.5 952.5 949.5 946.5 28 0.91 0.93 965.6 962.7 959.9 957.0 954.1 951.2 948.3 29 0.94 0.96 966.7 964.0 961.2 958.4 955.6 952.8 950.0 30 0.97 0.99 967.8 965.1 962.4 959.7 957.0 954.3 951.6 31 1.00 1.02 968.8 966.2 963.6 960.9 958.3 955.7 953.1 32 1.03 1.05 969.7 967.2 964.6 962.1 959.6 957.0 954.5 33 1.06 1.08 970.6 968.1 965.7 963.2 960.7 958.3 955.8 34 1.09 1.11 971.4 969.0 966.6 964.2 961.8 959.4 957.1 35 1.12 1.14 972.2 969.9 967.5 965.2 962.9 960.6 958.2 36 1.15 1.17 972.9 970.7 968.4 966.1 963.9 961.6 959.3 37 1.18 1.20 973.6 971.4 969.2 967.0 964.8 962.6 960.4 38 1.21 1.23 974.3 972.1 970.0 967.8 965.7 963.5 961.4 39 1.24 1.26 974.9 972.8 970.7 968.6 966.5 964.4 962.3 40 1.27 1.29 975.5 973.5 971.4 969.4 967.3 965.3 963.2 41 1.30 1.32 976.1 974.1 972.1 970.1 968.1 966.1 964.1 42 1.33 1.35 976.7 974.7 972.7 970.8 968.8 966.9 964.9 43 1.36 1.38 977.2 975.3 973.4 971.5 969.5 967.6 965.7 44 1.39 1.41 977.7 975.8 973.9 972.1 970.2 968.3 966.5 45 1.42 1.44 978.2 976.3 974.5 972.7 970.8 969.0 967.2 46 1.45 1.47 978.6 976.8 975.0 973.2 971.5 969.7 967.9 47 1.48 1.50 979.1 977.3 975.6 973.8 972.0 970.3 968.5 48 1.51 1.53 979.5 977.8 976.0 974.3 972.6 970.9 969.2 49 1.54 1.56 979.9 978.2 976.5 974.8 973.2 971.5 969.8 50 1.57 1.59 980.3 978.6 977.0 975.3 973.7 972.0 970.4 51 1.60 1.62 980.6 979.0 977.4 975.8 974.2 972.6 970.9 ENGINEERING TABLE-1C (PPGI) Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops Strips/Wide Coils(Plain / Corrugated) Sl.No. Export Product Thickness Range (mm) Zinc Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 30-49 50-69 70-89 90-109 110-129 130-149 150-169 1 0.10 0.12 62.80 94.50 126.39 158.49 190.79 223.29 256.00 2 0.13 0.15 45.85 68.93 92.12 115.41 138.81 162.32 185.94 3 0.16 0.18 36.10 54.25 72.47 90.75 109.09 127.51 145.99 4 0.19 0.21 29.77 44.73 59.73 74.77 89.86 104.99 120.17 5 0.22 0.24 25.33 38.05 50.80 63.57 76.39 89.23 102.11 6 0.25 0.27 22.05 33.10 44.19 55.30 66.43 77.58 88.77 7 0.28 0.30 19.51 29.30 39.10 48.92 58.77 68.63 78.51 8 0.31 0.33 17.50 26.28 35.07 43.87 52.69 61.53 70.38 9 0.34 0.36 15.87 23.82 31.78 39.76 47.75 55.76 63.77 10 0.37 0.39 14.51 21.78 29.07 36.36 43.66 50.97 58.30 11 0.40 0.42 13.37 20.07 26.77 33.49 40.21 46.95 53.69 12 0.43 0.45 12.39 18.60 24.82 31.04 37.27 43.51 49.76 13 0.46 0.48 11.55 17.34 23.13 28.93 34.73 40.54 46.36 14 0.49 0.51 10.82 16.23 21.65 27.08 32.52 37.96 43.40 15 0.52 0.54 10.17 15.26 20.36 25.46 30.57 35.68 40.80 16 0.55 0.57 9.59 14.40 19.21 24.02 28.84 33.66 38.48 17 0.58 0.60 9.08 13.63 18.18 22.73 27.29 31.85 36.42 18 0.61 0.63 8.62 12.94 17.25 21.58 25.90 30.23 34.57 19 0.64 0.66 8.20 12.31 16.42 20.53 24.65 28.77 32.89 20 0.67 0.69 7.83 11.74 15.66 19.59 23.51 27.44 31.38 21 0.70 0.72 7.48 11.23 14.97 18.72 22.48 26.23 29.99 22 0.73 0.75 7.17 10.75 14.34 17.93 21.53 25.12 28.72 23 0.76 0.78 6.88 10.32 13.76 17.21 20.65 24.10 27.56 24 0.79 0.81 6.61 9.92 13.22 16.54 19.85 23.17 26.48 25 0.82 0.84 6.36 9.54 12.73 15.92 19.11 22.30 25.49 26 0.85 0.87 6.13 9.20 12.27 15.34 18.41 21.49 24.57 27 0.88 0.90 5.92 8.88 11.84 14.81 17.77 20.74 23.71 28 0.91 0.93 5.72 8.58 11.44 14.31 17.17 20.04 22.91 29 0.94 0.96 5.53 8.30 11.07 13.84 16.61 19.39 22.16 30 0.97 0.99 5.36 8.04 10.72 13.40 16.09 18.78 21.46 31 1.00 1.02 5.19 7.79 10.39 12.99 15.60 18.20 20.81 32 1.03 1.05 5.04 7.56 10.08 12.61 15.13 17.66 20.19 33 1.06 1.08 4.89 7.34 9.79 12.24 14.70 17.15 19.61 34 1.09 1.11 4.76 7.14 9.52 11.90 14.28 16.67 19.06 35 1.12 1.14 4.63 6.94 9.26 11.58 13.90 16.22 18.54 36 1.15 1.17 4.50 6.76 9.01 11.27 13.53 15.78 18.04 37 1.18 1.20 4.39 6.58 8.78 10.98 13.18 15.38 17.58 38 1.21 1.23 4.28 6.42 8.56 10.70 12.84 14.99 17.13 39 1.24 1.26 4.17 6.26 8.35 10.44 12.53 14.62 16.71 40 1.27 1.29 4.07 6.11 8.15 10.19 12.23 14.27 16.31 41 1.30 