Hot Rolled Non Alloy Steel Plates/Sheets /hoops & Strips. (including skelp)/ wide Coils through DC arc Furnace Route (for open Cycle Operation) - Standards of Input Output Norms (SION) - C. Engineering Products

C508 Hot Rolled Non Alloy Steel Plates/Sheets /hoops Strips. (including skelp)/ wide Coils through DC are Furnace Route (for open Cycle operation) 1000 kgs 1 a) Copper Scrap/Copper Cathode/Copper Wire Bar/Copper Rod (if copper is present in the export product) 0.04 kg (b) Energy Sources /Fuels (Natural gas/LNG, NGL (Condensate/ gaseous), Naptha, HSD Oil, Furnace Oil) (Only for plants having captive power plant with facilities installed for use of specific energy sources/Fuel) 2626330K. Cal (c).Energy Sources / Fuels (natural gas/LNG, NGL (condensate/ gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil) (for re-heating furnace in rolling mills, ladle heating and tundish pre-heating) 565670 K Cal. 1 NGL for re-heating furnaces in rolling mills, ladle heating and tundish pre-heating (only for plants having facilities installed for the use of this fuel) 56 kgs 2 MAJOR INPUTS : 2 (a) Non-Alloy Steel Melting Scrap/ Direct Reduct Iron (Sponge Iron/Hot Brequitted Iron)/ Pig Iron 1111 Kgs. 2 b) Lime Stone 200 kgs 3 i) ADDITIVES : i) a) Cored wires/lumps/ powder of Calcium Silicide (CaSi) 1 kg i) b) Silico Manganese OR 13 kgs 3 i) Ferro Silicon 3 kgs 3 ii) Ferro Manganese 10 kgs c) Raw Petroleum Coke /Calcined Petroleum Coke/Metallurigical Coke/Coke Breeze 5 kgs d) Cored Wires/Scrap/ Ingots/Shots of Aluminium 1 kg e) Dolomite 40 kgs f) Ferro Titanium/ Ferro Vanadium/ Ferro Phosphorous/ Ferro Aluminium/ Ferro Chrome/Ferro Boron/Ferro Niobium(if these are actually present in the export product) 3 kgs 3 ii) MISC. ITEMS: a) Graphite Electrode 4 kgs b) Rolls for Rolling Mill 1.2 kgs c) Copper lined Moulds for casting 0.013 kg d) Saw/Shear Blade 0.1 kg e) Ceramic coated lancing pipe 0.02 No. f) Temperature Tips 0.1 No. g) Sampler Tips 0.5 No. h) Casting Powder 2 kgs i) Fluorspar/Mould Flux 1.5 kgs j) Oxygen/Sampler probes 0.002 No. k) Rolls for Caster 0.5 kg l) Hydraulic Oil/ Lubricating Oil 1.7 kgs m) Transformer Oil 0.59 kg 3 iii) REFRACTORIES : a) Zirconia /Magnesia Nozzles 25.8 kgs b) Aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads Stoper Rods/Shrouds 25.8 kgs c) Porous Plugs/seat Blocks/Sleeves/Slide Gate Plates 25.8 kgs d) Direct Bonded basic Bricks 25.8 kgs e) EBT Tube/Mass/Bricks 25.8 kgs f) Monolithic/Gunning/ Ramming Mass/Castable 25.8 kgs g)Dolomite Magnesia Carbon Bricks 25.8 kgs h) Ladle inner Nozzles/ collector Nozzles/ Nozzle filling Mass/ Refractory Nozzles 25.8 kgs i) Reheating Furnace Refractories 25.8 kgs j) Black Refractories 25.8 kgs k) Roof Refractories 25.8 kgs l) Tundish Refractories 25.8 kgs m) Tundish Gunning Mass 25.8 kgs n) Tundish Powder 25.8 kgs o) Purging Refractories 25.8 kgs Note:1. This norm is applicable for export product manufactured through DC Electric Arc Furnace Route for open cycle operation. Note:2. Items at Sl. No. 3(i) (f) i.e. Ferro-Titanium/Ferro Phosphorous/Ferro Chrom/Ferro Boron/ Ferro Niobium will be allowed if these are actually present in the export product. Note:3. Import of either one or a combination of the energy sources/fuels mentioned against S.Nos. 1(ii) 1(iii) shall be permitted within the overall calorific value, subject to further actual user condition. Note:4. Quantity of specific fuel(s) in kgs/Cubic meter/K.Ltr shall be obtained by dividing the K.Cal figure by the net calorific value/heal value of the fuel(s) detailed below:- Net Caloric Values of Fuels 1. Natural Gas-8400K.Cal/Cubic Mtr. 2. LNG-11436K.Cal/ Kg 3. Naptha-10610K.Cal/Kg 4. NGL - 10610 K.Cal/Kg 5. LDO-10060K. Cal/Kg 6. F.O.-9790K.Cal/Kg 7. HSD-10230K.Cal/Kg. [Deleted - Note:5 - stands deleted with effect from 01.09.2004 Note:5. These norms are not applicable to DFRC Scheme as per General Note No. 7 in Standard Input Output Norms Book] Note:6. Import of DRI shall be allowed upto 90% of the total metallic input of 1111 kgs. Note:7. Import of Pig Iron may be allowed upto 10% of the total metallic input of 1111 kgs.