9911796707
TMI BlogEffective rates of customs duty for goods of Chapters 1 to 99X X X X Extracts X X X X X X X X Extracts X X X X ..... 3 of the said Customs Tariff Act, as is in excess of the rate specified in the corresponding entry in column (5) of the said Table, subject to any of the conditions, specified in the Annexure to this notification, the condition No. of which is mentioned in the corresponding entry in column (6) of the said Table: Provided that nothing contained in this notification shall apply to goods specified against serial Nos. 174, 175, 176, 177, 178 and 179 of the said Table on or after the 1st day of April, 2000. Explanation. - For the purposes of this notification, the rate specified in column (4) or column (5), is ad valorem rate, unless otherwise specified. TABLE S.No. Chapter or heading No. or sub-heading No. Description of goods Standard rate Additional duty rate Condition No. (1) (2) (3) (4) (5) (6) 1. 1 Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pureline poultry stock 5% - - 2. 1 Grand parent poultry stock and Donkey stallions 25% - - 3. 5 Pancreas Nil - - 4. 5 or any other Chapter (1) The following goods, namely :- Frozen semen; Nil Nil - (2) Frozen semen equipment, namely :- (a) liquid nitrogen cont- ainers, flas ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 12% 5% - - 27. 2707.99 Carbon black feedstock 25% - - 28. 27.10 Kerosene, that is to say, any hydrocarbon oil (excluding mineral colza oil and white spirit) which has a smoke point of 18 mm or more (determined) in the apparatus known as the smoke point lamp in the manner indicated in the Bureau of Indian Standards specification ISI : 1448(P.31)-1968 as in force for the time being) and is ordinarily used as an illuminant in oil burning lamps, and imported by the Indian Oil Corporation Limited for ultimate sale through the Public Distribution System Nil - - 29. 27 N-Paraffin imported for use in the maufacture of Linear Alkyl Benzene 20% - 5 30. 27.10 Naphtha 5% - - 31. 27.10 or 2714.90 All goods, for the manufacture of fertilisers Nil Nil 5 32. 2711.11 Liquified natural gas 5% - - 33. 2711.11 or 2714.90 All goods, for the purpose of power generation - Nil - 34. 28 or 29 Chemicals for use in the manufacture of Centchroman Nil - - 35. 2801.20 Iodine for manufacture of Potassium Iodate - 8% 5 36. 28 The following goods :- 15% - - (i) Radium and its salts; (ii) Radioactive isotopes of iodine, phosphorus, cobalt, caesium a ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 3 of the Essential Commodities Act, 1955 (10 of 1955) 25% - - 50. 28, 29, 30 or 38 The following goods, namely :- (A) Life saving drugs/ medicines including their salts and esters and diagnostic test kits specified in List 2 Nil Nil - (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A) above Nil - 5 (C) Other life saving drugs or medicines Nil Nil 7 51. 29 Maltol, if imported for use in the manufacture of Deferiprone Nil - 5 52. 30 Homeopathic medicines 25% - - 53. 30 Medicaments containing spirit - Nil - 54. 3102.10 Urea, for use as manure 5% - - 55. 31 Kyanite salts, in a form indicative of their use for manurial purpose 5% - - 56. 31 Muriate of potash, for use as manure or for the production of complex fertilisers 5% - - 57. 31 Ammonium phosphate or ammonium nitro-phosphate, for use as manure or for the production of complex fertilisers 5% - - 58. 3105.30 Diammonium phosphate, for use as manure or for the production of complex fertilisers 5% - - 59. 3104.30 Potassium sulphate, containing not more than 52% by weight of K2O 5% - - 60. 31 Composite fertilisers 5% - - 61. 31 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 54, 56 or 95 The following goods for use in the manufacture of sports goods, namely :- 15% - - (1) Nylon gut falling under Chapter 39, 54 or 56; (2) Willow clefts, ashwood or beechwood falling under Chapter 44; (3) Cork bottoms falling under Chapter 45 or 95 85. 4012.10 Retreaded tyres, of a kind used on aircrafts 3% - - 86. 41 Wet blue chrome tanned leather, crust leather, finished leather of all kinds, including splits and sides of the aforesaid Nil - - 87. 47 Wood pulp (excluding rayon grade wood pulp) derived by mechanical or chemical means from any fibrous vegetable material Nil - 13 88. 47.07 All goods - Nil - 89. 48 Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectangular pouches containing sodium meta-bi-sulphite, with kraft paper pasted thereto or a single paper coated with sodium meta-bi-sulphite, and which is used for the purpose of preventing fungal decay and thus helps prolonged storage in fresh condition, imported for use in the packing of grapes Nil Nil - 90. 48.01 Newsprint, having an ash content by weight not e ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... synthetic, in dust or in powder form 25% - - 114. 71 (i) Raw pearls, other than cultured pearls; (ii) Rubies, emeralds and sapphires, unset and imported uncut; (iii) Rough diamonds; (iv) Current coins of the Government of India Nil Nil - 115. 71 Raw cultured pearls (including admixtures of pearls containing raw real pearls and cultured pearls) Nil - - 116. 71 Rough semi-precious stones Nil - - 117. 71 Ash and residues containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal 15% - - 118. 71 Foreign currency coins when imported into India by a Scheduled bank Nil Nil 16 119. 71.04 Rough synthetic stones 15% - - 120. 72 Hot rolled stainless steel coils 25% - - 121. 72 Tin mill black plate (TMBP) coils, for the manufacture of tin plates only 25% - - 122. 72.01 Pig iron 15% - - 123. 7202.60 Ferro-nickel 5% - - 124. 72.03 Hot briquetted iron (HBI) and sponge iron, imported by or on behalf of an electric arc furnace unit or induction furnace unit 25% - - 125. 72.04 Melting scrap of iron or steel (other than stainless steel or heat resisting steel), for use in ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nts, (d) Sensors, (e) Brake hydraulics, (f) Flexible coupling, (g) Brake calipers, (h) Wind turbine controllers, (i) Parts of the goods specified at (a) to (h) above. (iii) Blades for rotor of wind operated electricity generators, for manufacture of wind operated electricity generators (iv) Parts and raw materials for manufacture of blades for rotor of wind operated electricity generators 141. Any Chapter Goods required for, - (a) the substitution of ozone depleting substances (ODS); Nil Nil 23 (b) the setting up of new capacity with non-ODS technology. Explanation : "Goods", for the purpose of this exemption means goods which are designed exclusively for non-ODS technology. 142. Any Chapter (A) Machinery, instruments, apparatus and appliances, as well as parts (whether finished or not) or raw materials for the manufacture of aforesaid items and their parts, required for renovation or modernisation of a fertiliser plant; and 5% 10% 24 (B) Spare parts, other raw materials (including semi- finished material) or consumables stores, essential for maintenance of the fertiliser plant mentioned above. 143. 84 Spinnerettes made, inter alia of Gold, Platinum and Rhodium o ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... or use in air-conditioning and refrigeration equipment; (2) parts of compressors specified at (1) above 157. 8418.99 All goods, other than parts of goods falling under sub-heading Nos. 8418.10, 8418.21, 8418.22 or 8418.29 25% - - 158. 84.21 Catalytic convertors 5% - - 159. Any Chapter Parts of catalytic convertors, for manufacture of catalytic convertors 5% - 5 160. Any Chapter The following goods for manufacture of catalytic convertors and their parts, namely :- 5% - 5 (a) Palladium (b) Rhodium (c) Raw Substrate (ceramic) (d) Raw Substrate (metal) (e) Noble Metal Solution 161. 8422.90 All goods, other than parts of dish washing machines 25% - - 162. 