Amendments in the Handbook of Procedures, Vol.2, 2004-2009 - DGFT - 50 /2006

Amendments in the Handbook of Procedures, Vol.2, 2004-2009 PUBLIC NOTICE NO. 50/2006 Dated 31/08/2006 In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of Handbook of Procedures (Vol.1), the Director General of Foreign Trade hereby makes the following amendments in the Handbook of Procedures, Vol.2, 2004-2009 ( as amended from time to time). In the statement of Standard Input Output Norms as contained in the Handbook of Procedures, (Vol.2) 2004-2009, the amendments/ deletions/ corrections/ additions are made at appropriate places as mentioned in Annexure "A" to this Public Notice . In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After the existing entry at A-3621, new entries at Sl. No. A-3622 to A- 3625 are added as per Annexure "B" to this Public Notice. This issues in public interest. ( K. T. CHACKO ) DIRECTOR GENERAL OF FOREIGN TRADE (F.No.01/87/171/00001/AM06/DES-VIII) Annexure "A" to the Public Notice No. 50 dated 31 /08/2006 Sr. No. Page No. Reference Amendments/Corrections 1 2 3 4 1 A2 Chemicals and Allied Product SION at Sl.No. A- 26 The norm covered by this entry is amended to read as under:- Sr.No. Export item Qty. Import Item Qty. allowed A26 CMIC Chloride 1 kg (1) Ortho Chloro Benzaldehyde 1.06 kg (2) Hydroxylamine Sulphate 0.75 kg (3) Methyl Aceto Acetate 2.00 kg (4) Sodium Carbonate 0.72 kg (5) Phosphorus Pentachloride 0.91 kg (6) Sodium Hydroxide (Caustic Soda Flakes) 0.49 kg (7) Chloroform 1.51 kg (8) Methylene Chloride/Toluene 2.20 kg (9) Methanol 3.94 kg 2 A22 Chemicals and Allied Product SION at Sl.No. A-187 The norm covered by this entry is amended to read as under:- Sr.No. Export item Qty. Import Item Qty. allowed A-187 DICMIC Chloride 1 kg (1) 2,6 Dichloro Benzaldehyde 0.90 kg (2) Hydroxylamine Sulphate 0.60 kg (3) Methyl Aceto Acetate 0.52 kg (4) Phosphorus Pentachloride 0.77 kg (5) Sodium Hydroxide (Caustic Soda Flakes) 0.37 kg (6) Sodium carbonate 0.40 kg (7) Sodium Methoxide 0.50 kg (8) Chloroform 1.47 kg (9) Methylene Chloride / Toluene 1.56 kg (10) Methanol 3.94 kg 3. A101 Chemicals and Allied Product SION at Sl.No. A-1154 The following new import item is added : "3. Boric Acid - 0.550 kg" 4. A110 Chemicals and Allied Product SION at Sl.No. A-1316 The description of import item at Sl.No. 1 is amended to read as "Denatured Ethyl Alcohol (Purity not more than 98%)" 5 A128 Chemicals and Allied Product SION at Sl.No. A-1579 1. The following is added in description of the export product after "/Drawing Book" : "/Ruled paper sheets cut to various sizes'' 2. The following foot note is added to SION A- 1579 :- " Note : 3 Against the export of "Ruled Sheets cut to various sizes", import of items at Sl.No. 4 to 7 will not be Permitted 6 A148 Chemicals and Allied Product SION at Sl.No. A-1739 The description of import items at Sl.No. 1 is amended as under: "1.Coconut Oil (Industrial Grade)/Palm Kernel Oil" 7 A153 Chemicals and Allied Product SION at Sl.No. A-1778 The SION entry A- 1778 stands deleted as the same is appearing at Sr.No. A-3598 (Notified vide Public Notice No. 82 dated 16.1.2006) 8 A164 Chemicals and Allied Product SION at Sl.No. A-1889 The description of import item at Sr.No. 4 is amended to read as " RFO/FO/HPS" 9 A180 Chemicals and Allied Product SION at Sl.No. A-2079 The description of import item at Sl.No. 1 is corrected to read as " Ethoxy Methylene Malonic Acid Ester (EMME)" 10 A204 Chemicals and Allied Product SION at Sl.No. A-2323 The norms covered by this entry is amended to read as under:- Sr.No. Export item Qty. Import Item Qty. allowed A-2323 FCMIC Chloride 1 kg (1) 2-Fluoro 6 Chloro Benzaldehyde 1.141 kg (2) Hydroxylamine Sulphate 0.76 kg (3) Methyl Aceto Acetate 1.09 kg (4) Sodium Hydroxide 1.075 kg (5) Phosphorus Pentachloride 0.84 kg (6) Sodium Carbonate 0.45 kg (7) Chloroform 1.345 kg (8) Methylene Chloride / Toluene 0.70 kg (9) Methanol 3.94 kg 11. A215 Chemicals and Allied Product SION at Sl.No. A-2477 The SION entry stands deleted. 