Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermo-mechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists,Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots - Standards of Input Output Norms (SION) - C. Engineering Products

C511 Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermo-mechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists, Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots 1000 Kgs 1 Calibrated Iron Ore with 65% and more Iron content (a) 690 Kg for stainless steel (b) 1250 Kg for other steel 2 Non alloy steel melting scrap (a) 200 Kg for stainless steel (b) 360 Kg for other steel 3 Liquefied Petroleum Gas 76 Kgs 4 Reformer catalyst 0.06 Ltrs 5 Briquetting moulds 0.0006 Nos 6 Non coking coal (with ash content less than 12%) 850 Kgs 7 Graphite Electrode 6 Kgs 8 Cored wire/ lumps/ powder of calcium silicide (CaSi) 1Kg 9 Rolls/Tungston Carbide rings for rolling mills 1.77 Kgs 10 Copper Mould 0.0007 Nos 11 Silico Manganese OR (Qty. in Kgs as in formula 1 of note 7) 11 a) Ferro Silicon (Qty. in Kgs as in formula 2 of note 7) b) Ferro Manganese (Qty. in Kgs as in formula 3 of note 7) 12 Refractory comprising of : a) Zirconia/magnesia nozzles (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel b) Aluminium Graphite nozzles/monoblock stoppers/stopper heads/stopper rods/shrouds (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel c) Porous plugs/ seat blocks/ sleeves/ slidegate plates (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel d) Direct bonded basic bricks (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel e) EBT tubes/Mass/Bricks (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel f) Monolithic/gunning/ramming mass/castables (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel g) Dolomite/magnesia carbonbricks (i) 10 Kgs for non alloy steel (ii) 25 Kgs for stainless steel (iii) 15 Kgs for alloy steel other than stainless steel 13 Other Ferro alloys including nickel oxide, sinter, ferro nickel, charge chrome provided the alloying element(s) is/ are actually present in the export product. (Qty. in kgs. as in formula 4 of Note 7 below) 14 Casting Powder 2 Kgs 15 Saw/Shear blade 0.01 Kgs 16 Copper scrap/Copper Cathode/Copper Wire Bar/Copper Rod (if copper is actually present in the steel) 0.04 Kgs 17 Furnace oil (for captive power plant) 70 Kgs 18 Furnace oil for oil fired reheating furnace in the rolling mill 50 Kgs 19 Furnace oil for ladle heating 6 Kgs 20 Lubricant/Gear oil (for captive power plant) 0.65 Kgs 21 Low silica Lime Stone 100 Kgs 22 Cored wire/scrap/ingot of aluminium 1 Kg 23 Cored wire of lead/lead shots (in case of export of lead bearing steel only) 2.5 Kgs 24 Raw Petroleum Coke 5.0 Kgs 25 Ceramic coated lancing pipe 1 Nos 26 Temperature Tips 0.5 Nos 27 Sampler Tips 0.25 Nos 1. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff. 2. The above norms are applicable only if the export product(s) is manufactured through Gas/Coal based sponge iron-Electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw material 3.The item at Sl. No.(6) would not be allowed If export product(s) are manufactured through gas based sponge iron route and the items at Sr. No.(3) (4) (5) would not be allowed if export product(s) are manufactured through coal based sponge iron route 4. In case of export product(s) manufactured through induction furnace route, the item at Sr.No.(7)will not be allowed. 5. In case of continuous cast billtes/blooms/slabs produced through continuous casting route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however, in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/Tunsten rings and refractories shall be allowed. 6. Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15) (18) shall not be permitted against export of ingots. 7) Formula: 1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese content in Steel) 2) 1100 x (mean average of % silicon content in steel)/ (mean average of % Silicon content in ferro silicon) 3) 1100 x (mean average of % Manganese content in steel)/ (mean average of % Manganese content in ferro manganese) 4) 1100 x (mean average of % Alloy content in steel)/ (mean average of % alloy content in respective ferro alloys) 5) The total CIF value of items at Sl. No. 4,7,9,11,24,25,26 and 27 shall not exceed 25% of the CIF value of the licence.