84.48 All goods, other than parts of goods falling under sub-heading No. 8447.20 25% - - 163. 8450.90 Parts of goods falling under sub-heading No. 8450.20 35% - - 164. 8451.90 All goods, other than parts of dry-cleaning machines 25% - - 165. 8479.50, 8479.89 Machinery for production of commodities 25% - - 166. 84 or any other Chapter Goods specified in List 8 required for use in a Green House 25% - 28 167. 84 or any other Chapter Goods specified in List 26 required fo ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... o be supplied in connection with the purposes of off-shore oil exploration or exploitation Nil Nil 35 184. 84 of any other Chapter Goods specified in List 11 required in connection with petroleum operations undertaken under specified contracts Nil Nil 36 185. 84 or any other Chapter Goods specified in List 11 required in connection with petroleum operations undertaken under specified contracts under the New Exploration Licensing Policy Nil Nil 80 186. 68, 82 or 84 Moulds (including chases for the manufacture of semi-conductor devices), tools (excluding tungsten carbide micro PCB drills) and dies, for the manufacture of electronic parts 25% - 38 187. 84, 85 or 90 The goods specified in List 12, for the manufacture of goods falling under heading Nos. 85.41 or 85.42 15% - - 188. 29, 30, 34, 37, 38, 39, 69, 84, 85, 90 or 94 (A) Medical equipment (excluding foley balloon catheter) specified in List 13; 15% - - (B) Parts, for the manufacture of goods at (A) above and spare parts, required for the maintenance of the goods at (A) above. 15% - 39 189. 8472.90 Automatic teller machines 25% - - 190. 8473.10 Printed circuit assemblies of word proce ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... using, having a frequency range of 300 Hz to 3, 4 KHz with a diameter of not exceeding 50 mm for telecommunication use, other than cone type 25% - - 210. 8518.30 Line telephone handsets 25% - - 211. 8518.90 Printed circuit assemblies for - 20% - - (i) microphones having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 10 mm. and a height not exceeding 3 mm. for telecommunication use; (ii) loud-speakers, without housing, having a frequency range of 300 Hz to 3, 4 KHz with a diameter not exceeding 50 mm. for telecommunication use; or (iii) line telephone handsets. 212. 8522.90 Printed circuit assemblies for telephone answering machines 25% - - 213. 8527.90 Portable receivers for calling, alerting or paging 25% - - 214. 8529.10 Aerials or antennae of a kind used with apparatus for radio-telephony and radio-telegraphy 20% - - 215. 8529.90 Parts of - 20% - - (i) transmission apparatus other than apparatus for radio-broadcasting or television transmission apparatus incorporating reception apparatus; (ii) digital still image video cameras; or (iii) portable receivers for calling, alerting or paging 216. 8531.80 Flat ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ital still image video cameras 25% - - 231. 49 or 85.24 The following goods, namely :- (i) Information Technology software, and Nil - - (ii) Document of title conveying the right to use Information Technology software. Explanation. -"Information Technology software" means any representation of instructions, data, sound or image including source code and object code, recorded in a machine readable form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine. 232. 85 Compact Disc-Read Only Memory (CD-ROM) 5% - - 233. 85 Floppy diskette 20% - - 234. 8540.11 All goods other than colour television picture tubes 25% - - 235. 85 or any other Chapter The wireless apparatus, accessories and parts specified in List 17, imported by a licensed amateur radio operator 5% - 46 236. 85 or any other Chapter Parts, sub-assemblies, SKD kits, CKD kits of Approach Surveillance Radar (ASR) and Mode-S Monopulse Secondary Surveillance Radar (MSSR) and spares for maintenance of such equipment, required for the modernisation of airport facilities 25% - 47 237. 85 or any other Chapter The following ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... e of goods falling under heading Nos. 89.01, 89.02, 89.04, 89.05 (except 8905.20) or 89.06, in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962) Nil Nil 58 252. Any Chapter Parts, for repair of dredgers Nil Nil - 253. 29, 32, 39, 70 or 90 28, The following goods, namely :- 5 (A) Goods specified in List 18, for the manufacture of telecommunication grade optical fibres or optical fibre cables; 15% - (B) Fibre reinforced plastic rods (FRP), for the manufacture of telecommunication grade optical fibres or optical fibre cables; 25% - (C) Goods specified in List 19, for manufacture of tele-communication grade FRP. 5% - 254. 70 or 90 Perform of Silica for the manufacture of tele- communication grade optical fibres or optical fibre cables 25% - 5 255. 90.01 Optical fibre, for the manufacture of telecommunication grade optical fibre cables 25% - 5 256. 9013.80 Liquid crystal devices 15% - - 257 9013.90 Parts and accessories of Liquid crystal devices 15% - - 258. 9017.10 or 9017.20 Drafting or drawing machines 20% - - 259. 90.22 X-Ray Baggage Inspection Systems and parts thereof Nil - 37 260. 9027 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r the manufacture of medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above Nil Nil 39 275. 90 or any other Chapter The goods, namely following :- (A) Medical equipment specified in List 23; Nil - - (B) Accessories of the medical equipment at (A) above; Nil - - (C) Parts required for the manufacture of the medical equipment at (A) above and spare parts required for the maintenance of the medical equipment at (A) above Nil - 39 276. 90 or any other Chapter Goods for Tubal Occlusion specified in List 24 Nil Nil - 277. 3506.99, 3901.10, 3902.10, 7220.90, 7304.90, 7306.40 or 7306.90 The following goods for the manufacture of syringes and needles falling under heading No. 90.18, namely :- (1) Adhesive epoxy grade falling under sub-heading No. 3506.99; (2) Low density polyethylene falling under sub-heading No. 3901.10; 15% - 5 (3) Polypropylene falling under sub-heading No. 3902.10; (4) Stainless steel strip falling under sub-heading No. 7220.90; (5) Stainless steel capillary tube falling under sub-heading Nos. 7304.90, 7306.40 or 7306.90 278. 90 or any other Chapter Goods specified in List 2 ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... rcels, packets and letters, the duty payable on which is not more than one hundred rupees Nil Nil - 293. Any Chapter Archaeological specimens, photographs, plaster casts or antiquities, intended for exhibition for public benefit in a museum managed by the Archaeological Survey of India or by a State Government Nil Nil 72 294. or 56.01, 96.06 96.07 Fasteners and poly wadding materials Nil Nil 81 295. 99 All goods - Nil - 296. Any Chapter Artificial Plasma 5% Nil - ANNEXURE Condition No. Conditions 1 If the importer gives a declaration that such material is for the purposes of sowing or planting only. 2 If, - (a) import is made under a licence issued under Section J of Part - II of Chapter 15 of the Export and Import Policy 1st April 1997 - 31st March, 2002; (b) the importer at the time of clearance, furnishes a certificate, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Tourism to the effect that the goods imported are essential goods related to hotel and tourism industry and that the hotel or restaurant importing such goods is approved by that Ministry. 3 If the goods are donated as ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mation and Broadcasting that the films and video cassettes are intended for archival study, or record and reference purposes. 