12 A229 Chemicals and Allied Product SION at Sl.No. A-2669 The quantity of import item at Sl.No. 1 is amended to read as " 0.744 kg" 13 A261 Chemicals and Allied Product SION at Sl.No. A-3035 The norm covered by this entry is amended to read as under:- Sr.No. Export item Qty. Import Item Qty. allowed A-3035 Propyphenazone (Iso Propyl Antipyrine 1 kg 1. Phenyl Hydrazine Sulphate OR 1.30 kg 1(a) Aniline oil 1.316 kg 1(b) Sodium Nitrite 1.105 kg 2. Methyl Aceto Acetic Ester 1.44 kg 3. Isopropyl alcohol 1.48 kg 4. Methylene Chloride 0.75 kg 5. Acetone 1.53 kg 14 B67 Electronics products SION at Sl.No.B-231 The norm covered by this entry is amended to read as under:- Sl.No. Export item Qty. Import item Qty. allowed B-231 Personal Computers 1 No. 1. Chassis/Cabinet 1 No. 2. Mother Board 1 No. 3. Floppy Disc Drive 1 No. 4. Relevant Storage Device (HS 8471.70) 1 No. 5. Relevant Hard Disc Drive 1 No. 6. Switch Mode Power Supply 1 No. 7. Microprocessor (CPU) 1 No. 8. Relevant Memory Module 1 No. 9. Monitor 1 No. 10. Mouse 1 No. 11. Key Board 1 No. 12. Add on cards Net to Net 13. UPS Net to Net 14. Web Camera Net to Net 15. Multimedia Speakers Net to Net 16. Microphone Net to Net 15 C7 Engineering Products SION at Sl.No. C-122 The foot note No. 7 given below at SION at Sr.No. C- 122 is amended to read as under: "7. However if weight of Bicycle components exceeds by 10% , the same may also be considered by RLA on pro-rata basis. This note is applicable to SIONs at Sr.Nos. C-31 to C-56, C-58 to C-92 and C-94 to C-122" 16 C14 Engineering Products SION at Sl.No. C-171 The following foot note is added:- "Norms covered by Sl.Nos. 168 to 171 above will also be applicable to shipment of products in SKD condition provided the exporter submit necessary proof of export of complete ceiling fans covered by various shipping bills at the time of closure of DEEC book/Redemption of Bond /LUT" 17 C71 Engineering Products SION at Sl.No. C-495 The norm covered under this SION entry is amended as under:- Sl. No. Export Item Qty Name of import item Quantity allowed C 495 Hot Rolled Non-alloy/ Alloy / Stainless Steel Sheets/ Strips/ Wide Coils 1 Tonne 1. Slabs of relevant grade of Non-alloy/ Alloy/ Stainless Steel OR 1030 Kg. 1. Ingots of relevant grade of Non-alloy/ Alloy/ Stainless Steel. 1050 Kg. 2. CI/ Steel Rolls for Hot Rolling Mill 0.60 Kg. (if input is slab) 1.20 Kg. (if input is ingot) 3. Steel Shots 5.5 Kg. 4.Relevant Shear Blades/Saw Blades 0.01 Kg. 5.Relevant Fuel (for fuel fired re-heating furnace ) 2,61,000 K.Cal 6.Relevant fuel for electric power for hot rolling mill auxiliaries (for units with captive power plant /source only) 2,17,500 K.Cal Note 1 : The quantity of fuel for power generation (i.e 2,17,500K.Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2 : The quantity of fuels (in K.Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K.Ltr.) may be worked out by dividing the K.Cal. figures given in the SION by the actual unit heat value of the imported fuel. 18 C77-C78 Engineering Products SION at Sl.No. C-512 The description of import item at Sl.No. 3 (u) under heading " (ii) MISC.ITEMS:" is amended to read as under:- " Monolithic Refractory Viz. Castable, Gunning Mass Ramming Mass and /or Dead Burnt/ Sea Water/Fused Magnesia for Captive use for manufacture of Monolithic Refractory" 19 C83 Engineering Products SION at Sl.No. C-524 The norm covered under this SION entry is amended as under:- Sl. No. Export Item Qty Name of import item Quantity allowed C 524 Stainless Steel Bars Rods (including Rounds, Flats, Wire Rods etc. but excluding Bright Bars), Angles, Shapes