9911796707
| Central Excise - Non Tariff - Notifications | ||||||||
|
Home |
||||||||
Central Excise Rules - Seventh Amendment of 1997 - 33/97 - Central Excise - Non Tariff |
||||||||
|
|
||||||||
Central Excise Rules - Seventh Amendment of 1997 Notification No. 33/97-C.E. (N.T.) Dated 1-8-1997 In exercise of the powers conferred by section 37 of the Central Excise Act, 1944 (1 of 1944), the Central Government hereby makes the following rules further to amend the Central Excise Rules, 1944, namely :- 1. (1) These rules may be called the Central Excise (Seventh Amendment) Rules, 1997. (2) They shall come into force on the 1st day of August, 1997. 2. In the Central Excise Rules, 1944, - (i) in rule 57F, in sub-rule (17), after clause (b), the following clauses shall be inserted, namely, - "(c) on the first day of August, 1997, with the manufacturer of ingots and billets of non alloy steel falling under heading Nos. 7206.90 and 7207.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), and who is required to pay duty under section 3A of the Central Excise Act, 1944 (1 of 1944), shall lapse and shall not be allowed to be utilised for payment of duty on any excisable goods, whether cleared for home consumption or for export; (d) on the first day of August, 1997, with the manufacturer of hot re-rolled products of non-alloy steel falling under heading Nos. 7211.11, 7211.19, 7211.30, 7211.52, 7211.59, 7211.60, 7211.92, 7211.99, 7213.90, 7214.90, 7215.90, 7216.10 and 7216.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), and who is required to pay duty under section 3A of the Central Excise Act, 1944 (1 of 1944), shall lapse and shall not be allowed to be utilised for payment of duty on any excisable goods, whether cleared for home consumption or for export"; (ii) in rule 57Q, in sub-rule (1), in the Table, in column (3), after item (ii) and the entries relating thereto, the following item and entries shall be added, namely :- "(iii) ingots and billets of non-alloy steel falling under sub-heading Nos. 7206.90 and 7207.90, manufactured in an induction furnace unit, whether or not any other goods are produced in such induction furnace, and hot re-rolled products of non-alloy steel falling under sub-heading Nos. 7211.11, 7211.19, 7211.30, 7211.52, 7211.59, 7211.60, 7211.92, 7211.99, 7213.90, 7214.90, 7215.90, 7216.10 and 7216.90 on which duty is paid under section 3A of the Central Excise Act, 1944 (1 of 1944)."; (iii) in rule 57S, after sub-rule (10), the following sub-rule shall be inserted, namely :- "(11) Notwithstanding anything contained in sub-rule (3) of rule 57Q, any credit of specified duty lying unutilised, - (a) on the first day of August, 1997, with the manufacturer of ingots and billets of non-alloy steel falling under sub-heading Nos. 7206.90 and 7207.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), and who is required to pay duty under section 3A of the Central Excise Act, 1944 (1 of 1944), shall lapse and shall not be allowed to be utilised for payment of duty on any excisable goods, whether cleared for home consumption or for export.; (b) on the first day of August, 1997, with the manufacturer of hot re-rolled products of non-alloy steel falling under sub-heading Nos. 7211.11, 7211.19, 7211.30, 7211.52, 7211.59, 7211.60, 7211.92, 7211.99, 7213.90, 7214.90, 7215.90, 7216.10 and 7216.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), and who is required to pay duty under section 3A of the Central Excise Act, 1944 (1 of 1944), shall lapse and shall not be allowed to be utilised for payment of duty on any excisable goods, whether cleared for home consumption or for export."; (iv) in Chapter V, after section E - X, the following section shall be inserted, namely :- "E - XI Non-alloy steel ingots and billets/hot re-rolled products 96ZO. Procedure to be followed by the manufacturer of ingots and billets. - (1) A manufacturer of non-alloy steel ingots and billets falling under sub-heading Nos. 7206.90 and 7207.