Revised SION's for the leather, leather products and footwear - DGFT - 30/2023

Government of India Ministry of Commerce Industry Department of Commerce Directorate General of Foreign Trade Public Notice No. 30/2023 New Delhi, 31 th August, 2023 Subject: Revised SION's for the leather, leather products and footwear In exercise of the powers conferred under Paragraph 1.03 and 2.04 of the Foreign Trade Policy (FTP), 2023 , as amended from time to time, the Director General of Foreign Trade hereby revises specific SION's for Leather, Leather Products and Footwear and Serial No.7 of General Note for Leather Leather Products as under: 1. Revision of SIONs: SION nos G3, G3 A-New Entry, G4, G5, G6, G7, G8, G9, G10, G11, G12, G13, G14, G15, G16, G17, G22, G23, G24, G25, G26, G27, G28, G29, G30, G31, G40, G43, G44, G45, G46 are revised as per Annexure 'A' to this PN. 2. Revision of General Note for Leather Leather Products: Serial No. 07 is revised as per Annexure 'B' to this PN. Effect of this Public Notice: Standard Input output Norms (SION's) for Leather, Leather Products and Footwear and General Note for Leather Leather Products stand amended with effect from 15.9.2023. Santosh Kumar Sarangi Director General of Foreign Trade Ex-officio Addl. Secretary to Government of India [Issued from File No. 01/84/171/00001/AM-24/DES-5] Annexure-A REVISED SION FOR FINISHED LEATHER, LEATHER PRODUCTS AND FOOTWEAR (SION Nos.- G3, G3 A-New Entry, G4, G5, G6, G7, G8, G9, G10, G11, G12, G13, G14, G15, G16, G17, G22, G23, G24, G25, G26, G27, G28, G29, G30, G31, G40, G43, G44, G45, G46) LEATHER PRODUCTS Sl. No Export Item Quantity Import Item Qty. Allowed G3 Children Leather Shoes 1 Pair 1 a) Synthetic Lining 1.25 sq.ft. b) Full Insole socks (Synthetic) 0.30 sq.ft. c) Adhesive (PU/Latex/Neoprene) 15 gms. d) Shoe finishes (Polish) 3 gms. e) Shoe finishes (spray) 6 gms. f) Stamping Foil 6 sq. inches g) Sewing Threads 12 mtrs. h) Thermoplastic sheet for: Counter Toe Puff 0.010 sq.mtr. 0.006 sq.mtr. i) Reinforcement Tape (Max. width 1.5 cm ) 0.25 mtr. j) Sheets for making insole 0.03 sq. mtr. k) Nails/Tacks 10 gms. l) Thermoplastic Cement (Rod/Granule/polyester/ Polyamide 7 gms. m) Unit sole OR m) 1.) Natural/Synthetic Rubber (PBR/SBR-1502) m) 2.) Precipitated silica m) 3.) Elasto Polymer Net + 1% wastage 660 gms. 114 gms. 16 gms. m) 4). Antioxidants/Accelerator OR 28 gms. m) PVC Moulding Powder Granules (in case of PVC Sole) OR 1.035 kg m) TPR Granules (in case of TPR Sole) 1.035 kg 1 n) Heal (if not attached with unit sole) 1 pair o) Shoe lace Net content + 1% wastage p) Labels/Logos Net content + 1% wastage q) Metallic Shanks (cut to size) Net content + 1% wastage r) Eyelets Net content + 1% wastage s) Zip fastners Net content + 1% wastage t) Elastic Net content + 1% wastage u) Velcro tape Net content + 1% wastage 2 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 3.25 sq.ft If Synthetic lining not asked for 2.92 sq.ft full insole socks synthetic not asked for 1.87 sq.ft Synthetic lining and full insole socks synthetic are asked for 1.54 sq.ft Note: 1. Import of synthetic rubber allowed in item No. 1(m), (1) shall not exceed 50% of the total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export. Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 will not be allowed. NEW ENTRY G3 A Children Leather Boots/ Half Boots (European size 25 through 35, US Size 8.5 through 3) 1 Pair 1 a) Synthetic Lining 1.75 sq.ft. b) Full Insole socks (Synthetic) 0.30 sq.ft. c) Adhesive (PU/Latex/Neoprene) 15 gms. d) Shoe finishes (Polish) 3 gms. e) Shoe finishes (spray) 6 gms. f) Stamping Foil 6 sq. inches g) Sewing Threads 12 mtrs. h) Thermoplastic sheet for: Counter Toe Puff 0.010 sq.mtr. 0.006 sq.mtr. i) Reinforcement Tape (Max. width 1.5 cm ) 0.25 mtr. j) Sheets for making insole 0.03 sq. mtr. k) Nails/Tacks 10 gms. l) Thermoplastic Cement (Rod/Granule/polyester/ Polyamide 7 gms. m) Unit sole OR Net + 1% wastage m) 1.) Natural/Synthetic Rubber (PBR/SBR-1502) m) 2.) Precipitated silica m) 3.) Elasto Polymer m) 4) Antioxidants/accelerator 660 gms. 114 gms. 16 gms. 28 gms. OR PVC Moulding Powder Granules (in case of PVC Sole) OR 1.035 kg TPR Granules (in case of TPR Sole) 1.035 kg 1 n) Heal (if not attached with unit sole) 1 pair o) Shoe lace Net content + 1% wastage p) Labels/Logos Net content + 1% wastage q) Metallic Shanks (cut to size) Net content + 1% wastage r) Eyelets Net content + 1% wastage s) Zip fastners Net content + 1% wastage t) Elastic Net content + 1% wastage u) Velcro tape Net content + 1% wastage 2 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 6.00 sq.ft If Synthetic lining not asked for 5.67 sq.ft full insole socks synthetic not asked for 4.07 sq.ft Synthetic lining and full insole socks synthetic are asked for 3.74 sq.ft Note: 1. Import of synthetic rubber allowed in item No. 1(m), (1) shall not exceed 50% of the total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export. Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. G4 Children Rubber and Canvas footwear with rolled soles 1000 pairs 1 Natural/Synthetic Rubber SBR(1502/1712)PBR/EVA/TPR/ Isoprene 141 kgs 2 Accelerators/ Antioxidents/ Retarders 4.8 kgs. 3 Relevant Colours Pigments 2.82 kgs. 4 Fillers 42.3 kgs. 5 Adhesive (PU/ Polychloroprene/ PVA/ Acrylics/ Isocyanate) 12 kgs. 6 Solvents(MEK) 47.2 Ltr. 7 Misc. Chemicals Silica, Rosin 6.6 kgs. 8 Cotton Textile/Canvas cloth for upper 115 Sq.mtr. 9 Laces Net + 1% wastage 10 Threads 15000 mtrs 11 Elastic Tapes 16 Sq.Mtrs. 12 Components/ Embellishments Net content + 1% wastage 13 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 14 Reinforcement materials Net + 5% wastage, 15 Backer Lining Material Net + 5% wastage 16 Footbed 1000 pairs. Note: 1. In Item 1, import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note:.2. Items 13 (a) to 13 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case of export of the item with lining, in addition to above item, 110 sq.mtr cotton fabrics will be allowed within the overall CIF Value of the licence. Note: 4. Antioxidants shall not be more than 2% of weight of rubber. G5 Children Rubber and Canvas shoe with moulded sole One Pair 1 Cotton Textile/Canvas for Upper 0.110 Sq.mtr 2 Cotton fabric for lining (if used) 0.105 Sq.mtr 3 Insole material with lamination 0.024 Sq.mtr. 4 Adhesive (PU/ Polychloroprene/ PVA/ Acrylics) 12 gms 5 Solvent(MEK) 0.047 Ltr. 6 Laces Net content + 1% wastage 7 Embellishment Net content + 1% wastage 8 Elastic tape 0.016 Sq.Mtrs. 9 Thread 15 Mtr. 10 Sole Moulds 1 Pair per 10000 pairs 11 a) Natural/Synthetic Rubber SBR(1502/1712)/PBR/EVA/TPR /Isoprene 495 gms. b) Accelators/Antioxidants 10 gms c) Relevant colours and pigments 10 gms d) Fillers 170 gms e) Misc.Chemicals(Zinc Oxide, Rosin) 27 gms 12 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 13 Reinforcement materials Net + 5% wastage, 14 Backer Lining Material Net + 5% wastage 15 Footbed 1 pair Note: 1. In item no.11, import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 12 (a) to 12 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export G6 Fine/Fancy Leather Gloves 1 Pair 1 a) Relevant Liners/Lining Material Net content + 1% wastage b) Cloth Labels Net content + 1% wastage c) Hooks Net content + 1% wastage d) UPC paper Stickers Net content + 1% wastage e) Hang Tags Net to Net f) Price Tickets Net to Net g) Threads: 1) For Ladies 16 mtr. 2) For Gents 18 mtrs. h) Packing Materials: Poly, PU bags, Cardboard/corrugated boxes, art paper, duplex board, adhesive tapes, lables, Tags. Silica Gel, Packing Gift box, Inserts (non-corrugated), Sensormatic security tag, Cotton Dust Bag, Stickers As per packing policy. 