Nil duty or 5% duty on specified goods when imported into India for use in the manufacture of the finished goods - 25/1999 - Customs -Tariff

Nil duty or 5% duty on specified goods when imported into India for use in the manufacture of the finished goods Notification No. 25/99-Cus 28th February, 1999 In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), the Central Government, being satisfied that it is necessary in the public interest so to do, hereby exempts the goods specified in column (3) of Table below, 1 [and falling under the Chapters or heading or sub-heading or tariff items of the First Schedule] to the Customs Tariff Act, 1975 (51 of 1975) specified in the corresponding entry in column (2) of the said Table, when imported into India for use in the manufacture of the finished goods specified in the corresponding entry in column (4) of the said Table, from so much of that portion of the duty of customs leviable, thereon which is specified in the said First Schedule, as is in excess of the amount calculated at the rate of,- (a) Nil in the case of the imported goods specified in List A; and (b) 5% ad valorem in the case of the imported goods specified in List B; Provided that the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty for Manufacture of Excisable Goods) Rules, 1996. 39 [ Provided further that nothing contained in this notification shall apply after 158 [ 31st March, 2029 ] . ] TABLE LIST A S.No. Chapter or Heading or Sub-heading or tariff item Description of imported goods Description of finished goods (1) (2) (3) (4) 1. 15, 29, 32, 34, 39, 48, 70 Alpha cellulose paper/cotton paper; Electrical grade kraft paper; Tung oil; Volan/Silane treated glass fabric/cloth Copper clad laminates-phenolic or paper phenolic or glass-epoxy types; composite type copper clad laminates; printed circuit boards. 40 [ 2. * ** * ] 40 [ 3. * ** * ] 4. Omitted 40 [ 5. * ** * ] 40 [ 6. * ** * ] 7. 28, 29, 38, 76 Cadmium sulphide; cadmium telluride; silicon dioxide; cadmium chloride; zinc telluride; indium; germane; disilane; phosphine; hydrogen fluoride; aluminium sputtering target; zinc oxide sputtering target; adhesive coated aluminium foil; high purity hydrogen; high purity nitrogen; high purity argon; copper doped graphite paste; high purity methane; diborane in high purity helium Solar cells/modules. 8. 28, 29, 32, 38, 39, 68,74 Copper plating salts, their brightners, levellers, conditioners, replenishers, stabilizers; Black 74 Oxide Coating (Microtech) solution/salts, predip solution/salts, palladium catalyst solution/salts Printed Circuit Boards. 9. 28, 29, 32,38, 71 Resistive, Conductive, Di-electric, Overglaze or solder pastes, compositions or inks in packing not exceeding 20 kg. 41 [ Conductive Rubber Switches/Key Boards. ] 10. 28, 29, 32, 39, 48, 69, 74, 85 Ceramic bodies (coated or uncoated); bandoliering tape with or without adhesives; solder plated copper wire of dia upto 1 mm; solder plated brass wire of dia upto 1 mm; high melting point solder alloy; paper backed polyurethane tape; epoxy marking ink with or without hardner/thinner Thermistors; ceramic capacitors; Resistors (other than heating resistors) 42 [ 11. * ** * ] 42 [ 12. * ** * ] 43 [ 13. 28, 29, 37, 39, 68, 70, 71, 80, 81, 82, 85 (a) Photo resist and associated thinners or/and developers; photospin glass; (b) Photo Polymer Film; (c) High Resolution Photo Plates; Photomask Substrates; (d) High resolution photo mask; (e) Plastic Film for Wafer Dicing; Graphite Jigs / Block/ Rods / Plates; Dicing blades / wheels; Tungsten filament and or parts thereof; Tungsten Wire / Rod; Colour Paste and Diffusants; Silver conductive paste / Suspension; Palladium Wire; n- Butyl Acetate; Bonding Tools; (f) Phosphoric acid (MOS/CMOS, electronic grade); Hydrogen peroxide (MOS/CMOS, electronic grade); (g) Tin silver antimony alloy in any form; (h) Buffered Oxide Echants; (i) HDPE; LDPE; Poly propylene; LED Displays, Liquid Crystal Displays. ] 14. 