Fixation and modification of input output norms - DGFT - 45 (RE-2001)/1997-2002

Fixation and modification of input output norms PUBLIC NOTICE NO. 45(RE-2001)/1997-2002 Dated 01/11/2001 1. Attention is invited to Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended and Paragraphs 7.8 and 7.10 of the Handbook of Procedures, Vol.1, 1997-2002, as amended and also to the Handbook of Procedures, Vol.2, 1997-2002, as amended from time to time. 2. In exercise of the powers conferred under Paragraph 4.11 of the Export and Import Policy 1997-2002, as amended, the Director General of Foreign Trade hereby makes the following amendments/modifications and additions in the Handbook of Procedures, Vol.2, 1997-2002, as amended. 3. In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, Vol.2, 1997-2002, as amended, amendments/ corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 4. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at Sl.No.A-2779, the new entries at Sl.No.A-2780 to A-2789 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After the existing entry at Sl.No.C-1699, the new entries at Sl.No.C-1700 to C-1710 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After the existing entry at Sl.No. E-104, the new entry at Sl.No.E-105 shall be added as per Annexure "D" to this Public Notice. 5. This issues in public interest. (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE (B. GANGAR) DY.DIRECTOR GENERAL OF FOREIGN TRADE Annexure "A" to the Public Notice No. 45 Dated: 01/11/2001 AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 84 Chemicals Allied Products Sl.No.A591 The description of import item at Sl. No. 1, shall be corrected (without any change in quantity) to read as under:- "Picramic Acid/ Sodium Picramate". 2. 162 Chemicals Allied Products Sl.No.A1260 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A1260 Beta Phenyl Ethyl Amine 1 kg 1. Benzyl Cyanide 1.200 kg OR 1. i) Benzyl Chloride 1.504 kg 1. ii) Sodium Cyanide 0.582 kg 2. Isopropyl Alcohol 0.400 kg 3. Methanol 0.033 kg 4. Neckel Catalyst 0.012 kg 3. 169 Chemicals Allied Products Sl.No.A1360 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A1360 Hexamethyl Disilazane 1 kg 1. a) Hexa Methyl Disiloxane 1.49 kg 1. b) Residual Polymer Mixture/Volatile Cyclic Mixture containing approx. 95% Silicone content 0.878 kg OR 1. b) Dimethyl Dichloro Silane 1.309 kg OR 1.a)Trimethyl Chloro-silane (TMCS) 1.50 kg 1. b)Toluene 0.10 kg 1. c) Ammonia Gas 0.35 kg 4. 186 Chemicals Allied Products Sl.No.A1539 The description of import item at Sl. No.3 shall be amended (without any change in quantity) to read as under:- "3. Meta Cresol/Meta Para Cresol" 5. 187 Chemicals Allied Products Sl.No.A1544 1. The description of export item shall be amended to read as under:- "Soya Long Oil Alkyd of 62% Oil length with Solid content 70 + 2% and MTO 30 + 2%" 2. After the import item at Sl. No. 4, the following additional import item (with quantity) shall be added:- "5. Mineral Turpentine - 31.5 kgs" Oil (MTO) 6. 198 Chemicals Allied Products Sl.No.A1614 After the import item at Sl. No. 1 against this entry, the following alternative item (with quantity) shall be added:- "OR Liquid Bromine - 1.548 kg " 7. 240 Chemicals Allied Products Sl.No.A1790 After the description of import item at Sl. No.8, the following item (with quantity) shall be added:- "9. Furnace Oil - 0.8127 Litre" 8. 248 Chemicals Allied Products Sl.No.A1843 1. After the import item at Sl. No. 5 the following additional import item (with quantity) shall be added:- "6. Furnace Oil As per Note 2 below" 2. The existing Note below this norm shall be read as Note 1 and after that the following Note shall be added:- "Note: 2.The item No. 6 may be allowed @ 0.546 Ltr./kg of Polyester Texturised Yarn and @ 0.182 Ltr./kg of POY" 9. 