2 Reelvant Finished Leather 1 For ladies hand gloves 2.20 sq.ft. 2 For Gents hand gloves 2.75 sq.ft. Note: 1. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item 2 above will not be allowed. G7 Finished Leather from Hide of Cow / Buffalo 1000 Sq. Ft. 1 Preservative 2 kgs 2 Wetting Agent 10 kgs 3 Soaking Enzyne 5 kgs 4 Unhairing Agent: a) Sodium Sulphide 5 kgs b) Sulfohydrate 5 kgs c) Enzymatic unhairing agent 5 kgs 5 Leather Liming Auxilliaries 2.5 kgs 6 Deliming Agent 10 kgs 7 Bating Agent (enzyme formulation) 5 kgs 8 Leather Degreasing Agent (Fatty Alcohol/Esters Fatty Acid Derivatives) 5 kgs 9 Bleaching Agents (Sodium Bisulfite/ Hydrogen Peroxide/ Sodium Chlorite/ Potassium Per-Manganate) 2.50 kgs 10 Formic Acid 10 kgs 11 Acetic Acid 5 kgs Chrome Tanning Agent: 5 kgs 12 a) For Full Chrome Tanned Leather (i) Chrome Tanning Agent/ Relevant Reducing Agent/Masking Agent (ii) Vegetable Tanning agent such as Wattle or Mimosa/Quebracho and Supplementary Vegetable Tanning agents such as Gambier/Chestnut/Tara/Sumac/ Re-tanning agent such as Cutch. 50 kg 20 kg b) (i) For Vegetable Tanned Leather Main vegetable tanning agents such as Wattle or Mimosa/ Quebracho, Retanning agents such as Cutch and supplementary Vegetable Tanning agents such Gambier/ Chestnut/Tara/Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a maximum of 30 kg. 150 kg c) For Vegetable - Chrome Combination Tanned Leather (Semi-Chrome tanned Leather) ( i ) Vegetable Tanning Agent such as Wattle or Mimosa/ Quebracho, Re-tanning agents such as Cutch and supplementary Vegetable Tanning agents such Gambier/ Chestnut/Tara/Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a maximum of 30 kg. 150 kg d) Eco tanning agents and supplementary (Glutaraldehyde, Silica tanning agent) 40 kgs (ii) Chrome Tanning Agent/ Relevant Reducing Agent/Masking Agent 22 kg 13 Zirconium Tanning Salt 10 kgs 14 Sodium Formate/Acetate 8 kgs 15 Sodium Bicarbonate 8 kgs 16 Soda Ash 4 kgs 17 Magnesium Oxide 5 kgs 18 Syatan 54 kgs 19 Oxalic Acid 2.50 kgs 20 Sodium Dithionate (Hy-drose) 2.50 kgs 21 Fatliquors 24 kgs 22 Dye Levelling Agent 2 kgs 23 Dyes (Acid dyes/ Direct dyes/ Premetallised dyes/Basic Dyes/ Reactive dyes/ Sulphur dyes) 12 kgs (Out of the total quantity of 12 kgs, the quantity of Reactive dyes shall not exceed 0.6 kg) 24 Dispersing Agent 5 kgs 25 Cationic Dye Fixative 5 kgs 26 Impregnating Resin 20 kgs 27 Penetrating Agent 4 kgs 28 Pigments 10 kgs 29 a) Binders other than those indicated below 10 kgs b) Casein based Binders OR 5 kgs Resin/Polyurathane based binders 10 kgs 30 Liquid Dyes (Based on Acid dyes/ Basic dyes/ Metal complex dyes/Liquid Colouring Agents) 10 ltrs 31 Feel Modifiers 1 kg 32 Lacquer Emulsion 10 kgs 33 Slipagents (Silicon based Oil) 1 kg 34 Fixing Agents/ Cross Linkers (Formaldehyde free) 1 kg 35 Wax Emulsion 2 kgs 36 Oil/Wax for pull up Finish 25 kg 37 Fillers for Leather Industry 3 kg 38 Spl. Auxiliaries for Stain/ Fire/ Grease/ Water/ Alkali/ Acid/ Oil Resistance 5 kgs 39 Pearlised Pigment and Powder 1 kg 40 Fluorescent Pigment 4 kgs 41 Special Lacquer for Brush off/ Two tone 10 kgs 42 *Transfer foil (Polyester/ Polyurethane Metalised film - Silver/ Gold/ Bronze/ Mat/ Plain/ Two Tone effect/ Glazy/ Nubuck effect/ Pull up effect/ Suede effect/Floral and other design effects) 120 sq. Mtrs. Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. 43 Miscellaneous Items: a) Knife Blades/ Band Knives: Splitting Band Knife/Fleshing Knife/Shaving Knife As in note 5 below b) Grinding wheels for Splitting Machine/Fleshing Machine/Shaving Machine c) Felt/ Felt Sleeves for Samming Machine/ Setting cum Samming/ Polishing Felt Roller, Flet/ Felt sleeves for Ironing / Embossing machine d) Stones: Polishing Stone Roller/wet Buffing Stone Roller e) Emery Paper: Roll of 50 Metre Length f) Glazing Glass g) Padding Mohair cloth h) Embossing plate i) Mesh for Vaccum machine j) Roller/Design roller/Re-design roller /Re-furbishing roller for Roller/Coating plating machine 44 1 Relevant Hide/wet Blue/wet white of Cow/Buffalo Net in sq ft + 12% Wasatge OR 2 Relevant Crust Leather of Cow/Buffow Net in sq ft + 8% Wasatge Note: 1. In case of Export of Suede and Nubuck Leather, the quantity of the import item 23 i.e Dyes shall be enhanced to 20 kgs (out of the total quantity of 20 kgs, the quantity of Reactive dyes shall not exceed 0.6kg). Note: 2. Item No. (ii) for 12 (a) shall not be allowed for the grain garment leather and gloving leather. Note: 3. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/ Tara/ Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale. a) Lactic Acid which is appearing as Deliming Agent against inputs shall not be allowed. b) Synthetic Resins and Hydroxy Ethyl Cellulose in any broad heading of Chemicals may not be allowed. c) Any product in the name of fillers may not be allowed because formulated products manufactured by Leather Chemical Companies (as supported by their technical data sheets) are used in Leather Industry. Note: 4. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, chemicals at sl# 1 to sl# 9 shall not be allowed Note: 5. Items 43 (a) to 43 (j) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export G8 Gents Leather Half Boot Uppers 1 Pair 1 a) Synthetic Lining 3.75 Sq. ft. b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (Synthetic/ latex ) 12.00 gms d) Shoe Finishes (Polish) 7 gms e) Shoe finishes (Spray) 15 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 50 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 1.10 mtr j) Eyelets Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fastners Net content + 1% wastage m) Labels/ Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 4 Reinforcement materials Net + 5% wastage, 5 Backer Lining Material Net + 5% wastage 6 Footbed 1 pair 7 Foam Net to Net 8 Steel/ Carbon Toe Cap 1 pair 9 Decoration items Reflectors 0.052 sq.mtr 10 Webbing Tape 1.7 mtr 12 Wool Lining 0.3 sq mtr. 13 Welt Net to Net 14 Shoe Laces Net to Net 15 Hang Tag Net to Net 16 Conduction Thread 18 Mtr. 17 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.80 sq.ft If Synthetic lining not asked for 8.25 sq.ft full insole socks synthetic not asked for 4.95 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.40 sq.ft Note: 1. In case finished leather is manufactured from wet blue /wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 17 above will not be allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3 If footwearis waterproof, then the following materials will be allowed Waterproof lining 0.17 sq. mtr. Waterproof tape 2.5 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G9 Gents Leather Half Boots 1 Pair 1 a) Synthetic lining 3.75 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (PU/ Neoprene/ latex) 40.00 gms d) Shoe Finishes (Polish) 07.00 gms e) Shoe finishes (Spray) 15.