Specified Goods falling within one or more Chapters Imported for Manufacture of Specified Goods - G.E. No. 193D - 174/92 - Customs -Tariff

Specified Goods falling within one or more Chapters Imported for Manufacture of Specified Goods - G.E. No. 193D Notification No. 174/92-Cus. Dated 30-4-1992 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods specified in column (3) of the Table hereto annexed and falling within one or more Chapters of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975), specified in the corresponding entry in column (2) of the said Table, when imported into India for the purpose of manufacture of the goods specified in the corresponding entry in column (4) of the said Table, from so much of the duty of customs leviable thereon which is specified in the said First Schedule, as is in excess of the amount calculated at the rate of 55 per cent ad valorem , subject to the following conditions, namely :- (i) an officer not below the rank of a Joint Director in the Department of Electronics of the Government of India or a Joint Director in the Directorate of Industries of the Government of a State or an Additional Industrial Adviser in the Directorate General of Technical Development of the Government of India, as the case may be, is satisfied that the goods in question are required for the purpose as specified in column (4) of the said Table and recommends grant of the above exemption : Provided that this condition shall not apply in the case of goods imported against supplementary import licences; (ii) the importer shall, by the execution of a bond in such form or for such sum as may be specified by the Assistant Collector of Customs, bind himself to pay, on demand, in respect of such goods as are not proved to the satisfaction of the Assistant Collector of Customs to have been used for the said purpose, an amount equal to the difference between the duty leviable on such imported goods but for the exemption contained herein and that already paid at the time of importation. TABLE S. No. Chapter of the First Sche dule to the Customs Ta riff Act, 1975 Description of goods For the manufacture of goods (1) (2) (3) (4) 1. 74 Copper foils (plain or adhesive coated) Copper clad laminates of phenolic or glass epoxy types, multilayer printed circuit boards. 2. 38, 85 (i) Getters (ii) Tungsten coils Electronic valves and tubes. 3. 40, 59 (i) Bungs (ii) Rubber Pinch rollers with or without plastic bush Electrolytic capacitors, tape deck mechanisms. 4. 38, 68, 85 Graphite jigs/blocks/rods or plates Semiconductor devic-es, electronic valves and tubes, glass to metal seals, transistor headers and mono-crystalline silicon ingots/wafers. 5. 39 Flexible folding disk jacket with liner Floppy diskettes. 6. 72, 73 Solder plated copper plated steel wires of dia 0.04 mm to 1.1 mm Capacitors, resistors (other than heating resistors), RF/IF coils, lead tabs. 7. 72 Stainless/heat resisting steel wires of size thinner than 0.31 mm dia (30 SWG) Potentiometers. 8. 74 Brass pipes/tubes of thickness of 0.2 mm to 0.3 mm (30 SWG) with OD of 2.5 mm to 13 mm Telescopic antennas. 9. 39 Glass epoxy or/and poly-amide pro-pregs Multilayer printed circuit boards, copper clad laminates. 10. 71, 85 Silfos wire/gate wire/tinned copper braided wire Semiconductor devices. 11. 48, 76 Kraft paper/tissue paper or aluminium foil for voice coil Loudspeakers. 12. 83, 85 Tubular rivets of length upto 35 mm and inner diameter upto 1.5 devices. mm Potentiometers, semiconductor 13. 38 Colloidal graphite in alcohol Resistors (other than heating resistors) 14. 39, 59, 73 Screen mesh of stainless steel/polyester/metallised polyester or nylon (in sizes of mesh 60 or above) Semiconductor devices, printed circuit boards, potentiometers, capacitors including ceramic capacitors, hybrid microcircuits, printed components. 15. 39 Polymide/polymide-amide tape, film or sheet Connectors, capacitors grade metallised plastic films. 16. 37 (i) High resolution, high contrast photographic films and photo stencil films (ii) DIAZO (C6H5N2) films (iii) Release film for mul tilayer laminates (iv) Dia positive of screen drawing Printed circuit boards, semiconductor devices, potentiometers, capa citors, hybrid micro circuits, printed com ponents. 17. 48, 59 Lint free towels/paper Potentiometers, semi-conductor devices, hybrid microcircuits, printed components. 18. 39 Heat shrinkable PVC sleeving, tubing, firm or ring Capacitors, semicon-ductor devices, DC Micromotors, relays, deflection components. 19. 39 Splicing tape Magnetic tape, casse ttes. 20. 