Home Notifications 1992 Customs Customs - 1992 Customs -Tariff Miscellaneous Exemption Notifications This
Forgot password New User/ Regiser ⇒ Register to get Live Demo
Specified Goods falling within one or more Chapters Imported for Manufacture of Specified Goods - G.E. No. 193B - 172/92 - Customs -TariffExtract Specified Goods falling within one or more Chapters Imported for Manufacture of Specified Goods - G.E. No. 193B Notification No. 172/92-Cus. Dated 30-4-1992 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods specified in column (3) of the Table hereto annexed and falling within one or more Chapters of the First Schedule to the Customs Tariff Act, 1975 (51 of 1975), specified in the corresponding entry in column (2) of the said Table, when imported into India for the purpose of manufacture of the goods specified in the corresponding entry in column (4) of the said Table, from so much of the duty of customs leviable thereon which is specified in the said First Schedule, as is in excess of the amount calculated at the rate of 35 per cent ad valorem , subject to the following conditions, namely :- (i) an officer not below the rank of a Joint Director in the Department of Electronics of the Government of India or a Joint Director in the Directorate of Industries of the Government of a State or an Additional Industrial Adviser in the Directorate General of Technical Development of Government of India, as the case may be, is satisfied that the goods in question are required for the purpose as specified in column (4) of the said Table and recommends grant of the above exemption : Provided that this condition shall not apply in the case of goods imported against supplementary import licences; (ii) the importer shall, by the execution of a bond in such form and for such sum as may be specified by the Assistant Collector of Customs, bind himself to pay, on demand, in respect of such goods as are not proved to the satisfaction of the Assistant Collector of Customs to have been used for the said purpose, an amount equal to the difference between the duty leviable on such imported goods but for the exemption contained herein and that already paid at the time of importation. TABLE S. No. Chapter of the First Sche dule to the Customs Ta riff Act, 1975 Description of goods For the manufacture of goods (1) (2) (3) (4) 1. 28 Silicon Monoxide Lumps Liquid Crystal Displays, metal film resistors. 2. 47 Bleached or unbleached Sulphide paper pulp or wood pulp Paper Cones for Louds-peakers. 3. 28, 29, 38 (i) Electrolyte (ii)Caplyte Etched or Formed Aluminium Foil, Electrolytic Capacitors. 4. 81 Indium Electronic Grade Indium. 5. 37 Photo Polymer Film Semiconductor Devices, Printed Circuit Boards, Liquid Crystal Displays, Lead Frames, Resistors (other than Heating Resistors). 6. 28, 32 (i) Ferric Oxide of purity of 99% (ii) Manganese Oxide of purity of 99% and above (iii) Manganese Dioxide of purity of 99% and above (iv) Manganese Carbonate of purity of 99% and above (v) Manganous Oxide (vi) Nickel Oxide (vii) Strontium Carbonate Ferrites. 7. 28 Chromium di-oxide Magnetic Inks or Magne-tic Tapes. 8. 28 (i) Silicon Tetrachloride (ii) Palladium Chloride Semiconductor Devices. 9. 28 Ammonium Pentaborate Electrolytic Capacitors. 10. 81, 85 Bismuth-Cadmium alloys in all forms Semiconductor Devices. 11. 28 Barium Carbonate of purity of 98% and above Ceramic Capacitors, Electronic valves and tubes. 12. 32, 38 (i) Internal Dag (ii) External Dag Electronic Valves and Tubes, Resistors (other than Heating Resistors). 13. 74 Berrylium Copper Foil Magnetic Sound Heads. 14. 38, 39 Chalk loaded Epoxy Resin Magnetic Heads, Tape Deck Mechanisms, Deflection Components. 15. 