1.32 3.98 5.97 7.96 9.95 11.94 13.93 15.93 42 1.33 1.35 3.89 5.83 7.78 9.72 11.67 13.62 15.56 43 1.36 1.38 3.80 5.70 7.60 9.50 11.41 13.31 15.21 44 1.39 1.41 3.72 5.58 7.44 9.30 11.16 13.02 14.88 45 1.42 1.44 3.64 5.46 7.28 9.10 10.92 12.74 14.56 46 1.45 1.47 3.56 5.34 7.12 8.91 10.69 12.47 14.26 47 1.48 1.50 3.49 5.23 6.98 8.72 10.47 12.22 13.96 48 1.51 1.53 3.42 5.13 6.84 8.55 10.26 11.97 13.68 49 1.54 1.56 3.35 5.03 6.70 8.38 10.06 11.73 13.41 50 1.57 1.59 3.29 4.93 6.57 8.22 9.86 11.51 13.15 51 1.60 1.62 3.22 4.83 6.45 8.06 9.67 11.29 12.90 ENGINEERING TABLE-1C (PPGI) Export Product: Cold Rolled Galvanized Colour Coated Non Alloy Steel Sheets/ Hoops Strips/Wide Coils (Plain / Corrugated) Sl. No. Export Product Thickness Range (mm) Zinc Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 170-189 190-209 210-229 230-249 250-269 270-289 290-309 1 0.10 0.12 288.92 322.05 355.40 388.96 422.73 456.73 490.94 2 0.13 0.15 209.67 233.51 257.45 281.51 305.69 329.97 354.37 3 0.16 0.18 164.53 183.15 201.83 220.58 239.40 258.29 277.25 4 0.19 0.21 135.39 150.66 165.97 181.33 196.74 212.19 227.69 5 0.22 0.24 115.02 127.96 140.93 153.94 166.98 180.06 193.17 6 0.25 0.27 99.97 111.20 122.46 133.74 145.05 156.38 167.73 7 0.28 0.30 88.41 98.33 108.27 118.22 128.20 138.20 148.22 8 0.31 0.33 79.24 88.12 97.02 105.94 114.86 123.81 132.77 9 0.34 0.36 71.80 79.84 87.89 95.96 104.04 112.13 120.24 10 0.37 0.39 65.63 72.98 80.34 87.70 95.08 102.47 109.87 11 0.40 0.42 60.44 67.20 73.97 80.75 87.54 94.34 101.14 12 0.43 0.45 56.01 62.28 68.55 74.82 81.11 87.40 93.70 13 0.46 0.48 52.19 58.02 63.86 69.71 75.56 81.42 87.28 14 0.49 0.51 48.85 54.31 59.77 65.24 70.72 76.20 81.69 15 0.52 0.54 45.92 51.05 56.18 61.32 66.46 71.61 76.76 16 0.55 0.57 43.32 48.15 52.99 57.84 62.69 67.54 72.40 17 0.58 0.60 40.99 45.57 50.15 54.73 59.32 63.91 68.51 18 0.61 0.63 38.91 43.25 47.59 51.94 56.29 60.65 65.01 19 0.64 0.66 37.02 41.15 45.29 49.42 53.56 57.71 61.85 20 0.67 0.69 35.31 39.25 43.19 47.14 51.09 55.04 58.99 21 0.70 0.72 33.75 37.52 41.28 45.05 48.83 52.60 56.38 22 0.73 0.75 32.32 35.93 39.54 43.15 46.76 50.37 53.99 23 0.76 0.78 31.01 34.47 37.93 41.39 44.86 48.33 51.79 24 0.79 0.81 29.80 33.13 36.45 39.78 43.11 46.44 49.77 25 0.82 0.84 28.69 31.88 35.08 38.28 41.49 44.69 47.90 26 0.85 0.87 27.65 30.73 33.81 36.90 39.98 43.07 46.16 27 0.88 0.90 26.68 29.66 32.63 35.61 38.59 41.57 44.55 28 0.91 0.93 25.78 28.66 31.53 34.41 37.28 40.16 43.04 29 0.94 0.96 24.94 27.72 30.50 33.28 36.07 38.85 41.64 30 0.97 0.99 24.15 26.84 29.54 32.23 34.92 37.62 40.32 31 1.00 1.02 23.41 26.02 28.63 31.24 33.85 36.47 39.08 32 1.03 1.05 22.72 25.25 27.78 30.31 32.85 35.38 37.92 33 1.06 1.08 22.06 24.52 26.98 29.44 31.90 34.36 36.82 34 1.09 1.11 21.44 23.83 26.22 28.61 31.00 33.39 35.79 35 1.12 1.14 20.86 23.18 25.50 27.83 30.16 32.48 34.81 36 1.15 1.17 20.30 22.56 24.83 27.09 29.35 31.62 33.88 37 1.18 1.20 19.78 21.98 24.18 26.39 28.59 30.80 33.01 38 1.21 1.23 19.28 21.43 23.57 25.72 27.87 30.02 32.17 39 1.24 1.26 18.80 20.90 22.99 25.09 27.19 29.28 31.38 40 1.27 1.29 18.35 20.40 22.44 24.49 26.53 28.58 30.63 41 1.30 1.32 17.92 19.92 21.91 23.91 25.91 27.91 29.91 42 1.33 1.35 17.51 19.46 21.41 23.36 25.32 27.27 29.22 43 1.36 1.38 17.12 19.03 20.93 22.84 24.75 26.66 28.57 44 1.39 1.41 16.74 18.61 20.47 22.34 24.21 26.07 27.94 45 1.42 1.44 16.39 18.21 20.03 21.86 23.69 25.51 27.34 46 1.45 1.47 16.04 17.83 19.61 21.40 23.19 24.98 26.77 47 1.48 1.50 15.71 17.46 19.21 20.96 22.71 24.46 26.21 48 1.51 1.53 15.40 17.11 18.82 20.54 22.25 23.97 25.69 49 1.54 1.56 15.09 16.77 18.45 20.13 21.81 23.50 25.18 50 1.57 1.59 14.80 16.45 18.09 19.74 21.39 23.04 24.69 51 1.60 1.62 14.52 16.13 17.75 19.37 20.98 22.60 24.22 ENGINEERING TABLE-1D (PPCR) Export Product: Cold Rolled Un-galvanised