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), shall debit an amount calculated at the rate of Rs. 750 per metric tonne at the time of clearance of ingots and billets of non-alloy steel from his factory in the account-current maintained by him under sub-rule (1) of rule 173G of the Central Excise Rules, 1944, subject to the condition that the total amount of duty liability shall be calculated and paid in the following manner :- I. Total amount of duty liability for the period from the 1st day of August, 1997 to the 31st day of March, 1998 (a) a manufacturer shall pay a total amount calculated at the rate of Rs. 750 per metric tonne on capacity of production of his factory for the period from 1st day of August, 1997 to the 31st day of March, 1998, as determined under the Induction Furnace Annual Capacity Determination Rules, 1997. This amount shall be paid by 31st day of March, 1998; (b) the amount of duty already paid, together with on-account amount paid by the manufacturer, if any, during the period from 1st day of August, 1997 to the 31st day of March, 1998, shall be adjusted towards the total amount of duty liability payable under clause (a); (c) if a manufacturer fails to pay the total amount of duty payable under clause (a) by the 31st day of March, 1998, he shall be liable to pay the outstanding amount along with interest at the rate of eighteen per cent. per annum on the outstanding amount, calculated for the period from the 1st day of April, 1998 till the date of actual payment of the whole of the outstanding amount. II. Total amount of duty liability for a financial year subsequent to 1997-98 (a) a manufacturer shall pay a total amount calculated at the rate of Rs. 750/- per metric tonne on the annual capacity of production of his factory as determined under the Induction Furnace Annual Capacity Determination Rules, 1997. This amount shall be paid by the 31st day of March of the financial year; (b) the amount of duty already paid, together with on-account amount paid by the manufacturer, if any, during the financial year shall be adjusted towards the total amount of duty liability; (c) if a manufacturer fails to pay the total amount of duty payable under clause (a) by 31st day of March, of the relevant financial year he shall be liable to pay the outstanding amount along with interest at the rate of eighteen per cent. per annum on the outstanding amount, calculated for the period from the 1st day of April, of the immediately succeeding financial year till the date of actual payment of the whole of the outstanding amount. (2) Where a manufacturer does not produce the ingots and billets of non-alloy steel during any continuous period of not less than seven days and wishes to claim abatement under sub-section (3) of section 3A of the Central Excise Act, 1944, the abatement will be allowed by an order passed by the Commissioner of Central Excise of such amount as may be specified in such order, subject to the fulfilment of the following conditions, namely :- (a) the manufacturer shall inform in writing about the closure to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, either prior to the date of closure or on the date of closure; (b) the manufacturer shall intimate the reading of the electricity meter to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, immediately after the production in his factory is stopped along with the closing balance of stock of the ingots and billets of non-alloy steel; (c) the manufacturer, when he starts production again, shall inform in writing about the starting of production to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, either prior to the date of starting production or on the date of starting production; (d) the manufacturer shall on start of production again along with the closing balance of stock on restarting the factory, intimate the reading of the electricity meter to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise; (c) the manufacturer shall while sending intimation under clause (c), declare that his factory remained closed for a continuous period starting from ____ hours on _______ (date) to _______ hours on _____(date). (3) Notwithstanding anything contained elsewhere in these rules, if a manufacturer having a total furnace capacity of 3 metric tonnes installed in his factory so desires, he may, in the beginning of each month from 1st day of August, 1997 to the 31st day of March, 1998 or any other financial year, as the case may be, and latest by the tenth of each month, pay a sum of rupees five lakhs and the amount so paid shall be deemed to be full and final discharge of his duty liability for the period from the 1st day of August, 1997 to the 31st day of March, 1998, or any other financial year, as the case may be, subject to the condition that the manufacturer shall not avail of the benefit, if any, under proviso to sub-section (3) or under sub-section (4) of the section 3A of the Central Excise Act, 1944 (1 of 1944) : Provided that for the month of August, 1997 the Commissioner may allow a manufacturer to pay the sum of rupees five lakhs the 31st day of August, 1997 : Provided further that if the capacity of the furnaces installed in a factory is more than or less than 3 metric tonnes, or there is any change in the total capacity, the manufacturer shall pay the amount, calculated