New/Amended Standard Input Output Norms(SION) - DGFT - 30 (RE-2001)/1997-2002

New/Amended Standard Input Output Norms(SION) PUBLIC NOTICE NO. 30 (RE-2001)/1997-2002 Dated 01/08/2001 Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2719, the new entries at Sl.No.A-2720 to A-2739 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1678, the new entries at Sl.No.C-1679 to C-1685 shall be added as per Annexure "C" to this Public Notice. TEXTILE PRODUCTS After the existing entry at Sl.No.J-345 , the new entries at Sl.No. J-346 to J-347 shall be added as per Annexure "D" to this Public Notice. This issues in public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE (B. GANGAR) DY. DIRECTOR GENERAL OF FOREIGN TRADE FOR DIRECTOR GENERAL OF FOREIGN TRADE Annexure "A" to the Public Notice No. 30 Dated: 01/08/2001 AMENDMENTS/CORRECTIONS Sl. No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 3 Chemicals Allied Products Sl.No.A272 (Amended vide Public Notice No. 04 Dated: 31.03.2001) In the description of import item at Sl. No. 1 the words "OR Cyano Pyridine" shall be amended (without any change in quantity) to read as under:- "OR 4-Cyano Pyridine". 2. 151 Chemicals Allied Products Sl.No.A1111 The norm covered by this entry shall be deleted. 3. 165 Chemicals Allied Products Sl.No.A1299 The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "Isopropanol/Isopropyl Alcohol" 4. 167-168 Chemicals Allied Products Sl.No.A1333 The Note under this norm shall be deleted. 5. 173 Chemicals Allied Products Sl.No.A1404 The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "Isopropanol/Isopropyl Alcohol" 6. 176 Chemicals Allied Products Sl.No.A1435 1. The description of export item shall be amended to read as under:- "NONYL PHENOL (Specifications: Colour : 50 APHA Max. Phenol content : 0.05% Maximum Dinonyl content : 0.5% Maximum)" 2. The description of import item at Sl. No. 2 shall be amended (without any change in quantity) to read as under:- "Propylene Trimer/Nonene" 7. 191 Chemicals Allied Products Sl.No.A1566 The description of export item shall be amended to read as under:- "Kraft paper/Deluxe Kraft paper/Unbleached paper". 8. 241-242 Chemicals Allied Products Sl.No.A1802 After the import item at Sl. No. 12 the following import items (with quantity) shall be added:- "13. SKO - 0.60 KL 14. HSD/LDO - 0.60 KL". 9. 242-243 Chemicals Allied Products Sl.No.A1803 After the import item at Sl. No. 12 the following import items (with quantity) shall be added:- "13. SKO - 0.60 KL 14. HSD/LDO - 0.60 KL". 10. 297 Chemicals Allied Products Sl.No.A2217 Quantity of import item at Sl. No. 1 shall be amended (without any other change) to read as under:- "0.717 kg". 11. 299 Chemicals Allied Products Sl.No.A2237 The description of import item at Sl. No. 7 shall be amended (without any change in quantity) to read as under:- "Sulphamic Acid". 12. 303 Chemicals Allied Products Sl.No.2267 The following import item (with quantity) shall be added after the existing import items:- "3. Cyclohexanone - 0.787 kg". 13. 303 Chemicals Allied Products Sl.No.A2274 The description of import item at Sl. No. 2 (with quantity) shall be deleted. 14. 