Colour Coated Non Alloy Steel Sheets/ Hoops Strips/ Wide Coils Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR) (kgs) a b Primer (litre) Back Coat (litre) Top Coat (litre) 1 0.10 0.12 37.150 44.779 79.607 65.06 906.739 2 0.13 0.15 27.164 32.743 58.209 47.57 931.806 3 0.16 0.18 21.410 25.806 45.878 37.49 946.253 4 0.19 0.21 17.667 21.295 37.858 30.94 955.649 5 0.22 0.24 15.038 18.126 32.224 26.34 962.248 6 0.25 0.27 13.090 15.778 28.051 22.92 967.138 7 0.28 0.30 11.589 13.969 24.834 20.30 970.907 8 0.31 0.33 10.397 12.532 22.279 18.21 973.900 9 0.34 0.36 9.427 11.363 20.201 16.51 976.334 10 0.37 0.39 8.623 10.393 18.477 15.10 978.353 11 0.40 0.42 7.945 9.576 17.025 13.91 980.055 12 0.43 0.45 7.366 8.878 15.784 12.90 981.509 13 0.46 0.48 6.865 8.275 14.712 12.02 982.765 14 0.49 0.51 6.429 7.749 13.776 11.26 983.861 15 0.52 0.54 6.044 7.285 12.952 10.58 984.827 16 0.55 0.57 5.703 6.874 12.221 9.99 985.683 17 0.58 0.60 5.398 6.507 11.568 9.45 986.448 18 0.61 0.63 5.125 6.177 10.982 8.97 987.135 19 0.64 0.66 4.877 5.879 10.452 8.54 987.756 20 0.67 0.69 4.653 5.608 9.970 8.15 988.319 21 0.70 0.72 4.448 5.362 9.532 7.79 988.834 22 0.73 0.75 4.261 5.135 9.130 7.46 989.304 23 0.76 0.78 4.088 4.928 8.760 7.16 989.737 24 0.79 0.81 3.929 4.736 8.420 6.88 990.136 25 0.82 0.84 3.782 4.559 8.105 6.62 990.505 26 0.85 0.87 3.646 4.394 7.812 6.38 990.848 27 0.88 0.90 3.519 4.241 7.540 6.16 991.166 28 0.91 0.93 3.400 4.099 7.287 5.96 991.464 29 0.94 0.96 3.290 3.965 7.049 5.76 991.741 30 0.97 0.99 3.186 3.840 6.827 5.58 992.002 31 1.00 1.02 3.089 3.723 6.619 5.41 992.246 32 1.03 1.05 2.997 3.613 6.422 5.25 992.476 33 1.06 1.08 2.911 3.508 6.237 5.10 992.693 34 1.09 1.11 2.829 3.410 6.063 4.95 992.897 35 1.12 1.14 2.752 3.317 5.898 4.82 993.091 36 1.15 1.17 2.679 3.229 5.741 4.69 993.274 37 1.18 1.20 2.610 3.146 5.593 4.57 993.448 38 1.21 1.23 2.544 3.067 5.452 4.46 993.613 39 1.24 1.26 2.482 2.992 5.318 4.35 993.770 40 1.27 1.29 2.422 2.920 5.191 4.24 993.919 41 1.30 1.32 2.366 2.851 5.069 4.14 994.061 42 1.33 1.35 2.312 2.786 4.953 4.05 994.197 43 1.36 1.38 2.260 2.724 4.843 3.96 994.327 44 1.39 1.41 2.210 2.664 4.737 3.87 994.451 45 1.42 1.44 2.163 2.607 4.635 3.79 994.570 46 1.45 1.47 2.118 2.553 4.538 3.71 994.683 47 1.48 1.50 2.074 2.500 4.445 3.63 994.793 48 1.51 1.53 2.033 2.450 4.356 3.56 994.897 49 1.54 1.56 1.993 2.402 4.270 3.49 994.998 50 1.57 1.59 1.954 2.355 4.187 3.42 995.095 51 1.60 1.62 1.917 2.311 4.108 3.36 995.188 ENGINEERING TABLE-1E (PPGL) Export Product: CR Zinc -Aluminium-Silicon Alloy Coated Colour Coated Non Alloy steel sheets/ strips/ wide coils (Plain / Corrugated) Sl.No. Export Product Thickness Range (In mm) Paints Guard Film (Kg) Content of Substrate (CR Zn-Al-Si Alloy Coated Steel) (kgs) a b Primer (litre) Back Coat (litre) Top Coat (litre) 1 0.10 0.12 47.101 56.774 100.931 82.49 881.756 2 0.13 0.15 32.128 38.725 68.845 56.26 919.346 3 0.16 0.18 24.378 29.384 52.238 42.69 938.801 4 0.19 0.21 19.640 23.674 42.086 34.40 950.695 5 0.22 0.24 16.444 19.821 35.238 28.80 958.718 6 0.25 0.27 14.143 17.048 30.307 24.77 964.495 7 0.28 0.3 12.407 14.955 26.586 21.73 968.854 8 0.31 0.33 11.050 13.320 23.679 19.35 972.259 9 0.34 0.36 9.961 12.007 21.345 17.44 974.994 10 0.37 0.39 9.067 10.929 19.430 15.88 977.237 11 0.40 0.42 8.321 10.030 17.830 14.57 979.111 12 0.43 0.45 7.688 9.267 16.474 13.46 980.700 13 0.46 0.48 7.144 8.612 15.309 12.51 982.065 14 0.49 0.51 6.673 8.043 14.299 11.69 983.249 15 0.52 0.54 6.259 7.545 13.413 10.96 984.286 16 0.55 0.57 5.894 7.105 12.631 10.32 985.203 17 0.58 0.6 5.569 6.713 11.935 9.75 986.018 18 0.61 0.63 5.279 6.363 11.311 9.24 986.749 19 0.64 0.66 5.017 6.047 10.750 8.79 987.406 20 0.67 0.69 4.779 5.761 10.241 8.37 988.002 21 0.70 0.72 4.564 5.501 9.779 7.99 988.544 