Non-Alloy steel wire uncoated (from melting scrap) - Standards of Input Output Norms (SION) - C. Engineering Products

C516 Non-Alloy steel wire uncoated (from melting scrap) 1000 kg 1 Major Inputs comprising of: a) Non Alloy Steel Melting Scrap 1200 Kgs b) Low Silica Lime Stone 95 kgs 2 Additives comprising of : a) Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi) 22.46 kgs b) Silico Manganese Or (i) Ferro silicon (ii) Ferro manganese 22.46 kgs c) Raw Petroleum Coke 22.46 kgs d) Cored Wires/ Scrap/ Copper Cathode/Copper Wire Bar/Copper Rod(if copper is actually present in the export product) 22.46 kgs e) Copper Scrap/ Copper Cathode/Copper wire Bar/Copper Rod(if copper is actually present in the export product) 0.04 kgs f) Cored caWires of lead/ lead Shots. (in se of export of lead bearing free cutting steel only) 2.5 kgs 3 Refractories Misc. Items a) Graphite Electrode 20 kg b) Rolls/ Tungsten Carbide Rings for Rolling mill 20 kg c) Copper lined Moulds for casting 20 kg d) Saw/ Shear Blade 20 kg e) Ceramic coated lancing pipe 20 kg f) Temperature Tips 20 kg g) Sampler Tips 20 kg h) Refractory items comprising of: 20 kg 1) Zirconia/ Magnesia Nozzles 20 kg 2) Aluminium Graphite Nozzles/ Monoblock Stoppers/ Stopper head/Stopper Rods/ Shrouds 20 kg 3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates 20 kg 4) Direct Bonded basic Bricks 20 kg 5) EBT Tube/ Mass/ Bricks 20 kg 6) Monolithic/ Gunning/ Ramming Mass/ Castables 20 kg 7) Dolomite Magnesia Carbon Bricks 20 kg 8) Ladle inner Nozzles/ collector Nozzles 20 kg 3 i) Casting Powder 20 kg 4 Wire drawing Misc. Items comprising of: a) Dry drawing lubricants 34 kgs b) Wire drawing Soap 34 kgs c) Wet drawing lubricant 34 kgs d) Tungsten carbide dies 34 kgs e) Plastic bobbins/ spools 34 kgs 5 Energy sources comprising of: a) (i) Furnace Oil (for Units with captive power Plant) 70 kgs (ii) Lubricant (for units with captive power Plant) 0.65 kg 5 b) (i) Furnace oil for oil fired Reheating Furnace in Rolling Mill. 50 kgs (ii) Furnace oil for Ladle heating 6 kg Note 1. The above norms is applicable only if the export product(s) is/are manfactured through Electric arc furnace/ Induction furnance route using steel melting scrap as basic raw material. 2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed. 3. Import of items at Sl.Nos 4(c)(d) and (e) shall be allowed against export of wire of size bellow 1mm dia only. 4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.