304 Chemicals Allied Products Sl.No.A2280 The norm covered by this entry shall be deleted. 15. 306 Chemicals Allied Products Sl.No.A2299 After the existing import items the following import items (with quantities) shall be added:- "12. Histadine Free Base Cell culture tested - 0.126 kgs 13. L-Alanine cell culture tested - 0.060 kgs 14. Tricine Cell culture tested - 0.180 kgs 15. TC Lactatalbumine Hydrolysate - 0.210 kgs 16. L. Arginine Monohydrochloride - 0.960 kgs 17. L. Glutamine - 0.067 kgs 18. Trypsin (From porcine pancreas gamma irradiated) - 0.012 kgs" 16. 22 Chemicals Allied Products Sl.No.A2535 (Amended vide Public Notice No. 53 Dated: 01/02/2001) The description of export item shall be corrected to read as under:- "Galaxy MW 253 Lauryl Alcohol 3 Mole Ethoxylate". 17. 22 Chemicals Allied Products Sl.No.A2536 (Amended vide Public Notice No. 53 Dated: 01/02/2001) The description of export item shall be corrected to read as under:- "Galaxy MW 257 Lauryl Alcohol 7 Mole Ethoxylate". 18. 46 Chemicals Allied Products Sl.No.A2640 (Amended vide Public Notice No. 04 Dated: 31/03/2001) 1. The description of export item shall be corrected to read as under:- "Coated Duplex Board Grey Back/Coated Board Grey Back containing 0.0135 SBR". 2. After the existing import items the following additional import item (with quantity) shall be added:- "9. Polymin SK - 0.0009 kg/kg". 19. 15 Chemicals Allied Products Sl.No.A2674 (Amended vide Public Notice No. 15 Dated: 01/06/2001) 1. The description of import item at Sl. No.1 (without any change in quantity) shall be corrected to read as under:- "Ethyl N-(4-Chloro 5- Cyclopentyloxy-2- Fluoro Phenyl) Carbamate (KPI)". 2. The quantity of import item at Sl. No. 4 shall be corrected to read as under:- "2.434 kgs ". 20. 16 Chemicals Allied Products Sl.No.A2678 (Amended vide Public Notice No. 15 Dated: 01/06/2001) 1. The description of export item shall be corrected to read as under:- "Aceto Acet Meta Xylidide". 2. The description of import item at Sl. No. 5 shall be corrected (without any change in quantity) to read as under:- "2,4 Xylidine". 21. 3 Chemicals Allied Products Sl.No.A2690 (Amended vide Public Notice No. 20 Dated: 11/06/2001) The description of export item shall be corrected to read as under:- "Heavy Ends (HE) viz. FO(2-3 grades), LSHS (2-3 grades), HPS, Pitch, Asphalt (3-4 grades) Petroleum Bitumen (3-4 grades) Raw Coke and Calcined Coke, Slack Wax (2-3 grades), Paraffin Wax, Microcrystalline Wax, CBFS, RPO, Sulphur". 22. 4 Chemicals Allied Products Sl.No.A2691 (Amended vide Public Notice No. 20 Dated: 11/06/2001) The description of import item at Sl. No. 2, shall be corrected (without any change in quantity) to read as under:- "2. Relevant catalysts and chemicals used in the manufacture of Paraxylene." 23. 4 Chemicals Allied Products Sl.No.A2692 (Amended vide Public Notice No. 20 Dated: 11/06/2001) The description of import item at Sl. No. 2, shall be corrected (without any change in quantity) to read as under:- "2. Relevant catalysts and Chemicals used in the manufacture of Orthoxylene." 24. 4 Chemicals Allied Products Sl.No.A2693 (Amended vide Public Notice No. 20 Dated: 11/06/2001) The description of import item at Sl. No. 2, (with value) shall be deleted. 