22 0.73 0.75 4.366 5.263 9.356 7.65 989.039 23 0.76 0.78 4.186 5.045 8.969 7.33 989.493 24 0.79 0.81 4.019 4.844 8.612 7.04 989.911 25 0.82 0.84 3.865 4.659 8.283 6.77 990.296 26 0.85 0.87 3.723 4.487 7.978 6.52 990.654 27 0.88 0.9 3.591 4.328 7.694 6.29 990.986 28 0.91 0.93 3.467 4.180 7.430 6.07 991.295 29 0.94 0.96 3.352 4.041 7.184 5.87 991.584 30 0.97 0.99 3.245 3.911 6.953 5.68 991.854 31 1.00 1.02 3.144 3.789 6.737 5.51 992.108 32 1.03 1.05 3.049 3.675 6.534 5.34 992.346 33 1.06 1.08 2.960 3.568 6.342 5.18 992.570 34 1.09 1.11 2.876 3.466 6.162 5.04 992.781 35 1.12 1.14 2.796 3.370 5.991 4.90 992.981 36 1.15 1.17 2.721 3.279 5.830 4.76 993.170 37 1.18 1.2 2.649 3.193 5.677 4.64 993.349 38 1.21 1.23 2.582 3.112 5.532 4.52 993.519 39 1.24 1.26 2.517 3.034 5.394 4.41 993.680 40 1.27 1.29 2.456 2.961 5.263 4.30 993.834 41 1.30 1.32 2.398 2.890 5.138 4.20 993.980 42 1.33 1.35 2.342 2.823 5.019 4.10 994.120 43 1.36 1.38 2.289 2.759 4.906 4.01 994.253 44 1.39 1.41 2.239 2.698 4.797 3.92 994.380 45 1.42 1.44 2.190 2.640 4.693 3.84 994.502 46 1.45 1.47 2.144 2.584 4.593 3.75 994.619 47 1.48 1.5 2.099 2.530 4.498 3.68 994.730 48 1.51 1.53 2.056 2.479 4.407 3.60 994.838 49 1.54 1.56 2.015 2.429 4.319 3.53 994.941 50 1.57 1.59 1.976 2.382 4.234 3.46 995.040 51 1.60 1.62 1.938 2.336 4.153 3.39 995.135 ENGINEERING TABLE-1F (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils (Plain / Corrugated) Sl. No. Export Product Thickness Range (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 40-49 50-59 60-69 70-79 80-89 90-99 100-109 1 0.10 0.12 822.1 801.3 779.8 757.3 734.0 709.6 684.2 2 0.13 0.15 872.8 858.8 844.3 829.5 814.2 798.5 782.3 3 0.16 0.18 901.1 890.5 879.6 868.6 857.3 845.7 833.9 4 0.19 0.21 919.0 910.5 901.9 893.1 884.1 875.0 865.7 5 0.22 0.24 931.5 924.4 917.2 909.9 902.5 895.0 887.3 6 0.25 0.27 940.6 934.5 928.4 922.1 915.8 909.4 902.9 7 0.28 0.30 947.6 942.3 936.9 931.4 925.9 920.4 914.7 8 0.31 0.33 953.1 948.4 943.6 938.8 933.9 929.0 924.0 9 0.34 0.36 957.6 953.3 949.0 944.7 940.3 935.9 931.4 10 0.37 0.39 961.2 957.4 953.5 949.5 945.6 941.6 937.5 11 0.40 0.42 964.3 960.8 957.2 953.6 950.0 946.3 942.7 12 0.43 0.45 967.0 963.7 960.4 957.1 953.8 950.4 947.0 13 0.46 0.48 969.3 966.2 963.2 960.1 957.0 953.9 950.7 14 0.49 0.51 971.2 968.4 965.6 962.7 959.8 956.9 954.0 15 0.52 0.54 973.0 970.3 967.7 965.0 962.3 959.5 956.8 16 0.55 0.57 974.5 972.0 969.5 967.0 964.4 961.9 959.3 17 0.58 0.60 975.9 973.5 971.2 968.8 966.4 964.0 961.5 18 0.61 0.63 977.1 974.9 972.7 970.4 968.1 965.8 963.5 19 0.64 0.66 978.3 976.1 974.0 971.8 969.7 967.5 965.3 20 0.67 0.69 979.3 977.2 975.2 973.2 971.1 969.1 967.0 21 0.70 0.72 980.2 978.3 976.3 974.4 972.4 970.4 968.5 22 0.73 0.75 981.0 979.2 977.3 975.5 973.6 971.7 969.8 23 0.76 0.78 981.8 980.0 978.3 976.5 974.7 972.9 971.1 24 0.79 0.81 982.5 980.8 979.1 977.4 975.7 974.0 972.2 25 0.82 0.84 983.2 981.5 979.9 978.3 976.6 974.9 973.3 26 0.85 0.87 983.8 982.2 980.6 979.0 977.5 975.9 974.3 27 0.88 0.90 984.4 982.8 981.3 979.8 978.3 976.7 975.2 28 0.91 0.93 984.9 983.4 982.0 980.5 979.0 977.5 976.0 29 0.94 0.96 985.4 984.0 982.5 981.1 979.7 978.3 976.8 30 0.97 0.99 985.8 984.5 983.1 981.7 980.3 978.9 977.6 31 1.00 1.02 986.3 985.0 983.6 982.3 980.9 979.6 978.3 32 1.03 1.05 986.7 985.4 984.1 982.8 981.5 980.2 978.9 33 1.06 1.08 987.1 985.8 984.6 983.3 982.1 980.8 979.5 34 1.09 1.11 987.4 986.2 985.0 983.8 982.6 981.3 980.1 35 1.12 1.14 987.8 986.6 985.4 984.2 983.0 981.9 980.7 36 1.15 1.17 988.1 987.0 985.8 984.7 983.5 982.3 981.2 37 1.18 1.20 988.4 987.3 986.2 985.1 983.9 982.8 981.7 38 1.21 1.23 988.7 987.6 986.5 985.4 984.3 983.2 982.1 39 1.24 1.26 989.0 987.9 986.9 985.8 984.7 983.7 982.6 40 1.27 1.29 989.3 988.2 987.2 986.1 985.1 984.1 983.0 41 1.30 1.32 989.5 988.5 987.5 