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 50 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 01.1 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 11 gms m) Unit sole with or without heel OR Net + 1% wastage 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipated silica 114 gms (iii) Elasto polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net +1 % wastage o) Shoe-Lace Net +1 % wastage p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net +5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net To Net 7 Steel/ Carbon Toe Cap Net To Net 8 Decoration items Reflectors 0.052 sq.mtr 9 Webbing Tape 1.7 mtr 10 Wool Lining 0.3 sq.mtr 11 Welt Net to Net 12 Midsole Net to Net 13 Sole Welt 1.4 mtr 14 Unit Box 1 set 15 Tissue Paper 2 nos 16 Hang Tag Net To Net 17 Conduction Thread 18 mtr 18 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.80 sq.ft If Synthetic lining not asked for 8.25 sq.ft full insole socks synthetic not asked for 4.95 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.40 sq.ft Note: 1. Antioxidants shall be restricted upto 2% of weight of Natural/ Synthetic Rubber. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue /wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 18 above will not be allowed. N ote: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.17 sqm.tr Waterproof tape 2.5 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G10 Gents Leather Long Boots/ Gents Leather Long Boot Lasted Uppers 1 Pair 1 a) Synthetic lining 4.5 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 50.00 gms d) Shoe Finishes (Polish) 09.00 gms e) Shoe finishes (Spray) 20.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 70 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 01.5 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 11 gms m) Unit sole with or without heel OR Net +1 % wastage 1 (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms 1 (i) Natural/synthetic rubber SBR(1502/1712)/PBR 660 gms (ii) Precipitated silica 114 gms (iii) Elasto polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net +1 % wastage o) Shoe-Lace Net +1 % wastage p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 7 Decoration items Reflectors 0.052 sq.mtr 8 Webbing Tape 1.7 mtr 9 Wool Lining 0.6 sq.mtr 10 Welt Net to Net 11 Midsole Net to Net 12 Sole Welt 1.4 mtr 13 Unit Box 1 set 14 Tissue Paper 2 nos 15 Hang Tag 1 no 16 Conduction Thread 18 mtr 17 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 11.00 sq.ft If Synthetic lining not asked for 10.45 sq.ft. full insole socks synthetic not asked for 6.05 sq.ft Synthetic lining and full insole socks synthetic are asked for 5.50 sq.ft. Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber allowed. Import of various items covered by Sl. No. 1(m) shall not be permitted in the case of export product Gents Leather Long Boot Lasted Uppers. . Import of synthetic rubber shall not exceed 50% of total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 17 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.17 sqm.tr Waterproof tape 2.5 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G11 Gents Leather Sandal Upper 1 Pair 1 ACCESSORIES : a) Synthetic Lining 1.2 sq.ft. b) Adhesive/Synthetic/Latex 24 gms. c) Shoe finishes (Polish) 3.6 gms. d) Shoe finishes (Spray) 8.4 gms. e) Stamping Foil 2.46 sq.inches f) Re-inforcement Tape (Max.width 1.5 cm.) 0.48 mtr. g) Eyelets, Laces and Elastics Net content + 1% wastage h) Buckle Metal Fitting Net to Net 2 Miscellaneous items: a) Clicking board As in note 2 Below b) Binding Guage c) Industrial Sewing machine needles/hammer d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheel g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 7 Welt Net to Net 8 Shoe Laces Net to Net 9 Labels/ Logo Net +1% Wastage 10 Hang Tag Net to Net 11 Relevant Finished Leather 1.65 Sq. Ft. Note: 1. Requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 11 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof Label/ Logo Net + 1% wastage (instead of item 10 i.e. Labels/Logos) G12 Gents Leather sandals with P.U. Sole/Rubber Sole /PVC Sole/Unit Sole 1 Pair 1 a) Synthetic thread 10 mts b) Footwear dressing 15 gms c) Adhesives (PU/ Neoprene/ Cement/ PVA) 30 gms d) Insole board 0.52 sq.ft e) Polyuerethene foam sheet 10 gms f) Buckles Net+1 % wastage g) Tacks 2 gms h) Unit sole OR Net +1 % wastage 1 h) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms 1 h) (i) Natural rubber/ Synthetic rubber / PBR/ SBR (1502/1712) 660 gms (ii) Precipitated silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxident/ Accelerators OR 28 gms i) PVC Resin 0.5329 Kg ii) Plasticiser (DOP) 0.3997 Kg iii) Stabilizer (Ba-Cd-Zn) 0.0159 Kg iv) Antimony Trioxide 0.014 Kg v) Pigments 0.008 Kg vi) Solvents (MEK/Xylene) 0.0015 Kg 2 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net +5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 7 Welt Net to Net 8 Midsole Net to Net 9 Sole Welt 1.4 mtr 10 Unit Box Net to Net 11 Tissue Paper 2 nos 12 Hang Tag Net to Net 13 Labels/ Logo Net +1% Wastage 14 Relevant Finished Leather 1.65 Sq. Ft. Note: 1. Antioxidant shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic Rubber shall not exceed 50% of the Total Rubber allowed. 3. For requirement of processing Chemicals as per Note 7 under the 'GeneralNotes for Leather Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 14 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof Label/ Logo Net + 1% wastage (instead of item 15 i.e. Labels/Logos) G13 Gents Leather Shoe Uppers(Stitched/unstitche d) 1 Pair 1 a) Synthetic lining/Artificial furlining. 1.75 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (Synthetic/ latex ) 10.00 gms d) Shoe Finishes (Polish) 5.00 gms e) Shoe finishes (Spray) 10.00 gms f) Stamping foil 06.00 sq. inch g) Sewing thread 25 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (max width 1.5 cms) 0.50 mtr j) Eyelet Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fasteners Net content + 1% wastage m) Labels / Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in Note 1 Below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ Skiving Knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Shoe-Lace Net toNet 7 Foam Net toNet 8 Steel/ Carbon Toe Cap Net toNet 9 Decoration items Reflectors 0.052 sq.mtr 10 Webbing Tape 1.5 mtr 11 Wool Lining 0.285 sq mtr. 12 Welt 1 pair 13 Hang Tag Net toNet 14 Conduction Thread 15 Mtr. 15 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 4.68 sq.ft. If Synthetic lining not asked for 4.13 sq.ft. full insole socks synthetic not asked for 2.75 sq.ft Synthetic lining and full insole socks synthetic are asked for 2.20 sq.ft. Note: 1. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 2. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 15 above will not be allowed. Note: 3. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.12 sqm.tr Waterproof tape 2.0 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G14 Gents Leather Shoes 1 Pair 1 a) Synthetic lining 1.75 sq ft b) Full insole socks (Synthetic) OR 0.5 sq ft Full insole socks partly made of leather and partly of synthetic with or without shank Net + 1% wastage 1 c) Adhesives (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 05.00 gms e) Shoe finishes (Spray) 10.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 25 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs OR 0.009 sq mtr h) i) Counter/Stiffner made of leather/leather board. Net + 1% wastage ii) Toe Puff/caps made out of Thermo Plastic Sheets or Foam. Net +1 % wastage 1 i) Re-inforcement tape (width 1.5 cms) 0.50 mtrs j) Sheet for making insole 0.050 sq mtr k) Nails/ tacks 15 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.011 kg m) Unit sole with or without heel OR 1 Pair 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/ Synthetic Rubber SBR(1502/1712) 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators OR 28 gms m) PVC Moulding Powder/ Granules in case of PVC Sole OR 1.035 Kg m) TPR Granules (in case of TPR Sole) OR 1.035 Kg m) Styrene Butadine Styrene Oil bound Co-polymer 0.803 kg 1 n) Heel (if not attached with unit sole) 1 Pair o) Shoe-Lace 1 Pair p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As per note 2 Below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to net 7 Steel/ Carbon Toe Cap Net to net 8 Decoration items Reflectors 0.052 sq.mtr 9 Webbing Tape 1.5 mtr 10 Design Components 1 Set 11 Wool Lining 0.285 sq.mtr 12 Welt Net to net 13 Midsole Net to net 14 Sole Welt 1.4 mtr 15 Unit Box 1 set 16 Tissue Paper 2 nos 17 Hang Tag Net to net 18 Conduction Thread 15 mtr 19 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 4.68 sq.ft If Synthetic lining not asked for 4.13 sq.ft full insole socks synthetic not asked for 2.75 sq.ft Synthetic lining and full insole socks synthetic are asked for 2.20 sq.ft. Note: 1. Antioxidant shall be restricted to 2% of weight of Natural/ Synthetic Rubber. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. Import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 4 High Speed Diesel (HSD) is also allowed for import @ 1.15 litre per pair of Gents Leather Shoes [Full shoes without leather lining] and @ 1.295 litre per pair of Gents Leather Shoes [Full shoes with leather lining] subject to actual user condition. These norms for fuel are applicable only to those units having facilities for captive power generation using HSD as fuel. Note: 5. In case finished leather is manufactured from wet blue/wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 19 above will not be allowed. Note: 6. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.12 sqm.tr Waterproof tape 2.0 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G15 Gents Long Boot Uppers (upto Knee) 1 Pair 1 a) Synthetic lining/Artificial furlining 4.5 sq ft b) Full insole socks (Synthetic) 0.5 sq ft c) Adhesive (Synthetic/ latex ) 15.00 gms d) Shoe Finishes (Polish) 09.00 gms e) Shoe finishes (Spray) 20.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 70 mtrs h) Thermoplastic sheets for :- 1. Counter 0.014 sq. mtr. 2. Toe Caps/ puffs 0.009 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 1.50 mtr j) Eyelets Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fastners Net content + 1% wastage m) Labels /Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note 2 Below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ Skiving Knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Shoe-Lace Net to Net 7 Steel/ Carbon Toe Cap Net to Net 8 Decoration items Reflectors 0.052 sq.mtr 9 Webbing Tape 1.7 mtr 10 Wool Lining 0.6 sq mtr. 11 Welt Net to Net 12 Hang Tag Net to Net 13 Conduction Thread 18 Mtr. 14 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 11.00 sq.ft If Synthetic lining not asked for 10.45 sq.ft full insole socks synthetic not asked for 6.05 sq.ft Synthetic lining and full insole socks synthetic are asked for 5.50 sq.ft Note: 1. For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 14 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.17 sqm.tr Waterproof tape 2.5 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.049 sq.mtr Stroble Layer 2 0.065 sqm.tr G16 Gents Rubber and Canvas footwear with rolled soles 1000 pairs 1 Natural/Synthetic Rubber SBR(1502/1712)/EVA/TPR/Isop rene 227 kgs. 2 Accelerators/Antioxidents/ Retarders 7.78 kgs. 3 Relevant Colours Pigments 4.54 kgs 4 Fillers 68.14 kgs 5 Adhesive (PU/Polychloroprene/ PVA/Acrylics/Isocyanate) 18 kgs. 6 Solvents(MEK) 76.0 Ltrs 7 Misc.Chemicals Silica, Rosin 10.5 kgs. 8 Cotton Textile/Canvas cloth for upper 194 Sq. mtr. 9 Laces Net content + 1% wastage 10 Threads 20000 mtrs 11 Elastic Tapes 18 Sq. Mtr. 12 Components/ Embellishments Net content + 1% wastage 13 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 14 Reinforcement materials Net + 5% wastage, 15 Backer Lining Material Net + 5% wastage 16 Footbed 1000 pairs. Note:1. In Item 1, import of synthetic rubber shall not exceed 50% of the total rubber allowed. 2. Items 13 (a) to 13 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case of export of the item with lining, in addition to above item, 170 sq.mtr. cotton fabrics will be allowedwithin the overall CIF Value of the licence. Note: 4. Antioxidants shall not be more than 2% of weight of rubber. G17 Gents Rubber and Canvas shoes with moulded sole One Pair 1 Cotton Textile/Canvas for Upper 0.185 Sq.mtrs 2 Cotton fabric for linning (if used) 0.180 Sq.mtr 3 Insole material with lamination 0.048 Sq.mtr 4 Adhesive (PU/Polychloroprene/ PVA/ Acrylics) 18 gms 5 Solvent (MEK) 0.076 Ltr. 6 Laces Net +1 % wastage 7 Embellishment Net +1 % wastage 8 Elastic tape 0.018 Sq.Mtr. 9 Thread 20 Mtr. 10 Sole Moulds 1 Pair per 10000 pairs 11 a) Natural/synthetic Rubber SBR(1502/1712)/PBR/EVA/TPR /Isoprene 495 gms. b) Accelators/Antioxidants 10 gms c) Relevant colours and pigments 10 gms d) Fillers 170 gms e) Misc.Chemicals(Zinc Oxide, Rosin) 27 gms 12 a) Clicking Board b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine As in note 2 below f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 13 Reinforcement materials Net + 5% wastage, 14 Backer Lining Material Net + 5% wastage 15 Footbed 1 pair Note: 1. In item no.11, import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 12 (a) to 12 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. Antioxidants shall be restricted to 2% of weight of Natural/ synthetic rubber. Note: 4. In case of export of the item with lining, in addition to above item, 0.170 sq.mtr cotton fabrics will be allowed within the overall CIF Value of the licence. G22 Ladies Closed Leather shoe uppers 1 Pair 1 a) Synthetic lining 1.5 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (Synthetic/ latex ) 08.00 gms d) Shoe Finishes (Polish) 04.00 gms e) Shoe finishes (Spray) 8.