28, 29, 38 Electrolyte 44 [ Etched or Formed Aluminium Foil. ] 45 [ 15. * ** * ] 16 28, 29, 38, 39 Epoxy/Epoxide resins/Epoxy moulding powder , compounds orencapsulants; Fillers, thinners, hardeners, accelerators and fire retardants 46 [ Liquid Crystal Displays; Switches; Copper clad laminates of glass epoxy/paper epoxy type; composite type copper clad laminates; Delay lines; Line and Wave Traps; Connectors; Loudspeakers; Paper cones/ Spiders/Dust caps for Loudspeakers; Printed parts, Relays. ] 47 [ 17. 25, 28, 32, 39, 40, 69, 73, 85 (a) Ferric Oxide of purity of 99% and above; Manganous manganic oxide with manganese content 71% or above; Manganese di-oxide of purity of 99% and above, Manganous Oxide; Nickel Oxide; Strontium Carbonate; (b) Polyvinyl Alcohol, Polyisobutylene, Chlorosulphonated/Chlorinated Polyethylene; (c) High speed spindles of more than 10,000 RPM; silicon carbide hollow heating rods, with or without perforations; Heating coils (made of kanthal wire suitable for 13750 C dia 1 mm); Cobalt oxide (99% pure); Conveying trays (335 X 340 X 30 mm Alumina / cumulite); Setting batts (320 X 320 X 15 mm alumina / cumulite); Alumina sandwiched silicon carbide plate (340 X 170 X 15 mm alumina / cumulite); Magnesium oxide; Cupric oxide; Miraflow-A (polycarbon acid); Chloropolyethylene (CPE); Temperature measuring rings 154 [ Ferrites; Pre-calcined Ferrite Powder. ] ] 18. 28, 38, 39, 70, 74, 76 Aluminium paste; ethylene vinyl acetate sheets (EVA); primer for EVA; Crane glass; tedlar coated aluminium sheet; phosphorous oxychloride; halo carbon (CF 4 )/Freon gas; 159 [ **** ] multilayered sheets with tedlar base; fluro polymer resin; ultra high purity (UHP) silane in UHP nitrogen; UHP silane; diborane in UHP silane; MOCVD grade phosphine in UHP silane; silver sputtering target; high purity tin tetrachloride; nitrogen trifluoride of 99% purity and above Solar cells/modules. 48 [ 19. 28, 32, 39, 68, 73 (a) Blue steel lapping carriers/lapping carriers; lapping vehicles; lapping abrasive powder; lapping compound; (b) Polyurethane lapping pads Connectors; Switches; Relays; DC micromotor upto 13.5 V not exceeding 20 Watt rating; Silicon in all forms, LED lamps and displays. ] 49 [ 20. * ** * ] 49 [ 21. * ** * ] 49 [ 22. * ** * ] 49 [ 23. * ** * ] 49 [ 24. * ** * ] 25. 29 Tetra Bromo Bisphenol-A; Tricresyl/Aryl Phosphate Copper clad laminates for Printed Circuit Boards. 50 [ 26. * ** * ] 50 [ 27. * ** * ] 28. 32, 35, 39 Silicone based resins, oils, varnishes, lacquers, elastomers, with or without additives 51 [ Liquid Crystal Displays; Connectors; Relays; Switches; Capacitor grade metallised plastic film. ] 52 [ 29. * ** * ] 30. 32, 38 Screen printing inks, dyes, emulsions, lacquers films (including sensitisers, hardners, catalysts) 53 [ Printed parts; Coils; Inductors. ] 54 [ 31. * ** * ] 32. 35, 39 Polyamide coatings or adhesives 55 [ Heat sinks. ] 56 [ 33. * ** * ] 56 [ 34. * ** * ] 56 [ 35. * ** * ] 56 [ 36. * ** * ] 56 [ 37. * ** * ] 38. 11 [ 38,39,76 or Any other Chapter ] Polyvinyl flouride (TEDLAR); Tedlar 12 [ Aluminium Tedlar; Toughened Glass; Silver paste ] Solar cells/modules. 57 [ 39. * ** * ] 57 [ 40. * ** * ] 57 [ 41. * ** * ] 42. 39 Glass epoxy or/and polyamide prepregs 58 [ Copper clad laminates. ] 43. 39 Silicone rubber Keypad switches; parts of EHT transformers. 59 [ 44. * ** * ] 45. 39 Nylon 6.30% glass filled, flame retardant moulding powder/granules and with or without other additives 60 [ Connectors; Parts of relays/switches/connectors. ] 46. 39 Plain and glass filled nylon/polyamide with or without other additives 61 [ Relays; Connectors; Parts of relays/switches/connectors. ] 62 [ 47. * ** * ] 48. 39 Polybutylene terephthalate 63 [ Connectors; Switches; Relays; Parts of relays/switches/connectors. ] 64 [ 49. 39, 71, 72 (a) Heat shrinkable PVC sleeving, tubing, film or ring; (b) Pelladium copper contact tapes; (c) Soft magnetic iron strips Relays. ] 65 [ 50. * ** * ] 65 [ 51. * ** * ] 52. 