48 (i) Electrolytic Capacitor/ Condenser Tissue paper (ii) Plain/single or double Metallised Capacitor, Tissue paper Electrolytic Capacitors, Plastic Film Capacitors, Mixed Dielectric Capacitors. 16. 76 Etched or Formed Alumin-ium Foils Electrolytic Capacitors. 17. 39 (i) Plain plastic films (other than Polystyrene film) of thickness 12 microns or below (ii) Metallised plastic films of thickness 12 microns or below (iii) Plain Polystyrene film Plastic Film Capacitors, Mixed Dielectric Capa citors. 18. 39, 69, 73 The following substances in any form with or without tags : (i) Phenolic/Polyamide/ SRBP (Synthetic Resin Bonded Paper) Substrates (ii) Enamelled steel substrates (iii) Glass epoxy unclad substrates (iv) Metal clad substrates (v) Ceramic/Alumina subs-trates Potentiometers, Hybrid microcircuits, Printed components, semicon ductor devices. 19. 71 Silver alloy strips in coils of width upto 0.434 inches and thickness upto 0.006 inches Relays, connectors, switches. 20. 39 (i) Synthetic polyelectrolyte dispersant (ii) Polyethylene adduct and non-ionic surface acting material (ZUSOPLAST) lubricant Ferrites. 21. 74 Electrolytic tough pitch (ETP) Copper wire and wire rods Lead wire for electronic components, resistors (other than heating resistors), potentiome-ters, capacitors. 22. 74 (i) Solder plated brass strips upto 100 mm width (ii) Silver plated brass strips upto 100 mm width Potentiometers, connec-tors, switches, relays. 23. 39 (i) (a) filled, Flame retardant moulding powder/ granules and with Nylon 6.30% glass or without other addi tives Potentiometers, Connec tors, Tape Deck Mecha nisms. (b) Plain and glass filled nylon/polyamide with or without other additives. Relays, connectors, switches, potentiometers, tape deck mechanisms. (ii) Injection mouldable grade polyester moulding powder/compound with or without fillers or other additives Potentiometers, Tape Deck Mechanisms. 24. 28, 29, 39, 71, 74, 76 (i) Titanium dioxide of purity of 99% and above (ii) Reactive alumina super ground (iii) Neodymium oxide (iv) Liquidising binders (v) Aluminium powders of purity of 99% and above (vi) Aluminium foil (Adhesive coated) for thermal bonding (vii) Copper band, silver plated/solder coated (viii) Furoic acid Piezoelectric elements, transducers. 25. 15, 29, 32, 34, 39, 48, 70 The following items : (i) Alpha cellulose paper/ cotton paper (ii) Electrical grade craft paper (iii) Tung oil (iv) Volan/Silane treated glass fabric/cloth (v) Silane (vi) Glass filament yarn for silane treated glass cloth Copper clad laminates phenolic or paper phenolic or glass epoxy types, printed circuit boards. 26. 48, 59 (i) Silicone coated paper roll (ii) Pressure sensitive felt Cassettes, cassette parts. 27. 59 Felt sheet (fully compress-ed) of 1.5 mm thickness and below Tape deck mechanisms. 28. 32, 35,39, 40, 74,76, 85 (i) Posyn wire, thermoplac wire (ii) Cellulose triacetate foil (iii) Cellulose acetate buty rate foil (iv) Copper-cadmium brai ded wire (v) Self-soldering/ self-bon-ding aluminium wire Loudspeakers, micropho-nes. 29. 39, 71, 74 (i) Gold plated twisted wire upto 0.4 mm dia (ii) Tin plated copper wire upto 0.4 mm dia (iii) Epoxy solder glue Delay lines. 30. 72, 73, 74, 76 (i) Iron of 99.7% purity and above (ii) Copper of 99.9% purity and above Cast Alloy Permanent Magnets, when imported by the manufacturers of such magnets and DC micromotors of voltage upto 13.5V and not exceeding 20 watts rating. 31. 28, 38, 39, 70, 74, 76 (i) Aluminium paste (ii) Ethylene vinyl acetate sheets (EVA) (iii) Primer for EVA (iv) Polyvinyl fluoride (TE-DLAR) (v) Tedlar Aluminium Te-dlar (vi) Crane glass (vii) Tedlar coated alumin-ium sheet (viii) Phosphorous Oxychlo-ride (ix) Halo carbon (CF 4 )/ Freon gas (x) Tinned copper mesh inter connect (xi) Toughened glass with low iron content and transmissivity of mini mum 90% and above. Solar cells/modules. 