Amendment/correction in the schedule of DEPB rates - DGFT - 52 (RE-03)

Amendment/correction in the schedule of DEPB rates PUBLIC NOTICE NO. 52(RE-03) Dated 26/02/2004 In exercise of the powers conferred under paragraph 2.4 of the Export and Import Policy, 2002-2007 and paragraph 1.1 of Handbook of Procedures ( Vol.I), the Director General of Foreign Trade hereby makes the following amendment/correction in the Schedule of DEPB rate. I. The following corrections are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 and these corrections are effective from 9th February, 2004. Product Group: Engineering Product Code:61 (i) All the DEPB rates relating to Engineering Products notified vide Public Notice No.47 (RE-2003)/2002-2007 dated 9th February, 2004, are substituted as Annexed to this Public Notice. Product Group: Chemicals Product Code:62 (i) The DEPB rate of Sl. No.326 is corrected to read as 9%. (ii) The DEPB rate of Sl. No.464 is corrected to read as 6%. (iii) The DEPB rate of Sl. No.871 is corrected to read as 5%. Product Group: Plastics Product Code:63 (i) The DEPB rate of Sl. No.2 is corrected to read as 11%. (ii) The DEPB rate of each of Sl. Nos.33A, 33B, 33C, 33D, 33E 33F is corrected to read as 12%. Product Group: Leather Product Code:64 (i) The DEPB rate of each of the Sl. Nos.6,9,12,13 is corrected to read as 7%. (ii) The DEPB rates of Sl. No.24 is corrected to read as 10%. Product Group: Textiles Product Code:89 (i) The description of the export product at Sl.No.34A is corrected to read as "Woven Shawls/Scarves/Mufflers and Made-ups made of 100% Wool with or without embroidery". (ii) The description of the export product at Sl.No.44A is corrected to read as " Bleached/Dyed and/or printed manmade-cotton blended fabrics 'with or without embroidery' and/or 'with or without metallised yarn' (manmade content more than 50% by weight)". (iii) The description of the export product at Sl. No.44C is corrected to read as " Bleached/Dyed and/or Printed Polyester- Cotton Blended Made-ups ( with or without embroidery and/or with or without metallised yarn ( Polyester content more than 50% by weight.)". II. The DEPB rate of 13% of Sl. No. 353 of Product Group Engineering (Code No 61) notified vide Public Notice No.46 (RE-03)/2002-2007 dated 4th February, 2004 is corrected to read as 20% with effect from 01.04.2003 till 08.02.2004. III. The following amendments are made to the Schedule of DEPB rate published vide Public Notice No.47 (RE 2003)/2002-2007 dated 9th February, 2004 :- Product Group: Engineering Product Code:61 (i) The DEPB rate and value cap of Sl.No.410 is amended to read as 13% and Rs.75/- per Kg. respectively. (ii) The DEPB rate and value cap of Sl.No.411 is amended to read as 11% and Rs.70/- per Kg. respectively. (iii) The DEPB rate and value cap of Sl.No.412 is amended to read as 11% and Rs.185/- per Kg. respectively. (iv) The DEPB rate and value cap of Sl.No.530 is amended to read as 13% and Rs.175/- per Kg. respectively. This issues in the public interest. ( L. MANSINGH ) DIRECTOR GENERAL OF FOREIGN TRADE ( File NO. 01/83/162/288/AM03/DES.VIII/Vol.IX ) Annexure-1 PRODUCT GROUP : ENGINEERING PRODUCT CODE : 61 S.No. Export Product Rounded Off Rates Value Cap 1 2 3 4 1 All Aluminium Conductors (AAC) bare 9 2 Aluminium Conductors Steel Re-inforced (ACSR) 9 3 Aluminium conduit bodies made of Aluminium and other alloying constituents 7 4 Aluminium Flexible Tubing 7 5 Deleted 0 6 Table, Kitchen and other Household Articles made of Aluminium with or without handle, irrespective of what material the handle may have been made of 7 7 Extruded aluminium products including pipe and tubes 7 8 Cast articles including parts/components of Aluminium 7 Rs.125/Kg 9 Rolled Aluminium plates, sheets, strips including corrugated Aluminium sheets/strips 7 10 11 KV Heat shrinkable Dry type indoor termination for Switch gear with line in Boot for XLPE cable 240 mm sq. 11 11 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 185 mm. sq. 11 12 11 KV Heat shrinkable Dry Type outdoor termination for XLPE cable size 3 X 95 mm. sq. 11 13 600/1000 V Heat shrinkable straight joints for cable size 4 X 240 mm. sq 11 14 600/1000 V Heat shrinkable straight joints for cable size 4 X 185 mm. sq. 11 15 600/1000 V Heat shrinkable straight joints for cable size 4 X 120 mm. sq. 11 16 600/1000 V Heat shrinkable straight joints for cable size 4 X 70 mm. sq. 11 17 600/1000 V Heat shrinkable straight joints for cable size 4 X 16 mm. sq. 11 18 600/1000 V Outdoor overhead termination complete with cable lugs Armour clamping ring for 4 core copper cable 4x120 Sq.mm 11 19 Electrical Wiring Accessories/Components wholly made of Brass 10 Rs.240/Kg. 20 Complete ceiling fan with metal blades (36"/42 /48 /56 /60 ) 5 21 Electric Pedestal Fan 9 22 Electric table fans 9 23 Fluorescent Tubes (18/20 /36/40 Watts) 11 24 Galvanised transmission line towers and parts thereof 10 Rs.45/Kg. 25 GLS Lamps (upto 100 Watts and below) 11 26 H.P.M.V. Lamps (250 W) 11 27 H.P.S.V Lamps (250 W) 11 28 H.P.S.V Lamps Arc Tube (Burners) (150/250/400 W) 11 29 H4 Halogen Lamps 45/40W to 130/90W (12 V to 24 V) 11 30 Insulation Tube Heat Shrinkable (For sleeve conductor) 16 to 25 mm sq. Copper Conductor. 