6 Chemicals Allied Products Sl.No.A2090 (as amended vide Public Notice No. 38 Dated: 01/11/2000) The quantity of import item at Sl. No. 4 ( i.e. Triethyl Amine) shall be amended to read as under:- "0.012 kg" 10. 285 Chemicals Allied Products Sl.No.A2124 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2124 Zeolite (Sodium Alumina Silicate) 1 kg 1. Sodium Silicate 0.481 kg OR 1. i) Silica Sand 0.340 kg 1. ii) Soda Ash 0.220 kg 2. Aluminium Hydroxide 0.480 kg 3. Caustic Soda Flakes 0.090 kg 11. 293 Chemicals Allied Products Sl.No.A2197 After the description of import item at Sl. No.3, the following item (with quantity) shall be added:- "4. Furnace Oil 0.682 kg" 12. 17 Chemicals Allied Products Sl.No.A2469 (as amended vide Public Notice No. 32 Dated: 01/09/2000) The description of export item shall be corrected to read as under:- "N-Ethyl 3-Carbomyl 4-Methyl - 6 Hydroxy - 2 Pyridone" 13. 20 Chemicals Allied Products Sl.No.A2501 (as amended vide Public Notice No.42 Dated: 01/12/2000) The existing Note at the end of this entry shall be substituted by the following:- "Note: In case of different percentage of solution, the quantity of all the inputs may be allowed on pro-rata basis based on the percentage of import content in the export product" 14. 20 Chemicals Allied Products Sl.No.A2534 (as amended vide Public Notice No.53 Dated: 01/02/2001) The description of import items at Sl. Nos. 3, 4, 6 shall be corrected (without any change in quantities) to read as under:- "3. Epoxydised Soyabean Oil 4. PVC Stabilizer 6. Calcium Carbonate" 15. 15 Chemicals Allied Products Sl.No.A2674 (as amended vide Public Notice No. 15 Dated: 01/06/2001) The quantity of import item at Sl. No. 4 shall be corrected to read as under:- "2.434 kgs." 16. 18 Chemicals Allied Products Sl.No.A2713 (As amended vide Public Notice No. 24 Dated: 02/07/2001 1. The quantity of import item at Sl. No. 10 (i.e. Nylon Fabric for Tyres of relevant GSM) shall be amended to read as under:- "11 kgs" 2. At the end of this norm the following Note shall be added:- "Note: The weight of each Tyre shall not be more than 580 gms + 2%" 17. 12 Chemicals Allied Products Sl.No.A2742 (As amended vide Public Notice No. 35 Dated: 03/09/2001 The description of export item shall be corrected to read as under:- "Sodium 2 Ethyl Hexyl Sulfate (Active Matter 40 + 2%)" 18. 393 Electronics Products Sl.No.B-134 The description of export item shall be amended to read as under:- "Quartz Analogue Wrist Watch Movement (including CKD/SKD thereof)" 19. 463-464 Engineering Products Sl.No.C253 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed C253 Plated Wires (Single/Stranded) a) of Copper or b) of Copper Clad/Coated Steel or c) of Copper Alloy 1 kg 1. Base Metal 1. a) Copper Cathode/ Wire Bar/ C C Rod/Wire 1.0 kg OR 1. b) Copper Clad/ Coated Steel Wire 1.0 kg OR 1. c) Copper Alloy Wire/ Cathode/ Wire Bar/C C road/Wire 1.0 kg 2. Silver 99.9% purity (Ingot, Granuels, Plates or Powder) 0.025 kg 3. Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives 2% of the FOB value of export 4. Plastic Bobbins, Plastic Spools, Protective paper / film As per Packing Policy Note: 1. Export product may have Silver, Nickel or Tin Plating on it, but Silver will be allowed only if the export product has Silver plating on it. Note: 2. Import of base Metal in 1 a), b) or c) will be allowed depending on the base metal used in export product a) or b) or c). 20. 479 Engineering Product Sl.No.C297 The description of export item shall be amended to read as under:- "Stamping (Stator Rotor sets) for electric Motors" 21. 606 Engineering Product Sl.No.C826 The description of export item shall be amended to read as under:- "Stainless Steel Kitchen Sinks" 22. 