Non-alloy steel wire (uncoated) - Standards of Input Output Norms (SION) - C. Engineering Products

C515 Non-alloy steel wire (uncoated) 1000 Kgs 1 Major Input comprising of: a) Non Alloy Steel melting scrap/Direct Reduced Iron (HBI/Sponge Iron) 360Kgs. b) Low Silica lime stone 218 Kg c) Metallurgical coke (with ash content below 15%) 610Kg. 2 Additives comprising of: i) Cored wires/ lumps/ powder of calcium silicide (CaSi) 22.46 Kgs ii) Silico Manganese OR 22.46 Kgs a) Ferro Silicon 22.46 Kgs b) Ferro manganese 22.46 Kgs iii) Raw Petroleum coke 22.46 Kgs iv) Cored Wires/ Scrap/ Ingots/ Shots of aluminium 22.46 Kgs v) Copper Scrap/ Copper Cathode/ Copper Wire Bar/Copper Rod(if copper is actually present in the export product) 0.04 kgs vi) Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only) 2.5 kgs 3 a) Refractories and Misc. Items: i) Graphite Electrode 27 Kg ii) Rolls/ Tungsten Carbide rings for rolling mill 27 Kg iii) Copper lined mould for casting 27 Kg iv) Saw/ shear blade 27 Kg v) Ceramic coated lancing pipe 27 Kg vi) Temperature tips/ Celox inserts 27 Kg vii) Sampler tips 27 Kg viii) Submerged tuyers/Oxygen lance pipe/Oxygen Supersonic lance/tip. 27 Kg ix) Atmospheric injector 27 Kg x) Stainless Steel hoses 27 Kg xi) Refractory items comprising of: 27 Kg a) Runner Mass for Mini Blast Furnace/ Castable for Mini Blast Furnace (MBF) 27 Kg b) Graphite Carbon refractories for Mini Blast Furnace (MBF) 27 Kg c) Magnesia reagent Desulphurisation compound 27 Kg d) Zirconia/ Magnesia nozzles 27 Kg e) Aluminium graphite nozzles/ Monoblock stoppers/stopper heads/ stopper rods/ shrouds 27 Kg f) Porous plugs/ Seat Blocks/ Sleeves/ Slide gate plates 27 Kg g) Direct bonded basic bricks 27 Kg h) EBT tubes/ Mass/ Bricks 27 Kg i) Monolithic/gunning/ramming Mass/Castables 27 Kg j) Dolomite/ Magnesia Carbon bricks 27 Kg k) xii) Casting Powder 27 Kg 3 b) Wire drawing misc. items Comprising of: i) Dry drawing lubricant 34 Kg ii) Wire drawing soap 34 Kg iii) Wet drawing lubricant 34 Kg iv) Tungsten carbide dies 34 Kg v) Plastic bobbins/ spools 34 Kg 4 Energy sources comprising of: a) i) Furnace oil ( for units with captive power plant) 30 Kg ii) Lubricant ( for units with captive power plant) 0.65 kg. 4 b) i) Furnace oil for oil fried reheating frunace in Rolling Mill 50 Kg ii) Furnace oil for ladle heating 6 kg Note 1.The above norms is applicable only if the export product(s) is/are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item at Sl. No. 3(b) (iii) (iv) (v) shall be allowed against export of wire of size below 1mm dia only. 3. Import of Direct Reduced iron shall be limited to 10% of total metallic input 360Kgs.