986.5 985.4 984.4 983.4 42 1.33 1.35 989.8 988.8 987.8 986.8 985.8 984.8 983.8 43 1.36 1.38 990.0 989.0 988.0 987.1 986.1 985.1 984.2 44 1.39 1.41 990.2 989.3 988.3 987.4 986.4 985.5 984.5 45 1.42 1.44 990.4 989.5 988.6 987.6 986.7 985.8 984.8 46 1.45 1.47 990.6 989.7 988.8 987.9 987.0 986.1 985.2 47 1.48 1.50 990.8 989.9 989.0 988.1 987.3 986.4 985.5 48 1.51 1.53 991.0 990.1 989.3 988.4 987.5 986.6 985.8 49 1.54 1.56 991.2 990.3 989.5 988.6 987.8 986.9 986.0 50 1.57 1.59 991.3 990.5 989.7 988.8 988.0 987.2 986.3 51 1.60 1.62 991.5 990.7 989.9 989.1 988.2 987.4 986.6 ENGINEERING TABLE-1F (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated) Sl. No . Export Product Thickness (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 110-119 120-129 130-139 140-149 150-159 160-169 170-179 1 0.10 0.12 657.7 629.9 600.9 570.5 538.7 505.3 470.1 2 0.13 0.15 765.6 748.4 730.7 712.4 693.5 674.0 653.9 3 0.16 0.18 821.8 809.5 796.8 783.8 770.6 757.0 743.0 4 0.19 0.21 856.3 846.7 836.8 826.8 816.6 806.2 795.7 5 0.22 0.24 879.6 871.7 863.7 855.6 847.3 838.9 830.4 6 0.25 0.27 896.4 889.7 883.0 876.1 869.2 862.2 855.0 7 0.28 0.30 909.1 903.3 897.5 891.6 885.6 879.5 873.4 8 0.31 0.33 919.0 913.9 908.8 903.6 898.3 893.0 887.7 9 0.34 0.36 926.9 922.4 917.8 913.2 908.5 903.8 899.0 10 0.37 0.39 933.5 929.4 925.2 921.1 916.8 912.6 908.3 11 0.40 0.42 938.9 935.2 931.4 927.6 923.8 919.9 916.0 12 0.43 0.45 943.6 940.1 936.7 933.2 929.7 926.1 922.5 13 0.46 0.48 947.6 944.4 941.2 937.9 934.7 931.4 928.1 14 0.49 0.51 951.0 948.1 945.1 942.1 939.1 936.0 933.0 15 0.52 0.54 954.0 951.3 948.5 945.7 942.9 940.0 937.2 16 0.55 0.57 956.7 954.1 951.5 948.9 946.2 943.6 940.9 17 0.58 0.60 959.1 956.7 954.2 951.7 949.2 946.7 944.2 18 0.61 0.63 961.2 958.9 956.6 954.2 951.9 949.5 947.2 19 0.64 0.66 963.2 961.0 958.8 956.5 954.3 952.1 949.8 20 0.67 0.69 964.9 962.8 960.7 958.6 956.5 954.4 952.2 21 0.70 0.72 966.5 964.5 962.5 960.5 958.5 956.4 954.4 22 0.73 0.75 967.9 966.0 964.1 962.2 960.3 958.3 956.4 23 0.76 0.78 969.3 967.4 965.6 963.8 961.9 960.1 958.2 24 0.79 0.81 970.5 968.7 967.0 965.2 963.5 961.7 959.9 25 0.82 0.84 971.6 969.9 968.2 966.6 964.9 963.2 961.4 26 0.85 0.87 972.7 971.0 969.4 967.8 966.2 964.5 962.9 27 0.88 0.90 973.6 972.1 970.5 968.9 967.4 965.8 964.2 28 0.91 0.93 974.5 973.0 971.5 970.0 968.5 967.0 965.5 29 0.94 0.96 975.4 973.9 972.5 971.0 969.5 968.1 966.6 30 0.97 0.99 976.2 974.8 973.4 971.9 970.5 969.1 967.7 31 1.00 1.02 976.9 975.5 974.2 972.8 971.5 970.1 968.7 32 1.03 1.05 977.6 976.3 975.0 973.6 972.3 971.0 969.7 33 1.06 1.08 978.3 977.0 975.7 974.4 973.1 971.8 970.5 34 1.09 1.11 978.9 977.6 976.4 975.1 973.9 972.6 971.4 35 1.12 1.14 979.5 978.3 977.0 975.8 974.6 973.4 972.2 36 1.15 1.17 980.0 978.8 977.7 976.5 975.3 974.1 972.9 37 1.18 1.20 980.5 979.4 978.3 977.1 976.0 974.8 973.7 38 1.21 1.23 981.0 979.9 978.8 977.7 976.6 975.5 974.3 39 1.24 1.26 981.5 980.4 979.3 978.3 977.2 976.1 975.0 40 1.27 1.29 982.0 980.9 979.8 978.8 977.7 976.7 975.6 41 1.30 1.32 982.4 981.4 980.3 979.3 978.3 977.2 976.2 42 1.33 1.35 982.8 981.8 980.8 979.8 978.8 977.7 976.7 43 1.36 1.38 983.2 982.2 981.2 980.2 979.2 978.3 977.3 44 1.39 1.41 983.5 982.6 981.6 980.7 979.7 978.7 977.8 45 1.42 1.44 983.9 983.0 982.0 981.1 980.1 979.2 978.3 46 1.45 1.47 984.2 983.3 982.4 981.5 980.6 979.6 978.7 47 1.48 1.50 984.6 983.7 982.8 981.9 981.0 980.1 979.2 48 1.51 1.53 984.9 984.0 983.1 982.2 981.4 980.5 979.6 49 1.54 1.56 985.2 984.3 983.5 982.6 981.7 980.9 980.0 50 1.57 1.59 985.5 984.6 983.8 982.9 982.1 981.2 980.4 51 1.60 1.62 985.8 984.9 984.1 983.3 982.4 981.6 980.8 ENGINEERING TABLE-1F (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated) Sl. No . Export Product Thickness (mm) CR Steel Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 