11 31 Insulation Tube Heat Shrinkable (For sleeve conductor) 70 to 120 mm sq. Copper Conductor 11 32 Insulation Tube Heat Shrinkable (For sleeve conductor) 185 to 240 mm. sq. Copper conductor 11 33 Marine Cable flexible Non Burning (TPR) 4 X 1.5 10 34 Marine Cable flexible Non Burning (TPR) 4 X 2.5 10 35 Marine Cable flexible Non Burning (TPR) 12 X 1.5 10 36 Marine Cable flexible Non Burning (TPR) 3 X 4.00 10 37 Marine Cable flexible Non Burning (TPR) 3 X 6.00 10 38 Marine Cable flexible Non Burning(TPR) 2 x 1.5 10 39 Marine Cable flexible Non Burning(TPR) 3 x 1.5 10 40 Marine Cable Non Burning for Stationary laying (PVC) 2 X 1.5 10 41 Marine Cable Non Burning for Stationary laying (PVC) 2 X 2.5 10 42 Marine Cable Non Burning for Stationary laying (PVC) 3 X 1.5 10 43 Marine Cable Non Burning for Stationary laying (PVC) 3 X 2.5 10 44 Marine Cable Non Burning for Stationary laying (PVC) 3 X 10.00 10 45 Marine Cable Non Burning for Stationary laying (PVC) 3 X 16.00 10 46 Marine Cable Non Burning for Stationary laying (PVC) 3 X 25.00 10 47 Marine Cable Non Burning for Stationary laying (PVC) 3 X 50.00 10 48 Marine Cable Non Burning for Stationary laying (PVC) 3 X 70.00 10 49 Marine Cable Non Burning for Stationary laying (PVC) 3 X 95.00 10 50 Marine Cable Non Burning for Stationary laying (PVC) 7 X 1.5 10 51 Marine Cable Non Burning for Stationary laying (PVC) 12 x 1.5 10 52 Out door Weather proof light fitting with Glass Shell/ Acrylic cover excluding Automotive light fittings. 9 53 Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush PVC Shroud (with or without ring, lock and nut) 10 54 Single Phase Electrical Energy Meter 10 55 11 KV straight through Joints for XLPE Copper Cable size 3 x 95 Sq. mm. 10 56 Starter Motor Armature for High Speed Vehicles Cars etc. 8 57 Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps) 10 58 Stator for Alternator for Medium Duty (12 Volts 95-105 Amps) 10 59 Steel Welding Electrodes 11 60 Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII 5 61 Three Phase Electrical Energy Meter 10 62 Tinned/Untinned copper cables lugs /sockets/ connections 10 Rs.260/Kg 63 Tinned/Untinned copper ferules 10 Rs.260/Kg 64 Tinned/Untinned copper terminals ends 10 Rs.260/Kg. 65 Ferrous Automotive Products 3 66A Nuts/Bolts/screws/washers made of Alloy steel including stainless steel 10 Rs.60/Kg. 66B Nuts/Bolts/Screws/washers made of Non-alloy Steel 10 Rs.25/Kg 67A Bright bars made out of Stainless Steel 13 Rs.90/Kg. 67B Bright bars made out of Mild Steel 10 Rs.30/Kg 67C Bright bars made out of items other than Stainless Steel and mild steel 10 Rs.35/Kg. 68A Carbon Steel/ Non Alloy Steel Forgings (Machined) 13 Rs.105/Kg. 68B Alloy Steel Forgings (Machined) 13 Rs.175/Kg 68C Stainless steel forgings (Machined) 13 Rs.400/Kg. 69A Carbon Steel/Non Alloy Steel Forgings (Rough) 13 Rs.85/Kg. 69B Alloy Steel Forgings (Rough) 13 Rs.125/Kg 69C Stainless steel forgings (rough) 13 Rs.300/Kg. 70A High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Alloy steel/Stainless steel 8 Rs.60/Kg. 70B High tensile precision fastners Cold/ Hot forged Bolts/ Screws/Nuts-All varieties of Non-Alloy steel 8 Rs.25/Kg. 71A Hot forged nuts of Alloy Steel including Stainless Steel 10 Rs.60/Kg. 71B Hot forged nuts of Non-Alloy Steel 10 Rs.25/Kg. 72 Cast Iron Products (Rough/Machined) (not elsewhere specified) 8 73 Powrah/Hoe/Pickaxe/Kudali/ Pick Mattock/ Cutter Mattock/ Trowel/ Transplantor /Fork/ Cultivator/ Weeder made of Iron and/or steel 9 Rs.40/Kg. 74 Chisels made of forging quality carbon steel 9 75 Drop forged Pliers of Alloy steel/Non-alloy Steel 9 76 Hand Drill 10 77 High Tensile precision Industrial Wrenches made of AISI-8650 (High Tensile) 9 78 Pipe Wrenches 9 79 Punches 9 80 Screw Drivers (Nickel plated) 9 81 Spanners made of alloy/non-alloy steel 9 82 Steel files of Alloy Steel 9 83 Steel files of High Carbon Steel 9 84 Steel Vices 9 85 Cold Rolled Galvanised, Colour coated Non-Alloy steel sheets/ hoops and strips/ wide coils (plain / corrugated) 13 Rs.29000/MT 86 2" Galvanised flanges with rubber gaskets 10 87 2" Galvanised/ Zinc Coated Bungs 10 88 2" Galvanised/Zinc coated Flange 10 89 3/4" Flanges with or without Washer 10 90 3/4" Galvanised bungs with rubber gaskets 10 91 3/4" Galvanised flanges with rubber gaskets 10 92 3/4" Galvanised Zinc coated Bungs 10 93 3/4" Galvanised/ Zinc coated Flanges 10 94 Adjustable Bracket made out of MS sheet 10 95 Wood to steel adapter (All Types) 10 96 Aluminium collapsible tubes 7 97 Aluminium Pencil Sharpner 7 98 Aluminium rivets 9 99 Aluminium Utensils with Interior PTFE Coating Exterior painted (non-stick) with/ without handle. 