Implementing Electronic Sealing for containers by exporters under self-sealing procedure prescribed by Circular 26/2017-Cus dated 1st July, 2017 and Circular 36/2017 dated 28th August, 2017 - Customs - PUBLIC NOTICE No. 39/2017

GOVERNMENT OF INDIA MINISTRY OF FINANCE: DEPARTMENT OF REVENUE OFFICE OF THE COMMISSIONER OF CUSTOMS PORT AREA, VISAKHAPATNAM - 530 035 F. NO. S2/08/2017-EDI Date: 26/09/2017 PUBLIC NOTICE No. 39/2017 Subject: Implementing Electronic Sealing for containers by exporters under self-sealing procedure prescribed by Circular 26/2017-Cus dated 1st July, 2017 and Circular 36/2017 dated 28th August, 2017. - reg. Attention of all the Importers, Exporters, Customs Brokers and the Members of the Trade is invited to Board's Circular No 26/2017-Customs dated 01.07.2017 36/2017-Customs dated 28.07.2017 and this office Public Notice No. 26/2017 dated 02.07.2017 and 36/2017 dated 05.09.2017 . In continuation to the Board circular 36/2017 -Customs dated 28.8.2017 regarding self-sealing procedure, the Board has prescribed the following procedures vide Circular No 37/2017 dated 28.08.2017 7 issued from F 2 Representations have been received from several associations seeking information on the availability of RFID Tamper Proof One-time-bolt container seals. Field formations have also sought guidance of the Board regarding the identity of vendors, availability of the electronic seals, web- based application and provisioning of readers at various ports / ICDs. 3. Several potential vendors have communicated with the Board field formations regarding availability of seals and their intention to provide reader devices (for reading the seals) at select or all ports/ICDs. 4. In order to ensure that electronic seals deployed are of a reliable quality, the Board has adopted international standards laid down under ISO 17712:2013 for high security seals and prescribed that vendors intending to offer RFID seals should furnish certifications required under the ISO standard (Refer para 3 of this office PN-36/2017 dated 06.09.2017) 4.1 To ensure uniformity in acceptance of the certificates submitted by vendors, required under ISO 17712:2013, it has been decided that ail vendors proposing to offer RFD Tamper Proof One- Time-Bolt Container Seals to exporters for self-sealing, must submit self-attested certificates from seal manufacturers to the Director (Customs), CBEC, North Block, New Delhi before commencing sales. Where the certification is found to comply with the requirements of the ISO standard, the names of such vendors shall be put up on the Board's website (www.cbec.gov.in) for ease of reference of the trade and field formations, as soon as they are received. 4.2 The vendors shall also produce a contract or communication between the vendor and manufacturer, to serve as a link document and undertake that the seals for which ISO certifications are submitted are the same seals pressed into service. 4.3 Any time a vendor changes his manufacturer-supplier, he shall provide the documentation referred in para 3 of this office PN-36/2017 dated 06.09.2017 to the Customs, before offering the seals for sale. 4.4 Clarifications have also been sought regarding the type/specification of the web-hosted application. While each vendor may develop and design their own web-enabled application, the data elements prescribed under para 4 (a) of this office PN-36/2017 dated 06.09.2017 have to be incorporated. For the purposes of consistency in process of communication with the customs stations and the RMD, each vendor shall provide information as specified in para 4 (b) of this office PN-36/2017 dated 06.09.2017 to the department by email in excel format or any other format that may be specified by any field formation or RMD. This would permit ease of consolidation of multiple feeds at the customs station and data integration. All field formations are advised to communicate the designation based email addresses to the vendors, once the list is placed on the website as mentioned at para 4.1 above. 4.5 As a measure of data integrity and security of sealing, vendors are also required to ensure that the Tag Identification (T ID) number is captured in their data base and the IEC code of the exporter is linked to the same at the time of sale of the seals. Upon reading at the Port / 'CD, the software application shall ensure that the seal's identity is checked with its T ID. Beyond this prescribed minimum feature, vendors will remain free to build upon any other features of RFID system for enhancing security / functionalities. 5. For the ease of reference of the exporters, vendors are advised to publicise on their website, name of each port / ICD where they have provided readers. Custodians and Customs brokers are also advised to proactively engage with vendors regarding availability of reading facilities at container terminals and ICDs so that there is no dislocation to logistics operations. 6. Considering the difficulties expressed by trade associations in locating vendors of RFID seals, the Board has decided that the date for mandatory self-sealing and use of RFID container seals is deferred to 1st November, 2017. The existing practice may continue till such time. It is also provided that exporters are free to voluntarily adopt the new self-sealing procedure based upon RFID sealing, if readers are in place at the customs station of export from 1.10.2017. 7. Apprehensions have been expressed by some associations and trade bodies regarding the availability of reading facilities in hinterland ICDs. In view thereof, custodians of ICDs are requested to facilitate the process of receiving handheld readers or installation of fixed readers at the ICDs and to approach this office in case readers are not made available by vendors at any ICD by 10th October, 2017. 8. Difficulties, if any, may be brought to the notice of the undersigned (Dr.DK SRINIVAS) COMMISSIONER OF CUSTOMS.