25. 469 Engineering Products Sl. No. C- 274 1. The description of export item shall be substituted as under:- "Radiators for transformers (made out of CRCA non-alloy steel sheet) coated with Zinc rich epoxy primer and Polyurethane epoxy paint system". 26. 11 Engineering Products Sl. No. C- 274 (As amended vide Public Notice No. 42 Dated: 01/12/2000) The description and value of import item at Sl. No. 2 shall be amended to read as under:- "2. Zinc Rich Epoxy primer and Polyurethane epoxy paint system - Cif value restricted to 10% of the fob value". 27. 5-6 Engineering Product Sl.No.C508 (Amended vide Public Notice No. 36 Dated: 03/10/2000) The quantity of import item at Sl. No. 1(ii) shall be amended to read as under:- "260 kg" 28. 748 Engineering Product Sl.No.C1462 The description of export item shall be amended to read as under:- "Frame Field Assembly for 1.5 KW Automobile Starter Motor". 29. 751 Engineering Product Sl.No.C1481 The description of import item at Sl. No. 5 shall be amended (without any change in quantity) to read as under:- "5. Celgard (R) 3400 Flat sheet/Film". 30. 17-18 Engineering Product Sl.No.C1552 (Amended vide Public Notice No. 38 Dated: 01/11/2000) The description of import item at Sl. No. 5 shall be amended (without any change in quantity) to read as under:- "5. Grade-F 169-05 Paper Rolls/Filter reels". 31. 18 Engineering Product Sl.No.C1553 (Amended vide Public Notice No. 38 Dated: 01/11/2000) 1. The description of import item at Sl. No. 2 shall be amended (without any change in quantity) to read as under:- "2. Nylon Moulding Granules". 2. The description of import item at Sl. No. 5 shall be amended (without any change in quantity) to read as under:- "5. Celgard (R) 3400 Flat sheet/Film". 32. 28 Engineering Product Sl.No.C1588 (As amended vide Public Notice No. 53 Dated: 01/02/2001) 1. The description of export item shall be amended to read as under:- "Nickel Cadmium Pocket Plate Batteries in Polypropylene containers with spares and standard accessories". 2. The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "1. Nickel Hydroxide Power (45-65% Nickel+Cobalt)". 3. The description of import item at Sl. No. 2(b) shall be amended (without any change in quantity) to read as under:- "2(b). Graphite flakes (99.62% Carbon minimum)". 4. The description of import item at Sl. No. 6 shall be amended (without any change in quantity) to read as under:- "6. Polypropylene granules". 33. 805 Food Products Sl.No.E-51 The description of export item shall be amended to read as under:- "Walnut Kernels/ Bitter Apricot Kernels packed in relevant packing material". 34. 830-831 Leather Products Sl.No.G-18 1. The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "Relevant Synthetic Leather for Gloves". 2. The existing Note (No.1) under this norm shall be revised to read as under:- "Note: 1. In case of export product Synthetic Golf Gloves, same norms as above shall be applied. However, import item No.1 shall be allowed as 1(a) Relevant Synthetic Leather for Gloves both lakcut to the extent of 0.077 Sq.meter and 1(b) Relevant liner/lining material to the extent of 0.035 Sq.Meter". 