4 100 Animal Drawn Ploughs/ Parts thereof 9 101 Arm Blade 11 Rs.20/Kg. 102 Aruvil Double Wheel Carrier kit Set 11 103 Axes 9 104 Ball Chain Cap 8 105 Barb Arm 11 106 Barb Arm Base 9 107 Black Pipes/ tubes including precision Tubes 13 Rs.20/Kg. 108 Bottom/Top Plate UM-1 made of Tin Plate 9 109 Box Hinge 12 110 Brace Band 12 111 Brace Rail End 12 112A Nuts milled from bar process of Alloy Steel including Stainless Steel 10 Rs.60/Kg. 112B Nuts milled from bar process of Non-Alloy Steel 10 Rs.25/Kg. 113 Brass Builder Hardware 7 Rs.325/Kg. 114 Brass Tubes 11 Rs.150/Kg. 115 Brass valves 7 116 Bull Dog Hinge 11 117 Seamless Butt Welded Steel Pipe Fittings made from Seamless/ERW Steel Tube 11 Rs.120/Kg. 118 Cl Cistern 8 119 Cl pipes and Fitting, not elsewhere specified 8 120 Coil Spring / Helical Coil Spring 10 Rs.20/Kg. 121 Collar of M.S. Sheet 13 122 Corner Arm 11 123 Crow Bar /Wrecking Bar 11 Rs.35/Kg. 124 Cultivator made of mild steel 9 125 Cut Hand tacks made of M.S. Sheets 9 126 Decorative Handicrafts/ Artwares made of Anodised Aluminium 4 127 Door/ Window/ ventilator Sections made of mild steel 9 128 Double Carrier Wheel 11 129 Drag Link Chain 10 130 Ductile Iron Spun Pipes 9 131 Electrolytic Tinplate components 6 132 Round/Eliptical /Oval Tin Plate container and/ or components thereof 8 133 Deleted 134 Female Hinge 12 135 Flange Plate 12 136 Floor Flange 9 137 Fork 11 138 Fork digging with socket 10 139 Galvanised non alloy Steel Wire Ropes (wire steel core) 9 140 Galvanised non alloy Steel Wire Ropes (fibre core) 9 141 Galvanised Pipes/ tubes with wall thickness above 3mm to 4mm 13 Rs.20/Kg. 142 Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness 1mm or below 13 Rs.20/Kg. 143 Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 1mm to 2mm 13 Rs.20/Kg. 144 Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 2mm to 3mm 13 Rs.20/Kg. 145 Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 3mm to 4mm 13 Rs.20/Kg. 146 Galvanised Pipes/ tubes conforming to ASTM Specification with wall thickness above 4mm to 5mm 13 Rs.20/Kg. 147 Galvanised Pipes/ tubes conforming to ASTM specification with wall thickness 5mm and above 13 Rs.20/Kg. 148 Galvanised Pipes/ tubes with wall thickness 1mm or below 13 Rs.20/Kg. 149 Galvanised Pipes/ tubes with wall thickness above 1mm to 2mm 13 Rs.20/Kg. 150 Galvanised Pipes/ tubes with wall thickness above 2mm to 3mm 13 Rs.20/Kg. 151 Galvanised Pipes/ tubes with wall thickness above 4mm to 5mm 13 Rs.20/Kg. 152 Galvanised Pipes/ tubes with wall thickness 5mm and above 13 Rs.20/Kg. 153 Galvanised Steel flexible Tubes/ Pipes (Conduit) in sizes ranging from 1/2" to 3" 12 Rs.35/Kg. 154 Gate Clip Made of Mild Steel 12 155 Gate Hold Back made of Mild Steel 12 156 Gate Latch Made of Mild Steel 12 157 Gun metal valves 7 158 MS Colour coated ghamla (made of HS Steel) 10 159 Heavy Duty 9 Tons Tillers (Spring loaded without spring cultivator) 3 160 Heavy duty Fork latch 11 161 Deleted 162 Deleted 163 High Chromium Grinding media balls 7 Rs.35/Kg. 164 Hot Dipped Galvanised tension Bar/ Gate Rods/ Truss Rods/ Drop Rods. 9 165 ILD Fork 11 166 ILD Guide 11 167 Industrial Offset Hinge 11 168 Industrial Offset Bracket 11 169 Industrial Locking Device 11 170 J-bracket 11 171 Locks and valves water pipe fitting 9 172 Loop Cap Made of Mild Steel 9 173 LPG Cylinders with valves 9 174 Male Hinge/Male Bracket Made of Mild Steel 11 175 Male Lag Bracket Made of Mild Steel 9 176 Marine freight containers of type ICC 20'x8'x8.5' 13 177 MS Paper pin Clip 11 Rs.40/Kg. 178 Steel Needle Screws Self colour or Plated 9 179 Nickel Plated M S Buckles 10 180 Offset Rail End 13 181 OTS Cans/ dingeley cans 9 182 Oxygen Cylinder dia 140 NF 11 183 Oxygen Cylinder dia 229 MM 11 184 Deleted 185 Photo frame (Brass) 7 186 Presensitised Positive Offset Aluminium plates 9 187 Pressure Stoves/ kerosene burners/ pressure lamps blow lamps/ pressure lanterns/ fancy light fittings made of brass 7 188 Rail End 13 189 Rakes/Garden Rakes/ Fork Manure Hooks made of Iron and/or Steel 12 190 Rectangular/ Square Tin Plate container and/ or components thereof 8 191 Rectangular/Square Tin Plate container and/or component thereof with round neck. 8 192 Rings, Lid and Tagger Assemblies (with or without matching Bottom Piece) 8 193 Deleted 194 Sanitary and bathroom fittings (of brass) 7 195 Sanitary and bathroom fittings (of gun metal) 7 196 Shovels/Spades made of Iron and/or steel, with or without handle, irrespective of what material the handle may have been made of 10 197 Folding bed made of mild steel 8 198 Sleeve made of Mild steel 13 199 Sleeve Bracket made of mild steel 13 200 Stainless Steel safety razor Blades 7 201 Stainless Steel Vacuum Flask 8 202 Stainless steel wire rope 9 203 Stapler 4 204 Steel Clamp (Galvanised) and ungalvanised-All types 11 205 Mild Steel pegs 10 206 Mild Steel Weld mesh 11 Rs.55/Kg. 207 Mild Steel Stranded wire 11 Rs.26/Kg. 208 Surgical blades other than made of High Carbon Steel 9 209 Surgical Blades made of High Carbon Steel 9 210 Table Pencil Sharpener made of plastics 7 211 Tension Band 11 212 Tiller Left Hand or Right Hand 9 213 Top and Bottom cover of Round Battery Jacket made from Tin plate 4 214 Tower Crane 11 215 Track Wheel 11 216 Twin type shaving system Disposable Razor Blades (one twin blade fixed on a Razor Handle with a protecting cap)/Razor Box (1 Razor Handle + 5 twin blades in a magazine both packed in a plastic box)/ Razor Card(1 Razor Handle + 5 twin blades in a magazine bubbled and fixed on a card)/ Magazine (5 twin blades packed in a magazine) 8 217 Twin type shaving system Razor/ Razor Handle 6 218 Mild steel U-Bolt 10 219 Deleted 220 Mild Steel Universal Bracket 11 221 Valve for LPG Cylinder, Hand wheel type, made of Brass 5 222 Water meters of outer casing made of brass. 