609 Engineering Products Sl.No.C844 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed C844 Steel Cops/ Pirn/Bobbin 1 kg 1. Hot finished Carbone Steel Seamless Tubes/ Pipes 1.33 kg/kg content in export 2. ABS Granuals / resin 1.05 kg/kg content in export 3. CRCA Steel Sheet/ Strips 1.15 kg/kg content in export 23. 621-622 Engineering Products Sl.No.C923 to C926 At the end of each of these norms the following Note shall be added:- "Note: This norm shall also be applicable to exports made in "Cloth Roll" form." 24. 642 Engineering Products Sl.No.C-980 After the description of import item at Sl. No. 4 the following additional import item (with quantity) shall be added:- "5. Atomised Iron Powder 0.135 kg." 25. 10 Engineering Products Sl.No.C-1343 (as amended vide Public Notice No. 9 Dated: 01/05/2000) The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "1. Cold Rolled Mild Steel Strips/ Coils/Sheets" 26. 734 Engineering Products Sl.No.C-1392 1. The description of import item at Sl. No. 1 3 shall respectively be amended (without any change in quantity) to read as under:- "1.Continuous cast copper Rod/cathodes/wire bars (EC Grade) 3. XLPE compound/Cross Linkable LDPE Compound" 2. After the import item at Sl. No. 4(c) the following additional import item at Sl. No. (d) (with quantity) shall be added:- "d). Filler material (Calcium 0.31 kg Carbonate / Alumina / Kolin)" 27. 58 Engineering Products Sl.No.C-1614 (as amended vide Public Notice No. 04 Dated: 31/03/2001) The description of import item at Sl. No. 1 shall be amended (without any change in quantity) to read as under:- "1. Cold Rolled Mild Steel Strips/ Coils/Sheets" 28. 23 Engineering Products Sl.No.C1669 (as amended vide Public Notice No. 24 Dated: 02/07/2001) The description of import item at Sl. No. 3 shall be corrected (without any change in quantity) to read as under:- "3. Polypropylene Granules" 29. 24 Engineering Products Sl.No.C1671 (as amended vide Public Notice No. 24 Dated: 02/07/2001) The description of export item shall be corrected to read as under:- "Heat recovery Wheel (1 No. : Heat recovery Wheel incorporating Rotor of 1 Cubic Metre Volume having 1.9 mm flute height)" 30. 21-22 Engineering Products Sl.No.C1685 (as amended vide Public Notice No. 30 Dated: 01/08/2001) 1. The description of import items at Sl. Nos.4,5,6,10,11,14,16,18,20,21,22, 23 shall respectively be corrected (without any change in quantity) to read as under:- "4. Fly Wheel 5. Carbon Steel of relevant grade 6. AG Break Motor 10. Bearing Case 11. Spherical Roller Bearing 14. Surge Tank 16. Front GIB Plate Right Hand 18. GIB Plate Rod 20. Gear End Plate 21. Cylinder 22. Worm Wheel 23. Dual Solenoid Valve" 31. 9-10 Plastic Products Sl.No.H-129 (As amended vide Public Notice No. 32 Dated: 01/09/2000) The description of import items at Sl. No. 7, 8 9 shall respectively be amended (without any change in quantity) to read as under:- "7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion) 7. ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion) 8. i) Poligen WE 1 (Polyethylene based Wax Emulsion) 9. i) Surfinol 104H (Surfactant) (2,4,7,9 Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol) 9. ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate) 9. iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)" 32. 10-11 Plastic Products Sl.No.H-130 (As amended vide Public Notice No. 32 Dated: 01/09/2000) The description of import items at Sl. No. 7, 8 9 shall respectively be amended (without any change in quantity) to read as under:- "7. i)Neocryl XK 70 (Modified Acrylic/ Styrene Co-polymer Emulsion) 7. ii)Poligen MV 250/ Syntran MV 250 (Aqueous, Metal-cross- linked Styrene- acrylate Copolymer Dispersion) 8. i) Poligen WE 1 (Polyethylene based Wax Emulsion) 9. i) Surfinol 104H (Surfactant) (2,4,7,9 Tetramethyl 5 Decyn-4, 7-Diol) (Tetramethyl Decyndiol) 9. ii) Fluorade FC-129 (Surfactant) (Potassium Fluoroalkyl Carboxylate) 9. iii) Rewopol SBDO 75 (Sodium Di-isooctyl Sulfosuccinate)" 33. 