9911796707
TMI BlogAmendments/additions/corrections in Standard Input output normsX X X X Extracts X X X X X X X X Extracts X X X X ..... C-1994 shall be added as per Annexure C to this Public Notice. PLASTICS PRODUCTS After the existing entry at Sl.No.H-545, new entry at Sl.No.H-546 shall be added as per Annexure D to this Public Notice. This issues in public interest. Sd/- ( K. T. CHACKO ) DIRECTOR GENERAL OF FOREIGN TRADE (S.B.S.REDDY) Jt. DIRECTOR GENERAL OF FOREIGN TRADE (F.No.01/87/171/00002/AM04/DES-VIII) Annexure A to the Public Notice No. 11 Dated: 01/10/2004 AMENDMENTS/CORRECTIONS Sl.No. Page No. Reference Amendments/Corrections 1 2 3 4 1. 130 Chemical & Allied Product Sl.No.A-956 The norm covered by this entry is substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A956 Sulphur Black 1 (Sulphur Black OG/Sulphur Black OG Grains) (Dye content 86%) 1 kg 1. Benzene 0.383 kg 2. Caustic Soda Flakes 0.951 kg 3. Soda Ash 0.061 kg 4. Sulphur 0.910 kg 5. Sodium Sulphide Flakes 0.295 kg 2. 167 Chemical & Allied Product Sl.No.A-1365 The norm covered by this entry is substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A1365 Hydroxylamine Sulphate 1 kg 1. Soda Ash 1.80 Kg ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... g Ink ( 37 +/-1% Pigment and 33+/- 1% Solid Resin) 0.4120 kg 2. Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.2575 kg 3. Printing Ink Vehicle Plain (Solid Content 61+/-1%) Linseed Oil Base Or Soyabean Oil Base 0.2575 kg 4. Polyethylene Wax Compound containing 43%+/-1% Polyethylene wax 28+/-1%, Tung Oil and 28+/-1% Refined Linseed Oil 0.0310 kg 5. PTFE wax compound containing 61%+/-1% PTFE wax, 33% +/- 1% Refined Linseed Oil 0.0020 kg 6. Cobalt Magnesium Combined Drier (metal content 12% +/-1% 0.2%) 0.0103 kg 7. Petroleum Distillate (Distillation Range 240-330 Degree C) 0.0597 kg 9. 7-8 Chemical & Allied Product Sl.No.A2891 (amended vide Public Notice No.10 Dated:30/05/2003) The norm covered by this entry is substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed A2891 Offset Printing Ink Yellow (Pigment content 14 +/- 1% and Solid Resin 43+/- 1% (Flush Route) 1 kg 1. Flush Yellow for Printing Ink ( 35 +/- 1% Carbon Black and 32+/- 1% Solid Resin) 0.4120 kg 2. Printing Ink Vehicle Gel (Solid content 59+/-1%) Linseed Oil base OR Soyabean Oil Base) 0.2575 kg ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... l & Allied Product Sl.Nos. (Notified vide Public Notice No.77 Dated:26/08/2004) On page No. 1 of the said Public Notice, the numbering of the Standard Input Output Norms entries stands corrected to read as under:- After the existing entries at Sl. No. A3378, New Entries At. Sl. No. A-3379 to A3388 are added as per Annexure B to this Public Notice 19. 6 Engineering Product Sl.No.C446 (Notified vide Public Notice No. 50 Dated:16/02/2004) In the description of export item the word and allied equipment stands deleted. 20. 