180-189 190-199 200-209 210-219 220-229 230-239 1 0.10 0.12 433.2 394.2 353.1 309.7 263.8 215.1 2 0.13 0.15 633.1 611.5 589.3 566.2 542.3 517.4 3 0.16 0.18 728.8 714.1 699.1 683.7 667.9 651.6 4 0.19 0.21 784.8 773.8 762.6 751.1 739.4 727.4 5 0.22 0.24 821.7 812.9 803.9 794.8 785.6 776.1 6 0.25 0.27 847.8 840.5 833.0 825.5 817.8 810.1 7 0.28 0.30 867.2 861.0 854.6 848.2 841.7 835.1 8 0.31 0.33 882.3 876.8 871.2 865.6 860.0 854.3 9 0.34 0.36 894.2 889.4 884.5 879.5 874.5 869.5 10 0.37 0.39 904.0 899.6 895.2 890.8 886.3 881.8 11 0.40 0.42 912.1 908.1 904.1 900.1 896.1 892.0 12 0.43 0.45 918.9 915.3 911.7 908.0 904.3 900.6 13 0.46 0.48 924.8 921.5 918.1 914.7 911.3 907.9 14 0.49 0.51 929.9 926.8 923.7 920.5 917.4 914.2 15 0.52 0.54 934.3 931.4 928.5 925.6 922.6 919.7 16 0.55 0.57 938.2 935.5 932.8 930.0 927.3 924.5 17 0.58 0.60 941.7 939.1 936.6 934.0 931.4 928.8 18 0.61 0.63 944.8 942.4 940.0 937.5 935.1 932.6 19 0.64 0.66 947.6 945.3 943.0 940.7 938.4 936.1 20 0.67 0.69 950.1 947.9 945.7 943.6 941.4 939.2 21 0.70 0.72 952.4 950.3 948.2 946.2 944.1 942.0 22 0.73 0.75 954.4 952.5 950.5 948.5 946.6 944.6 23 0.76 0.78 956.4 954.5 952.6 950.7 948.8 946.9 24 0.79 0.81 958.1 956.3 954.5 952.7 950.9 949.1 25 0.82 0.84 959.7 958.0 956.3 954.5 952.8 951.1 26 0.85 0.87 961.2 959.6 957.9 956.3 954.6 952.9 27 0.88 0.90 962.6 961.0 959.4 957.8 956.2 954.6 28 0.91 0.93 963.9 962.4 960.8 959.3 957.8 956.2 29 0.94 0.96 965.1 963.6 962.2 960.7 959.2 957.7 30 0.97 0.99 966.3 964.8 963.4 962.0 960.5 959.1 31 1.00 1.02 967.3 965.9 964.5 963.2 961.8 960.4 32 1.03 1.05 968.3 967.0 965.6 964.3 962.9 961.6 33 1.06 1.08 969.3 968.0 966.6 965.3 964.0 962.7 34 1.09 1.11 970.1 968.9 967.6 966.3 965.1 963.8 35 1.12 1.14 971.0 969.7 968.5 967.3 966.0 964.8 36 1.15 1.17 971.8 970.6 969.4 968.2 967.0 965.8 37 1.18 1.20 972.5 971.3 970.2 969.0 967.9 966.7 38 1.21 1.23 973.2 972.1 971.0 969.8 968.7 967.5 39 1.24 1.26 973.9 972.8 971.7 970.6 969.5 968.4 40 1.27 1.29 974.5 973.5 972.4 971.3 970.2 969.1 41 1.30 1.32 975.1 974.1 973.0 972.0 970.9 969.9 42 1.33 1.35 975.7 974.7 973.7 972.6 971.6 970.6 43 1.36 1.38 976.3 975.3 974.3 973.3 972.3 971.3 44 1.39 1.41 976.8 975.8 974.8 973.9 972.9 971.9 45 1.42 1.44 977.3 976.4 975.4 974.4 973.5 972.5 46 1.45 1.47 977.8 976.9 975.9 975.0 974.1 973.1 47 1.48 1.50 978.3 977.3 976.4 975.5 974.6 973.7 48 1.51 1.53 978.7 977.8 976.9 976.0 975.1 974.2 49 1.54 1.56 979.1 978.3 977.4 976.5 975.6 974.7 50 1.57 1.59 979.5 978.7 977.8 977.0 976.1 975.2 51 1.60 1.62 979.9 979.1 978.3 977.4 976.6 975.7 ENGINEERING TABLE-1G (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated) Sl. No . Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 40-49 50-59 60-69 70-79 80-89 90-99 100-109 1 0.10 0.12 76.25 95.01 114.52 134.82 155.96 177.99 200.97 2 0.13 0.15 54.50 67.54 80.94 94.72 108.90 123.50 138.53 3 0.16 0.18 42.41 52.39 62.59 73.01 83.66 94.55 105.69 4 0.19 0.21 34.71 42.79 51.02 59.39 67.92 76.60 85.44 5 0.22 0.24 29.37 36.16 43.06 50.06 57.16 64.37 71.70 6 0.25 0.27 25.46 31.31 37.25 43.26 49.35 55.52 61.77 7 0.28 0.30 22.46 27.61 32.82 38.08 43.41 48.80 54.25 8 0.31 0.33 20.10 24.69 29.33 34.02 38.75 43.53 48.37 9 0.34 0.36 18.19 22.33 26.51 30.73 34.99 39.29 43.63 10 0.37 0.39 16.61 20.38 24.19 28.03 31.90 35.81 39.74 11 0.40 0.42 15.28 18.75 22.24 25.76 29.31 32.89 36.49 12 0.43 0.45 14.15 17.35 20.58 23.83 27.11 30.41 33.73 13 0.46 0.48 13.17 16.15 19.15 22.17 25.21 28.28 31.36 14 0.49 0.51 12.32 15.11 17.91 20.73 23.57 26.42 29.30 15 0.52 0.54 11.58 14.19 16.82 19.46 22.12 24.80 27.49 16 0.55 0.57 10.92 13.38 15.85 18.34 20.85 23.36 25.89 17 0.58 0.60 10.33 12.65 14.99 17.34 19.71 22.08 24.47 18 0.61 0.63 9.80 12.00 14.22 16.45 18.69 20.94 23.20 19 0.64 0.66 9.32 11.42 13.52 15.64 17.77 19.90 22.05 20 0.67 0.69 