and Sections (including special profiles) 1 Tonne 1. Blooms/ Billets of relevant grade of stainless steel OR 1030 Kg. 1. Ingots of relevant grade of Stainless Steel 1050 Kg. 2. CI/ Steel Rolls for Hot Rolling Mill : 0.60 Kg. (if input is slab) 1.20 Kg. (if input is ingot) 3. Relevant Shear Blades/ Saw Blades 0.01 Kg. 4. Relevant Fuel (for fuel fired re-heating furnace only) 2,61,000 K.Cal 5. Relevant fuel for electric power for hot rolling mill auxiliaries (for units with captive power plant /source only) 2,17,500 K.Cal Note 1 : The quantity of fuel for power generation (i.e 2,17,500K.Cal.) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2 : The quantity of fuels (in K.Cal.) allowed in the SION correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K.Ltr.) may be worked out by dividing the K.Cal. figures given in the SION by the actual unit heat value of the imported fuel. 20 C83 toC85 Engineering Products SION at Sl.No.No. C-525 The norm covered under this SION entry is amended as follows: Sl. No. Export Item Qty Name of import item Quantity allowed C 525 Stainless Steel (Excluding Exhaust Valve Steel ) Semi-finished Products (Blooms, Billets Slabs) and Ingots: 1 Tonne 1.Major Inputs : In Kg (a) Non-alloy Steel Melting Scrap, Pig Iron, Sponge Iron including Hot Briquetted Iron (HBI) As per Note 2. 2.Additives (Ferro Alloys/ Metals/ Compounds) : (In Kg per Kg. content of alloying element in the export product) (a)(i) Ferro Silicon (Si : 75%) 1.43 (a)(ii) High Carbon Ferro Manganese (Mn : 75%) OR 1.43 (a)(ii) Manganese Metal 1.04 (b) Charge Chrome, High Carbon Ferro Chrome (Cr : 60%) Or 1.79 (b) Low Carbon Ferro Chrome (Cr : 70%) 1.53 (c) Unwrought Nickel (Ni : 99%) Or 1.04 (c) Ferro Nickel, Nickel Oxide Sinter (Ni : 40%) 2.58 (d) Lead (Pb : 99%) Scrap/ Shots/ Wires/Powder in cored wire 1.60 (e) Ferro Molybdenum (Mo: 65%) Or 1.58 (e) Molybdenum Oxide (Mo : 60%) 1.89 (f) Ferro Titanium (Ti : 70%) 2.43 (g) Ferro Tungsten (W: 75%) 1.38 (h) Any other Nobel/ Special Ferro-alloys (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.) 1.38 (i) Any other Metal (not present in aforesaid ferro-alloys) in unwrought or wrought form or in powder form or powders in cored wires 1.04 (j) Sulphur stick / Sulphur powder in cored wire 2.00 3.Consumables/ Misc. Inputs : In kgs (a) Ferro-Silicon (Si: 75%) ( for de-oxidation/ Reduction) 20 (b) Graphite Electrodes (For units with EAF Furnace only) 4 (c) Relevant CI, Steel Rolls for Hot Rolling Mill/Continuous Casting Machine (against export of rolled products only) 0.6 (d) Relevant Copper lined Moulds, Copper Moulds/ Tubes for Continuous Casting (if export product is produced through Continuous Casting route with/ without further rolling) 0.01 (e) Casting Powder 1 (f) Aluminium wires, Notched bars, scraps, shots, ingots, Dross, Powder in Cored Wire and Ferro Aluminium. 2 (g) CaSi Lumps, CaF Lumps, Powder of CaFeAl, caf , CaSi in Cored wire. 0.1 (h) Rolling Mill Oil, Hydraulic Oil, Lubricating Oil (against export of rolled products only) 0.5 (i)Celox Inserts, Temperature Tips, Oxygen Probes, Sampler Probes, Sampler Tips. 0.1 (j) Relevant Shear Blades, Saw Blades. 0.01 (k) Oxygen Lance pipes, Sub-merged tuyers, Atmospheric injector 0.1 (l) Calcium Carbide 0.5 (m) Low silica Calcined lime/ lime stone 100 (n) Refractories: i) Relevant Shaped Refractories ( Fired/Un-fired Bricks/Shapes) 20 ii) Relevant Monolithic Refractories (including Castables, ramming mass, gunning mixes) 4 iii) Relevant Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles Tundish Nozzles 1 (o) Calcined /Raw Petroleum coke 10 4.Energy Sources: (a) Relevant fuel for electric power for Steel making and Auxiliaries (for units with captive power plant/ source only) 10,00,500 K. Cal (b) Relevant Lubricant for captive power plant 1 Kg. (c) Relevant fuel for fuel fired