35. 871 Plastic Products Sl.No.H-73 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed H-73 Epoxy Resin (Basic Liquid resin having epoxy value between 5.2 to 5.49) 1 kg 1. Epichlorohydrine 0.600 kg 2. Biphenol-A 0.676 kg 3. Caustic Soda Lye-(100%) 0.250 kg 36. 981-982 Textile Products Sl.No.J-92 1. After the import item at Sl. No. 4 the following additional import item (with quantity) shall be added:- "5. Fuel for power generation Naphtha - 5.50 kg OR Furnace oil - 4.10 litres". 2. The following notes shall be added below this norm:- "1. Naphtha and Furnace oil shall be allowed only under AU condition. 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil." 37. 982 Textile Products Sl.No.J-96 1. After the import item at Sl. No. 5 the following additional import item (with quantity) shall be added:- "6. Fuel for power generation Naphtha - 1.22 kg OR Furnace oil - 0.92 litres". 2. The following notes shall be added below this norm:- "1. Naphtha and Furnace oil shall be allowed only under AU condition. 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil." Annexure "B" to the Public Notice No. 30 Dated: 01/08/2001 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A2720 Octyl Phenol Ethoxylate (10 Moles) 1 kg 1. Octyl-Phenol 0.334 kg A2721 Gumboro 228 E (1.5 ML) 1.5 ML Vial 1. SPF-Chicken Eggs 0.38970 Nos. 2. Seed Virus 0.00016 Nos. 3. Tryptose 0.00159GMS 4. Gentamycin sulphate 0.00040GMS 5. Gumboro Stabilizer 0.0008 Litres 6. Glass Vials 1.08000 Nos. 7. Rubber Stoppers 1.08000 Nos. 8. Aluminium Caps 1.08000 Nos. A2722 Ortho Chloro Benzyl Chloride (2-Chloro Benzyl Chloride) 1 kg 1. Ortho Chloro Toluene 0.920 kg A2723 Di-n-Butyl Amine 1 kg 1. N-Butanol 1.208 kg A2724 1-Chloro Methyl Naphthalene 1 kg 1. Naphthalene 2.256 kg 2. Para Formaldehyde 1.692 kg 3. Per Chloro Ethylene 0.967 kg 4. Potassium Carbonate 0.670 kg A2725 3 Methyl Diphenyl Amine' 1 kg 1. Ortho Chloro Benzoic Acid 1.357 kg 2. Meta Toluidine 0.928 kg 3. Potassium Carbonate 1.54 kg 4. Dimethyl Formamide 2.00 kg A2726 Thiophene Ester 1 kg 1. Methacryclonitrile 0.81 kg/kg 2. Thioglycolic Acid Methyl Ester 1.29 kg/kg 3. N-Heptane 0.497 kg/kg A2727 IB Ma5 + ND Clone 30 (2 ML) 2 ML Vial 1. SPF-Chicken Egg 0.19840 Nos. 2. Seed Virus 0.00016 Nos. 3. Skimmed Milk Powder 0.14451GMS 4. Tryptose 0.00362 GMS 5. Gentamycin Sulphate 0.00036 GMS 6. Redox Stabilizer 0.00036 Litres 7. Glass Vials 1.0800 Nos. 8. Rubber Stoppers 1.0800 Nos. 9. Aluminium Caps 1.0800 Nos. A2728 Diethyl Dipropyl Malonate 1 kg 1. Diethyl Malonate 1.14 kg 2. N-Propyl Bromide 1.465 kg 3. Ethyl Alcohol Undenatured 0.113 kg 4. Sodium Hydroxide 0.490 kg 5. Benzene 2.25 kg 6. Acetic Acid 0.100 kg A2729 Antimony Triacetate (99.5% Purity) 1 kg 1. Antimony Trioxide 0.667 kg A2730 2-Amino 4, 2, 4 Trichloro Diphenyl Ether (TADE) (Purity 99.5%) 1 kg 1. 