8.89 10.88 12.89 14.91 16.93 18.97 21.01 21 0.70 0.72 8.49 10.40 12.32 14.24 16.17 18.12 20.07 22 0.73 0.75 8.13 9.96 11.79 13.63 15.48 17.34 19.20 23 0.76 0.78 7.80 9.55 11.31 13.07 14.84 16.62 18.41 24 0.79 0.81 7.49 9.17 10.86 12.56 14.26 15.97 17.68 25 0.82 0.84 7.21 8.83 10.45 12.08 13.72 15.36 17.01 26 0.85 0.87 6.95 8.51 10.07 11.64 13.21 14.79 16.38 27 0.88 0.90 6.70 8.21 9.72 11.23 12.75 14.27 15.80 28 0.91 0.93 6.48 7.93 9.38 10.85 12.31 13.78 15.26 29 0.94 0.96 6.26 7.67 9.08 10.49 11.91 13.33 14.75 30 0.97 0.99 6.06 7.42 8.79 10.15 11.53 12.90 14.28 31 1.00 1.02 5.88 7.20 8.52 9.84 11.17 12.50 13.84 32 1.03 1.05 5.70 6.98 8.26 9.55 10.83 12.13 13.42 33 1.06 1.08 5.54 6.78 8.02 9.27 10.52 11.77 13.03 34 1.09 1.11 5.38 6.59 7.79 9.01 10.22 11.44 12.66 35 1.12 1.14 5.23 6.41 7.58 8.76 9.94 11.12 12.31 36 1.15 1.17 5.09 6.23 7.38 8.52 9.67 10.82 11.98 37 1.18 1.20 4.96 6.07 7.19 8.30 9.42 10.54 11.67 38 1.21 1.23 4.84 5.92 7.00 8.09 9.18 10.27 11.37 39 1.24 1.26 4.72 5.77 6.83 7.89 8.95 10.02 11.09 40 1.27 1.29 4.60 5.63 6.67 7.70 8.74 9.78 10.82 41 1.30 1.32 4.50 5.50 6.51 7.52 8.53 9.54 10.56 42 1.33 1.35 4.39 5.37 6.36 7.34 8.33 9.32 10.32 43 1.36 1.38 4.29 5.25 6.21 7.18 8.14 9.11 10.08 44 1.39 1.41 4.20 5.14 6.08 7.02 7.97 8.91 9.86 45 1.42 1.44 4.11 5.03 5.95 6.87 7.79 8.72 9.65 46 1.45 1.47 4.02 4.92 5.82 6.72 7.63 8.53 9.44 47 1.48 1.50 3.94 4.82 5.70 6.59 7.47 8.36 9.25 48 1.51 1.53 3.86 4.72 5.59 6.45 7.32 8.19 9.06 49 1.54 1.56 3.78 4.63 5.48 6.32 7.17 8.03 8.88 50 1.57 1.59 3.71 4.54 5.37 6.20 7.03 7.87 8.71 51 1.60 1.62 3.64 4.45 5.27 6.08 6.90 7.72 8.54 ENGINEERING TABLE-1G (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated) Sl. No . Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 110-119 120-129 130-139 140-149 150-159 160-169 170-179 1 0.10 0.12 224.97 250.05 276.28 303.76 332.57 362.81 394.58 2 0.13 0.15 154.01 169.97 186.43 203.41 220.93 239.03 257.73 3 0.16 0.18 117.09 128.75 140.68 152.90 165.41 178.23 191.36 4 0.19 0.21 94.44 103.61 112.96 122.48 132.19 142.08 152.17 5 0.22 0.24 79.14 86.69 94.36 102.16 110.08 118.13 126.31 6 0.25 0.27 68.10 74.52 81.03 87.62 94.31 101.09 107.96 7 0.28 0.30 59.77 65.35 70.99 76.71 82.49 88.34 94.26 8 0.31 0.33 53.25 58.18 63.17 68.21 73.30 78.45 83.65 9 0.34 0.36 48.01 52.43 56.90 61.41 65.96 70.55 75.19 10 0.37 0.39 43.71 47.72 51.76 55.84 59.95 64.10 68.28 11 0.40 0.42 40.12 43.78 47.47 51.19 54.94 58.72 62.53 12 0.43 0.45 37.08 40.45 43.84 47.26 50.71 54.18 57.68 13 0.46 0.48 34.46 37.58 40.73 43.89 47.08 50.29 53.52 14 0.49 0.51 32.19 35.10 38.03 40.97 43.94 46.92 49.93 15 0.52 0.54 30.20 32.92 35.66 38.42 41.19 43.98 46.79 16 0.55 0.57 28.44 31.00 33.57 36.16 38.76 41.38 44.01 17 0.58 0.60 26.87 29.29 31.72 34.16 36.61 39.07 41.55 18 0.61 0.63 25.47 27.76 30.05 32.36 34.68 37.01 39.35 19 0.64 0.66 24.21 26.38 28.56 30.74 32.94 35.15 37.37 20 0.67 0.69 23.07 25.13 27.20 29.28 31.37 33.47 35.58 21 0.70 0.72 22.03 23.99 25.97 27.95 29.95 31.95 33.96 22 0.73 0.75 21.08 22.96 24.84 26.74 28.64 30.55 32.47 23 0.76 0.78 20.20 22.00 23.81 25.63 27.45 29.28 31.11 24 0.79 0.81 19.40 21.13 22.86 24.60 26.35 28.10 29.86 25 0.82 0.84 18.66 20.32 21.98 23.66 25.33 27.02 28.71 26 0.85 0.87 17.97 19.57 21.17 22.78 24.40 26.02 27.64 27 0.88 0.90 17.33 18.87 20.42 21.97 23.52 25.08 26.65 28 0.91 0.93 16.74 18.23 19.72 21.21 22.71 24.22 25.73 29 0.94 0.96 16.19 17.62 19.06 20.51 21.95 23.41 24.87 30 0.97 0.99 15.67 17.05 18.45 19.84 21.25 22.65 24.06 31 1.00 1.02 15.18 16.52 17.87 19.22 20.58 21.94 23.31 32 1.03 1.05 14.72 16.02 17.33 18.64 19.96 21.28 22.60 33 1.06 1.08 14.29 15.56 16.82 18.09 19.37 20.65 21.93 34 1.09 1.11 13.88 15.11 16.34 17.58 18.82 20.06 21.30 35 1.12 1.14 13.50 14.69 15.89 17.09 18.29 19.50 20.71 36 1.15 1.17 13.14 14.30 