re-heating furnace(if only if export product is supplied in rolled condition) 2,61,000 K. Cal (d) Relevant fuel for electric power for hot rolling mill auxiliaries (if only if export product is supplied in rolled condition) 2,17,500 K. Cal (e) Relevant fuel for ladle / tundish/ ferro-alloy heating 35,000 K. Cal (f) Relevant fuel for Boilers for VOD ( to units having VOD facilities only) 1,30,500 K. Cal Note 1 : This norm is applicable for export product manufactured adopting Electric Arc Furnace/ Electric Induction Furnace using Non-alloy Steel Melting Scrap as the basic input. Note 2 : The total quantity of imported inputs allowed against Sl.No. 1(a) and Sl No 2 shall be limited to 1115 Kg. Further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1(a), if any, shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein. Note 3: Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parenthesis against each alloy. If the percentage of alloying element in the ferro-alloy is higher/ lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note 4 : For a given alloying element in steel, wherever two alternate ferroalloy / metals /compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note 5: Alloying element(s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the maximum value of the respective alloying element(s) in the export product shall be taken into consideration. 1 [ Note 6: Import of Stainless Steel Melting Scrap of known chemical composition may be permitted within the overall quantity of item no. 1(a) but upto 90% to Induction Furnace units having AOD/VOD facilities and Electric Furnace units. For units having Induction Furnaces without AOD/VOD, import of stainless steel melting scrap will however, be permitted within the overall quantity of item No. 1(a) but upto 60% only. Only such grade of Stainless Steel Melting Scrap will be allowed that is relevant to the export product. In such a case, quantity of respective ferroalloy/metal to be allowed as per formula at Sl.No. 2 will have to be reduced to account for the recoverable alloying element(s) (Nickel, Copper, Chromium and Vanadium) present in the stainless steel scrap. The reduced quantity of these ferroalloys/metals shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity to be worked out as per formula at Sl. No. 2 in the SION read with Note 3: Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 1.115 x % of relevant element in ferroalloy/metal/compound ] Note 7: The specified quantities of energy sources/ fuel for electric power generation(in K.Cal) against import item 4(a) 4(c) which correspond to electric power consumption of 500 and 100 KWH per tonne of export product have been allowed assuming that Captive Power Plant (CPP)/Source of matching capacity exist. In case CPP/source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 8: Quantity of energy sources/ fuels (in K.Cal) correspond to a fuel having unit heat value of 8700 K.Cal. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be worked out by dividing the K.Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 9 : Import of items at Sl.No. 3(b), (c), (d), (i), CC Refractories under 3(n) (iii) and 4(c) shall not be permitted against export of steel ingots. Note 10 : The Item "Low Carbon Ferro Chrome" under 2(b) above is to be allowed only to manufacturers not having Argon Oxygen Decarburisation (AOD) and Vacuum Oxygen decarburization (VOD) . However, this input may be allowed @ 80 kg (max) to units with only VOD facilities and @10 Kgs (max) to units with only AOD facilities. 21 C85 Engineering Products SION at Sl.No. C-526 The import items covered under this SION entry are amended with Notes as under: Name of import item Quantity allowed 1.HRSS Wide Coils / Strips of relevant grade. 