Amendments/additions/deletions/corrections in the Handbook of Procedures, Vol. II, 2004-2009. - DGFT - 168 (RE:2008)/2004-2009

Amendments/additions/deletions/corrections in the Handbook of Procedures, Vol. II, 2004-2009. (TO BE PUBLISHED IN THE GAZETTE OF INDIA EXTRAORDINARY PART-I-SECTION-1) GOVERNMENT OF INDIA MINISTRY OF COMMERCE INDUSTRY DEPARTMENT OF COMMERCE PUBLIC NOTICE NO. 168 (RE:2008)/2004-2009 NEW DELHI: DATED: 31/03/2009 In exercise of the powers conferred under Paragraph 2.4 of the Foreign Trade Policy, 2004-09 and Paragraph 1.1 of the Handbook of Procedures (Vol.1) , the Director General of Foreign Trade hereby makes the following amendments/ additions/deletions/corrections in the Handbook of Procedures, Vol. II, 2004-2009, as amended from time to time 2. In the statement of Standard Input Output Norms, following additions shall be made at appropriate places as mentioned below:- After existing SION entry at Sl. No. H561, new entries at Sl. Nos. H562 to H568 are added as per Annexure "A" to this Public Notice (P.2-4). This issues in public interest. (R. S. Gujral) Director General of Foreign Trade and ex-officio Additional Secretary to the Government of India (Issued from F.No.01/87/171/00002/AM09/DES-VII) ANNEXURE "A" to the Public Notice No. 168(RE: 2008)/2004-2009 Dated: 31.03.2009 Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H562 HDPE Net Impregnated with Alpha Cypermethrin 0.55% 1 kg 1. HDPE Granules 1.080 kg 2. Alpha Cypermethrin 25% Granuals 0.026 kg Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H563 Polyurethane Resin Solution Containing 80% Resin Content and 20% Solvent) 1 kg 1. Adipic Acid 0.291 kg 2. Isophthalic Acid 0.116 kg 3. Phthalic Anhydride 0.167 kg 4. Diethylene Glycol 0.079 kg 5. Monoethylene Glycol 0.199 kg 6. 1.6 Hexane Diol 0.012 kg 7. Trimethylol Propane 0.013 kg 8. Toluene Di Isocyanate 0.041 kg 9. Ethyl Acetate (Solvent) 0.200 kg Note: For different %age of Resin Content, the requirement of import item No. 1 to 8 may be worked on pro-rata basis. For item No. 9 i.e. Ethyl Acetate (Solvent) the requirement may be worked out in the inverse ratio depending on solvent content / % age. Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H564 Polyester Resin containing 100% Resin 1 kg 1. Phthalic Anhydride 0.303 kg 2. Diethylene Glycol 0.358 kg Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H565 Polyurethane Resin containing 100% Resin 1 kg 1. Polypropylene Glycol 0.213 kg 2. Diethylene Glycol 0.015 kg 3. Diphenyl Methane 4,4, Diisocyanate 0.348 kg 4. Toluene Di isocyanate 0.199 kg Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H566 Prepared Adhesives Based on Plastics (Two component laminating adhesives) (A) Adhesive (Polyurethane Resin containing 100% Resin) (B) Additive (Polyester Resin containing 100% Resin) 1 kg 1. Polypropylene Glycol 0.213 kg 2. Diethylene Glycol 0.015 kg 3. Diphenyl Methane 4,4, Diisocyanate 0.348 kg 4. Toluene Di isocyanate 0.199 kg 5. Phthalic Anhydride 0.303 kg 6. Diethylene Glycol 0.358 kg N.B. The item 1 to 4 is for 1 kg weight of Product A (Adhesive) and item 5 to 6 are for 1 kg weight of Product B (Additive). Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H567 Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent (General Purpose) 1 kg 1. Adipic Acid 0.221 kg 2. Phthalic Anhydride 0.243 kg 3. Monoethylene Glycol 0.216 kg 4. Toluene Di-Isocyanate 0.016 kg 5. Ethyl Acetate/Methyl Ethyl Ketone (relevant) 0.400 kg Note: For different %age of Resin Content, the requirement of import item No. 1 to 4 may be worked on pro-rata basis. For item No. 5 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / percentage. EXPORT ITEM QTY IMPORT ITEM QTY Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent (Ultrahigh Performance Chemical) 1 kg 1. Adipic Acid 0.124 kg 2. Isophthalic Acid 0.183 kg 3. Diethylene Glycol 0.212 kg 4. Monoethylene Glycol 0.030 kg 5. Toluene Di-Iso Cyanate 0.122 kg 6. Ethyl Acetate/Methyl Ethyl Ketone (relevant) 0.400 kg Note: For different %age of Resin Content, the requirement of import item No. 1 to 5 may be worked on pro-rata basis. For item No. 6 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / %age. EXPORT ITEM QTY IMPORT ITEM QTY Polyurethane Resin Solution @ 60% Resin Total Solid Content in Relevant Solvent Ultrahigh Performance Thermal) 1 kg 1. Adipic Acid 0.113 kg 2. Isophthalic Acid 0.159 kg 3. Diethylene Glycol 0.187 kg 4. Monoethylene Glycol 0.030 kg 5. Diphenyl Methane 4,4 Di Isocyanate (MDI) 0.173 kg 6. Ethyl Acetate/Methyl Ethyl Ketone (relevant) 0.400 kg Note: For different %age of Resin Content, the requirement of import item No. 1 to 5 may be worked on pro-rata basis. For item No. 6 i.e. solvent, the requirement may be worked out in the inverse ratio depending on solvent content / %age. Sl. No. EXPORT ITEM QTY IMPORT ITEM QTY H568 Phenol Formaldehyde Resin Solid/Lumps (100% Resin) 1 kg 1. Phenol 1.00 Kg. 2. Paraformaldehyde Powder/flakes 0.28 Kg. ----------------------------------------------- Notes:- 1. Also See PUBLIC NOTICE NO. 183 (RE:2008/2004-2009), dated 04.06.2009