5 223 M.S. Wire Nails 9 224 Wood screws made of carbon steel self colour or plated 9 225 Zinc plated (Galvanised) conduit Hanger 10 226 Ball/ Roller /Thrust/ clutch release/ spherical plain Bearing 8 Rs.600/Kg. 227 Bench Grinder 6" 5 228 Brazed Carbide Tools 9 229 Brazed Tools Carbide Tips 9 230 Pneumatic tool 7 231 Cutting Tools of High speed Steel (Cobalt Grade) 5 232 Cutting tools of High Speed Steel (Non-Cobalt Grade) 5 233A Casing Pipes conforming to API Specifications 5CT or equivalent of OD 114mm to 508mm (4 to 20)made out of Seamless Steel Pipes 13 Rs.130/Kg. 233B Casing Pipes confirming to API Specifications 5CT or equivalent of OD 114mm to 508 mm (4 to 20) made out of ERW Steel Pipes 13 Rs. 40/Kg. 233C Tubing/Hollow Drill Rods/Coupling/Core Barrels and substitutes made out of Carbon Steel Seamless Tube/Pipe 13 Rs.130/Kg. 234 Drills/Reamers End Mills/ Broaches Milling cutters incuding Threading Tools/ Taps of High Speed Steel (Non-Cobalt Grade). 8 235 Drills/Reamers End Mills/ Breaches/Milling cutters including Threading Tools/ Taps of High speed (Cobalt Grade) 8 236 Pneumatic Revetting hammer 7 237 Resin bonded diamond wheels 4 238 Saws/ Segments made from high speed steel strips/ sheets 5 239 Front Engined Three Wheeler Drive away Chasis in CKD/SKD/ CBU condition 11 240 Rear Engined Auto Rikshaw in CKD/SKD/CBU condition 11 241 Scooter (in CKD/SKD/CBU condition) 11 242 Motor Cycle (in CKD/SKD/CBU condition) 11 243 Moped (in CKD/SKD/CBU condition) 11 244 Alternator Assembly 9 245 Non-alloy Steel Anchor Pin 11 246 Armature for Delcoremy type motor 10 247 Armature for Dynamo 10 248 Starter Motor Armature for Low Speed Vehicles 7 249 Automobile Tyre-Tube Valves 11 250 BB Axle 11 251 Brake shoe plate 13 252 Cam 10 253 Cam Shaft 10 254 CBH Flate for starter motor 10 255 Commutator 7 256 Cone Sleeve/Axle Stud sleeve 11 257 Connecting Rod 6 258 Cotter pin made of steel of any quality 11 259 Crank for chain wheel 10 260 Crank Shaft (for four wheelers) 10 261 Crank Shaft (for two wheelers) 10 262 Crank-shaft Forgings/ connecting rod forgings 10 263 Deep Well Hand pump complete without connecting Rods with/ without spares Tools 12 264 Deepwell hand pump with 10 connecting rods. 12 265 Draw bars 10 266 Drive assembly for starter motor 9 267 End-Cap Assembly 8 268 Field Coil for Starter Motor 9 269 Flex Plate Assembly 9 270 Flywheel Starter Ring Gear 9 271 Front Axle beam/I-Beam 11 272 Front/rear axle shaft 11 273 Full Tension Sleeve made of steel 7 274 Deleted 274A Galvanised Spokes other than for bi-cycles 11 274B Galvanised Spokes for bi-cycles 11 Rs.85/gross 275 Generator (Dynamo) Assembly 10 276 Half Collets for engine valves 8 277 Deleted 278 Steel Hub bolts 9 279 Steel Hub cone 9 280 Ignition Coil oil filled 10 281 Ignition Coil Resin Cost 10 282 Inlet exhaust valves 5 283 Integral Shaft Water Pump bearing for automotive applications 11 284 King pin made out of alloy steel 9 285 Laminated Leaf Springs/Springs 8 286 Light Commercial Vehicle (LCV) of GVW upto 7.5 Mt in CBU/SKD/CKD condition 7 287 Machined trailor ball/hitch pin/linkage pin 10 288 Nozzles made of steel 7 289 Oil Bath Gear case 8 290 Piston Pin/ Gudgeon Pin 7 291 Push rod 9 292 Rear Axle Assembly for LCV/ HCV (Assembly/SKD) 11 293 Rocker Arm/ Rocker Shaft made of steel 10 294 Roller for auto break shoe 11 295 Shallow Well hand pump with PVC riser main pump rod, well screen, Lower casing upper casing. 9 296 Sleeve Shaft and Ball Joint 7 297 Slip Ring 6 298 Slip Stub Shaft 7 299 Solenoid Switch Pre-engaged type 9 300 Solenoid Switch Co-axial type 9 301 Spindles made of steel 7 302 Sprocket with central axle 8 303 Starter motor with maximum current upto 1100 Amps 8 304 Stator for alternator for Light Duty (12 Volts 60-95 Amps) 9 305 Submersible Water pump sets i.e. Pumps, Motors, Pumpsets Accessories thereof such as cable, control panels pipes 9 306 Valve Tappets 9 307 Voltage Regulator 5 308 Aluminium Ingots 3 309 Aluminium Sow Ingots 3 310 Aluminium Wire Bar/ Rod 3 311 Brass Washers of all types 7 312 Brass Wood Screw 8 313 Calcined Alumina 7 314 Copper flats/ Sheets/ Strips 8 315 Copper Foils 8 316 Lead Antimony Wire 10 317 Phosphor Bronze fabric 10 318 Pressure die cast article made of zinc 11 Rs.60/Kg. 319 Tin Ingots 2 320 Valve Stems made of brass 5 321 Magnetic assemblies incorporating cast alloy permanent magnets viz. pot magnets, magnetic welding clamps/ links, Magnetic lifting devices,magnetic racks/ vices/ door catches/ vee blocks bases/ hold fast 6 322 Galvanised/ungalvanised