39 Plain plastic film (other than Polystyrene film) of thickness 12 microns or below Explanation :-For the removal of doubt, plain plastic film includes Biaxially Oriented Polypropylene (BOPP) film Electronic capacitor grade metallised dielectric plastic film. 66 [ 53. * ** * ] 66 [ 54. * ** * ] 66 [ 55. * ** * ] 56. 39, 48, 59, 85 Insulating/taping material (including pocket carrier tape) in tape, roll or strip form with or without adhesive 67 [ Inductors. ] 68 [ 57. 39, 48, 72, 76, 85 (a) Domes or Dust caps; Paper/Plastic cones; (b) Kraft paper/tissue paper or aluminum foil for voice coil; (c) T-yoke Loudspeakers. ] 69 [ 58. * ** * ] 69 [ 59. * ** * ] 60. 39, 69, 73, 85 Ceramic/alumina substrates 70 [ Printed parts. ] 71 [ 61. * ** * ] 62. 39, 74, 76 Copper clad laminates laminated to nylon, teflon, polyester; Aluminium clad entry foil and back up laminates Printed Circuit Boards. 72 [ 63. * ** * ] 72 [ 63A. * ** * ] 64. 39, 85 Parts/articles of silicone, Elastomer or silicone rubber 73 [ Liquid Crystal Displays; EHT Transformers. ] 74 [ 65. 39, 74, 85 (a) Formers, bases, bobbins; Holders, brackets; Shielding cases, cans; (b) Rayon or Silk cover Litz wire of the following sizes (i) 6, 8, 12 and 24 strands with each strand diameter 0.03 mm; (ii) 6 or 9 strands with each strand diameter 0.04 mm RF/IF coils or transformers. ] 75 [ 66. * ** * ] 67. 40, 84, 85 Parts of Rotor Assembly; Commutator assembly or parts thereof; Brush assembly or parts thereof DC Micromotors upto 13.5 volts and not exceeding 20 watts rating. 76 [ 68. * ** * ] 76 [ 69. * ** * ] 76 [ 70. * ** * ] 76 [ 71. * ** * ] 72. 69, 78, 85 Headers; Caps with or without leads; Cans with or without leads; Pins; Stud seals; Lead beads; Ceramic beads; Ceramic-glass packages; Cap to Lead Assembles; Ceramic Pipes; Lead frames, single or in roll form; Housings; Brass ring 77 [ Connectors; Printed parts. ] 78 [ 73. * ** * ] 78 [ 74. * ** * ] 75. 70 Glass filament yarn Silane treated glass cloth/fabric for use in the copper clad laminates. 76. 32, 70, 85 Glass frit or glass powder; Glass preforms or pellets; Glass tubes 79 [ Liquid Crystal Displays; Reed relays or Reed switches; Delay lines; Gas discharge tubes. ] 80 [ 77. * ** * ] 80 [ 78. * ** * ] 21 [ 79. Omitted ] 25 [ 80. * ** * ] 80 [ 81. * ** * ] 80 [ 82. * ** * ] 81 [ 83. 72 (a) CRNGO silicon steel strip /sheet/coil/hoop with or without tin plating (b) Coated/uncoated electro-galvanised CRCA/ mild steel/ stainless steel in the form of sheet / strip /wire/coils DC Micromotor. ] 82 [ 84. * ** * ] 85. 72, 73 Iron of 99.7% purity and above Cast Alloy Permanent Magnets, Relays 86. 72, 73, 75, 81 Nickel iron Cobalt Alloy in all forms 83 [ Cast alloy permanent magnets; Gas discharge tubes. ] 87. 72 or 73 Copper clad tin coated steel wire, dia 0.4mm to 1.2 mm/solder plated Copper covered steel wire (SPC) 84 [ Lead tabs for electrolytic capacitors. ] 88. 73, 85 Metal clad substrates in any from with or without tags 85 [ Printed parts. ] 89. 74 Electrolytic Tough Pitch (ETP) Cooper wire rods Lead wire for electronic parts. 90. 74 Solder plated/unplated brass strips upto 100 mm width; Silver plated brass strips upto 100 mm width. Potentiometers/parts of potentiometers; connectors/parts of connectors; switches/parts of switches; relays/parts of relays. 21 [ 91. Omitted ] 92. 74 Beryllium Copper rods/strips/sheets/ wire/foils with or without plating; Rectangular Profile Brass material (CuZn 39 Pb2) Connectors/parts of connectors; relays/parts of relays; switches/parts of switches; gas discharge tubes/parts of gas discharge tubes. 93. 74 Tin coated/solder plated copper wire Resistors, Capacitors, Deflection, Components, Thermistors, Varistors 22 [sub-miniature fuses, micro fuses, resettable fuses and thermal fuses] 94. 74 Continuous cast copper rod/copper scrap Copper foil for copper clad laminates. 95. 74, 76, 85 Copper-cadmium braided wire; Self-soldering/self-bonding aluminium wire Loudspeakers; microphones. 