12 If, - (a) imported for the manufacture of Copper-T Contraceptives; and (b) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 13 If, - (a) the wood pulp is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper; and (c) the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. Explanation. - For the purpose of this condition, "newspaper" means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867). 14 If at the time of importation, the importer, - (1) in all cases [excluding the case of the goods at item No. 9 of List 3 (B)], produces a valid registration-cum-membership certificate issued by the Council for ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ndertaking) Act, 1970 (5 of 1970) or any other bank, being a bank included in the Second Schedule to the Reserve Bank of India Act, 1934 (2 of 1934). 17 If, - (a) the importer furnishes an undertaking to the Assistant Commissioner of Customs that such melting scrap will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said scrap as is not proved to have been so used, an amount equal to the difference between the duty leviable on such quantity but for the exemption under this notification and that already paid at the time of importation; and (b) the importer produces to the said Additional Commissioner, within six months or such extended period, as that Assistant Commissioner may allow, a certificate issued by the Assistant Commissioner of Central Excise in whose jurisdiction the said melting scrap of iron and steel has been used in electric arc furnace or induction furnace or melting in a hot blast cupola, that the said melting scrap has been so used. 18 If the re-rollable scrap consists of seconds and defectives or cuttings/rejected ingots/slabs/blooms/ billets, bars ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ds have been used for the purpose specified. 22 If the importer at the time of importation, - (A) furnishes in all cases a certificate to the Assistant Commissioner of Customs, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Non-Conventional Energy Sources recommending the grant of this exemption and in the case of the goods at (ii) to (iv) in column (3) of the Table to this notification, the said officer certifies that the goods are required for the specified purposes; and (B) furnishes an undertaking to the said Assistant Commissioner to the effect that, - (a) in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he shall not sell or otherwise dispose off, in any manner, such generators or chargers for a period of two years from the date of importation; (b) in the case of other goods specified at (ii) to (iv) in column (3) of the said Table, he shall use them for the specified purpose; and (c) in case he fails to comply with sub-conditions (a) or (b), or both conditions, as the case may be, he shall pay an amount equal to the difference between the duty leviable on ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... mported, within one year of the date of exportation of spinnerettes out of India; and (2) no drawback of duty has been paid on the occasion of their export. Explanation. - On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal to - (i) the cost of such exchange, that is to say, the aggregate of - (a) labour charges; (b) price charged for that quantity of gold, platinum and rhodium, if any, which is in excess of the respective quantity of gold, platinum or rhodium contained in the said spinnerettes exported out of India; and (c) any other charges paid by the importer to the supplier of such spinnerettes for such exchange of spinnerettes; and (ii) the insurance and freight charges, both ways. 26 If, - (A) imported by a State Fisheries Corporation or any Fisheries Co-operative Federation recognised by the State Government; or (B) imported by a person other than a State Fisheries Corporation or any fisheries Co-operative Federation recognised by the State Government concerned, - (i) the importer produces a certificate, from an officer not below the rank of a Deputy Secretary of the Department conc ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Ministry; and (b) produces evidence to the satisfaction of the Assistant Commissioner of Customs within two years from the date of importation or within such extended period as the said Assistant Commissioner may allow, to the effect that the goods have been actually used for the purpose specified at (a) above. 32 If, - (i) in the case of a power plant (except a nuclear power plant),- (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernisation, as the case may be, of such power plant, has been approved and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity rec ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... case, the grant of the aforesaid exemption to the goods for such scheme; (ii) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; and (d) in all cases, the importer furnishes an undertaking to the Assistant Commissioner of Customs to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 34 If, - (a) the goods are imported by the Oil and Natural Gas Corporation or Oil India Limite ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the purposes of off-shore oil exploration or exploitation. 36 If, - (a) the goods are imported by an Indian Company or Companies, a Foreign Company or Companies, or a consortium of an Indian Company or Companies and a Foreign Company or Companies (hereinafter referred to as the "contractor") or a sub-contractor of the contractor and in each case in connection with petroleum operations to be undertaken under a contract with the Government of India; (b) where the importer is a contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely :- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported under the contract referred to in that clause, and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign excha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... to the effect that the said goods are intended for the aforesaid use. 38 If the importer produces a certificate from an officer not below the rank of a Joint Director in the Department of Electronics, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption. 39 If the importer furnishes an undertaking to the Assistant Commissioner of Customs, to the effect that - (a) the parts, or as the case may be, the spare parts shall be used for the manufacture or maintenance, as the case may be, of the specified medical equipment; (b) he shall, within three months or such extended period that the said Assistant Commissioner may allow, produce - (i) in the case of parts, a certificate from the Assistant Commissioner of Central Excise having jurisdiction over the factory manufacturing the specified medical equipment, to the effect that the parts have been used in the manufacture of the specified medical equipment; or (ii) in the case of spare parts, necessary evidence to the satisfaction of the Assistant Commission ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... is failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification and that already paid at the time of importation. 43 If the importer produces to the Assistant Commissioner of Customs at the time and place of importation, - (i) a certificate issued by an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited news agency; and (ii) an undertaking to the effect that the imported goods shall remain in the possession, control and use of the agency and shall not be sold or parted with for a period of five years from the date of importation. 44 If, - (a) the goods are imported by a newspaper establishment registered with the Registrar of Newspapers for India appointed under Section 19A of the Press and Registration of Books Act, 1867 (25 of 1867); and (b) the importer at the time of import produces before the Assistant Commissioner of Customs - (1) a certificate issued by the Registrar of Newspapers f ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... viation that the imported goods are required to be used for the modernisation of airport facilities and recommends the grant of this exemption. 