934-35 Plastic Products Sl.No.H-367 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed H-367 Nylon-6/ Nylon-66 Monofilament Yarn wound on Disposable Bobbins 1 kg 1. Relevant Nylon-6/ Nylon-66 Chips 1.05 kg/kg content in the export product 2. Antioxidant 0.002 kg 3. Finish Oil 0.001 kg 4. Surface Active Agent 0.001 kg 5. Polypropylene Granules for Bobbins 1.05 kg/kg content in the export product Note: 1. Only the relevant grade of Nylon Chips as contained in the export product shall be allowed. Note: 2. When export is not on Bobbins, Polypropylene Granules shall not be allowed for import. 34. 24 Plastic Products Sl.No.H-440 (incorporated vide Public Notice No. 15 Dated: 01/06/2001) (Col. No. 3 of S.No.34 has been amended vide PN.No. 58(RE-01), dt. 1/1/2002. ) The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed H440 Aluminum Metalised BOPP Film 1 kg 1. BOPP Film 1.10 kg OR 1. Polypropylene Resin/Granules 1.32 kg 2. Aluminium Wire 0.0246 kg 3. Induction/ Evaporation Boats 0.007 kg 35. 956 Textile Products Sl.No.J-4 After the description of import item at Sl. No. 2 the following additional import items (with quantities) shall be added:- "3. Lubricating agent 0.05 kg/kg (50% Concentration) 4. Cone centres net to net basis 36. 11 Textile Products Sl.No.J-92 (as amended vide Public Notice No. 30 Dated: 01/08/2001) The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed J-92 Cotton fabric - dyed with/without elaston/lycra/ spandex yarn 1 kg 1. Cotton Yarn 1.10 kg OR 1. Raw cotton for carded counts of yarn of 40s below 1.225 kg/kg content in the export product OR 1. Raw cotton for combed counts of yarn of 40s and below 1.289 kg/kg content in the export product OR 1. Raw cotton for combed counts of yarn of above 40s 1.325 kg /kg content in the export product 2. Polyvinyl Alcohol (PVA) Sizing Material 0.01 kg 3. Sodium Hydrosulphite 0.02 kg 4. Vat/reactive sulphur/ pigment dyes (100% strength) 0.015 kg 5. Elaston/ lycra/ spandex yarn 1.05 kg/kg of materials content in the export product OR 5. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 1.05 kg/kg of materials content in the export product 6. Fuel for power generation Naphtha 5.50 kg OR 6. Furnace Oil 4.10 ltrs Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition. Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. 37. 12 Textile Products Sl.No.J-96 (as amended vide Public Notice No. 40 Dated: 01/10/2001) The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed J96 Cotton indigo blue dyed denim cloth with/ without elaston /lycra/ spandex yarn kg 1. Raw Cotton 1.24 kg/kg content in export OR 1. Cotton Yarn 1.04 kg/kg content in export 2. Vat Indigo Blue Dye 0.05 kg 3. Polyvinyl Alcohol 0.03 kg 4. Sodium Hydrosulphite 0.02 kg 5. Caustic Soda Flakes 0.02 kg 6. Elaston/ lycra/ spandex yarn 1.05 kg/kg of materials content in the export product OR 6. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 1.05 kg/kg of materials content in the export product 7. Polyacrylic Synthetic sizing agent 0.016 kg 8. Sulfoesterifiedamide starch/ modified starch 0.044 kg 9. Fuel for power generation - Naphtha 1.22 kg OR 9. Furnace Oil 0.92 litres Note: 1. Naphtha and Furnace oil shall be allowed only under AU condition. Note:2. The above norm for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have facilities for captive power generation using naphtha/furnace oil. 38. 