spikes for use as Railway Track material 11 323 Gear cutting tools of Cobalt bearing high speed steel 5 324 Industrial Diamond prod. Diamond Grinding wheels/ Diamond file and tools 4 325 Aluminium Pistons, in fully machined conditions 7 326 Ferro Chrome/ Charge Chrome 8 327 Ferro Manganese (Fe Mn) 8 328 Ferro Silicon (Fe Si) 9 329 Cold Rolled Galvanised Non-alloy Steel sheets/Hoops Strips/ wide coils/ Circles(Plain/ Corrugated) 12 Rs.25500/MT 330 Gas based direct reduced iron (Hot Briquetted Iron/ Sponge Iron) 5 331 Graphite Electrode/ Anode/ Nipples/ Fins/Mix Graphite products/ Graphite/ finco 11 332 High Alumina (Bubble Alumina Based) Bricks Shapes and/or Castable and Mortars 10 333 High Alumina (Synthetic Base) Bricks/Shapes and/or Ramming Mass, Castables and Mortars 10 334 High Alumina Blast Furnace Stove Bricks/ Shapes and Mortars 10 335 High Alumina Bricks and Shapes and/or Ramming Mass, Castables and Mortars 10 336 High Speed Steel (cobalt grade) bars rods/ wires/ special profiles/ flat rolled products 11 337 High Speed Steel (Non Cobalt grade) bars rods/ wires/ special profiles/ flat rolled products 11 338 Magnesia Dolomite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 11 Rs.14000/MT 339 Magnesite Chrome Magnesia Co-clinker Bricks and Shapes and/or Ramming Mass, Castables and Mortars 11 Rs.33000/MT 340 Magnesia Carbon Bricks/Shapes and/or Ramming Mass, Castables and Mortars 11 Rs.21000/MT 341 Non Alloy Steel wire Coated/ Plated or otherwise 11 Rs.30/Kg. 342 Hot rolled Galvanised Non-Alloy Steel Sheets /Hoops and strips/Wide coils (plain/corrugated) 10 343 Non alloy Steel Ingot, Billets, Blooms and slabs 10 344 Alloy Steel Wire coated, plated or otherwise. 10 Rs.35/Kg. 345 Non-Alloy Steel Bars Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed Bars, Thermo mechanically treated reinforcing Bars ), Angles, Shapes Sections (including Beams, Joints, Channels, Special Profiles), Rails and Sleepers 10 Rs.25/Kg. 346 Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 11 Rs.21000/MT 347 Silico Manganese (Si Mn) 8 348 Stainless Steel Wires 11 349 CR Stainless Steel Sheets/ Hoops Strips/ Wide Coils/Circles with/without annealing/skin passing 12 350 Hot Rolled Non Alloy Steel Plates/Wide Coils/Sheets/Hoops Strips (including skelp) 12 351 Low Carbon Ferro Chrome (Containing by weight Min 60% Chromium and Max. 1.5% Carbon) 8 352 Ferro Molybdenum (60-65% Molybdenum) 6 353 Table, Kitchen and other household articles made of Stainless Steel with or without handle/lid irrespective of what material the handle/lid may have been made of 13 Rs.135/Kg. 354 Stainless Steel Cutlery with or without handle, irrespective of what material the handle may have been made of 13 Rs.125/Kg. 355 Aluminium artware 6 356 Aluminium Circles/Slugs 7 357 11 KV, Indoor Vacuum circuit Breaker Panels 9 358 CRGO Transformer Lamination (Core Laminations) 11 Rs.40/Kg. 359 11 KV Heat Shrinkable Straight through Joints for XLPE Copper Cable size 3 x 240 sq. mm. 11 360 Cast Iron Wheel 9 361 Cold Rolled painted/ coated High Tensile steel strapping 13 Rs.29/Kg. 362 Ferrous investment Precision castings 2 363 Manhole Cover 9 364 Sanitary casting 9 365A (a) Forged Steel ball made of mild steel/non-alloy steel 11 Rs.80/Kg. 365B (b) Forged Steel ball made of alloy steel 11 Rs.100/Kg. 365C (c) Forged steel ball made of stainless steel 11 Rs.175/Kg. 366 Thermostatic type bimetal/ trimetal strip of various grades 10 367 Cast Iron Weights 9 368 Cast Iron Vice 9 369 Hacksaw Frame 8 370 Automatic Socks Knitting Machine (Mechanical) 10 371 Computerised Automatic Power Socks Knitting Machine 10 372 Hydraulic End Cap 9 373 Injection moulding machine parts: Deckel /Cover made of non Alloy Steel 9 374 Injection Piston 9 375 Plates Injection cylinder 9 376 Speed Frame Drafting System 7 377 Tail Stocks made of Steel 9 378 Textile Spindle upper part 10 379 Textile spindle with insert 10 380 Thrust housing made of Steel 9 381 Alloy Steel (other than stainless steel) Ingots, Semis (Blooms/Billets/Slabs), Bars and Rods (including Rounds, Flats, Hexagon, Octagon, Wire rods etc)., Angles, Shapes Sections (including Special Profiles), Plates, Hot Rolled Sheets/Hoops and Strips (including Skelp)/Wide Coils 10 382 Alumina Carbon Bricks/ Shapes and/or Ramming Mass, Castables and Mortars 10 383 Alumina Carbon/ Slide Gate Plate Refractory and Attachments 10 384 Alumina Fused Cast Refractories 10 385 Chrome Magnesite Bricks and Shapes and/or Ramming Mass, Castables and Mortars 11 14000/MT 386 Coal based Direct Reduced Iron (Briquetted Iron/ Sponge Iron) 5 387 Cold Rolled (including Full Hard/Half Hard/Annealed and/or Skin Passed/Temper Passed) Non-Alloy/ Alloy Steel (excluding Stainless Steel) Sheets/Hoops and Strips/Wide-Coils, including CRCA 12 DEPB Rate corrected to read as 20% w.e.f. 1/4/2003 till 9.2.2004. Thereafter DEPB rate will be 12% 388 Iron Ore pellets (from Limonite Ore) 4 389 Iron Ore Pellets. (from Haematite Ore) 4 390 Stainless Steel Ingots, Semis (Blooms/Billets/Slabs) Bars and Rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold twisted deformed bars, Thermo-Mechanically Treated Reinforcing Bars) Angles, Shapes and Sections (including Beams, Joints, Channels, Special Profiles), Plates/HR Sheets/Hoops and Strips (including Skelp)/Wide Coil 11 391 Pig Iron/Hot Metal 6 392 Alumina Carbon Continuous Casting Refractories and/or Mortars 10 393 2" Bungs with or without Washer/Gasket 10 394 2" Flanges with or without Washer/Gasket 10 395 Bolt Axle made of mild Steel 9 396 Boulevard Clamp made of Steel 11 397 Box Girders for Bridges 9 398 Clevis 11 Rs. 40/Kg. 399A Hoe Blade 8 399B Hoe Eye 8 400 Articles manufactured out of GP Sheets not elsewhere specified 9 Rs.30/Kg. 401 Articles manufactured out of Tin Plate prime quality not elsewhere specified 8 402 Postcap 8 403 Rectangular tops made of Electrolytic tin plate fitted with screw neck handle and bottoms 8 404 Round tops/ ends (bottoms) of containers made of tin plate 8 405 Rubber Wheel made of mild steel 13 406 Mild Steel Scrool 13 407 Vertical Arm made of mild steel 13 Rs.25/Kg. 408 Y Arm Made of mild Steel 13 Rs.25/Kg. 409 Slitting cutters made of mild steel 5 410 Forged Crank Shaft 10 411 Front Axle Beam Forging 10 412 Forged Crank Shaft Fully Machined (Made Of Alloy/ Non-Alloy Steel) 10 413 Front Axle Beam Fully Machined 10 414 MS Window, Doors, Ventilators, Grate, Grille, fabricated, frames and Components/ parts thereof 11 Rs.25/Kg. 415 Non Alloy Steel Flanges/ Couplings / Tees/ Elbows 9 416 Seamless Stainless Steel Tubes (Cold Finished) 11 Rs.250/Kg. 417A Fully Threaded Rod made of non-alloy steel/ mild steel(Galvanised/Ungalvanised) 12 Rs.20/Kg. 417B Fully Threaded Rod made of Alloy Steel including Stainless Steel 12 Rs.90/Kg. 418 PTFE Cables 9 419 Silica Bricks/Shapes For B.F Stoves 9 420 Silica Bricks/Shapes For Coke Ovens 9 421 Silica Mortar 2 422 Stainless steel flanges/ couplings / Tees/ Elbows 11 423 Bicycle Chains 6 424 Manganese Steel Cast Articles (Rough/machined) 9 425 Non Alloy Steel Castings Rough/Machined 7 426 Spheroidal Graphite/ Malleable/ Ductile Iron Castings (Rough/machined) 7 427 Copper Bonded Grounding Rods 9 428 Bearing Races 2 429 Carbon/Non Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise) 10 430 Alloy Steel Seamless Pipes/ Tube (Cold Finish or otherwise) 11 Rs.55/Kg. 431 Fabricated Steel Hardware/ Structure/Articles not elsewhere specified Made out of MS HR Plates/ Sheets/ Coils/Strips 7 432 Industrial Roller Chain / Motorcycles including Moped Chain/ Automotive Timing Chains ( all types including spares ) 6 433 Industrial Valves (cast or forged body) 4 434 MS Bucket Handles Duly Nickel Plated 8 435 Perforated Construction Stakes (Round/ Flat/ Square) 7 436 Printed Lug Cap With Internal Coating Lined With PVC Compound 4 437 Steel Hinges Bar Type 7 Rs.20/Kg. 438 Zinc Plated (Galvanised) Steel Lock Nuts (Blanked/Punched) from H.R.Coil/ Sheet 9 Rs.150/Kg. 439 Automotive Water Pump 4 440 Clutch Cover Assembly 4 441 Clutch Plate/Disc Assembly/Driven plate 4 442 Spline Hubs for clutch plate 4 443 Top Link Assembly for Tractors (Consisting of Tommy Bar, Replacement Ball, Replacement end, Centre Tube and Locking Collar) Galvanised 6 444 Tractor Parts Ratchet Jack Assembly 7 445 Brass Wire 9 446 Stainless Steel rough castings 10 447 Aluminium Foil Commercial Grade Embossed/Non Embossed, Cut to Shape, Preformed,with/without Coating, with/without Printing, with/without Reinforcing Material 7 448 Aluminium Foil Paper backed 8 449 Aluminium Foil Plastic Coated/ Laminated 7 450 Aluminium Foil Synthetic Resin/ Lacquer Coated Printed 7 451 Aluminium Foil Synthetic Resin/ Lacquer Coated 7 452 9 KV 5 KVA Conventional Surge Arrester Distribution Type With Mounting Breenet And Insulators 10 453 Non-Alloy Ground/ Earthing Rods (Galvanised) 10 454 Stainless Steel Cable Ties made of SS.316 Grade 2 455 Alloy Steel Castings (Rough/Machined) 7 456 Galvanised Steel Wire Strand 9 457 Anchor Bolt With Nut 7 458 Ferro Vanadium 9 459 Magnesium Ferro Silicon 11 460 Cable Ties made of Stainless Steel 2 461 Pilfer proof caps/ Seals Plain/printed with EP Liner 8 462 Pole Line Hardware fittings and Accessories (Galvanised) 10 463 Carbon steel submerged arc welded pipes as per API grade or ASIM grade or equivalent or hot formed steel bends as per API, ASTM grade or equivalent degree: 0-180 degree 11 Rs.27000/MT 464 Machined /Cold rolled/Cold Formed ring for bearing races, CV cages 9 465 CRCA butt hinges 4 466 CRCA hinges electric brass plated 4 467 CRCA hinges self colour 4 468 CRCA hinges zinc plated 4 469 TEE Hinges (painted/ zinc plated) made of steel 4 470 Transformer (copper wound) above 100 KVA upto and including 400 KVA 3 phased, oil cooled. 9 471 Transformer (copper wound) above 400 KVA upto and including 1600 KVA 3 phased, oil cooled. 9 472 Transformer (copper wound) upto and including 100 KVA 3 phased, oil cooled. 