48 If the importer, at the time of importation furnishes an undertaking to the Assistant Commissioner of Customs to the effect that, - (a) the imported goods shall be used for the specified purposes and shall not be sold or otherwise disposed off in any manner for a period of at least two years from the date of importation; and (b) in the event of failure to comply with (a) above, he shall be liable to pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 49 If in the case of imports, - (1) for the Teleteach or Margdarshan Programme, the Managing Director of M/s. Electronic Trade and Technology Development Corporation Limited, certifies that the said cassettes and tapes are predominantly educational in character and the importer furnishes an undertaking to the effect that - (i) the certificate from the Central Board of Film Certification in the Form below, shall be produced within a period of three months ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the goods are imported for being tested in - (a) Defence Research and Development Organisation (DRDO) laboratories; (b) Indian Institutes of Technology; (c) Council for Scientific and Industrial Research (CSIR) laboratories; (d) Central Power Research Institute, Bangalore; or (e) Any other test centre approved by any Ministry in the Government of India for this purpose; and (2) the Head of any of the organisations specified above certifies that the goods have been imported by that organisation only for the purpose of testing and shall not be used or sold after such testing. 52 If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing Public Mobile Radio Trunked Service (PMRTS). 53 If the parts are required for manufacture or servicing of aeroplanes, gliders, helicopters, or simulators of aircraft. Explanation. - "Parts of aeroplanes, gliders, helicopters or simulators of aircraft" shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts. 54 If an officer not below the rank of a Deputy Secreta ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged material or the like; (b) war ships of all kinds including submarines; (c) tugs, dredgers, fire-floats and salvage ships; and (d) oil rigs, drilling ships and jack-up rigs. 57 If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 ( 52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods. 58 If any of the goods manufactured from the imported raw materials and parts, are subsequently intended to be broken up, a bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and t ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... gives an undertaking to the Assistant Commissioner of Customs at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation. 61 If, - (a) imported by any Department or Ministry of the Government of India; and (b) the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the concerned Department or Ministry, certifying that the said goods are being imported under an agreement relating to Government to Government Assistance Programme with any other country. 62 If an officer not below the rank of a Deputy Secretary in the Department of Animal Husbandry and Dairying in the Ministry of Agriculture, Government of India, is satisfied that the imported goods are required for the purpose of live-stock breeding programmes and certifies to this effect and recommends grant of the exemption. 63 If the spare parts are, - (a) essential for the working of hearing aids and have been given for that purpose some special shape or quality which would not be essential for use for an ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the Civil Surgeon or the District Medical Officer or the Administrative Medical Officer or the Director of Health Services of the concerned State or a Specialist in the concerned speciality attached to a Government Hospital or a recognised medical college to the effect that the importer suffers from the particular handicap or disability and that the imported goods in respect of which the exemption is claimed are essential to overcome the said handicap or disability. 67 If certified by the apex body in relation to the concerned game or sport (the highest organisation, other than Government, by which the game or sport is controlled or regulated), that the requisites for games and sports are required to be used in a national or international championship or competition to be held in India or abroad. 68 If, - (a) the synthetic tracks and artificial surfaces and equipment required for their installation are imported under the "Scheme for Laying Synthetic Tracks and Artificial Surfaces" of the Department of Youth Affairs and Sports, Government of India; (b) the importer, at the time of import - (1) produces before the Assistant Commissioner of Customs a certificate from an office ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... the time of import - (i) produces before the Assistant Commissioner of Customs a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Space certifying that the said satellites and pay-loads are for launch by Indian launch vehicles from Indian soil into Outer Space in conformity with the provisions of the Outer Space Treaty of 1967; and (ii) gives an undertaking to the effect that the ground equipment imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Assistant Commissioner of Customs may allow, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 74 If the importer furnishes an undertaking to the Assistant Commissioner of Customs that the coin blanks shall be used only for the purpose of coining of coins in a Mint of the Government of India. 75 If, - (a) the goods are imported by- (i) the Ministry of Surface ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... of Customs, at the time of importation, the following, namely, - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbon, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for such petroleum operations and have been imported under a contract signed under the New Exploration Licensing Policy; and (ii) a certificate, in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the imports of such goods undertaken by the Foreign Company or Companies; (c) where the importer is a sub-contractor, he produces to the Assistant Commissioner of Customs, at the time of importation, the following, namely, - (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbon, in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in clause (a) and have been imported ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... (22) Ovaprim [gonadotropin releasing hormones] (GnRH) analogue with domperidone (23) Pleuromutilin (24) Pregnant mare serum (PMSG) (25) Prostaglandin F2 alpha (26) Prostaglandin (27) Prostaglandins (PgF2 alpha) (28) Robenidin HCL (29) Tiamulin hydrogen Fumarate (30) Tiamulin hydrochloride (31) Tylan premix (32) Tylosin tartarate/tylosin phosphate (33) Vaccine for fish (34) Virginiamycin (35) 4-hexyl resorcinol LIST 2 (See S. No. 50 and 289 of the Table) (1) 32 P Sodium Phosphate (2) Flucytosin (3) 5-Fluorouracil (4) 6-Isoguanine (5) Aclarubicin, (6) Dactinomycin (7) Doxorubicin, (8) Agglutinating Sera (9) Allopurinol, (10) Ambenonium Chloride, (11) Amikacin, (12) Amino - glutothemide, (13) Amiodarone, (14) Amiphenazole, (15) Amphotericin-B, (16) Amrinone, (17) Amsacrine, (18) Amy lobarbitone Sodium, (19) Anti-Diphtheria Normal Human Immunoglobulin, (20) Anti Haeomophilic Factor concentrate (VIII and IX), (21) Anti-Human Lymophocyte Immunoglobulin IV (22) Anti-human thymocyte immunoglobulin IV, (23) Anti-Pertussis Normal Human Immunoglobulin (24) Anti-Plague serum, (25) Anti-Pseudomonas Normal Human Immunoglobulin, (26) Anti-Rabies Normal Human