32. 39, 71, 76, 78, 85 (i) Glue solvent resin in aliphatic alcohol (ii) Platinum Rhodium wire (iii) Aluminium wire with silicon or magnesium impurity of upto 2% (iv) Gold wire with phosphorous or antimony doping (v) Base solder (silver, lead, antimony based) (vi) Soft solder (lead, indium, silver based) (vii) Gold tin alloy (viii) Preforms, discs, dots, rings, wafers, plates, repartitors of the following materials : (a) Aluminium silicon (b) Gold boron (c) Molybdenum (d) Lead-tin solder (e) Silver antimony (f) Gold antimony (g) Silver Lead Indium (h) Silver Lead Antimony (i) Silver Lead Silicon Anti-mony (j) Solder (k) Lead Tin (l) Silver-Copper-Indium (m) Silver-Copper-Germani-um Arsenic (n) Berrylium Oxide Semiconductor devices. 33. 78 Lead foil Plastic film capacitors. 34. 85 Insulated or enamelled copper wire of 45 SWG or finer than 45 SWG Deflection components, Coils and transformers. 35. 74, 85 (i) Oxygen-free high con ductivity (OFHC) copper wires, bars, rods, angles, shapes and sections, plates, sheets, strips, tubes and pipes (ii) Parts made of oxygen free high conductivity copper Semiconductor devices, electronic valves and tubes, transistor headers, glass to metal seals, capacitors, resistors (other than heating resistors), Lead frames. 36. 28, 38 Carbon powders, carbon black or carbon suspensions (like Corax L Sevacarb MT and AB carbon) in packings not exceeding 25 kg. Potentiometers, switches, magnetic tape. 37. 74 Continuous cast electrolytic grade copper wire-rods of purity of 99.9% and above Electrodeposited copper foil for copper clad laminates. 38. 28, 38 Organic additives Electrodeposited copper foil for copper clad laminates. 39. 28, 29, 32, 38, 39, 71 (i) Ethoxy ethanol (ii) Polyvinyl butyral (iii) Molybdenum disul phide (iv) Molybdenum dioxide (v) Xylok 225 (vi) Terpinol Potentiometers, ceramic capacitors. 40. 29 Ethylene glycol monomethyl ether or its formulations Semiconductor devices. 41. 28, 29, 35, 25, 38 (i) Sorbitol flux (ii) Hydroxy Propyl methyl Cellulose (iii) Vegetable glue (iv) Preventol (v) Rhodovial (vi) Aluminium oxide Ceramic capacitors, Cera mic substrates/rods. 42. 28, 29 (a) Triethanalamine (b) Dimethyl formamide (c) Dimethyl acetamide (d) Dimethylamine Etched or formed aluminium foil for electrolytic capacitors. 43. 85 Parts of Electron Guns excluding beaded body Electron Guns Television picture tubes or Cathode Ray Tubes. 44. 28, 68 (i) Tantalum Neodyme oxide (ii) Neodyme oxide (iii) Strontium carbonate Ceramic Capacitors. 45. 29, 39 (i) Ethane VG (Trichloro ethane) (ii) Diaflon (Trichlore trif luro ethane) Deflection components. 46. 29 Tetrahydrofuran Magnetic tapes. 47. 73 Copper clad tin coated steel wire, dia 0.4 mm to 1.2 mm Lead tabs for electrolytic capacitors. 48. 39 Polyphenylene oxide (Flame retardant) resin Deflection components, Capacitors. 49. 39 Emcol Witconate Magnetic tape. 50. 28, 31, 70, 74 (i) Suspension of Aluminium oxide in binder (ii) Suspension of Tungsten Powder and Aluminium oxide in binder (iii) Tungsten Rhenium Wire (iv) Triple Carbonate susp-ension of calcium, barium, strontium in binder Electron guns and electron gun parts. 51. 74, 85 OFHC Copper base with weldable steel ring Semiconductor devices. 52. 76 Plain Aluminium Foil containing more than 99% Aluminium Etched or Formed Alumi-nium Foil Electrolytic capacitors or plastic film capacitors. 53. 70, 85 Fused Quartzware Semiconductor Devices, Halogen Lamps or Silicon in all forms. 54. 81 Tantalum Powder Tantalum Capacitors. 55. 