9 473 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2 mm thickness and having coating weight of 2.75 kgs +/- 5% per Sq.Mtr. 10 Rs.34000/MT 474 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 2.5 mm thickness and having coating weight of 3.15 kgs +/- 5% per Sq.Mtr. 10 Rs.34000/MT 475 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3 mm thickness and having coating weight of 3.60 kgs +/- 5% per Sq.Mtr. 10 Rs.34000/MT 476 Carbon steel submerged Arc welded pipes with 3 layer polyethylene coating of 3.5 mm thickness and having coating weight of 4.2 kgs +/- 5% per Sq.Mtr. 10 Rs.34000/MT 477 Electrical measuring instrument type: moving iron moving coil dynamo meter bymetallic reed type, namely volt meter, ammeter, frequency meter, watt meter, multimeters, insulation testers, maximum demand indictor power, factor meter 8 478 Electric door bell 8 479 Steel tapes/rules (1 meter to 50 meters) 4 480 Ceramic coated steel pipes with or without coupling 9 481 Cryogenic tanks for liquified gases 6 482 Stainless steel welded and cold drawn tubes/pipes Dia below 450 mm NB 7 483 Hi-chrome casting composition: chromium 30-32%, molybdenum 2.5-3.5%, silicon 1.5 2.5%, Carbon 1.5 2.5% balance Iron 7 484 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-14/SAE-14 3 485 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy GA- 17G/A-17X 3 486 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS- 30/KS-30/F-14/SAE/ 48/SL 3 487 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based white Metal Alloy GL-15/F-23/L-200/G-24/SAE-15 3 488 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy GS-10/ L S-10/G-46/SAE-797/SY/F-100/F-59 3 489 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper Lead Alloy of GS-23/ L.S-23/G-48/SAE-799/SX/F-250/F-7 3 490 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Tin Alloy GS-25/KS-25/SAE-49/SP 3 491 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy SL/KS/30/GS/30/F-14/SAE48/SP/KS 25/GS 25/G 41/F 770-780/H 24/F112/SAE 49/SY/F 100/HF 2/LS/F-770/SL/KS 30/GS 30/F-14 3 492 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F-770/ SL/KS30/ GS30/F-14 3 493 Deleted 494 Deleted 495 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based F-820/ F-157/TR-20/GA 20/A 20/G 74/SAE 783/AS 15/GA 17G/A 17X/A6/GA 6/A300/G73/SAE 770-780 3 496 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin BASED ALLOY GA 6/ A6/G 73A 300/SAE 770/ AS11 3 497 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed High Tin Alloy F-780/SP /H24/ GS25 /KS 25/G-41/SAE-49 3 498 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based AlloyF100/SY/HF2/ LS10 /gs10/Glyco-46/SAE/792 3 499 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Copper based Alloy F- 250/SX/HF 16 orH-116/LS-23/GS-23/ Glyco- 48/SAE-792 3 500 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-15/F-820/F-157/GA-20/A-20/G-74/TR-20/SAE-783 3 501 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium based Alloy AS-11/GA-6/A-6/G-73/A-300/SAE-770 3 502 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based white metal Alloy L-2/GL-12/W-90/ G-32/B-100/SAE-12 3 503 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead Based White Metal Alloy GM-155/GL-13/L-100/F-99/SAE-13 3 504 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy F-820 or F-157/TR-20/GA-20/A-20/G-74/SAE-783/AS-15/GA-17G/A-17X 3 505 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Tin Alloy AL-6 3 506 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Aluminium Lead Alloy F-66/ AL-6M 3 507 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Tin based Babbit Alloy to F-1/GL-12/W-90/G-38/B-100/SAE-12/L-2 3 508 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Lead based Babbit Alloy to F-23/L-200/ GL-13/L-100/F-99/SAE-13/GM-155 3 509 Thinwalled Engine Bearing Bushing and Thrust Washers in Steel backed Cast Copper based Alloy to F-112/F-77/F-770/G-41 3 510 Metallurgical coke 2 511 Chain wheel 10 512 Multispeed free wheel 8 513 Welded steel pipe 7 514 Bronze impellers for inter stream/ Thrustream pumps all types 3 515 Taper roller bearing 5 516 Sheet metal parts of sewing machine namely Shuttle Race Ring, Shuttle Driven, Face Plate Complete, Slide Plate, Tension for plate, Bobbin Case, Bobbin Winder Complete , Lifter, Thread Take Off Lever 5 517 Cast iron parts for sewing machine namely TT Cam, Shuttle Race complete, Claim Stop Motion, Crank, Needle Clamp, Feed Regulator, Feed Fork, Feed Driven Rock Shaft Crank and Feed Lifting Rock Shaft 1 518 Miscellaneous parts of sewing machine namely Roller for Regulator, Pressure Bar Thumb Screw, Pressure Foot, Feed Cam, Needle Bar Bushing, Linked Body, Stud for Link, Arm Shaft, Head Hinges, Pitman with Rod, Stand Fitting, Pitman Crank with fitting, Shuttle Hook, Centre Small Screw with Nut, Needle Plate, Pressure Bar, Screw and Nut for Feed Fork, Needle Bar, Screw and Nut for C.C Rod, Shuttle Race top spring, O/S Rock shaft 9 Rs. 60/Kg. 519 Domestic Sewing machine with standard accessories/ embroidery sewing machine/ Industrial sewing machine/ overlocking sewing machine with or without cover 3 520 Portable bag closure machine 4 521 Submersible pumps 11 522 Non alloy steel forged (machined) hammers upto 10 kgs piece wt. without handle or with handle made of steel /wood/ rubber gripped steel pipe. 8 523 Chain wheel and Crank set 9 524 Triple chainwheel and crank set 9 525 Multi Cylinder Fuel injection Pumps for Diesel Engines 8 526 Single Phase Motor 4 527 Automotive Oil filters/fuel filter/Spin on filters/oil or fuel filter assembly/canister-lub oil filter/air filter 4 528 Aluminium Alloy Billets 3 529 Identifiable ready to use machined parts/components made wholly or predominantly of carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. 