2, 4 Dichloro Phenol 0.862 kg 2. Potassium Hydroxide 0.367 kg A2731 Diethyl Hydroxylamine 85% 1 kg 1. Triethylamine 1.20 kg 2. Hydrogen peroxide (50%) 0.810 kg A2732 Tetanus Antitoxin BP 1500 IU/ML in Ampoules 1 Lac Ampoules 1. Tetanus Antitoxin BP 4000 IU/ML 47.625 Litres 2. Glass Ampoules 115,000 Nos. A2733 Amino Resin containing: 1) Dicyanodiamide formaldehyde resin: 24% Min. and 2) Calcium lingosulphonate: 39% Min. 1 kg 1. Dicyanodiamide (DCDA) 0.165 kg 2. Formaldehyde, 37% 0.216 kg 3. Calcium Lingnosulphonate 0.406 kg A2734 Thiopental Sodium Sterile BP' 1 kg 1. Methyl Sec Amyl Ethyl Cyano Acetate[Ethyl(1-Methyl) Butyl Ethyl Cyano Acetate 1.32 kg A2735 Nonyl Phenol Ethoxylate (6 Moles) 1 MT 1. Nonyl-Phenol 469 kgm A2736 Nonyl Phenol Ethoxylate (20 Moles) 1 MT 1. Nonyl Phenol 206.78 kgs A2737 Nonyl Phenol Ethoxylate (30 Moles) 1 MT 1. Nonyl Phenol 148.78 kgs A2738 Pigment Yellow 13 (Non rosinated) 1 kg 1. Ortho Nitro Chloro Benzene 0.543 kg 2. Methanol 0.322 kg 3. Sodium Nitrite 0.230 kg 4. Aceto Acet Meta Xylidide 0.635 kg 5. Dichlone 0.015 kg A2739 Base Paper in Roll Form (width 10 CM to 40 CM) 1 kg 1. Base Paper in Jumbo Roll of relevant GSM and Grade 1.02 kg/kg Annexure "C" to the Public Notice No. 30 Dated: 01/08/2001 ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed C1679 Ferro Aluminium Containing 35-40% Aluminium 1 kg 1. Aluminium Scrap (Taint Tabor) 0.440 kg 2. Mild Steel Scrap 0.635 kg C1680 Power driven centrifugal Pump with motor of frame Size 1071 (0.5 HP) 1 No. 1. Cold rolled Non-oriented (CRNO) electrical Steel Sheets OR Sheets in coil form 8 kgs 2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips 0.975 kgs 3. (a) Electrolytic Grade Aluminium ingot for rotor. 0.705 kgs (b) Commercial grade Aluminium ingot for housing 0.705 kgs 4. Stainless Steel rod for Shaft 0.686 kgs 5. Relevant Ball/Sleeve/ Roller bearings 2 Nos. 6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape. upto 1.5% of FOB value 7. Packing material - Craft paper Lable, Name Plate, Ribbon As per packing Policy 8. Motor Protectors/ Thermal Protectors. 1 No. 9. Power Capacitors 1 No. 10. Plastic Insulated wire/ cable 6 mtr. 11. Terminals, Connectors 8 Nos. 12. Non ferrous impeller-Copper 0.567 kgs 12. Non ferrous impeller-Tin 0.068 kgs 13. Mechanical Seal 1 No. C1681 Power driven centrifugal Pump with motor of frame Size 1063 (0.5 HP) 1 No. 1. Cold rolled Non-oriented (CRNO) electrical Steel Sheets OR Sheets in coil form 4.5 kgs 2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips 0.822 kgs 3. (a) Electrolytic Grade Aluminium ingot for rotor. 0.493 kgs (b) Commercial grade Aluminium ingot for housing 0.492 kgs 4. Stainless Steel rod for Shaft 0.320 kgs 5. Relevant Ball/Sleeve/ Roller bearings 2 Nos. 6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape. upto 1.5% of FOB 7. Packing material - Craft paper Lable, Name Plate, Ribbon As per packing Policy 8. Motor Protectors/ Thermal Protectors. 1 No. 9. Power Capacitors 1 No. 10. Non ferrous impeller-Copper 0.190 kgs 10. Non ferrous impeller-Tin 0.042 kgs 11. Mechanical Seal 1 No. C1682 Power driven centrifugal Pump with 0.75 HP motor 1 No. 1. Cold rolled Non-oriented (CRNO) Electrical Steel Sheets OR Sheets in coil form 10.01 kgs 2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips 1.36 kgs 3. (a) Electrolytic Grade Aluminium ingot for rotor. 0.74 kgs (b) Commercial grade Aluminium ingot for housing 0.74 kgs 4. Stainless Steel rod for Shaft 0.796 kgs 5. Relevant Ball/Sleeve/ Roller bearings 2 Nos. 6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape. upto 1.5% of FOB value 7. Packing material - Craft paper Lable, Name Plate, Ribbon As per packing Policy 8. Motor Protectors/ Thermal Protectors. 