1014 Textile Products Sl.No.J-308 The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed J-308 Cotton yarn dyed fabrics/made-ups with/without elaston/ lycra/ spandex yarn 1 kg 1. Cotton Yarn 1.10 kg 2. Polyvinyl Alcohol (PVA) Sizing Materials 0.01 kg 3. Sodium Hydro Sulphite 0.02 kg 4. Vat/reactive/ sulphur/ pigment dyes (100% strength) 0.015 kg 5. Elaston/ lycra/ spandex yarn 1.05 kg/kg of materials content in the export product OR 5. Stretch yarn (mixed yarn containing 95% cotton and 5% of elaston/ lycra/ spandex yarn) 1.05 kg/kg of materials content in the export product 6. Fuel for power generation - Naphtha 5.50 kg OR 6. Furnace Oil 4.10 litres Note: 1. Naphtha and Furnace Oil shall be allowed only under AU condition. Note: 2. The above norms for fuel are applicable only to composite units having spinning, weaving and processing activities. Also the said units should have a captive power plant using "Naphtha/Furnace Oil" as fuel. Annexure "B" to the Public Notice No. 45 Dated: 01/11/2001 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A2780 Ametryn Technical 98% Minimum 1 kg 1. Cyanuric Chloride 0.900 kg 2. Isopropyl Amine (70%) 0.412 kg 3. Mono Ethyl Amine (70%) 0.314 kg 4. Toluene 0.245 kg 5. Thiourea 0.630 kg 6. Dimethyl Sulphate 0.548 kg 7. Sodium Hydroxide 1.174 kg A2781 Cetyl/ Hexadecyl Trimethyl Ammonium Chloride (25% by weight) 1 kg 1. Dimethyl Palmityl Amine 0.222 kg A2782 Polyethylene Glycol 300 1 kg 1. Diethylene Glycol 0.346 kg 2. Potassium Hydroxide 0.001 kg 3. Acetic Acid 0.001 kg A2783 Anisyl Acetone 1 kg 1. Phenol 1.80 kg A2784 Sodium Phenoxy Acetate 1 kg 1. Phenol 0.749 kg 2. Sodium Bicarbonate 0.508 kg 3. Caustic Soda 0.350 kg 4. Mono Chloro Acetic Acid 0.818 kg 5. Soda Ash 0.519 kg A2785 Sultamicillin Tosylate 1 kg 1. 6-APA 2.35 kg 2. Ampicillin Trihydrate BP93 0.96 kg 3. Potassium Permanganate 4.70 kg 4. 2-Ethyl Hexanoic Acid 1.02 kg 5. Methyl Aceto Acetate 0.70 kg 6. Isopropyl Alcohol 3.94 kg 7. Methylene Chloride 3.76 kg 8. Di-Methyl Formamide 1.18 kg A2786 Potassium Persulfate 1 kg 1. Potassium Sulfate 0.710 kg A2787 2, 4-Dimethyl-3- Pentyloxy Phthalo dinitrile (Alkoxy-Dinitrile) 1 kg 1. 2,4 Dimethyl 3 Pentanol 0.738 kg 2. Sodium hydride (60% dispersion in Paraffin wax) 0.254 kg 3. Tetra Hydro Furan 0.748 Litre A2788 1,1 Dimethyl-3-Hydroxy-Butyl Peroxy Neo-Heptanoate 1 kg 1. Hexylene Glycol 0.336 kg 2. Neo Heptanoyl Chloride 0.354 kg 3. Hydrogen Peroxide 50% 0.197 kg 4. Odourless mineral spirit 0.435 kg A2789 Lead Stearate Based PVC Stabilizer 1 kg 1. Lead Ingots 0.287 kg 2. Stearic Acid 0.742 kg 3. Relevant Wax Net to net Note: The above norms are on 100% Lead Stearate basis. For formulated product containing Lead Streate of different percentage, the requirement of inputs may be worked out on pro-r Annexure "C" to the Public Notice No. 45 Dated: 01/11/2001 ENGINEERING PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed C1700 SRM-9000, (Radio Frequency Assembly) 1 No 1. Integrated Circuits (IC) 2600 Nos. 2. Capacitor: 2. (i) Ceramic 32294 Nos. 2. (ii) Polyfilm 900 Nos. 2. (iii) Tantalum 4300 Nos. 3. Shieldtray 100 Nos. 4. Shield Cover 100 Nos. 5. PCBs 100400 Nos. 6. Connectors 100 Nos. 7. Transistors 7100 Nos. 8. Diodes 4400 Nos. 9. Resistors (Film) 42000 Nos. 10. Inductors (Coil) 6895 Nos. 11. Transformers 100 Nos. 12. Thermister 100 Nos. 13. Solder Paste 2.30 kg. C1701 Ferro Calcium Cored Wire (Calcium Ferro wire) - Powder Specification to be indicated by the applicant 1 MT of powder content 1. Calcium Metal Granules 1.02 kg/kg content calcium in the export product 2. Iron Powder 1.015 kg/kg content of Iron in the export product C1702 Silver Alloyed Contacts (containing silver more than 50% and other alloying metals) 1 kg 1. Un-wrought silver having purity more than 99.95% 1.03 kg/kg content of silver in the export product 2. Any other relevant alloying metal 1.03 kg/kg content of relevant alloying metal in the export product C1703 Lacquered Electrolytic Tin