1075 Kg. 2.PVC Film (with glue) As per packing Policy 3.Relevant Steel Shots (only against export product in short blasted condition) 5 Kg 4.Kraft Inter-leaving Paper . As per Packing Policy 5.Ditamacous Earth 0.4 Kg 6.Relevant CI / Steel Rolls for Cold Rolling Mill 0.6 Kg 7.Furnace Oil or other Relevant Fuel for electric power for CRM Auxiliaries ( for units with Captive Power plant/Source only) 140 Kg Furnace Oil OR 12,18,000 K.Cal other relevant fuel(s). 8.LPG or other Relevant fuel for annealing furnace (against export of annealed products only) 60 Kg LPG. Or 6,24,000 K.Cal other relevant fuel(s). Note 1 : Import of energy sources/ fuel(s) as at Sl. No. 7 8 of the import list may be permitted provided the fuel is relevant to the installed facilities in a given unit. Quantity of such fuel (in Kgs./ cubic meters/ K. liters) other than Furnace oil LPGs may be worked out by dividing the specified K.Cal figures given in the SION by the actual unit heat value of the imported fuel. Note 2 : The specified quantity of energy sources (in K.Cal) for electic power generation for cold rolling mill, which corresponds to 600 KWH/ tonne of export product, have been allowed assuming captive power plant/ source of at-least matching capacity exist. In case, the CPP/ source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note-3: In case the export product is Circle/circular blanks punched out from CR Stainless Steel Sheets/Strips/Wide coils, the quantities of imported inputs will increase which may be obtained by multiplying the given quantities by a factor of 1.16. 22 C200 to C201 Engineering Products SION at Sl.No. C-1503 (amended vide Public Notice No. 40 dated 17.8.05) The description of export product is amended to read as "Continuous cast copper rod/copper wire rod/cathode" 23 C225to C227 Engineering Products SION at Sl.No. C-1647 The following new item is added as Sl. No. 15 under heading "MISC.ITEMS" :- "15. Relevant Chemicals" 24 C234 to C235 Engineering Products SION at Sl.No. C-1670 The import item and quantity against Sl.No. 2 under the SION entry is amended as under: "2. Molecular Sieve (Powder/Pellet)/Silica Gel Powder - Net to Net" 25 C235 Engineering Products SION at Sl.No. C-1671 1. The import item and quantity against Sl.No. 2 under the SION entry is amended as under: "2. Molecular Sieve (Powder/Pellet)/Silica Gel Powder Net to Net" 2. Following new import items are added after Sl.No. 5: "6. Gear Motor 1 No. 7. Speed Controller for Motor 1 No." 26 C282 Engineering Products SION at Sl.No. C-1925 The quantity of import item at Sl.No. 3 Viz Quartz Tube for Exhaust OVISIL 452 3.9-4.1/2.02 is amended to read as "Net to Net " 27 C282 Engineering Products SION at Sl.No.No. C-1926 The quantity of import item at Sl.No. 3 Viz Quartz Tube for Exhaust OVISIL 452 3.9-4.1/2.02 is amended to read as "Net to Net " 28 C292 Engineering Products SION at Sl.No.No. C-1985 The SION entry stands deleted. 29 Engineering Products SION at Sl.No. C-2034 (Notified 1. "Table X (New additional Table No. to be allotted)" mentioned under Col." Qty. allowed" against Sl.No. 2 of the import item is corrected to read as " Table No. 12"vide Public Notice No. 32 dated 13.7.2006) 1. "Table X (New additional Table No. to be allotted)" mentioned under Col." Qty. allowed" against Sl.No. 2 and 3 of the import item is corrected to read as " Table No. 12" 2. "Table XX (New additional Table No. to be allotted)" mentioned under Col." Qty. allowed" against Sl.No. 4 of the import item is corrected to read as " Table No. 13" 3. Accordingly, "Engineering Table - 12" and Engineering Table - 13" have been assigned. 30 E6 Food Products SION at Sl.No.E79 The following foot note is added under this SION entry: "The chemicals allowed for import at Sl.No. 4 to 14 above should be permitted for import only with Actual User condition". 