32, 70, 85 (i) Glass frit or Glass Powder (ii) Glass preforms or pellets (iii) Glass Tubes Liquid Crystal Displays, Semiconductor Devices, Electronic Valves and Tu bes, Glass to Metal Seals, Lead Frames, Transistor Headers, Reed Relays or Reed Switches, Delay Lines, Resistors (other than Heating Resistors), Mounted Piezoelectric Crystals, Capacitors, Con nectors, Hybrid Micro circuits, Printed Compo nents, Electron guns and electron gun parts. 56. 39, 85 (i) Silicone rubber (ii) Parts/articles of silicone, Elastomer or Silicone rub ber Solid Tantalum Capaci tors, Liquid Crystal Dis plays, Semiconductor De vices, EHT Transformers, Potentiometers, Electro lytic Capacitors, keypad switches. 57. 39 Silicone based resins, oils, varnishes, lacquers, elasto-mers, with or without additives Capacitors, Semiconduc tor Devices, Liquid Crys tal Displays, Electronic Valves and Tubes, Resis tors (other than Heating Resistors), Loudspeakers, Compass, Tape Deck Me chanism, Deflection Com ponents, Connectors, RF/ IF Coils or Transformers, Magnetic Tape, Relays, Potentiometers, Switches, Capacitor grade meta llised plastic film, piezo electric crystal, Hybrid Microcircuits. 58. 28, 29, 38, 39 (i) Epoxy/Epoxide resins, compounds or encapsul-ants (ii) Fillers, thinners, hard ners, accelerators and fire retardants Capacitors, Semiconduc-tor Devices, Liquid Cry stal Displays, Electronic Valves and Tubes, Swi tches, Relays, Copper clad laminates of glass epoxy/ paper epoxy type, Delay lines, Electronic Tuners, Line and Wave Traps Potentiometers, Silicon Crystals or Silicon wafers, Connectors, RF/IF coils or Transformers, Resistors (other than Heating Resi stors), Deflection compo nents, Loudspeakers, Ma gnetic Heads, DC Micro motors, Paper Cones/ Spiders/Dust Caps for Loudspeakers, Piezo electric Crystals, Hybrid Micro-circuits, Printed Components. 59. 39 Daillyl Phthalate (DAP) Moulding powder or compound, plain or glass filled with or without other additives Connectors, Switches, Potentiometers, Resistors (other than Heating Resistors), RF/IF Coils or Transformers, Relays. 60. 75, 85, 90 Nickel and Nickel Alloys wrought in all forms and articles thereof Capacitors, Semiconduc-tor Devices, Liquid Cry stal Displays, Electronic valves and tubes, pickup cartridges, Stylii, X-Ray Tubes, DC Micromotors of voltage rating upto 13.5 volts and not exceeding 20 watts rating, Cast Alloy Permanent magnets, Swi tches, Relays, Transistor Headers, Glass to metal seals, Lead frames, Resis tors (other than Heating Resistors), Magnetic Hea ds, Mounted Piezoelectric crystals, Potentiometers, Connectors, Hybrid Mic rocircuits, Printed Com ponents, Electron guns and Electron gun parts, Coils and transformers. Electromagnetic shields, metallised ceramic rods, Encoders and synchros. 61. 81, 85 Tantalum, wrought, in all forms and articles thereof Solid Tantalum Capaci-tors, Electronic Valves and Tubes, Resistors (other than heating resistors). 62. 81, 85 Molybdenum and Moly bdenun alloys, wrought, in all forms and articles and parts thereof Electronic Valves and Tubes, X-Ray tubes, Semi conductor Devices, Resis tors and Resistive Arrays (other than Heating Resis tors), Mounted Piezo electric Crystals. 63. 81, 85 Tungsten and Tungsten alloys, wrought, in all forms and articles thereof Electronic Valves and tubes, Semiconductor De vices, Resistors and Resi stive arrays (other than Heating Resistors), Mou nted Piezoelectric Cry stals, Silicon in all forms, Metallised ceramic rods. 64. 39 Polyvinyl Alcohol Ferrites, Capacitors. 65. 39 Polyisobutylene Ferrites, Deflection com ponents. 66. 39, 40 Chlorosulphonated Polyethylene (HYPALON) Ferrites, Deflection com ponents, Capacitors. 67. 74 Phosphor Bronze Sheets/ bars/sections/flats/strips/ wire/rods/coils/pipes, with or without plating Relays, Semiconductor de vices, Tape Deck Mecha nisms, Connectors, Mag netic Sound Heads, Mou nted Piezoelectric Crys tals, Potentiometers, Heat Sinks, DC Micro-motors upto 13.5 volts and not exceeding 20 watts rating, cassettes, parts of casse ttes, T.V. tuner, telescopic antenna. 