8 Engineering Product Sl.No.C985 (amended vide Public Notice No. 46 Dated:06/11/2002) The norm covered by this entry shall be substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed C985 Automotive Radiators made of Copper & Brass 1 kg 1. Copper Foils 0.22 Kg 2. Brass foils/tubes OR 0.22 kg (a) Copper Cathode/ Wire bar / ingot/Rod 0.162 kg (b) Zinc Ingot 0.07 kg 3. Brass Sheet OR 0.31 kg (a) Copper Cathode/ Wire bar/ Rod 0.228 kg (b) Zinc Ingot 0.098 kg 4. (a) Tin Ingot 0.070 kg (b) Lead Ingot 0.074 kg 5. Terene Sheet or CRCA Sheet/ Coil/ Strips 0.22 kg 6. Flux 1% ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ce No.58 Dated:12/04/2004) The description of export item is amended to read as under:- Pressure Die Cast/Sand Cast Components / Articles made of Aluminum Alloy 28. 2 Engineering Product Sl.Nos. (Notified vide Public Notice No. 77 Dated: 26.08.2004) On page No.2 of the said Public Notice the numbering of the Standard Input Output Norms entries stands corrected to read as under:- After the existing entry at Sl. No. C- 1975, New entries at Sl. No. C1976 to C1985 are added as per Annexure C to this Public Notice 29. 961 - 962 Plastics Product Sl.No.H-5 The norm covered by this entry is substituted by the following:- Sl.No. Export Item Qty. Import Item Qty. Allowed H-5 ABS Resin / Granules (Injection Moulding / Sheeting Grade) 1 MT 1. Styrene 639 kg 2. Aqcrylonitrile 271 kg 3. Butadiene 190 kg 4. Oleic Acid or Distilled Fatty Acid 21 kg 5. Teritary Dodecyl Mercaptan/ Normal Dodecyl Mercaptan 7 kg 6. Potassium Persulphate 5 kg 7. Disprosin / Rosin 25 kg 8. Ethylene Bisstearamide 25 kg 9. Antioxidant (OBP/Sumilizer/ DTDTDP/DBP/ TNPP/BHT/ Irgonox-1076 31 kg 10. Pigment/ Titanium Dioxide/Relevant Colour Master Batch ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... in the export product 34. 2 Textile Product Sl.Nos. (Notified vide Public Notice No. 77 Dated: 26.08.2004) On page No. 2 of the said Public Notice the numbering of the Standard Input Output Norms entries stands corrected to read as under:- After the existing entry at Sl. No. J-361 New entry at Sl. No. J-362 is added as per Annexure D to this Public Notice 35. 1132 Miscellaneous Product Sl.No.K-77 The norm covered by this entry stands deleted. Annexure B to the Public Notice No. 11 Dated: 01/10/2004 CHEMICALS AND ALLIED PRODUCTS Sl.No. Export Item Qty. Import Item Qty. Allowed A3389 Oil soluble Phenolic resin based varnish (high viscosity) (solid resin content Min. 55.7% + 2%) 1.00000 kg 1. Glycerine 0.00005kg 2. Tertiary butyl catechol 0.00010kg 3. Tri phenyl Phosphite 0.00012kg 4. Light Magnesium oxide 0.00012 kg 5. Bis phenol-A 0.00220kg 6. Butylated hydroxy toluene 0.00407 kg 7. Para tertiary butyl phenol 0.00463 kg 8. Nomelt -2- 1200/ high melting grease 0.00490kg 9. Slyvablend FA 7002/dimmer acid 0.00572kg 10. Trimethylol propane 0.00651kg 11. Oxy aluminium octoate ( OAO) 0.01523 kg 12. Iso phtha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... g. 2. Epichlorohydrin 4.80 Kg. 3. Methyline Chloride 1.55 Kg. A4000 Flush in various colours for Printing Ink (35+/-1% Pigment and 32+/- 1% Solid Resin) other than Black, Cyan, Magenta & Yellow) 1 kg 1. Relevant Pigment 0.36 kg 2. Printing Ink Vehicle Plain (Solid content 61+/-2%) (linseed Oil base or Soya bean oil