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 20 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.40 mtrs j) Eyelets Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fastners Net content + 1% wastage m) Labels / Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in Note 1 b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ Skiving Knives e) Band knives for splitting M/c. f) Grinding wheels Below g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to Net 7 Steel/ Carbon Toe Cap Net to Net 8 Decoration items Reflectors 0.044 sq.mtr 9 Webbing Tape 1.2 mtr 10 Wool Lining 0.242 sq mtr. 11 Welt Net to Net 12 Shoe Lace Net to Net 13 Hang Tag Net to Net 14 Conduction Thread 12 Mtr. 15 Relevant Finished Leather a If Synthetic lining and full insole socks synthetic are not asked for 4.02 sq.ft b If Synthetic lining not asked for 3.58 sq.ft c full insole socks synthetic not asked for 2.37 sq.ft d Synthetic lining and full insole socks synthetic are asked for 1.93 sq.ft Note: 1. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 2. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 15 above will not be allowed. Note: 3. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.098 sqm.tr Waterproof tape 1.80 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G23 Ladies Leather Half Boot 1 Pair 1 a) Synthetic lining 3.25 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 30.00 gms d) Shoe Finishes (Polish) 6.00 gms e) Shoe finishes (Spray) 12.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 40 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.90 mtrs j) Sheet for making insole 0.040 sq mtr k) Nails/ tacks 12 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.008 kg m) Unit sole with or without heel OR 1 Pair 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Calalyst 53 gms (iv) Pigment Paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) Net + 1% wastage o) Shoe-Lace Net + 1% wastage p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) Net +1 % wastage r) Eyelets Net + 1% wastage s) Metallic fittings Net + 1% wastage t) Zip fastners Net + 1% wastage u) Elastic Net + 1% wastage v) Velcro-tape Net + 1% wastage 2 a) Clicking board As per note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to Net 7 Steel/ Carbon Toe Cap Net to Net 8 Decoration items Reflectors 0.044 sq.mtr 9 Webbing Tape 1.36 mtr 10 Design Components 1 Set 11 Wool Lining 0.255 sq.mtr 12 Welt Net to Net 13 Midsole Net to Net 14 Sole Welt 1.2 mtr 15 Unit Box 1 set 16 Tissue Paper 2 nos 17 Hang Tag Net to Net 18 Conduction Thread 12 mtr 19 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.14 sq.ft. If Synthetic lining not asked for 7.70 sq.ft. full insole socks synthetic not asked for 4.57 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.13 sq.ft. Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 19 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.14 sqm.tr Waterproof tape 2.15 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G24 Ladies Leather Half Boot Uppers 1 Pair 1 a) Synthetic lining/Artificial fur lining 3.25 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (Synthetic/ latex ) 10.00 gms d) Shoe Finishes (Polish) 06.00 gms e) Shoe finishes (Spray) 12.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 40 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.90 mtrs j) Eyelets Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fastners Net content + 1% wastage m) Labels/ Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As per note 1 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ Skiving Knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Foam Net to Net 7 Steel/ Carbon Toe Cap Net to Net 8 Decoration items Reflectors 0.044 sq.mtr 9 Webbing Tape 1.36 mtr 10 Wool Lining 0.255 sq mtr. 11 Welt Net to Net 12 Shoe Lace Net to Net 13 Hang Tag Net to Net 14 Conduction Thread 12 Mtr. 15 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 8.14 sq. ft. If Synthetic lining not asked for 7.70 sq.ft. full insole socks synthetic not asked for 4.57 sq.ft Synthetic lining and full insole socks synthetic are asked for 4.13 sq.ft Note: 1. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 2. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 15 above will not be allowed. Note: 3. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.14 sqm.tr Waterproof tape 2.15 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G25 Ladies Leather Long Boot 1 Pair 1 a) Synthetic lining/Natural Fur Lining 4.25 sq ft b) Full insole socks (Synthetic/Natural Fur Lining) 0.4 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 40.00 gms d) Shoe Finishes (Polish) 8.00 gms e) Shoe finishes (Spray) 15.00 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 60 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 1.30 mtrs j) Sheet for making insole 0.040 sq mtr k) Nails/ tacks 12 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.008 kg m) Unit sole with or without heel OR 1 Pair 1 m) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment Paste 31 gms (v) Release Agent 45 gms OR m) (i) Natural/ Synthetic Rubber PBR/SBR(1502/1712) 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators 28 gms 1 n) Heels (if not attached with unit sole) 1 Pair o) Shoe-Lace 1 Pair p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note 2 below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 7 Decoration items Reflectors 0.044 sq.mtr 8 Webbing Tape 1.36 mtr 9 Wool Lining 0.5 sq.mtr 10 Welt Net to Net 11 Midsole Net to Net 12 Sole Welt 1.2 mtr 13 Unit Box 1 set 14 Tissue Paper 2 nos 15 Hang Tag Net to Net 16 Conduction Thread 12 Mtr 17 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are 10.34 sq.ft not asked for If Synthetic lining not asked for 9.90 sq.ft full insole socks synthetic not asked for 5.67 sq.ft Synthetic lining and full insole socks synthetic are asked for 5.23 sq.ft. Note: 1. Antioxidants shall be reestricted to 2% of weight of Natural/ Synthetic Rubber.2. Natural Fur Lining will be allowed only if it is reflected in the export product. 3. Import of Synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 17 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.14 sqm.tr Waterproof tape 2.15 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G26 Ladies Leather sandals with PU Sole/Rubber Sole/ PVC sole 1 Pair 1 a) Synthetic thread 10 mts b) Footwear dressing 15 gms c) Adhesives (PU/ Neoprene/ Cement/ PVA) 30 gms d) Insole board 0.52 sq.ft e) Polyuerethene foam sheet 10 gms f) Buckles Net + 1% wastage g) Tacks 2 gms h) Unit sole OR Net +1 % wastage 1 h) (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment Agent 31 gms (v) Release Agent OR 45 gms 1 h) (i) Natural rubber Synthetic rubber PBR/ SBR (1502/1712) 660 gms (ii) Precipitated silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxident/ Accelerators OR 28 gms (i) PVC Resin 0.5329 Kg (ii) Plasticiser (DOP) 0.3997 Kg (iii) Stabilizer (Ba-Cd-Zn) 0.0159 Kg (iv) Antimony Trioxide 0.014 Kg (v) Pigments 0.008 Kg (vi) Solvents (MEK/Xylene) 0.0015 Kg 2 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 8 Welt Net to Net 9 Midsole Net to Net 10 Sole Welt 1.2 mtr 11 Unit Box 1 set 12 Tissue Paper 2 nos 13 Hang Tag Net to Net 14 Labels/ Logos Net +1% Wastage 15 Relevant Finished Leather 1.38 Sq. Ft. Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic rubber shall not exceed 50% of the total rubberallowed. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 15 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof Label/ Logo Net + 1% wastage ( instead of item no. 14 above) G27 Ladies Leather Sandals Upper. Pair (Based on 1.38 sq.ft. of finished Upper Leather) 1 Accessories: a) Synthetic Lining 1.00 sq.ft. b) Full Insole Socks (Synthetic) 0.4 sq.ft. c) Adhesive (Synthetic/Latex) 20 gms. d) Shoe finishes (Polish) 3 gms. e) Shoe finishes (Spray) 7 gms. f) Synthetic Thread 8 mtrs. g) Thermoplastic Sheets for counter 0.013 sq.mtr. h) Re-inforcement tape (width 1.5 cms) 0.40 mtr. i) Eyelets Net content + 1% wastage j) Metallic Fitting Net content + 1% wastage k) Labels / Logos Net content + 1% wastage l) Elastic Net content + 1% wastage m) Velcro tape Net content + 1% wastage 2 a) Clicking Board As in Note 1 Below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair 6 Steel/ Carbon Toe Cap Net to Net 8 Shoe Lace Net to Net 9 Welt Net to Net 10 Hang Tag Net to Net 11 Relevant Finished Leather 1.38 Sq. Ft. Note1. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 2. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 11 above will not be allowed. Note: 3. If footwear is waterproof, then the following materials will be allowed Waterproof Label/ Logo Net + 1% wastage ( if item 1 (k) is not asked for G28 Ladies Leather Shoes 1 Pair 1 a) Synthetic lining 1.50 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (PU/ Neoprene/ Latex ) 20.00 gms d) Shoe Finishes (Polish) 4.00 gms e) Shoe finishes (Spray) 8.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 20 mtrs h) Thermoplastic sheets for :- 1. Counters 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 0.40 mtrs j) Sheet for making insole 0.040 sq mtr k) Nails/ tacks 12 gms l) Thermoplastic cement (rod/ granule/ polyester/ polyamide) 0.008 kg m) Unit sole with or without heel OR Net +1 % wastage (i) Polyol 515 gms (ii) Isocynate 451 gms (iii) Catalyst 53 gms (iv) Pigment Paste 31 gms (v) Release Agent OR 45 gms m) (i) Natural/ Synthetic Rubber SBR(1502/1712)/PBR 660 gms (ii) Precipitated Silica 114 gms (iii) Elasto Polymer 16 gms (iv) Antioxidants/ Accelators OR 28 gms m) PVC Moulding Powder/Granules (in case of PVC Sole) OR 1.035 Kg m) TPR Granules (in case of TPR Sole) 1.035 Kg 1 n) Heel (if not attached with unit sole) Net +1 % wastage o) Shoe-Lace Net to Net p) Labels/ logos Net content + 1% wastage q) Metallic Shanks (cut to size) 1 Pair r) Eyelets Net content + 1% wastage s) Metallic fittings Net content + 1% wastage t) Zip fastners Net content + 1% wastage u) Elastic Net content + 1% wastage v) Velcro-tape Net content + 1% wastage 2 a) Clicking boards b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ skiving knives e) Band knives for splitting M/c. f) Grinding wheels As in note 2 below g) Feed Rollers h) Silver marking pencils/ pens/ refills i) Abrasive paper/ emery paper/ belts/ cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair Foam Net to Net Steel/ Carbon Toe Cap Net to Net Decoration items Reflectors 0.044 sq.mtr Webbing Tape 1.2 mtr Wool Lining 0.242 sq.mtr Welt Net to Net Midsole Net to Net Sole Welt 1.2 mtr Unit Box 1 set Tissue Paper 2 nos Hang Tag Net to Net Conduction Thread 12 mtr 6 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 4.02 sq.ft. If Synthetic lining not asked for 3.58 sq.ft full insole socks synthetic not asked for 2.37 sq.ft Synthetic lining and full insole socks synthetic are asked for 1.93 sq.ft. Note: 1. Antioxidants shall be restricted to 2% of weight of Natural/ Synthetic Rubber. 2. Import of Synthetic rubber shall not exceed 50% of the total rubber allowed. Note 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export. Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.098 sqm.tr Waterproof tape 1.85 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (p) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G29 Ladies Long Boot Uppers (Upto knee) 1 Pair 1 a) Synthetic lining 4.25 sq ft b) Full insole socks (Synthetic) 0.4 sq ft c) Adhesive (Synthetic/ latex ) 12.00 gms d) Shoe Finishes (Polish) 08.00 gms e) Shoe finishes (Spray) 15.0 gms f) Stamping foil 06.00 sq.inch g) Sewing thread 60 mtrs h) Thermoplastic sheets for :- 1. Counter 0.013 sq. mtr. 2. Toe Caps/ puffs 0.008 sq mtr 1 i) Re-inforcement tape (width 1.5 cms) 1.3 mtrs j) Eyelets Net content + 1% wastage k) Metallic fittings Net content + 1% wastage l) Zip fastners Net content + 1% wastage m) Labels/ Logos Net content + 1% wastage n) Elastic Net content + 1% wastage o) Velcro-tape Net content + 1% wastage 2 a) Clicking boards As in note below b) Binding Guage c) Industrial sewing machine needles/ hammer needle d) Bell/ Skiving Knives e) Band knives for splitting M/c. f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 3 Reinforcement materials Net + 5% wastage, 4 Backer Lining Material Net + 5% wastage 5 Footbed 1 pair Steel/ Carbon Toe Cap Net to Net Decoration items reflectors 0.044 sq.mtr. Webbing Tape 1.36 mtr Wool Lining 0.5 sq.mtr. Welt Net to Net Shoe Lace Net to Net Hang Tag Net to Net Conduction Thread 12 mtr. 6 Relevant Finished Leather If Synthetic lining and full insole socks synthetic are not asked for 10.34 sq.ft If Synthetic lining not asked for 9.90 sq.ft full insole socks synthetic not asked for 5.67 sq.ft Synthetic lining and full insole socks synthetic are asked for 5.23 sq.ft Note: For requirement of processing Chemicals as per Note 7 under the 'General Notes for Leather Note: Items 2 (a) to 2 (0) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. Note: 4. If footwear is waterproof, then the following materials will be allowed Waterproof lining 0.14 sqm.tr Waterproof tape 2.15 mtr Waterproof Label/ Logo Net + 1% wastage (instead of item 1 (m) i.e. Labels/Logos) Stroble Layer 1 0.044 sq.mtr Stroble Layer 2 0.059 sqm.tr G30 Ladies Rubber and Canvas footwear with rolled soles 1000 pairs 1 Natural/Synthetic Rubber SBR(1502/1712)/EVA/TPR/Isop rene 197 kgs. 2 Accelerators/ Antioxidents/ Retarders 6.7 kgs. 3 Relevant Colours Pigments 3.95 kgs. 4 Fillers 59 kgs. 5 Adhesive (PU/ Polychloroprene/ PVA/ Acrylics/ Isocyanate) 16 kgs. 6 Solvents(MEK) 66 Ltr. 7 Misc.Chemicals Silica, Rosin 9 kgs. 8 Cotton Textile/Canvas cloth for upper 170 Sq.mtr. 9 Laces Net content + 1% wastage 10 Threads 18000 mtrs 11 Elastic Tapes 18 Sq.Mtrs. 12 Components/Embellishments Net content + 1% wastage 13 a) Clicking Board b) Binding Guage c) Industrial Sewing machine needles/hammer needle As in note 2 below d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 14 Reinforcement materials Net + 5% wastage, 15 Backer Lining Material Net + 5% wastage 16 Footbed 1000 pairs. Note: 1. In Item 1, import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2. Items 13 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export In case of export of the item with lining, in addition to above item, 146 sq.mtr. cotton fabrics will be allowed within the overall CIF Value of the licence. Antioxidants shall not be more than 2% of weight of rubber. G31 Ladies Rubber and Canvas shoes with