39, 48 Insulating/taping material including pocket carrier tape) in tape, roll or strip form with or without adhesives Capacitors, deflection components, resistors (other than heating resistors), printed cir cuit boards, poten tiometers, semi-con ductor devices, Indu ctors 21. 85, 84, 58, 69 (i) Silicon carbide heating elements (ii) Molybdenum Silicide/ Molybdenum disilicide heating elements (iii) Silicon carbide rollers (iv) Inconel steel rollers (v) Conveying trays (vi) TP Furnace and trays (vii) Saggers Ferrites, ceramic capa citors, potentiometers, semiconductor devices. 22. 28, 34, 39, 48, 61, 68, 70, 82, 84, 85 (a) Mica and Micualex washers (b) Abrasive powder, (c) Parts of doping systems (d) Plastic film for wafer dicing (e) Sputtor targets (f) Etch disc (g) Film Template (h) Special Gases (i) Hydrogen chloride (ii) 100% silane (iii) Ammonia (iv) Dichlorosilane (v) Argon (vi) Etch gas (vii) Hexaluoroethane (viii) 5% phosphine in nitrogen (ix) Freon 14 (x) 15% phosphine in nitrogen (xi) Helium (xii) 15% Arsene in hydrogen (xiii) Boron trifluoride (xiv) Nitrogen in lacture bottles (xv) Sulphur hexafluoride Semiconductor devices, silicon (in all forms), Hybrid Microcircuits. 23. 32 Printing ink for printing on aluminium plates Decorative name plates for tape recorders. 24. 27, 34, 39 (i) Silicon grease (ii) Cyanoacrylate or anac robic sealants (iii) Molybdenum based lubricating compound (iv) Kilopoise lubricating grease Potentiometers, tape deck mechanisms, swi tches, relays, heat sinks, electronic valves and tubes. 25. 28, 69 (i) Recrystallised Zirconia (ii) Recrystallised aluminium crucibles Mounted piezoelectric crystals. 26. 39, 73, 79, 85 Parts of magnetic sound heads Magnetic sound heads. 27. 39 Antistatic materials in the form of tubes, straps, bags, mats, covers, bins, boxes, containers Semiconductor devices, Hybrid Microcircuits. 28. 28, 37, 38, 39, 71, 73 (i) Bismuth lead-Tin alloy (ii) Nickel plated steel strip (iii) Freon Solvent TDA-5 (iv) Freon Solvent TDA-55 (v) 3% Silane in nitrogen (vi) Phosphane Silane in nitrogen (vii) Alkyd moulding compound (viii) Neutra clean 68/68D (ix) Freon TMSS (x) Pur-A Masq (xi) Sodium Hypophosphate (xii) Culmo-Starter (xiii) Culmo-Brightner (xiv) Cuimo AN (xv) Cuimo IRL (xvi) Freon Solvent TDA-35 (xvii) Freon Solvent TF (xviii) Diborane in Argon (xix) Tin-Silver Antimony alloy Semiconductor devices. 29. 28, 29, 34, 38, 81, 85 (i) Glass to metal seals (ii) Lead-Tin alloy rings/ tablets/sticks (iii) Colloidal graphite (iv) Collophan Tantalum Capacitors. 30. 85 Anode assembly consisting of EHT cable, silicone rubber cap and contact spring Deflection components 31. 39, 40, 56, 85 (i) PVC Jacket flats (ii) Burnishing/Wiping Tape (iii) Tyvec sleeves (iv) PVC Jacket cutting laminated with non-woven liner cloth (v) Hub Ring (vi) Lap film Floppy diskettes. 32. 40, 55, 81 (i) Zirconium Trays (ii) Zirconium Setters Ceramic capacitors 33. 85 Parts of video head drum assembly Video tape deck mechanism, Video head drum assembly. 34. 85 Casings of aluminium Electrolytic capacitors. 35. 69, 85 Clips including short clips Switches, relays, magnetic heads, mica capacitors. 36. 39 ABS moulding compound/ powder/resin with or without fillers Relays, switches, connectors, tape deck mechanisms, potentio-meters, RF/IF Coils. 37. 28, 32, 34, 29, 37, 38 (i) Screen printing inks, dyes, emulsions, lacquers, films (including sensitisers, hardeners, catalysts) (ii) Screen mounting adhesives (iii) Screen decoating compo-unds powders (iv) Special marking inks Printed circuit boards, semiconductor devices, potentiometers, capa citors, hybrid micro circuits, printed compo nents, coils and indu ctors, resistors (other than heating resistors). 38. 70 Glass wool, quartz wool Semiconductor devices. 39. 39, 68, 73 Lapping vehicles, Lapping pads, Lapping films, Lapping compounds (i) Diamond lapping paint (ii) Polyurethane lapping pads (iii) Blue steel lapping carriers (iv) Polyester based lapping film (v) Lapping/abrasive grains, powders or compounds (including aluminium oxide, cerium oxide and silicon carbide powders, grains or compounds) Mounted piezoelectric crystals, printed circuit boards, semiconductor devices, potentiome ters, resistors (other than heating resistors), connectors, switches, relays, tape deck mechanisms, magnetic heads, deflection com ponents, DC Micro motors upto 13.5 volts and not exceeding 20 watts rating, silicon (in all forms). 40. 39, 73 (i) Moulded shell with liner (ii) PVC lifter (iii) Write Protect Notch (iv) Steel hub ring, spring, shutter Floppy diskette (3½" size).