Immunoglobulin (27) Aprotinin, (28) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d C combined vaccine with diluant solvent, (115) Melphalan, (116) Mercaptopurine, (117) Mesna, (118) Methisazone, (119) Methicillin, (120) Methoxy isobutyl Isonitrile, (121) Methotrexate, (122) Methyl prednisolone, (123) Methoxyflurane, (124) Metrizamide Inj with diluant, (125) Metraminol, (126) Mithramycin, (127) Nimustine, (128) Mitotane, (129) Mitomycin, (130) MMR (Measles, mumps and rubella) vaccine, (131) Latamoxef, (132) Monocomponent insulins, (133) Nalorphine, (134) Mustin Hydrochloride, (135) Netilmicin, (136) Naloxone, (137) Nitroglycerine, (138) Normal human plasma, (139) Normal human immunoglobulin, (140) Nuclear magnetic resonance contrast agent, (141) Normal human serum Albumin, (142) Penicillamine, (143) Pancuronium Bromide, (144) Pentamidine, (145) Penicillinase, (146) Peplomycin, (147) Pilocarpine, (148) Podopyllotoxin, (149) Piperacillin, (150) Poliomyelitis vaccine (inactivated and live), (151) Laureth 9, (152) Polymyxin B, (153) Polyestradiol, (154) Potassium Aminobenzoate, (155) Porcine Insulin Zinc Suspension, (156) Praziquantel, (157) Pralidoxime, (158) Prednimustine, (159) Prazosin, (160) Porcine and Bovine insulin, (161) Procarbazine, (162) Purified Chick E ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... stic kits, (229) Lamivudine, (230) Zalcitabine, (231) Saquinavir, (232) Zidovudine,(233) Ritonavir, (234) Amifostine, (235) Gemcitabine, (236) Goserlin Acetate, (237) Teicoplanin, (238) Recuronium Bromide, (239) Abeciximab, (240) Disodium Pamidronate LIST 3(A) (See S. No. 110 of the Table) PARTS, CONSUMABLES AND OTHER ITEMS (1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift (2) Toe caps and counters for leather footwear (3) Insoles or midsoles and sheets therefor (4) Welts made from leather or plastic (5) Shoes eyelets (6) Felt sleeves (7) Heel tips (8) Unit soles with or without heels (9) Stamping wheels (10) Patterns for leather footwear (11) Plastic or nylon tipped hammers (12) Plastic, PVC or nylon lasts with or without steel hinges (13) Clicking boards for leather machinery (14) Harness needles for hand sewing pre-punched cards (15) Pre-punched cards (16) Leather designers kit, namely, designers knife, shoe measuring tape, designers tape and satra vacuum former (17) Industrial sewing machine needles with leather point (18) Bell skiving knives (19) Band knife for splitting machines (20) Cutting and clicking die ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... , 80 or 90 (53) Solvent soluble dye Acid Yellow of Hue Nos. 96, 99, 194, 204, 220 or 243 (54) Solvent soluble dye Direct Orange of Hue No. 61 (55) Solvent soluble dye Direct Brown of Hue No. 94 or 209 (56) Solvent soluble dye Direct Violet of Hue No. 46 (57) Solvent soluble dye Direct Black of Hue No. 120 or 155 and (58) Solvent soluble dye Direct Green of Hue No. 66 LIST 3(B) (See S.No. 110 of the Table) OTHER PARTS, CONSUMABLES AND ITEMS (1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents (2) Penetrators (3) Stamping foil in strips of width not exceeding 6 inches (4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckels, metal frames, tacks and washers (5) Buttons, press-fasteners and snap-fasteners falling under Heading No. 96.06 (6) Magnetic buttons (7) Abrasive sheets falling under sub-heading No. 6805.20 (8) Shanks and welts falling under Heading Nos. 73.26 and 64.06 respectively ( ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... diameter 0.1 mm. to 1.5 mm. (17) Brass flats of thickness upto 6.5 mm., width upto 50 mm. and length upto 2000 mm. (18) Brass rods of diameter upto 36.5 mm. (19) Nickel silver rods of diameter upto 3 mm. and length upto 3000 mm. (20) Leaded brass pipes of outer diameter 18 mm. to 35 mm., and inner diameter 10 mm. to 30 mm. (21) Stainless steel flats, cold rolled or hot rolled for manufacture of watch case bezels of thickness 2.5 mm. to 10 mm. and width upto 55 mm. (22) Cold rolled stainless steel strips for the manufacture of watch back covers and bezel rings of thickness 0.4 mm. to 3.0 mm. for back cover and 1.2 mm. to 5.0 mm. for bezel rings and width upto 55 mm. for both (23) Unleaded brass strips of thickness 0.07 mm. to 1.5 mm. and width 5 mm. to 50 mm. (24) Phosphor Bronze strips in coils of thickness 0.125 mm. and width 28 mm. (25) Lacquers and varnishes (26) Brass circles of thickness 0.4 mm. to 0.5 mm. and diameter 24 mm. to 50 mm. (27) Brass for making appliques/indexes/logos/windows with 2 feet, of thickness 0.3 mm. to 2 mm. and width 1 mm. to 4 mm. (28) Nickel silver circles of thickness 0.5 mm. and below and diameter 24 mm. to 50 mm. (29) Tritium activated zinc sulphi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cuum filter, gas scrubber, for phosphogypsum (viii) Flash calciner (ix) centrifuge for calcination equipment (x) Partition panel plant (xi) Moulds for phosphogypsum (xii) Drier-cum-calciner (xiii) Edge Runner Mill (for crushing and kneading of Clay and Flyash Mixture output 15 to 40 tons per hour depending on the perforation of the grinding plates) (xiv) Pan Mixer (output 25 tons per hour) (xv) Double Shaft Mixer (for mixing of the material consisting of Clay and Flyash) (xvi) Vacuum Worm Press Extrusion machine (capacity of the press upto 36 tons of material per hour) (xvii) Mouth piece (for the above vacuum Worm Press with dimensions corresponding to the required type of Bricks or Blocks which will be produced) (xviii) Automatic Equipment (for cutting and handling of bricks between the pressing shop and dryers) (xix) Plant and machinery required for making hollow-core roofing/flooring units (xx) Large-size plants for manufacturing of hollow and solid concrete blocks for walling (xxi) Mechanised hydraulically operated Tunnel Form of Wall forms, Slabforms, Column forms (xxii) Large-size vibrating-beds with integrated curing and wire-tensioning arrangements (xxiii) Vibrating-distrib ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ic inserting machine on variety of garments (59) Electrical machine for cutting and slanting straps (60) Electro pneumatic weaving machine for leather (61) Electronic skin assessor (62) Embossing plates for press for leather printing (63) Engraved rollers for Press for leather printing (64) Evening and Roughing machine for Soles and Insolses (65) Fibre Board Flexing machine (66) Fine Turn machines for Lasts (67) Finish Sheet Resistance Tester (68) Finishing Machine for Lasts (69) Fixed Head/Travailing Head Clicking Cutting machine (70) Flat Bed Double Needle Sewing machine (71) Flat Bed Single Needle Industrial Sewing machine with or without trimmer (72) Folding machine for brief cases and other leather products (73) Folding machine for sides for Brief Case (74) Forepart conditioning machine (75) Frame Fixing/Frame Folding machine (76) Fusing presses (77) Halogen and Adhesive Application machine (78) Hand Operated Press for Inserting Perforation Tubes and prickers (79) Heat Setting plant (80) Heat transfer press (81) Heel and Sole Brushing machine (82) Heel and Sole Buffing machine (83) Heel Attaching machine (84) Heel Breast Cementing machine (85) Heel breast roughing machine (86) ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ishment fixing machine (152) Plan Computer Controlled Nesting System (153) Pneumatic Broaching machine (154) Pneumatic control moulder machine for buckles (155) Pneumatic fusing machine for ironing fusible interlining (156) Polishing machine (157) Polyshanking machine (158) Polyurethane/PVC/TPR Sole Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station) (159) Pore part lasting machine (160) Post Bed Double Needle Sewing machine (161) Post Bed Single Needle Sewing machine, (162) Post Bed Single Needle under Edge Trimming (163) Pounding or beating or ironing