31 E8 Food Products SION at Sl.No. E106 The following foot note is added under this SION entry: "The chemicals allowed for import at Sl.No. 4 to 11 above should be permitted for import only with Actual User condition. 32 Food Products SION at Sl.No. E123 (Notified vide Public Notice No. 64 dated 24.10.2005) 1.The description of the export product is amended to read as "Bakery Shortening /Hydrogenated Vegetable Fat (Vanaspati)" 2. The quantity of import item No. 1 is amended to read as " 1.038 MT" 33 H24 Plastic Products SION at Sl.No. H-216 (Amended vide Public Notice No. 70 dated 29.11.2005) The following note is added: - "Note: For different %age of resin content the requirement of import item no. 1 to 5 may be worked out on pro-rata basis. For item No. 6 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 34 H25 Plastic Products SION at Sl.No. H-236 The following note is added: - "Note: For different %age of resin content the requirement of import item no. 1 to 4 may be worked out on pro-rata basis. For item No. 5 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 35 Plastic Products SION at Sl.No. H-550 (Notified vide Public Notice No. 20 dated 09.06.2005) (i) The description of Import Item at Sl.No. 5 is amended to read as "Ethyl Acetate/Methyl Ethyl Ketone (Relevant)". (ii) The following note is added: - " Note: For different %age of resin content the requirement of import item no. 1 to 4 may be worked out on pro-rata basis. For item No. 5 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 36 Plastic Products SION at Sl.No. H-551 (Notified vide Public Notice No. 20 dated 09.06.2005) (i) The description of Import Item at Sl.No. 6 is amended to read as "Ethyl Acetate/Methyl Ethyl Ketone (Relevant)". (ii) The following note is added: - "Note: For different %age of resin content the requirement of import item no. 1 to 5 may be worked out on pro-rata basis. For item No. 6 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 37 Plastic Products SION at Sl.No. H-552 (Notified vide Public Notice No.20 dated 09.06.2005) (i) The description of Import Item at Sl.No. 2 is amended to read as " Isophthalic Acid" (ii) The description of Import Item at Sl.No. 6 is amended to read as "Ethyl Acetate/Methyl Ethyl Ketone (Relevant)". iii) The following note is added: " Note: For different %age of resin content the requirement of import item no. 1 to 5 may be worked out on pro-rata basis. For ityem No. 6 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 38 Plastic Products SION at Sl.No. H-553 (Notified vide Public Notice No. 64 dated 24.10.2005) (i) The description of import item at Sl.No. 13 is amended to read as " Toluene Di-isocyanate / 4.4 Diphenyl Methane Diisocyanate (Relevant)" (ii) The following Notes are added after the existing note: "Note No. 2 : In respect of import items against export product (A) ( i.e Import items 1 to 6) , For different % age of resin content the requirement of import item no. 1 to 5 may be worked out on pro-rata basis. For item No. 6 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". "Note No. 3 : In respect of import items against export product (B) ( i.e Import items 7 to 13) , For different % age of resin content the requirement of import item no. 7 to 11 and 13 may be worked out on pro-rata basis. For item No. 12 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 39 Plastic Products SION at Sl.No. H-554 (Notified vide Public Notice No. 64 dated 24.10.2005) (i) The description of Import Item at Sl.No. 9 is amended to read as "Ethyl Acetate/Methyl Ethyl Ketone (Relevant)" ii) The following Notes are added after the existing note: "Note No. 2: In respect of import items against export product (A) ( i.e Import items 1 to 4 , For different % age of resin content the requirement of import item no. 1 to 3 may be worked out on pro-rata basis. For item No. 4 