68. 72, 73 (i) Kovar Alloys in all forms (ii) Nickel Iron Cobalt Alloy in all forms Semiconductor Devices, Electronic valves and tubes, Transistor Headers, Glass to Metal Seals, Lead Frames, Cast Alloy Permanent Magnets, Mou nted Piezoelectric Cry stals, Hybrid Micro circuits, Potentiometers, Resistors (other than heating resistors). 69. 80 Tin foil or Tin Alloy Foil Plastic film capacitors, Mixed Dielectric capa citors, Resistors (other than Heating Resistors), Mica Capacitors. 70. 76 Aluminium of purity 99% or above in the form of wire, strips, sheets, rods, bars, pipes, plates, sections, ribbons or shapes Cans or Leads for Elec trolytic Capacitors, Semi conductor Devices, Capa citors, Deflection Compo nents, Capacitor grade Metallised Plastic films, Connectors, Relays, Swi tches, Potentiometers, Disc covers for electrolytic capacitors. 71. 39 Copolymerised Vinyl Chloride, Vinyl Acetate and Vinyl Alcohol Magnetic Tapes, Ferrites. 72. 81 Cobalt Cast Alloy Permanent Magnets. 73. 74 Beryllium Copper rods/ strips/sheets/wire/foils with or without plating Connectors, Relays, Switches, Potentiometers, Tape deck mechanisms. 74. 75 Nickel, unwrought Cast alloy permanent magnets. 75. 28, 38 Silica Quartz Fillers (including AEROSIL, MINOSIL and CELITE) Potentiometers, Switches, Connectors, Relays, Mica capacitors. 76. 79 Zinc wire of purity of 99.9% and above Plastic film capacitors, mixed dielectric capaci-tors. 77. 39 Double metallised plastic film Plastic film capacitors, mixed dielectric capa citors. 78. 40 Elastomers/rubbers : (i) Polychloprene (neoprene) (ii) Butadiene acrylonitrile polymer (HYCAR) Tape deck mechanisms, magnetic tape, capaci-tors, DC micromotors upto 13.5 volts and not exceeding 20 watts rating. 79. 39 Polypropylene moulding powder/granules Plastic film capacitors, Deflection components, Cassettes, Loudspeakers, Microphones. 80. 39 Phenolic moulding pow der/resin with or without fillers Capacitors, potentiomet-ers, relays, switches, con nectors, Hybrid Micro circuits, printed compo nents, cones, spiders and dust caps for louds peakers, Resistors (other than heating resistors). 81. 39 Polybutyl terephthalate Connectors, deflection components, switches, relays. 82. 39 Special purity nitrocellulose based binding solution Semiconductor devices. 83. 39 Polysulphone moulding powder Deflection components. 84. 39, 40 (i) Polyphenelene sulphide (ii) Polyaryl sulphone Tape deck mechanisms, switches, connectors. 85. 39, 56 (i) Polyvinyl chloride film/ sheet (ii) Non-woven cloth or liner (iii) Polyester liner (iv) PVC glue Floppy disks/diskettes, Floppy disk jacket, Head cleaning diskette. 86. 28, 38, 39, 75, 80 (i) Gold plating make up and replenisher solutions and salts (ii) Resins for gold recovery Semi Conductor Devices, Capacitors, Electronic val ves and tubes, Connec tors, Relays, Switches, Potentiometers, Loud speakers, Printed circuit boards, Glass to metal seals, lead frames, Headers. 87. 29 (i) Polyethylene Glycol (ii) Xylol (iii) Cyclohexanone Ferrites, capacitors, mag netic tape. 88. 39 Polymide coatings or adhesives Semiconductor devices, Heat sinks, connectors, switches, tape deck mechanisms, relays, pote ntiometers, deflection components. 89. 28, 39 Cellulose acetate/Cellulose triacetate foil or film in roll/Strip sheet Capacitors, semicondu-ctor devices, mounted pie zoelectric crystals, delay lines. 90. 39 Plain plastic film of thickness of 12 microns or below Electronic capacitor gra-de metallised dielectric plastic film. 91. 39 PTFE resin PTFE insulated wires and cables for electronic indu stry.
|