machine or combination of such machines (164) Pre-lasting conditioner (165) Preparing and polishing machine (166) Pulling Over and Cement Lasting machine (167) Pulling Over Machine (168) Punches for model room (169) Punches of all varieties (170) Punching and/or eyeletting machine (171) PVC/PU direct injection soling machine (DPI construction) (172) Quilting machine (173) Raised Cord Sewing machine (174) Reactivating Plant for Shoe and Soles (175) Recessing and Roughing Soles machine (176) Recessing Welt machine (177) Rotary Collection Unit (178) Rotary Pigment Coating machine (179) Rotary Printing machin ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... sole backparts stiffness tester, shoe flexing machine, Break/pipness scale, Sole Adhesion tester, Safety Footwear impact tester, Rapid tear tester, Needle holding jig, Shoe lace adhesion machine (225) Thermo cementing and folding machine (226) Toe Cap Applicator Thermoplastic (227) Top Lift Slugging machine (228) Transfer Arm (229) Trimming/milling machine with or without polishing device (230) Twin Needle, needle feedlock stitch sewing machine (231) Twin Sole Attaching machine (232) Two Needle Lock Stitching machine (233) Unlasting machine (234) Upper Cementing machine (235) Upper Edge Inking machine (236) Upper Embossing machine (237) Upper Folding machine (238) Upper Forming machine (239) Upper Perforating machine (240) Upper Reinforcing machine (241) Upper Seam Rubbing/Beating machine (242) Vacuum Drying machine (243) Vacuum forming machine for last with vacuum pump (244) Vice for holding pattern (245) Vision Lasting System for Toe Lasting machine (246) Vulcanizing Press (247) Welt (Rand) Attaching machine (248) Aquamix for use in Tanning industry (249) Prodomix for use in Tanning industry (250) Microtan / Computan for use in Tanning industry (251) Pneumatic press for engraving ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... d washing machine (26) Conveyor table (27) Bread - Slicing Machine (28) Roll-in-Refrigeration (Absorption type) or Mini Bars (29) Baking ovens - gas fired (30) Ice cubes machines over 1000 lbs. capacity (31) Potato peelers (32) Potato chipper (33) Coffee machine (34) Dish washing machine (35) Glass washing machine (36) Luckon hot plate (37) Plate dispenser (38) Toaster - Conveyor type (39) Tilting frying table/pans (40) Tilting boiling pan (41) Croissant machine (42) Deck oven, Pizza oven, Convection oven and Rotating ovens, for baking (43) Microwave ovens (44) Banquet Trolleys (Refrigerated) (45) Cocktail mixer/beverage mixer (46) Juice dispenser (47) Walk - in Coolers and Freezers (48) Gas Ranges with ovens/flame failure device (49) High pressure hot water cleaning jets (50) Puree machines (51) Deep fat frier with thermostatic control (gas operated) (52) Deep fat frier with thermostatic control (electrically operated) (53) Vegetable cutting/dicing machine (54) Energy saving steam cooker (double / quadruple type) (55) Hamburger machine, pastry rollers and noodle makers (56) Chocolate coating units (57) Pastamatic machines (58) Cold cut Slicer (59) Sausage making machine (60) Waste ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ries - complete set (117) Fireman suit. (118) Electronic liquid level indicator (119) Hand Driers (120) Garbage compactizer (121) Bottle Crusher (122) Sauna Heaters and Saunas VII. Front Office Equipment : (123) Electric locking system (124) Key cutting machine (125) Computerised electronic vaults LIST 10 (See S. Nos. 180 and 181 of the Table) (1) Singeing machine (2) Yarn/Fabric mercerising machine (3) Continuous bleaching plant (4) Fabric reversing machine (5) Fabric dyeing machine complete with dye kitchen & accessories (6) Wet fabric spreading and squeezing machine (7) Relax drum/conveyer drying machine (i) Drying range (ii) Float dryers (iii) Loop dryers (iv) Drum dryers (v) Jet dryers (vi) Rapid dryers (8) Compacting Machine (9) HTHP Hosiery yarn dyeing machine complete with dye kitchen and accessories (10) Soft package winders (dye package winders) (11) Yarn drying machine (12) Automatic dye weighing and dispensing machine (13) Volumetric/Gravimetric measurement liquid chemical station (14) Open width Tubular inspection machine (15) Lab dye preparation machine (16) Fastness testing equipment (17) Shrinkage testing equipment (18) Lab infra Red Drying Machine (19) Indigo dye ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... itting/gloves knitting machine. (63) Whole garment making machine (knitted) (64) Plain stitching machine with more than 3500 stitches per minute (65) Computerised plain stitching machine with more than 3500 stitches per minute (66) High speed needle feed two needle flat bed industrial sewing machine (67) Sewing machine zig-zig flat bed (68) High speed multiple needle sewing machine (69) Class feed of the arm industrial sewing machine (70) Bottom hole sewing machine (71) Bottom stitch sewing machine (72) Elastic inserting machine (on a variety of garments) (73) Belt attaching machine (74) Zip attaching machine (75) Bar tacking machine (76) Hemstitch machine (77) Smoking machine (78) Computerised pattern maker/pattern grading/marker machine (79) Power driven cloth cutting machine (80) Band knife cutting machine (81) Collar turning and blocking machine and cuff turning and blocking machine (82) Cuff press (83) New automatic collar turning machine (84) Automatic pocket weld sewing machine (85) Pocket creasing machine (86) Embroidery machine with 10 heads and above (87) Computerised embroidery machine (88) Computerised embroidery pattern making machine with plotter (89) Printing and cur ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... machines for viscose filament yarn. (150) Digital electronic frequency inverters for spinning machines including control boards (151) Finishing oil metering pumps with relevant feed system (152) Metering gear pumps for viscose (153) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel (154) Precious metal spinnerettes including distribution plates (prespinnerette) (155) Spin bath degassing plant by flash evaporation (156) Spin bath backwash filtration system with candle filters (157) Continuous dissolving and homogenising system for viscose preparation (158) Contidisk filters for viscose (159) Spinbath heat exchanger in graphite LIST 11 (See S. No. 182, 184 and 185 of the Table) (1) Land seismic survey equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for onshore and offshore activities (2) All types of drilling rigs, jackup rigs, submersible rigs, semi-submersible rigs, drill ships, drilling b ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... used for storage of oil, condensate, water, mud, chemicals and related materials (13) All types of fully equipped vessels and other units/equipment required for pollution control, fire prevention, fire fighting, safety items like Survival Craft, Life Raft, fire and gas detection equipment, including H2S monitoring equipment. (14) Mobile and skid mounted pipe laying, pipe testing and pipe inspection equipment (15) All types of valves including high pressure valves (16) Communication equipment required for Petroleum operations including synthesized VHF Aero and VHF Marine multi channel sets (17) Non directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system (18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment (19) X-band radar transponders, area surveillance system (20) Common depth point (CDP) cable, logging cable, connector, geo-phone strings, perforation equipment and explosives (21) Wellhead and Christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... y cables or plug-in vise (8) Air turbine head/cartridges - borden turbines - regular cartridge, borden turbines - silencer cartridge and quiet air turbines - compact miniature standard (9) Dental burs of all varieties of various shapes and sizes - carbide, diamond or steel (10) Dental hand pieces, for - air motor, air turbine or drilling engines (clinical and laboratory) for filling, packing and condensation purposes and micromotors (11) Endodontic instruments (root canal instruments), brosches, reamers and files, fillers/wideners and pluggers (12) Anaesthetic cartridges for dental use (13) Body contoured self-adjusting electrically operated dental chair (14) Equipment for chrome cobalt work (15) Fibre optic light equipment with attachments for dental work (16) Porcelain furnace (17) Sand blasting equipment for dental use (18) Vacuum investing equipment for dental castings (19) Developing tarks for dental X-ray (automatic and ordinary) (B) Ophthalmic equipment, namely :- (1) Projection magnifier for contact lens inspection and verification (2) Radiuscope base curve (for measurement of contact lenses) (3) Contact lens thickness measuring gauge (4) Stereozoom microscope for inspecti ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... Capnograph-CO2 meter blood gas-CO2 meter gas to gas (52) Oxygen blending mask (53) Paediatric anesthesia set (54) Cautery proof cardioscopes with memory (55) Dosemeter (56) Polystyrene phantoms (57) Water phantom (58) Mould room equipment (including styrofoam gatter) (59) Radiation field analyser (60) Survey equipment (including neutron monitor) (61) Densitometer for film densitometry (62) TLD (for internal dosimetry) (63) Isotope calibrator (64) Whole body human phantom (65) Angioscope for coronary angiography (66) Doppler equipment (67) Xeroradiographic equipment (68) Urological X-ray examination unit (69) Pressure injector with rapid serial changing unit (70) Computerised tread mill (71) Vector cardiograph (72) Polygraph (73) Phonocardiograph and systolic time interval equipment (74) Tonometer (75) Photo-coagulator (76) Lithotome (77) Paediatric resectoscope/audit resectoscope (78) Peritoneoscopes and accessories thereof (79) Extracorporal lithotriper (80) Calibrated thermo compensated/thermostabilised anaesthetic vapouriser (81) Foetal monitor (82) Bipolar coagulator and forceps (83) Electro-encephalography equipment (84) Doppler carotid scanner (85) Electromyography equipment ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... or tetraplegics and paraplegic workers (b) aids for disabled, namely, folding walking frames (c) aids to extend reach to pick up small items (with small magnet pick up) (d) specialised fixtures for orthopaedic and spastic, tetraplegics for manoeuvring and providing dexterity to fingers and wrist (e) turning beds for prevention of pressure sores (f) emulsion cushions for tetraplegics and working paraplegics to avoid pressure sores (122) Multichannel (more than 3 channels) cardiac monitoring system with/without central monitoring unit (123) Hyperthermia machine (124) Polypropylene mesh for hernia repair (125) Dental X-ray machine (126) Digital imaging system for face X-rays (127) Orthopantom ram (O.P.G) X-rays for jaws (128) Jaw surgery equipment - (a) stryker saws (b) special titanium and tungsten carbide drill bits (c) jaw surgery instruments including special retractors, bone holders (129) ECG transtelephonic recorder/transmitter/recorder-cum-transmitter (130) Linear accelerator (131) Precision delivery device used for administration of insulin with penfill cartridges such as Novopen (D) Other goods, namely :- (1) Dental implant (2) Dental cements (3) Impression materials of all ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... te polarisers and Beam splitters (f) ZnSe mirrors, ZnSe lenses and ZnSe windows (g) Gratings and prisms (h) Dye cells and laser dyes (i) Thin film polarisers for visible, near IR region (j) Electro-optic switches for visible, near IR and 10.6 micrometer region (k) Flash lamps (Xenon, Krypton) (l) Arc lamps (Krypton) (m) Second harmonic generation crystals (2) Energy storage capacitors (3) Thyratrons (4) Photodetectors and photomultipliers (5) Metering needle valves and pressure indicators (6) Spectroscopic grade pure gases viz., Xenon, Krypton, Fluorine, Argon (7) Vacuum pumps of capacity upto 20 litres per minute (8) Quartz and Special glasses (9) Non linear crystals (10) Electro-optic and Acousto-optic switches (11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing (12) Optical filters LIST 16 (See S. No. 199 of the Table) (1) Television cameras with portable field video recorders (professional grade) (2) Audio recording equipment (3) Table top post production video editing machines (4) Four source editing controllers to cont ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ster tape (15) Nylon thread (16) Polyethylene cord (17) Biaxilly oriented nylon tape (18) Silica tube/rod, other than preform. LIST 19 (See S. No. 253 of the Table) (1) E-glass yarn/roving for FRP (2) UV resin for FRP (3) Complex high molecular weight resin in acrylate solution for FRP (4) Acrylated monomers (5) Photoinitiater (6) Tert butyl perbenzoate (7) Zinc soap of long fatty acid mixture (8) Modified polypropylene (9) Ethylene acrylic acid (EAA) LIST 20 (See S. No. 264 of the Table) (1) Calorimeter for semen analysis (2) Phase contrast microscope (3) Photometer for semen analysis (4) Ovucheck pregnancy detecting kit (5) Freeze drier (6) Tuberculin syringe (7) Programmed biological freezer (8) Automatic semen analyser (9) Semen straws (French medium and mini) (10) Sheath for French mini straws (11) Cryo containers above 60 litres capacity (12) Liquid nitrogen tankers above 500 litre capacity. LIST 21 (See S. No. 271 of the Table) (1) Australia AntigenRIA kit (2) Cardiac catheters with guidewires (3) Clips for aneurysms and clips applying forceps in Neuro-Surgery (4) Cardio vascular sutures (5) Cardiovascular special instruments, namely:- (i) Coronary perfusion cannulae ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 373 ml; wasting harness with bypass, and waste bags (37) AIDS (Acquired Immune Deficiency Syndrome) test kits; Enhanced luminescene analysers for AIDS, Hepatitis and other Analyses (38) Iridium wire (39) Anti-HLA sera (AB-CDR) (40) T.P.H.A. Kits and AIDS diagnostic kits (41) Gamma knife (42) Bone Marrow Transplant Equipment including silastic long standing intravenous catheters for Chemotherapy (43) Cell Separator (44) Pressure Transducer and Pressure Amplifier (45) Cell Saver (46) Continuous Ambulatory Peritoneal Dialysis Solution Bag with or without tubing system (47) Craniotome (Pneumatic and Electric Equipment) and Drills (48) Binocular Loupes (49) Intra Aortic Balloon Pump (50) Remote After Loading Brachy Therapy Equipment (51) Dosimetry System (52) Cell Saver Equipment (53) Cell Washer (54) Thawer Equipment for Blood Warming (55) Mammography Unit (56) O2 Concentrator (57) Ventricular Assist Device (58) Pace Maker (59) Activated Clot Time Machine (60) Cobalt Therapy Unit (61) Colour Doppler Ultrasound Scanner (62) SPECT Gamma Camera (63) Deep Therapy Unit (64) Cardiac and Vascular Angiography System including Digital Substraction Angiography (65) Pulse Oximeter (66) Blood Gas ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... projection - chart (27) Ophthalmic hydraulic chair (28) Low visual aids and sets (telescopic glasses) (29) Colour vision testing equipment Photoelectric keratoscope and thermokeratoscope (31) Pseudo-isochromatic chart book/ Ishiare (32) Slit lamp biomicroscope/ photo slit lamp (33) Surgical operating zoom microscope with closed circuit TV camera (34) Surgical operating microscope manual (35) Argon/ krypton laser (36) Yag laser, excimer laser or diode laser LIST 23 (See S. No. 275 of the Table) (1) Otoscope (2) Impedance Audiometer (3) BERA (Brain Evoked Response Audiometry) (4) Speech Audiometer (5) Surgical Operating Microscope (6) Fresnel's