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". "Note No. 3: In respect of import items against export product (B) ( i.e Import items 5 to 9) , For different % age of resin content the requirement of import item no. 5 to 8 may be worked out on pro-rata basis. For item No. 9 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 40 Plastic Products SION at Sl.No. H-555 (Notified vide Public Notice No. 70 dated 29.11.2005) The following Note is added: " Note: For different %age of resin content the requirement of import item no. 1 to 3 may be worked out on pro-rata basis. For item No. 4 i.e solvent, the requirement may be worked out in inverse ratio depending on solvent content/ percentage". 41 J16 Textiles Product SION at Sl.No. J-123 1.The description of export item is amended to read as "100% Natural Silk (Chiffon/Chinnon/Crepe/ Georgette/Taffeta/Satin) Fabrics/ Made-ups/Sarees" 2. The description of import item at Sl.No. No. 1 is amended to read as under: "Mulberry Raw Silk (Gummed) of any grade (other than Dupion Yarn)" 42 Page 36 to 37 GENERAL NOTES FOR TEXTILE PRODUCTS (CODE : J) The following Note is added as Sl.No. 16: "While granting Advance Authorization/Advance Authorization for Annual Requirement, the applicant must furnish the specific names of made-ups, their specification, sizes and Qty. in Nos." 43 Page 36 to 37 GENERAL NOTES FOR TEXTILE PRODUCTS (CODE : J) The following Note is added as Sl.No. 17: "Under Para 4.7 of the Handbook of Procedures (Vol.1), it is essential to justify the requirement of fabric by giving specific sizes with quantity of export products, calculation sheets, CAD-CAM/LAY MARKER" 44 K15 Miscellaneous . products SION at Sl.No. No.K-125 The norm covered under this entry is amended as follows: Sr.No. Export item Qty. Import Item Qty. allowed K125 a) Coconut Oil Edible Grade in HDPE Drums /Jerry Cans (FFA 0.5% Max.) conforming to specifications laid down in PFA Act OR 1 Ltr. Coconut Oil in Ship hold (FFA 3% to 6% 1.065 Ltr. b) Coconut Oil Edible Grade in Tankers/Flexi Tanks (made of food grade material) (FFA-0.5% maximum) conforming to specifications laid down in PFA Act. 1 Ltr. Coconut Oil in Ship hold (FFA 3% to 6% 1.040 Ltr. Annexure "B" to the Public Notice No. 50 dated 31.08.2006 Chemicals and Allied products Sl.No. Export item Qty. Import item Qty. allowed A-3622 Mirtazapine (From 1-Methyl 3 phenyl piperazine route 1 kg (1) 1-Methyl 3 phenyl piperazine 1.64 kg (2) 2-Chlore Nicotinonitrile 1.29 kg (3) Dimethyl Formamide 4.50 kg (4) Chloroform 6.50 kg (5) Sodium Bis (2-Methyoxyethoxy) Aluminium Hydride (Vitride) 2.97 kg (6) Di-isopropyl Ether 3.34 kg A-3623 2-Bromopyridine 1 kg (1) Pyridine 1.05 kg (2) Sodium Bromide 1.40 kg (3) Caustic Soda 2.40 kg A-3624 2,6 Dichloropyridine 1 kg Pyridine 0.742 kg A-3625 Lube Oil Base Stock - 500 N ( LOBS) 1 kg Crude Oil (Mineral Oil) 1.76 kg ------------------------------------------------- Notes:- 1. Amended vide Public Notice No. 150/2008, dated 25/02/2009 , before it was read as:- Note 6: Import of Stainless Steel Melting Scrap of known chemical composition may be permitted within the overall quantity of item no 1(a) but up to 60 % and 90% respectively to Induction Furnace and Electric Furnace based units. In such a case, quantity of respective ferroalloy/metal to be allowed as per formula at Sl No 2 will have to be reduced to account for the recoverable alloying element (s) ( Nickel, Copper, Chromium and Vanadium) present in the stainless steel scrap. The reduced quantity of these ferroalloys/metals shall be obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following formula from the total quantity to be worked out as per formula at Sl No 2 in the SION read with Note 3: Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 1.115 X % of relevant element in ferroalloy / metal / compound