pro rata : Provided also that where a manufacturer, fails to pay the whole of the amount payable for the month of August, 1997 by the 31st day of August, 1997 or for any other month by the tenth of each month, as the case may be, he shall be liable to pay the outstanding amount along with interest thereon at the rate of eighteen per cent. per annum, calculated for the period from the 1st day of September, 1997 or the tenth of the month, as the case may be, till the date the actual payment of the whole of the outstanding amount. Explanation. - For removal of doubts it is hereby clarified that sub-rule (3) does not apply to an induction furnace unit which ordinarily produces castings or stainless steel products but may also incidentally produce non-alloy steel ingots and billets. (4) In case a manufacturer wishes to avail of discharging his duty liability in terms of sub-rule (3), he shall inform the Commissioner of Central Excise, with a copy to the Assistant Commissioner of Central Excise, in the following proforma : "We _________ (name of the factory), located at _________ (address) hereby wish to avail of the scheme described in sub-rule (3) of rule 96ZO, for full and final discharge of our duty liability for the manufacture of ingots and billets of non-alloy steel under section 3A of the Central Excise Act, 1944 (1 of 1944). Dated _____________ Sd_________________ Name and Designation (With Stamp)" 96ZP. Procedure to be followed by the manufacturer of hot re-rolled products. - (1) A manufacturer of non-alloy steel hot re-rolled products falling under sub-heading Nos. 7211.11, 7211.19, 7211.30, 7211.52, 7211.59, 7211.60, 7211.92, 7211.99, 7213.90, 7214.90, 7215.90, 7216.10 and 7216.90 of the Schedule to the Central Excise Tariff Act, 1985 (5 of 1986), shall debit an amount calculated at the rate of Rs. 400/- per metric tonne at the time of clearance of hot re-rolled products of non-alloy steel from his factory in the account-current maintained by him under sub-rule (1) of rule 173G of the Central Excise Rules, 1944, subject to the condition that the total amount of duty liability shall be calculated and paid in the following manner :- I. Total amount of duty liability for the period from the 1st day of August, 1997 to the 31st day of March, 1998 (a) a manufacturer shall pay a total amount calculated at the rate of Rs. 400/- per metric tonne on capacity of production of his factory for the period from 1st day of August, 1997 to the 31st day of March, 1998, as determined under sub-rule (3) of rule 3 of the Hot Re-rolling Mills Annual Capacity Determination Rules, 1997. This amount shall be paid by 31st day of March, 1998; (b) the amount of duty already paid, together with on-account amount paid by the manufacturer, if any, during the period from 1st day of August, 1997 to the 31st day of March, 1998, shall be adjusted towards the total amount of duty liability payable under clause (a); (c) if a manufacturer fails to pay the total amount of duty payable under clause (a) by the 31st day of March, 1998, he shall be liable to pay the outstanding amount along with interest at the rate of eighteen per cent. per annum on the outstanding amount, calculated for the period from the 1st day of April, 1998 till the date of actual payment of the whole of the outstanding amount. II. Total amount of duty liability for a financial year subsequent to 1997-98 (a) a manufacturer shall pay a total amount calculated at the rate of Rs. 400/- per metric tonne on capacity of production of his factory as determined under sub-rule (3) of rule 3 of the Hot Re-rolling Mills Annual Capacity Determination Rules, 1997. This amount shall be paid by the 31st day of March of the financial year; (b) the amount of duty already paid, together with on-account amount paid by the manufacturer, if any, during the financial year shall be adjusted towards the total amount of duty liability; (c) if a manufacturer fails to pay the total amount of duty payable under clause (a) by 31st day of March of the relevant financial year, he shall be liable to pay the outstanding amount along with interest at the rate of eighteen per cent. per annum on the outstanding amount, calculated for the period from the 1st day of April of the immediately succeeding financial year till the date of actual payment of the whole of the out-standing amount. (2) Where a manufacturer does not produce the hot re-rolled products of non-alloy steel during any continuous period of not less than seven days and wishes to claim abatement under sub-section (3) of section 3A of the Central Excise Act, 1944, the abatement will be allowed by an order passed by the Commissioner