6 530 Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel/Stainless Steel (not less than 90% by weight) manufactured through forging process, not elsewhere specified. 6 531 Identifiable ready to use machined parts/components made wholly or predominantly of Iron (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 5 532 Identifiable ready to use machined parts/components made wholly or predominantly of Carbon steel/Non Alloy Steel (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 4 533 Identifiable ready to use machined parts/components made wholly or predominantly of Alloy steel(0ther than Stainless Steel) (not less than 90% by weight) manufactured through Casting process, not elsewhere specified. 4 534 Identifiable ready to use machined parts/components made wholly or predominantly of Stainless Steel (not less than 90% by weight) manufactured through casting process, not elsewhere specified. 7 535 Brake Drums made of Alloy Cast Iron 10 536 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 100 KVA, upto and including 1000 KVA. 7 537 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 25 KVA, upto and including 100 KVA. 7 538 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, upto and including 25 KVA. 7 539 Single Phase Transformers (Copper Wound) Active Parts of Single Phase Transformers, above 1000 KVA, upto and including 4000 KVA. 7 540 Nut and Shaft Assembly for Automobile 5 541 Paper Punches 5 542 Truck Trailer Wheels 11 543A (a) Carbon Steel Forged Flanges 10 543B (b) Alloy Steel including Stainless Steel Forged Flanges 10 544 Electrode holder mainly made of copper or brass 6 545 Staples/ Staples in strips made of wholly galvanised steel wire 6 546 Disc Horn 10 547 Stainless Steel casseroles 4 548 Handle Bar Switch 9 549 Grip for Handle Bar 6 550 Frame and Field Assembly for Automobile Starter Motor upto 1.5 KW 12 551 Rear Axle Housing Assembly for LCV/HCV 10 552 Constant Temperature Baths 4 553 Electric Lamp Caps (Aluminium) / GLS Caps B 22 D and E 27/27 - 1000 pcs 5 554 Earth Moving Wheel having diameter not less than 25" 11 555 Sewing Machine Part - shuttle hook - Mild steel 8 556 Cold Rolled Alloy / Non Alloy Steel Hardened and Tempered Saw Blades 2 557 Electrical Wiring Accessories / Components made of Phosphors Bronze 9 558 Textile Machinery Spare Parts - Perforated Nickel Screen 1 559 PCB Routers 3 560 Electrolytic Tin Plate 13 561 Plastic Extrusion Plant and Machinery 7 562 Automotive Locks other than Ignition Locks 8 Rs.700/Kg. 563A Automobile Ignition Locks for cars 13 Rs.3000/Kg. 563B Automobile Ignition Locks for two wheelers 11 Rs.525/Kg. 564 Aluminium Oxide Resin Disc 4 Rs.8/Piece 565 Endless coated Zircon Cloth Belts 9 Rs. 330/sq.mt. 566 Non-Cast Hardware Fittings made of Stainless Steel Rod, Grade 304 7 Rs.350/Kg. 567 FTL Caps 8 Rs.350/Kg. 568 Vetrified Grinding Wheel 5 569 PCB Drills made from Solid Tungsten Carbide Blanks/Rods of Dia 0.2 mm-6.5 mm 8 570 Hypodermic Needle Disposable 4 571 Spheroidal Graphite Quality/Steel quality Alloy IC quality/ICDP quality/High Chrome quality Rolls for Rolling Mills. 10 572 Watch Dials made out of Nickel Silver Brass Strip Published 11 Rs.27/Piece 573 Steel Cops/Pirn/Bobbins 10 Rs.56/Kg. 574 Hermetically Sealed Compressor for Air Conditioners using R-22 refrigerant gas having cooling capacity -K Cal3400 +/- 5% /4790+/-5% /5214+/-5% /6350+/-5% per hour 10 Rs.5000/Piece 575 Agricultural Sprinkler mainly made of Brass 3 576 Earth Moving Wheel components---Gutter Band 11 Rs.80/Kg. 577 Earth moving wheel----Detachable Flange 9 578 Chrome/Nickel Plated wire wheel for all types of car 9 579 Shock Absorber 6 580 Power take offs/clutches 2 581 Shoulder Bolt made out of CHQ alloy steel/Stainless Steel 4 Rs.800/Kg. 582 Dowell Pin made out of CHQ alloy steel/Stainless Steel 8 Rs. 400/Kg. 583 Single Cylinder Pump for Diesel Engine 9 Rs.1150/Kg. 584 Nickel Screen 1 585 All Aliminium Alloy Conductor 9 586 Auto Parts Double Brake Chamber Type 24 L/S 8 Rs.750/No. 587 Auto Parts Brake Chamber Type-16 L/S, Type-20 L/S, Type 24 L/S, Type 30 L/S, Type 30 S/S 8 Rs. 375/No. 588adhoc Hermetically Sealed Compressor for Refrigerators Commercial Refrigeration Applications using eco-friendly gases. 10 Rs. 1200/Pc. valid for 6 months from the date 4.2.04 applicable to M/s. Tecumseh Products (I) Ltd., M/s BPL Compressors Ltd., Hyderabad only 589 Textile Machinery Continuous open with Chainless Mercerising Machine 10 Rs.700000/No. 590 Zinc Concentrates 3 591 Tube Forming Rolls 4 592 Diffuser and parts thereof 5