Amendment to Notification No. 46/85 - 078/88 - Customs -Tariff

Amendment to Notification No. 46/85 Notification No. 78/88-Cus. Dated 1-3-1988 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby makes the following further amendments in the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 46/85-Customs, dated the 28th February, 1985, namely, - In the Table annexed to the said notification, - (i) for the Sl. Nos. 2 to 7, 12, 15, 17 to 20, 22, 23 and 31 and entries relating thereto, following Sl. Nos. and entries relating thereto shall respectively be substituted, namely :- S. No. Description of Horological Raw Materials Sizes (1) (2) (3) "2. Horological brass strips and sheets in coil or flats. Thikness up to 4 mm. Width up to 40 mm. 3. Leaded brass strips in coil or in straight length. Thickness 0.02 mm to 2.55 mm. Width up to 50 mm. 4. Leaded naval brass strips in coils Thickness 0.12 mm to 3 mm. Width 8 mm to 30 mm. 5. Nickel silver brass/strips/flats Thickness 0.10 mm to 1.50 mm. Width 6 to 55 mm. 6. Phosphor bronze strips Thickness 0.02 mm to 0.15 mm. Width from 15 mm to 30 mm. 7. Phosphor bronze rods Diameter 0.5 mm to 2.00 mm. Length up to 3000 mm"; "12. Super alloy strips Thickness up to 0.50 mm Width up to 25 mm"; "15. Stainless steel strips Thickness 0.01 mm to 0.8 mm. Width up to 30 mm."; "17. Brass flats Thickness up to 6.5 mm. Width up to 50 mm. Length up to 2000 mm. 18. Brass rods Diameter up to 36.5 mm. 19. Nickel silver rods Diameter up to 3 mm. Length up to 3000 mm. 20. Leaded brass pipes Outer diameter 18 mm. to 35 mm. Inner diameter 10 mm. to 30 mm."; "22. Cold rolled stainless steel strips for the manufacture of watch back coversand bezel rings. Thickness 0.5 mm. to 1.5 mm. for back cover and 2 mm to 4.5 mm. for bezel rings. Width up to 51 mm. for both. 23. Unleaded brass strips Thickness 0.10 mm. to 1.5 mm. Width 5 mm. to 50 mm."; "31. Silver solder core wire for dial legs in straight length or in coil Diameter 0.4 mm. to 1.0 mm.": (ii) after Sl. No. 32 and entries relating thereto following Sl. Nos. and entries shall be inserted, namely :- (1) (2) (3) "33. Free cutting quality stainless steel rods. Diameter up to 5.0 mm. Length up to 3000 mm. 34. Polyamide strips Thickness up to 0.10 mm. Width up to 15 mm. 35. Copper berillium strips in coil Thickness up to 0.35 mm. Width up to 25 mm. 36. Polished steel strips in coil Thickness 0.05 to 0.5 mm. Width up to 15 mm. 37. Leaded brass rods Diameter 0.5 mm to 10 mm; Length up to 3000 mm. 38. Nickel silver strips Thickness 0.4 mm. to 0.5 mm. Width up to 50 mm. 39. Titanium copper strips in coils/cut lengths. Thickness 0.18 to 0.20 mm. Width 15 mm. to 20 mm. 40. Aluminium alloy strips in coils Thickness 0.55 mm. Width 35 mm. 41. Leaded Beryilium copper rods Diameter : 2.20 mm. to 2.5 mm. Length up to 2000 mm. 42. Stainless steel pipes Outer diameter : 1.80 mm. Inner diameter : 1.54 mm. Length up to 2000 mm.".