9911796707
TMI BlogAmendment of Category 3D001 of SCOMET ListX X X X Extracts X X X X X X X X Extracts X X X X ..... Organisms, Materials, Equipment and Technologies (SCOMET) that was notified vide Notification No.37 (RE-2012) /2009-2014 dated 14th March, 2013. 2. The existing entry in SCOMET Category 3D001 is substituted with the following : 3D001 (1) Reaction Vessels , Reactors or Agitators (i) Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0.1 m (100 l) and less than 20 m (20000 l), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from the following materials: nickel or alloys with more than 40% nickel by weight; alloys with more than 25% nickel and 20% chromium by weight; fluoropolymers (polymeric or elastomeri ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ned (including vitrified or enamelled coating); tantalum or tantalum alloys; titanium or titanium alloys; zirconium or zirconium alloys; or niobium (columbium) or niobium alloys. (3) Heat Exchangers or Condensers Heat exchangers or condensers with a heat transfer surface area of greater than 0.15 m , and less than 20 m ; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the chemical(s) being processed are made from the following materials: nickel or alloys with more than 40% nickel by weight; alloys with more than 25% nickel and 20% chromium by weight; fluoropolymers (polymeric or elastomeric materials with more than 35% f ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... uipment in which all surfaces that come in direct contact with the chemical(s) being processed are made from the following materials: nickel or alloys with more than 40% nickel by weight; or alloys with more than 25% nickel and 20% chromium by weight. (6) Valves Valves with nominal sizes greater than 1.0 cm (3/8") and casings (valve bodies) or preformed casing liners designed for such valves, in which all surfaces that come in direct contact with the chemical(s) being produced, processed, or contained are made from the following materials: nickel or alloys with more than 40% nickel by weight; alloys with more than 25% nickel and 20% chromium by weight; fluoropolymers (polymeric or elastomeric materials with more tha ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... 0.6 m3/h, or vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m /h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials: nickel or alloys with more than 40% nickel by weight; alloys with more than 25% nickel and 20% chromium by weight; fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight); glass or glass-lined (including vitrified or enamelled coating); graphite or carbon-graphite; tantalum or ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... cting and controlling the flow of chemical warfare agents or any controlled precursor chemical. Note 1. The objective of these controls should not be defeated by the transfer of any non-controlled item containing one or more controlled components where the controlled component or components are the principal element of the item and can feasibly be removed or used for other purposes. N.B. In judging whether the controlled component or components are to be considered the principal element, governments should weigh the factors of quantity, value, and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the item being procured. Note 2. ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