moulded sole One Pair 1 Cotton Textile/Canvas for Upper 0.165 Sq.mtr 2 Cotton fabric for linning (if used) 0.160 Sq.Mtr 3 Insole material with lamination 0.038 Sq.mtr 4 Adhesive (PU/ Polychloroprene/ PVA/ Acrylics) 16 gms. 5 Solvent(MEK) 0.066 Ltr. 6 Laces Net content + 1% wastage 7 Embellishment Net content + 1% wastage 8 Elastic tape 0.018 Sq. Mtr 9 Thread 18 Mtrs 10 Sole Moulds 1 Pair per 10000 pairs 11 a) Natural/Synthetic Rubber (SBR (1502/1712)/PBR/EVA/TPR/Iso prene 495 gms. b) Accelators/Antioxidants 10 gms c) Relevant colours and pigments 10 gms d) Fillers 170 gms e) Misc.Chemicals (Zinc Oxide, Rosin) 27 gms 12 a) Clicking Board As in note 2 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving knives e) Band knives for splitting Machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills. i) Abrasive paper/emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic Shoe last m) Cutters and trimmers (all types) for footware making 13 Reinforcement materials Net + 5% wastage, 14 Backer Lining Material Net + 5% wastage 15 Footbed 1 pair Note: 1. In item no. 11, import of synthetic rubber shall not exceed 50% of the total rubber allowed. Note: 2: Items 12 (a) to 12 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case of export of the item with lining, in addition to above item, 0.146 sq.mtr. of cotton fabrics will be allowed within the overall CIF value of the licence. Note: 4.Antioxidants shall be restricted to 2% of weight of Natural/ synthetic rubber G40 Leather welt work shoes 1 Pair 1 a) Synthetic lining PVC/PU 0.12 Sq. mtrs. b) Adhesives: i) PU based 0.05 ltr. ii) Neoprene based 0.025 ltr. 1 c) Shoe Finishes (Polish) 5 gms d) Shoe Finishes (Spray) 10 gms. e) Stamping Foil 6 Sq. inch f) Sewing thread 70 mtrs. g) Thermo plastic sheets: For Toe Caps/puffs OR 0.009 Sq. mtrs. For steel Toe Caps Net to net 1 h) Moulded Counter (Leather board) Net +1 % wastage i) Reinforcement (Plyrib tape) width 25 mm 1.46 mtr. j) Sheet for making Insole 0.05 Sq. mtrs. k) Nails/tacks OR 15 gms. Shoe staples 12 Nos 1 l) Thermo plastic cement (rod/granule/polyester/polymide) 11 Gms. m) Unit sole with or without heel Net +1 % wastage n) Mid sole Net to Net o) Shoe lace Net to Net p) Labels/Logos Net +1 % wastage q) Eyelets Net +1 % wastage r) Metallic fittings Lacing hooks/Drings Net +1 % wastage s) Plastic/leather/rubber welt in any colour 1.62 Sq. Mtr. (width upto 5 cm) 2 a) Clicking boards As per note 2 below b) Binding guage c) Industrial sewing machines needles/hammer needle d) Bell/Skiving Knives e) Band Knives for splitting machine f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills i) Abrasive paper/Emery paper/belts/cup shapes j) Brushes of all types k) Sea Sponge l) Plastic shoe last m) Cutters and trimmers (all types) for footwear making 3. Reinforcement materials Net +5% wastage, 4. Backer Lining Material Net +5% wastage 5. Footbed 1 pair 6. Relevant Finished Leather 2.75 Sq. Ft Note:1. Against item No.1(g), import of Steel Toe Caps and Counters made out of Steel Leather Board as per the buyer's requirements can be allowed on net to net basis. Note: 2. Items 2 (a) to 2 (m) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 3. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. G43 Gents Boys Leather Chappals, Slippers with Leather Sole or Synthetic Sole 1 Pair 1 PVC Leather Cloth or Velvets 2 Sq.ft. 2 Full Insole Socks (Synthetic) 0.5 Sq.ft. 3 Artificial Leather or P.U. Leather Cloth 1.80 Sq.ft. 4 Stamping Foils 4 Sq.Inches 5 Adhesive (P.U.) 30 gms. 6 Relevant Finished Leather 1.65 Sq. ft. Note1: Item 2 shall be allowed only if it is used for manufacture of the export product. Note: 2. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. G44 Ladies Girls Leather Chappals, Slippers Sandals with Leather Sole and Synthetic Sole 1 Pair 1 PVC Leather Cloth or Velvets 2 Sq.ft. 2 Full Insole Socks (Synthetic) 0.4 Sq.ft. 3 Artificial Leather or P.U. Leather Cloth 1.20 Sq.ft. 4 Stamping Foils 4 Sq.Inches 5 Adhesive (P.U.) 30 gms. 6 Relevant Finished Leather 1.38 Sq. ft. Note1.: Item 2 shall be allowed only if it is used for manufacture of the export product. Note: 2. In case finished leather is manufactured from wet blue/ wet white Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 6 above will not be allowed. G45 Gents Leather Half Boot Lasted Upper with insole 1 Pair 1 a) Synthetic Lining 3.75 Sq.ft. b) Adhesive(Latex) 12 gms c) Stamping Foil 6 Sq.Inches d) Sewing threads 50 mtrs. e) Thermoplastic Sheet for: i)Counter 0.014 Sq.mtr. ii)Toe Caps/Puffs 0.009 Sq.mtr. 1 f) Re-inforcement Tape (Max. width 1.5 cm.) 1.10 Mtr. g) Sheets for making insole 0.050 Sq.mtr. h) Nails/Tacks 15 gm. i) Shoe Lace 1 Pair j) Labels/Logos Net content + 1% wastage. k) Eyelets Net content + 1% wastage. l) Metallic Fitting Net content + 1% wastage. m) Zip Fastners Net content + 1% wastage. n) Elastic Net content + 1% wastage. o) Velcro tape Net content + 1% wastage. 2 a) Clicking Boards As per note 1 below b) Binding Guage c) Industrial Sewing machine needles/hammer needle d) Bell/Skiving Knives e) Band knives for Splitting M/C f) Grinding wheels g) Feed Rollers h) Silver marking pencils/pens/refills i) Abrasive paper/emery paper/belts/cup shapes j) Sea Sponge k) Plastic Shoe Last 3 Thermoplastic Cement (Rod/Granules/Polyester/ Polyamide) 11 Gms./Pair 4. Reinforcement materials Net + 5% wastage, 5. Backer Lining Material Net + 5% wastage 6. Footbed 1 pair 7. Relevant Finished Leather If Synthetic lining are not asked for 7.70 sq.ft If Synthetic lining asked for 4.40 sq.ft Note: 1: Items 2 (a) to 2 (k) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export Note: 2. In case finished leather is manufactured from wet blue Leather/ Crust Leather, processing chemicals required for manufacturing of finished leather shall be allowed as per Note 7 under the 'General Notes for Leather and Leather Products' and input item no 7 above will not be allowed. G46 Finished Leather from Skin of Goat/ Sheep/ Calf 1000 Sq.ft. 1 Preservative 1.5 kg 2 Wetting Agent 5 kgs 3 Soaking Enzyme 2.5 kgs 4 Unhairing Agent: a) Sodium Sulphide 2. kgs b) Sulfohydrate 2.5 kgs c) Enzymatic unhairing agent 2 kgs 5 Leather Linning Auxilliaries 1.5 kg 6 Deliming Agent (Ammonium sulphate/ Ammonium chloride) 2.5 kgs 7 Bating Agent (Enzyme formulation) 5 kgs 8 Leather Degreasing Agent (Fatty Alcohol/ Esters/ Fatty Acid Derivatives) 5 kgs 9 Bleaching Agent (Sodium Bisulfite/ Hydrogen Peroxide/ Sodium Chlorite/ Potassium Permanganate) 1.5 kg 10 Formic Acid 10 kgs 11 Acetic Acid 2.5 kgs Chrome Tanning Agent: 2.5 kgs 12 a) For Full Chrome Tanned Leather ( i ) Chrome Tanning Agent/Relevant Reducing Agent/Masking Agent (ii) Vegetable Tanning Agent such As Wattle or Mimosa/Quebracho and supplementary Vegetable tanning agents such as Gambier/Chestnut/ Tara/ Sumac/Re-tanning agent such as cutch 30 kg 12 kg b) For Vegetable Tanned Leather Main vegetable tanning agents such as Wattle or Mimosa/ Quebracho Re-tanning agents such as cutch and Supplementary vegetable Tanning agents such as Gambier/ Chestnut/ Tara/ Sumac subject to the condition That Supplementary Tanning agents