15.46 16.63 17.80 18.97 20.15 37 1.18 1.20 12.79 13.92 15.06 16.19 17.33 18.47 19.62 38 1.21 1.23 12.47 13.57 14.67 15.78 16.89 18.00 19.11 39 1.24 1.26 12.16 13.23 14.30 15.38 16.46 17.55 18.63 40 1.27 1.29 11.86 12.91 13.96 15.01 16.06 17.12 18.18 41 1.30 1.32 11.58 12.60 13.62 14.65 15.68 16.71 17.74 42 1.33 1.35 11.31 12.31 13.31 14.31 15.31 16.32 17.33 43 1.36 1.38 11.06 12.03 13.01 13.98 14.97 15.95 16.93 44 1.39 1.41 10.81 11.76 12.72 13.67 14.63 15.59 16.56 45 1.42 1.44 10.58 11.51 12.44 13.38 14.31 15.25 16.20 46 1.45 1.47 10.35 11.26 12.18 13.09 14.01 14.93 15.85 47 1.48 1.50 10.14 11.03 11.92 12.82 13.72 14.62 15.52 48 1.51 1.53 9.93 10.81 11.68 12.56 13.44 14.32 15.20 49 1.54 1.56 9.73 10.59 11.45 12.31 13.17 14.03 14.90 50 1.57 1.59 9.54 10.38 11.22 12.07 12.91 13.76 14.60 51 1.60 1.62 9.36 10.18 11.01 11.83 12.66 13.49 14.32 ENGINEERING TABLE-1G (PPGL) Export Product: Cold Rolled Zinc-Aluminium-Silicon Alloy Coated Colour Coated Non Alloy Steel Sheets/Strips/Wide Coils(Plain / Corrugated) Sl. No . Export Product Thickness (mm) Zinc-Aluminium-Silicon Alloy Content (kgs) for different thickness of export product and different coating class in gms/m 2 a b 180-189 190-199 200-209 210-219 220-229 230-239 1 0.10 0.12 428.01 463.24 500.40 539.67 581.23 625.28 2 0.13 0.15 277.06 297.05 317.75 339.17 361.38 384.41 3 0.16 0.18 204.82 218.62 232.78 247.30 262.20 277.50 4 0.19 0.21 162.46 172.96 183.66 194.59 205.74 217.12 5 0.22 0.24 134.62 143.07 151.66 160.40 169.29 178.32 6 0.25 0.27 114.93 121.99 129.16 136.43 143.81 151.29 7 0.28 0.30 100.26 106.33 112.47 118.69 124.99 131.37 8 0.31 0.33 88.91 94.23 99.60 105.04 110.53 116.09 9 0.34 0.36 79.87 84.60 89.38 94.20 99.07 103.99 10 0.37 0.39 72.50 76.76 81.05 85.39 89.76 94.18 11 0.40 0.42 66.37 70.25 74.15 78.09 82.05 86.05 12 0.43 0.45 61.20 64.75 68.33 71.93 75.56 79.22 13 0.46 0.48 56.78 60.06 63.36 66.68 70.03 73.40 14 0.49 0.51 52.95 56.00 59.06 62.14 65.24 68.37 15 0.52 0.54 49.61 52.45 55.31 58.18 61.07 63.98 16 0.55 0.57 46.66 49.32 52.00 54.69 57.40 60.13 17 0.58 0.60 44.05 46.55 49.07 51.60 54.15 56.71 18 0.61 0.63 41.71 44.07 46.45 48.84 51.25 53.66 19 0.64 0.66 39.60 41.85 44.10 46.36 48.64 50.92 20 0.67 0.69 37.70 39.83 41.97 44.12 46.28 48.45 21 0.70 0.72 35.98 38.00 40.04 42.09 44.14 46.21 22 0.73 0.75 34.40 36.34 38.28 40.23 42.19 44.16 23 0.76 0.78 32.96 34.81 36.67 38.53 40.41 42.29 24 0.79 0.81 31.63 33.40 35.19 36.97 38.77 40.57 25 0.82 0.84 30.41 32.11 33.82 35.53 37.26 38.99 26 0.85 0.87 29.27 30.91 32.55 34.20 35.86 37.52 27 0.88 0.90 28.22 29.80 31.38 32.97 34.56 36.16 28 0.91 0.93 27.24 28.76 30.29 31.82 33.36 34.90 29 0.94 0.96 26.33 27.80 29.27 30.75 32.23 33.72 30 0.97 0.99 25.48 26.89 28.32 29.75 31.18 32.61 31 1.00 1.02 24.68 26.05 27.43 28.81 30.19 31.58 32 1.03 1.05 23.92 25.25 26.59 27.93 29.27 30.61 33 1.06 1.08 23.22 24.51 25.80 27.10 28.40 29.70 34 1.09 1.11 22.55 23.80 25.06 26.32 27.58 28.84 35 1.12 1.14 21.92 23.14 24.36 25.58 26.80 28.03 36 1.15 1.17 21.33 22.51 23.69 24.88 26.07 27.27 37 1.18 1.20 20.76 21.91 23.07 24.22 25.38 26.54 38 1.21 1.23 20.23 21.35 22.47 23.60 24.72 25.85 39 1.24 1.26 19.72 20.81 21.90 23.00 24.10 25.20 40 1.27 1.29 19.24 20.30 21.37 22.44 23.51 24.58 41 1.30 1.32 18.78 19.82 20.86 21.90 22.94 23.99 42 1.33 1.35 18.34 19.35 20.37 21.38 22.40 23.43 43 1.36 1.38 17.92 18.91 19.90 20.90 21.89 22.89 44 1.39 1.41 17.52 18.49 19.46 20.43 21.40 22.38 45 1.42 1.44 17.14 18.08 19.03 19.98 20.93 21.89 46 1.45 1.47 16.77 17.70 18.62 19.55 20.48 21.42 47 1.48 1.50 16.42 17.33 18.23 19.14 20.05 20.97 48 1.51 1.53 16.09 16.97 17.86 18.75 19.64 20.53 49 1.54 1.56 15.76 16.63 17.50 18.37 19.25 20.12 50 1.57 1.59 15.45 16.30 17.16 18.01 18.87 19.72 51 1.60 1.62 15.15 15.99 16.82 17.66 18.50 19.34 ************