of Central Excise of such amount as may be specified in such order, subject to the fulfilment of the following conditions, namely :- (a) the manufacturer shall inform in writing about the closure to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, either prior to the date of closure or on the date of closure; (b) the manufacturer shall intimate the reading of the electricity meter to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, immediately after the production in his factory is stopped along with the closing balance of stock of the hot re-rolled products of non-alloy steel; (c) the manufacturer, when he starts production again, shall inform in writing about the starting of production to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise, either prior to the date of starting production or on the date of starting production; (d) the manufacturer shall on start of production again along with the closing balance of stock on restarting the factory, intimate the reading of the electricity meter to the Assistant Commissioner of Central Excise, with a copy to the Superintendent of Central Excise; (e) the manufacturer shall while sending intimation under clause (c), declare that his factory remained closed for a continuous period starting from ________ hours on __________ (date) to ___________ hours on ________(date). (3) Notwithstanding anything contained elsewhere in these rules, a manufacturer may, in the beginning of each month from 1st day of August, 1997 to the 31st day of March, 1998 or any other financial year, as the case may be, and latest by the tenth of each month, pay a sum equivalent to one-twelfth of the amount calculated at the rate of Rs. 300/- multiplied by the annual capacity in metric tonnes, as determined under sub-rule (3) of rule 3 of the Hot Re-rolling Mills Annual Capacity Determination Rules, 1997, and the amount so paid shall be deemed to be full and final discharge of his duty liability for the period from the 1st day of August, 1997 to the 31st day of March, 1998, or any other financial year, as the case may be, subject to the condition that the manufacturer shall not avail of the benefit, if any, under the proviso to sub-section (3) or under sub-section (4) of the section 3A of the Central Excise Act, 1944 (1 of 1944) : Provided that in respect of the non-alloy steel hot re-rolled products, manufactured or produced by a re-rolling mill in which the nominal diametre on last stand does not exceed 200 millimetres, the sum payable under this sub-rule shall be calculated as if for the letters and figures "Rs. 300/-", the letters and figures "Rs. 150/-" were substitued : Provided further that for the month of August, 1997, the manufacturer may pay the amount due for the said month by the 31st of August, 1997 : Provided also that if a manufacturer makes a change in the capacity of re-rolling installed in his factory, or there is any change in the total re-rolling capacity installed, he shall pay the amount, calculated pro rata : Provided also where a manufacturer, fails to pay the whole of the amount payable for the month of August, 1997 by the 31st day of August, 1997 or for any other month by the tenth of each month, as the case may be, he shall be liable to pay the outstanding amount along with interest thereon at the rate of eighteen per cent. per annum, calculated for the period from the 1st day of September, 1997 or the tenth of the month, as the case may be, till the date the actual payment of the whole of the outstanding amount : Provided also that where a manufacturer has paid the amount during any month on the basis of provisional determination of annual capacity and subsequently the annual capacity is determined on final basis, the manufacturer shall pay the whole of the differential amount recoverable for the relevant months by the tenth of the month succeeding the month in which the annual capacity is determined on final basis. (4) In case a manufacturer wishes to avail of discharging his duty liability in terms of sub-rule (3), he shall inform the Commissioner of Central Excise, with a copy to the Assistant Commissioner of Central Excise, in the following proforma : "We _________ (name of the factory), located at _________ (address) hereby wish to avail of the scheme described in sub-rule (3) of rule 96ZP, for full and final discharge of our duty liability for the manufacture of hot re-rolled products on non-alloy steel under section 3A of the Central Excise Act, 1944 (1 of 1944). Dated _____________ Sd_________________ Name and Designation (With Stamp)"
Retrospective Amendment to this notification vide Finance (No. 2) Act, 2009 as
|
||||||||
|
|