Plate Sheet 1 kg 1. Eletrolytic Prime Quality Tinplate of relevant thickness 1 kg 2. Relevant Lacquer 0.01 kg C1704 Copper Clad/ Coated Steel Wire: Single or stranded having single wire less than 0.5 mm dia 1 kg 1. Copper Clad/ coated Steel wire more than 1 mm diameter 1.02 kg 2. Wire Drawing Dies, Drawing Lubricants welding Dies 2% of the FOB value of export 3. Plastic Bobbins, Plastic Spools, protecting paper/films As per packing policy C1705 1.Resistance Wire: single or stranded or wound on Fibre Glass Core having single wire less than 0.5 mm, using a) Copper Nickel Alloy(s) Or b)Nickel Chromium Alloy(s) 1 kg 1. (a) Copper Nickel Alloy Wire 1.00 mm or more diameter 1.00 kg or 1. (b) Nickel Chromium Alloy Wire 1.00 mm or more diameter 1.00 kg 2. Alloy Master batches/ Wire Drawings Dies/ Welding Dies Glass Fibre Yarn 2% of the FOB value of export 3. Plastic Bobbins, Plastic Spools, Protective Paper/ film, Drawing Lubricants As per Packing Policy Note: Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b) C1706 Pump set with AC SQ Induction Motor 1 set 1. AC SQ Induction motor of relevant wattage speed 1 No. C1707 AA Alkaline Battery (24 gms) 1 No. 1. Electrolytic Manganese Dioxide 10.34 gms 2. Zinc Powder 4.12 gms 3. Potassium Hydroxide Flakes 1.6 gms 4. Zinc Oxide Powder 0.07 gm 5. Crystalline Graphite Powder/ Synthetic/ Natural Graphite 0.628 gm 6. Gallant Powder/ Galling Agent I II 0.043 gm 7. Indium Acetate Powder 0.0024 gm 8. Sealent/Asphati Piton C/A P/T 0.04 gm 9. Surfactant 0.0002 gm 10. Paper for Laminated Non-woven Separator / (Main Bottom) 0.172 gm 11. Nickel Plated Steel Cane 1 No. OR 11. Non Alloy Steel Sheet 5.9 gms 12. Tin Plated Brass Wire/ Conductor 0.43 gm 13. Nylon/Plastic Top 1 No. 14. Re-inforcing Support Ring 1 No. OR 14. Non Alloy Steel Sheet 1.26 gms 15. Negative Steel Cap 1 No. OR 15. Non Alloy Steel Sheet 0.42 gms 16. PVC Shrink Foil/ Shrink Sleeve As per packing policy 17. PVC Label 1 No. OR 17. Self-Adhesive PVC Sheet for Label 4.2 sq.inch. 18. Duplex Board for Packing As per packing Policy 19. Carbon Coating/ Carbon Paste 0.026 gms 20. NS Clean} 1% of FOB if non alloy steel sheet for cap, can ring are imported. 21. Press Oil } C1708 Cooling Tower complete including in completely knocked down condition, with or without accessories and other parts 1 No. (weight alongwith contents of various inputs to be indicated) 1. Isopthalic Polyester Resin 630 gm/kg GRP Component content in the export product 2. Glass Roving/ chopped strand mat/surface mat/ woven rovings 420 gm/kg GRP component content in the export product 3. Polypropylene 1.05 kg/kg polypropylene component content in the export product 4. PVC Fill Sheet 1.05 kg/kg PVC fill sheet component content in the export product OR The following inputs with their quantity for making 1 kg of PVC fill sheet:- a. PVC Resin (Suspension Grade) 0.945 kg b. Titanium Dioxide 0.060 kg c. Processing Aid 0.011 kg d. Impact Modifier 0.014 kg e. Paraffin Wax 0.005 kg f. Calcium Citrate 0.003 kg g. Lubricant/ Heat Stabiliser 0.038 kg h. Filler (Calcium Carbonate) 0.021 kg i. Carbon Black 0.002 kg 5. Relevant Bearings Net to net basis with accountability clause C1709 Suspension Hanger made of stainless steel wire- Grade AISI 302 1 kg 1. Stainless Steel wire Rods - Grade AISI 302 1.02 kg/kg content in the export product C1710 Polyesterimide Enamelled copper Wire/Strip 1 kg 1. Copper wire Rod / cathodes 1.01 kg/kg content in the export product 2. Polyestermide enamel 1.01 kg/kg content in the export product Annexure "D" to the Public Notice No. 45 Dated: 01/11/2001 FOOD PRODUCTS Sl.No. Export Item Qty. Import Item Qty Allowed E105 Pan Masala 1 kg 1. Betal Nut 740 gms. 2. Catechu 90 gms. 3. Natural Essential Oil 15 gms 4. Saffron 01 gm 5. Cardamom 15 gms