Non Alloy/Alloy/ Stainless Steel Bars & Rods (including Rounds, Flats, Hex- agons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/Strips/wide Coils, Blooms, - Standards of Input Output Norms (SION) - C. Engineering Products

C512 Non Alloy/Alloy/ Stainless Steel Bars Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/Strips/wide Coils, Blooms, Billets, Slabs, Ingots, wires, pipes and tubes, Skelp, Rails and Sleeper 1000 kgs 1 i) Copper Cathode/Copper Wire Bar/Copper Rods (if copper is present in the export product) 0.04 kg ii) Copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds) 0.1 kg iii) Furnace Oil/LSHS/Naptha 13 kgs 2 MAJOR INPUTS: i) Non-Alloy Steel Melting Scrap 330 kgs ii) Pig Iron 31.774 kgs iii) Low silica lime Stone 620 kgs iv) Coking Coal OR Low Ash Metallurgical Coke (LAM Coke) 1000 kgs, 700Kgs. Metallurgical Coke 700 kgs 3 i) ADDITIVES: a) Cored wires/scraps/ shots/ingots of aluminium 1.466 kgs b) Ferro Niobium 0.035 kg c) Ferro Vanadium 0.004 kg d) Ferro Silicon/ Ferro Manganese/ Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide Sinter/Ferro Nickel/Charge chrome provided the alloying elements is/are actually present in the export product. 17.00 kgs e) Calcium Silicide (CaSi) 1.5 kg f) Raw Petroleum Coke 2.3 kgs 3 ii) MISC. ITEMS: a) Silicon Carbide Grains 2.0 kgs b) Rolls/Tungsten Carbide rings for Rolling Mill 1.77 kgs c) Celox Inserts/Oxygen measuring probes 0.004 kg d) Thermodynamic elements 0.325 kg e) Magnesia Reagent/ Desulphurisation Compound 0.006 kg f) Silica Gel/Mobile Sorbead 0.010 kg g) Freon Gas-142/114(Net of Cylinders) 0.010 kg h) Stainless steel Hoses 0.007 kg i) shear Blades/Saw Blades 0.010 kg j) Oxygen Lance pipes 0.750 kg k) Rolling Mill Oil 0.500 kg l) Casting Powder 2.083 kg m) Temperature Tips 0.022 kg n) Canned Elements/Pearmeable elements for combined blowing 0.200 kg o) Graphite electrodes (only those having VADR facilities) 1.000 kg p) Welding flux 8.0 kgs q) Weld wire 4.0 kgs r)Surface protection film 13.3 kgs s)Copper lined mould for casting 0.013 kg t) Refractory Bricks/ Shapes and/or Dead Burnt/ Sea Water/ Fused Magnesia for Captive use for manufacture of Bricks/ Shapes 9 kgs u) Monolithic Refractory Viz. Castable, Gunning Mass Ramming Mass and /or Dead Burnt/ Sea Water/Fused Magnesia for Captive use for manufacture of Monolithic Refractory 5 kgs v) Special Refractories namely, Continuous Cast refractories (such as Shrouds, Mono Block Stoppers and Sub-entry Nozzles), Slide Gate refractories, Porous Plug Zircon/ Zirconia Nozzles and Tundish Nozzles 1 kg Note 1.The above norm is applicable only if the export product(s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Ferro Niobium and Ferro vanadium would be permitted only if the alloying element namely Niobium and Vanadium is present in the export product. 3. Item of import at Sl.No.1 (ii), 3(ii)(b)(i)(l) (p) (q)(s) and continuous cast refractories and Tundish Nozzles at (v) shall not allowed in case of export of Steel ingots. 4. Item of import at Sl.No.1 (ii), 3(ii), (c), (m) 3 (iii) (a), (b), shall not be allowed in case of rolled blooms/ billets/ slabs. However, against export of rolled billets made through continuous cast blooms, continuous cast refractories Tundish Nozzles under 3(ii)(v) shall be allowed. 5. Item of import at Sl.No.3 (ii) (p) and (q) shall be allowed in case of export of pipes and tubes only. The item of import at Sl. No 3 (ii) (r) shall be allowed in case of export of CRGO/CRNGO sheets. 6.The item NonAlloy Steel Melting Scrap will be allowed as per the definition given in section XV of Customs Tariff. 7.The item at Sl. No. 3 (ii)(s) shall not be allowed in case of import of item at Sl.No.1 (ii). Similarly, in case of import of item at Sl.No. 1 (ii), the item at Sl.No.3 (ii) (s) will not be allowed.