suchas Gambier, Chestnut, Tara and Sumac shall be allowed a maximum of 11 kg. 55 kg c) For Vegetable - Chrome Combination Tanned Leather (Semi-Chrome tanned Leather) (i) Vegetable Tanning Agent such as Wattle or Mimosa/ Quebracho Re-tanning agents such as cutch and Supplementary Vegetable tanning agents such as Gambier/ Chestnut/Tara/ Sumac subject to the condition that Supplementary Tanning Agents such as Gambier, Chestnut, Tara and Sumac shall be allowed a Maximum of 11 kg. 55 kg d) Eco tanning agents and supplementary (Glutaraldehyde, Silica tanning agent) 40 kgs (ii) Chrome Tanning Agent 13 kg. 13 Zirconium Tanning Salt 5 kgs 14 Sodium Formate/ Acetate 5 kgs 15 Sodium Bicarbonate 4 kgs 16 Soda Ash 2 kgs 17 Magnesium Oxide 2.5 kgs 18 Syntan 20 kgs 19 Borax 5 kgs 20 Oxalic Acid 2.50 kgs 21 Sodium thio-sulphate 5 kgs 22 Sodium Dithionate (Hy-drose) 1 kgs 23 Fatliquors 20 kgs 24 Dye Levelling Agent 1 kgs 25 Dyes (Acid dyes/ Direct Dyes/ Premetallised dyes/Basic Dyes/ Reactive dyes/ sulphur dyes) 10 kgs (Out of the total quantity of 10 kgs, the quantity of Reactive dyes shall not exceed 0.5 kg) 26 Dispersing Agent 2.5 kgs 27 Cationic dyes Fixative/Impregnating Resin 5 kgs 28 Pigments 10 kgs 29 a) Binders other than those indicated below 10 kgs b) Casein based binders OR 15 kgs Resin/Polyurathane based binders 10 kgs 30 Liquid Dyes (based on Acid dyes/Basic dyes/Metal complex dyes) 10 ltrs 31 Feel Modifiers 1 kg 32 Lacquer Emulsion 10 kgs 33 Slipagents (Silicon based Oil) 1 kg 34 Fixing Agents/ Cross Linkers (Formaldehyde free) 1 kg 35 Wax Emulsion 2 kgs 36 Oil/Wax for pull up finish 15 kgs 37 Fillers for Leather Industry 3 kgs 38 Spl. Auxiliaries for Stain/ Fire/ Grease/ Water/ Alkali/ Acid/ Oil resistance 5 kgs 39 Pearlised Pigment and Powder 1 kg 40 Fluorescent Pigment 4 kgs 41 Special Lacquer for Brush off/ Two tone 10 kgs 42 *Transfer foil (Polyester/ Polyurethane Metalised film - Silver/ Gold/ Bronze/ Mat/ Plain/ two Tone effect/ Glazy/ Nubuck effect/ Pull up effect/ Suede effect/Floral and other design effects) 120 sq.mtrs Note: *This item will be allowed only for laminated finished leather using the above Transfer Foil/Film. 43 Miscellaneous Items: a) Knife Blades/ Band Knives: Splitting Band Knife/Fleshing Knife/Shaving Knife As per note 3 below b) Grinding Wheels for Splitting Machine/Fleshing Machine/Shaving Machine c) Felt/ Felt Sleeves for Samming Machine/ Setting cum Samming/ Polishing Felt Roller, Flet/ Felt sleeves for Ironing / Embossing machine d) Stones: Polishing Stone Roller/wet Buffing stone Roller e) Emery Paper: Roll of 50 Metre Length f) Glazing Glass g) Padding Mohair cloth h) Embossing plate i) Mesh for Vaccum machine j) Roller /Design roller for Roller Coating Machine k) Roller/Design roller/Re-design roller /Re-furbishing roller for Roller plating machine 44 Relevant Hide/wet Blue of Goat/ Sheep/ Calf Net in sq ft + 15% Wasatge OR Relevant Crust Leather of Goat/ Sheep/ Calf Net in sq feet + 11% Wasatge Note: 1. Item No. (ii) for 12 (a) shall not be allowed for the grain garment leather and gloving leather. Note: 2. Supplementary Vegetable Tanning Agents Gambier/ Chestnut/ Tara/ Sumac shall be allowed for import on Actual User condition. In case of DFRC, these items shall be used by the licensee only and shall not be allowed for transfer/sale. a) Lactic Acid which is appearing as Deliming Agent against inputs shall not be allowed. b) Synthetic Resins and Hydroxy Ethyl Cellulose in any broad heading of Chemicals may not be allowed. c) Any product in the name of fillers may not be allowed because formulated products manufactured by Leather Chemical Companies (as supported by their technical data sheets) are used in Leather Industry. Note: 3 Items 43 (a) to 43 (k) above (i.e. all items taken together) allowed upto 5% of FOB value of export or 5% of Invoice Value in case of Deemed Export. Note:4. In case of Export of Suede and Nubuck Leather, the quantity of the import item 25 i.e Dyes shall be enhanced to 15 kgs (out of the total quantity of 15 kgs, the quantity of Reactive dyes shall not exceed 0.6kg). Note: 5. In case finished leather is manufactured from wet blue Leather/ Crust Leather, chemicals at sl# 1 to sl# 9 shall not be allowed Annexure-B GENERAL NOTES FOR LEATHER AND LEATHER PRODUCTS (PRODUCT: G) 1. Wherever import of Zip Fastener is allowed in specific cut length, the same will be allowed on net to net basis or with wastage indicated in the norms, if any. However, in case the same is imported in running length/ coil form, 1% wastage will be allowed. In case, where import of Zip fastener is not specifically permitted in the norms, the same may be allowed on Net to Net basis because some Shoes / Boots have 2 zippers per odd (4 per piece) depending on style. In the advance license/duty free replenishment certificate the description of the Zip fastener should clearly indicate the size i.e. length of the Zip fastener, brand, whether open or closed ends, whether metallic or non-metallic i.e. made of Aluminum or Brass or synthetic i.e. Nylon or polyester etc. 2. Wherever import of Thermo plastic sheets have been allowed for manufacture of counter and Toe caps/ puff, Thermo plastic cut components may also be allowed with a wastage of 2% as an alternative of Thermo plastic sheets. 3. For the purposes of import as preservative or penetrating agent, as the case may be, against export of leather products, only the following items will be permissible for import: 1. Thiocynto Methyl ThioBenzoThiozol (MCMTB) 30%/ 20%. 2. OctylIsoThiozolite 3-one (OITZ). 3. OrthophenylPhenate (Mixture or OPP + DCMC). 4. Against export of leather goods/ garments where the lining material has not been specifically permitted in the norms, the relevant lining materials may also be permitted on Net plus 5% wastage basis. 5. Wherever import of any kind of Lining, Wadding is allowed, the type, specification etc. should conform both in imports and exports. 6. Wherever import of dyes have been allowed, the same would mean Dyes of 100% strength (assay). In addition to quantity limit fixed, the CIF value of Dyes shall not exceed 6% of FOB value of exports. 7. For manufacture of leather products, wherever a request is made for import of processing chemicals for making finished leather, the same may be allowed as per standard norms available at Sl. No. G7 or G46, as the case may be, provided the final leather product is manufactured out of finished leather made from Hide/Wet Blue /Crust Leather of Cow/ Buffalo or Skins/Wet Blue /Crust Leather of Goat/ Sheep/ Calf in the exporter s own tanning unit or in the tanning unit of exporter s supporting manufacturer so declared and endorsed in the license. Import of finished leather be allowed as in Notes to respective SION. 8. For export of Dual Density (PU/TPU) Soles to be used as Component for Various Types of Footwear, the following import items (with quantities) may be allowed: - Import Item Qty. required for per kg. PU/TPU Sole 1. Polyol 230 gms. 2. Isocynate 270 gms. 3. Thermoplastic Poly Urethane (TPU) 460 gms. 4. Catalyst 50 gms. 5. Pigment Paste 30 gms. 6. Release Agent 45 gms.