glasses (7) Magnifying Operating Glasses (Magnifying Loupes) (8) Dental engines, Micro motors, handpieces, ENT Burrs, Steel Burrs, Tungsten Burrs, Carbon Burrs with Titanium coating (9) Microsurgical instruments for all Ear surgeries (10) Sialistic sheet used for Tympanoplasty operations (11) Sinoscopes 00, 300, 700, 1200 (2.6 mm and 4 mm diameter) (12) Instruments for Endoscopic Sinus Surgery (13) CCD Camera, Monitor, VCR to fit with Sinoscopes (14) Cochlear Implants and equipment for performing Cochlear (15) Voice Prostheses (16) Blom Sin ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... , Drawing aids, tactile displays (9) Specially adapted clocks and watches B. (1) Orthopaedic appliances falling under heading No. 90.21 of the First Schedule (2) Wheel chairs falling under heading No. 87.13 of the First Schedule C. Artificial electronic larynx and spares thereof D. Artificial electronic ear (Cochlear implant) LIST 26 (See S. No. 167 of the Table) 1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator); thermal cracking (Delayed Coker, Visbreaker, Flexicoker); catalytic cracking(FCC, Hydrocracker); lube processing (Deasphalting, Dewaxing, Solvent Extraction); hydro-desulphurisation/hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil); alkylation; isomerisation; catalytic reforming; treating (Merox, Amine); recovery (Propylene, Ethylene, Butane); synthesis (MTBE, TAME); gas concentration plant; bitumen blowing; sour water stripping, extraction (Pentane, Hexane, BTX). 2. All types of Hydrogen Generation, Recovery and Purification Plants; Sulphur Recovery Plants including Tail Gas Treatment Units; with associated components and equipments, including reactors (like shift, Claus, hydrotreater, CBA, desulphurizer), fur ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... with drivers, auxiliary seal/lube/control oil systems, instrumentation & control systems. 8. All types of Fired Heaters and Boilers, with radiant coils and sections, transfer line assemblies, convection coils and sections, cross over/jump over pipes, fittings, tube sheets, tube supports, refractory materials, structural steel supports, casings, stacks, dampers, soot blowers, ducting systems, gas/oil/dual burner assemblies, burner tiles, waste heat boilers (WHB), steam generators, economizers, air/fuel preheat systems, FD/ID fans, fuel gas/oil skids; and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters; alongwith associated instrumentation & control systems, including burner lighting, flame detection and burner management systems. 9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors; for gas, air, hydrocarbon and all special services includ ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... All types of Materials Transporting Equipments, including loading & unloading arms and racks; gantries, dispatch tanks, loading/ transfer pumps, hydraulic systems, weigh bridges, Diesel shunters, feed or injection or spray nozzles, skimmers, soot blowers; with instrumentation & control systems, including load cells and metering stations. 17. All types of Electrical Equipments including switchyard equipments, transmitters, relays; solar power systems, including solar panels, batteries and chargers; phase shift monitors, motor or steam turbine generators, protection relays for generators, auxiliary seal/lube/control oil systems, actuators, annunciators, lighting masts, lighting fittings, panels; batteries and battery chargers; bus ducts; all types of cables including power/instrument/compensating/fibre optic/coaxial/control cables; cable joints, capacitors, distribution boards, fittings, substations, grounding/neutral resistors; heat tracing systems including insulation; microprocessor based process controllers; local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... anks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site; and instrumentations, including relief, breather, and rim vent values; nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems; for oil, hydrocarbon (petroleum crude, products, byproducts, intermediate and blend components), water, chemicals, slops, sludge storage in either cone, fixed, floating, dome or internal floating roof configurations; solids storage in silos, bins or hoppers and LPG/propylene/ethylene/propane/butane storage in spheres, bullets or cryogenic tanks; and instrumentation and control systems. 24. All types of Columns, either supplied separately or together; comprising of grids, screens, distributors, nozzles and their supports/fasteners and accessories; for services like absorption, desorption, striping, fractionation, distillation, splitting, stabilization, extraction, washing or scrubbling services; and column internals comprising of trays either bubble, jet, multi downcorner (MD), sieve or valve trays; or either random or structured type packings; and their a ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... pe control valves; shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vacuum relief valves; pilot operated safety valves, and vales for specialised services, such as catalyst addition systems and lock hopper control systems. 30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security & Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optinizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers, interfaces, relay cabinets, engineering controls, large display screens, microwave transmission and receiver equipments, logic multipoint recorder/multiplexers, and their hardware and software. 31. All types of Fire & Gas Detection Systems, consisting of LEL/fire/smoke/UV/gas/IP/toxic detectors; panels, cables, weather protection housing, junction boxes, detector cards, cabinets, calibration equipments, beacons and lights and their hardware and ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... low, medium & high strength steel, fasteners; and special application refractory/copalite/sulphide resistant quick setting cements. 37. All types of ferrous or non-ferrous prefabricated/semi fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated. 38. All types of Analyzers, either on-line or off line; for measurement of H2S, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point; and analyzer sampling systems/ cubicles; analyzer houses with sample conditioning systems' sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes. 39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/byproducts, quality parameters; and including sample collection equipments, gas/ion chromatograph, CFR engines for octane & cetana number, pulse NMR, spectrophotometers of different types, distillation equipment systems, analyzer ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tenance of the goods specified in this List. LIST 27 (See S. No. 169 of the Table) (1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity (2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7 m size and above (3) Slip form/fixed form paverfinisher for laying concrete pavement (4) Surface dressing equipment (self propelled) (chips spreader) (5) Slurry seal machine for filling up cracks in roads (6) Kerb laying machine (7) Mobile bridge inspection unit (8) Mechanical broom with blower (9) Toll collection and traffic control equipment (10) Electronic Total station instrument for topographic survey (11) Global Positioning System (GPS) Instrument (12) Stone crushing (cone type) plants (13) Concrete Batching plants 50 cum/hr or more (14) Hydraulically operated self propelled pilling rig with accessories (15) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom (16) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchore (17) Mobile concrete pump placer of 90/120 CU.M/HR capacity (18) Automatic asphalt extraction equi ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