1 No. 9. Power Capacitors 1 No. 10. Plastic Insulated wire/ cable 6 mtr. 11. Terminals, Connectors 8 Nos. 12. Non ferrous impeller-Copper 0.595 kgs 12. Non ferrous impeller-Tin 0.087 kgs 13. Mechanical Seal 1 No. C1683 Power driven centrifugal Pump with 1 HP motor 1 No. 1. Cold rolled Non-oriented (CRNO) Electrical Steel Sheets OR Sheets in coil form 12 kgs 2. Copper wire bars/ Cathodes/ Rods/ winding / winding wires/ strips 1.975 kgs 3. (a) Electrolytic Grade Aluminium ingot for rotor. 1.127 kgs (b) Commercial grade Aluminium ingot for housing 1.126 kgs 4. Stainless Steel rod for Shaft 1.40 kgs 5. Relevant Ball/Sleeve/ Roller bearings 2 Nos. 6. Insulation material consisting of paper, Nylon, Polyester, Amide, Nomex Film, Varnish, Polyester Cord, tape. upto 1.5% of FOB value 7. Packing material - Craft paper Lable, Name Plate, Ribbon As per packing Policy 8. Motor Protectors/ Thermal Protectors. 1 No. 9. Power Capacitors 1 No. 10. Plastic Insulated wire/ cable 6 mtr. 11. Terminals, Connectors 8 Nos. 12. Non ferrous impeller-Copper 0.931 kgs 12. Non ferrous impeller-Tin 0.136 kgs 13. Mechanical Seal 1 No. C1684 Microwave Ferrite -Garnet 100 kg 1. Yttrium Oxide 88.5 kg 2. Iron Oxide 95 kg 3. Aluminium Oxide 7.5 kg 4. Tin Oxide 4.5 kg 5. Indium Oxide 4.5 kg 6. Poly Vinyl Alcohol cif value restricted to 10% of the fob value 7. Alumina Substrate cif value restricted to 10% of the fob value 8. Diamond Pellet Grinding Wheel cif value restricted to 10% of the fob value C1685 Ultra Press 1 No. 1. Eddy Current Meter 1 No. 2. Clutch Break 1 No. 3. Overload Protector 1 No. 4. Fly wheel for 100T Press 1 No. 5. Carbon Steel SAE 1050 1.05 /kg content in the export product 6. AG Break Motor HAG 1 No. 7. Rotary Cam Switch 1 No. 8. Slide Counter 1 No. 9. Motor Lubrication unit 1 No. 10. Bearing case for 100T press 1 No. 11. Spherical Roll Bearing 1 No. 12. Ball Bearing 2 No. 13. C Roller Bearing 1 No. 14. Surge Tank for 100 T press 1 No. 15. Alloy Steel of relevant grade 1.05 /kg content in the export product 16. Front GIB Plate for 100T press right hand 1 No. 17. Front GIB Plate for 100T press left hand 1 No. 18. GIB Plate Rod for 100T Press 2 No. 19. MS Plates 1.05 /kg content in the export product 20. Gear End Plate for 100T Press 1 No. 21. Cylinder for 100T Press 1 No. 22. Worm wheel 20Z4M 150D RH 1 No. 23. Dual Solenoid valve ¾" BSP - 3 way 1 No. Annexure "D" to the Public Notice No. 30 Dated: 01/08/2001 TEXTILE PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed J346 i) Dyed Pile Fabric 1 Sq. Metre 1. Relevant Pile Grey Fabric 1.01 Sq. Metre/per Sq. Metre content in the export product. ii) Dyed and Printed Pile Fabric/ Printed Pile fabric 1 Sq. Metre 1. Relevant Pile Dyed Fabric 1.01 Sq. Metre/per Sq. Metre content in the export product OR 1. Relevant Pile Grey Fabric 1.02 Sq. Metre/ Sq. Metre content in the export product J347 Made-ups made from Pile fabrics 1 Sq. Metre 1. Relevant Processed Pile Fabrics 1.01 Sq. Metre/ Sq. Metre content in the export product