base) 0.34 kg 3. Alkyd resin namely soya long oil alkyd resin of 70% oil length having solid content 100% / Linseed oil base alkyd resin (long oil length) having solid content 100% 0.012 kg 4. Petroleum Distillate (Distillation range 240-330 Degree C 0.13 kg 5. Oleyl Alcohol 0.03 kg 6. Anti Oxidant, namely BHT and MEHQ 0.01 kg 7. Texanol Isobutyrate 0.03 kg A4001 Copper & Lead Free Mirror on Float Glass 1 M.T. (not less than 100 sq. meter) 1. Clear Glass OR 1.05 MT (not more than 105 Sq. meter) 1(a) Silica Sand 828.45 kg 1(b) Soda Ash (Sodium Carbonate Dense) 249.90 kg 1(c) Dolomite 197.40 kg 1(d) Calcite (Calcium Carbonate) 79.275 kg 1(e) Sodium Sulphate 9.45 kg 1(f) Furnace Oil 246.75 kg 1(g) PMMA Base Interlevant Powder 0.0492 kg 2. Mirror Back Paint Top Coat Lead Free (70% Solid Conten ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Foil On net to net basis with accountability of its use in the export 3. Banana Plug On net to net basis with accountability of its use in the export A4010 Fortified Gum Rosin Dispersion containing 60% Rosin 1 kg 1. Rosin 0.600 kgs A4011 Automobile Exhaust Catalyst Honey comb type EC 800 sizes 81.28 mm x 144.78 mm x 75.3 mm length containing Palladium content : 0.210 gm Rhodium content : 0.210 gm Cerium Oxide content : 10.6 gm and Clay Washcoat Powder : 52 gm 1 No. 1. Relevant Ceramic Honeycomb Subtract (Size 81.28 mm x 144.78 mm x 75.3 mm length) 1 No. 2. Palladium as Palladium Chloride 0.210 gm 3. Rhodium as Rhodium Nitrate Solution 0.042 gm 4. Collodial Cerium Acetate 0.054 kg 5. Clay Wash coat Powder 0.052 kg A4012 Automobile Exhaust Catalyst Honey comb type EC 1500 M size 132.08 mm x 78 mm Length containing : Platinum content : 0.251 gm Cerium Oxide content : 14.32 gm and Zirconium Oxide 19.67 gm 1 No. 1. Metallic Honeycomb Subtract (Size 132.08 mm dia x 78 length) 1 No. 2. Platinum as Platinum Sulphite Acid Solution 0.251 gm 3. Collodial Cerium Acetate 0.055 kg 4. Zirconium Colladial 0.020 kg 5. Zirconium Oxide ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Zinc (If export product is galvanised) 0.8% of weight of export product Note: The quantity of import of Mild Steel Round Bars to be allowed as under:- S.No. Size of export product Raw material in Kg to be allowed for 1 Kg of export product (a) (b) (c) 1 ¾" X ½" X 9/16" L 4.00 2 1" X ½" X 5/8" L 2.10 3 1" X ¾" X 5/8" L 3.75 4 1 ¼" X ½" X ¾" L 1.80 5 1 ¼" X ¾" X ¾" L 2.35 6 1 ¼" X 1" X ¾" L 2.90 7 1 ½" X ½" X ¾" L 1.70 8 1 ½" X ¾" X ¾" L 1.80 9 1 ½" X 1" X ¾" L 2.50 10 1 ½" X 1 ¼" X ¾" L 5.00 11 2" X ½" X 7/8" L 1.50 12 2" X ¾" X 7/8" L 1.65 13 2" X 1" X 7/8" L 1.95 14 2" X 1 ¼" X 7/8" L 2.65 15 2" X 1 ½" X 7/8" L 3.70 C1987 Online Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product C1988 Integrated Regulator for LPG Applications 1 No. 1. Zinc Ingot 1.10 Kg/Kg content in the export product 2. Brass Scrap 1.075 Kg/Kg content in the export product 3. Pressure Gauge Net to Net 4. O-ring Net to Net 5. QCC Type I Connector Net to Net C1989 Brass Retrofit Adaptor for LPG Applications 1 No. 1. Brass Scr ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