96. 74, 85 Oxygen-free high conductivity (OFHC) Copper base with weldable steel ring Semi-conductor devices. 21 [ 97. Omitted ] 86 [ 98. * ** * ] 99. 74, 85 Parts made of OFHC copper 87 [ Semi-conductor devices; Transistor headers; Glass to metal seals; Capacitors. ] 88 [ 100. * ** * ] 101. 76 Plain Aluminium foil containing more than 99% Aluminium 89 [ Etched or formed Aluminium foil. ] 102. 76 Aluminium of purity 99% or above in the form of wire, strips, sheets, rods, bars, pipes, plates, sections, ribbons or shapes 90 [ Cans or Leads for Electrolytic Capacitors; Capacitor grade Metallised Plastic films; Disc covers for electrolytic capacitors. ] 103. 81 Cobalt Cast Alloy Permanent Magnets. 91 [ 104. * ** * ] 105. 81, 85 Molybdenum and molybdenum alloys, wrought, in all forms and articles and parts thereof 92 [ X-ray tubes. ] 93 [ 106. * ** * ] 107. 85 Self bonding / Self soldering insulated or enamelled copper wire 94 [ Loudspeakers; Relays; RF/IF Coils ; Transformers (other than Power transformers) and DC Micromotors upto13.5 volts and not exceeding 20 watts rating; Electronic tuner; Reed Relays. ] 108. 85 Parts of gas discharge tubes Gas discharge tubes. 95 [ 109. * ** * ] 95 [ 110. * ** * ] 95 [ 111. * ** * ] 112. 39, 72, 74, 76, 85 Parts of Relays, Switches, Connectors Relays; Switches; Connectors. 96 [ 113. * ** * ] 96 [ 114. * ** * ] 96 [ 115. * ** * ] 116. 85 Parts of Fly-back Transformer Flyback Transformers. 117. 85 Parts of Tuners TV Tuners. 97 [ 118. * ** * ] 97 [ 119. * ** * ] 97 [ 120. * ** * ] 121. Omitted 98 [ 122. 39, 74, 75, 76 (a) Composite copper clad materials consisting of Paper + Epoxy + Glass cloth; (b) Glass Epoxy Copper clad laminates or Paper Phenolic Copper clad laminates; (c) Aluminium based Copper clad laminate; (d) Copper based Copper Clad Laminate Printed Circuit Boards; Metal Clad Printed Circuit Boards. ] 99 [ 123. * ** * ] 124 74 Copper foils (Plain or adhesive coated) Copper clad laminates (phenolic or glass epoxy types); compsite type copper clad laminates; multi-layer Printed Circuit Boards, parts of connectors 125. 28,29,38,72, 74, 84 Cupric Chloride Etchant; Ammonical Etchants; Solid Carbide Drills; Routers; Hot Air Levelling Flux; Electroless Copper Plating Solution; Sensitisers; Activators; Post Activators; Copper foil of refined copper; Colloidal / Semi colloidal Graphite (Shadow) Printed Circuit Boards Solid 100 [ 126. * ** * ] 100 [ 127. * ** * ] 100 [ 128. * ** * ] 129. 39 Diallylphthalate (DAP) Moulding Powder or Compound (Plain or Glass/ Fibre filled with or without additives) 101 [ Connectors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Relays of contact rating upto 7 amperes. ] 102 [ 130. * ** * ] 131. 28,38,39 Gold plating make up and replenisher solutions and salts; Resins for gold recovery 103 [ LED Displays; Connectors; Parts of connectors. ] 160 [ 131A 38 Fine barrier or Met gold replenishers Connectors 131B 39 Fortron Resin (Polysulphones) Connectors ] 132. 74 Solder Plated Annealed Copper Wire (SCA) of diameter 0.4mm to 1.2 mm Plastic film capacitors 133. 79, 80 13 [ Zinc of purity 99% or above in rod, wire or Strip form (plated or unplated); Zinc wire/ Zinc-Aluminium wire with dia upto 5 mm; Tin-Zinc wire with dia upto 3mm ] 104 [ Electronic Capacitor Grade Metallised Plastic Film; Blade fuses 1 to 40 amperes. ] 105 [ 134. * ** * ] 135. 76 Aluminium wire (of purity 99.9% or above ) of dia upto 3mm 106 [ Lead Wires/Lead Tabs for electrolytic capacitors; Electronic Capacitor grade Metallized Plastic film. ] 107 [ 136. * ** * ] 137. 38,39,69 Hydroxy Propyl Methyl Cellulose Barium Titanate based or Lead Titanate based Ceramic composition 108 [ Ceramic Substrates/Rods/ Discs / Dielectric. ] 109 [ 138. * ** * ] 109 [ 139. * ** * ] 140. 39 Polyimide Film (Kapton) 110 [ IC Sockets (Connectors). ] 111 [ 141. * ** * ] 111 [ 142. * ** * ] 143. 72,74 Lead wires of Iron or non-alloy steel plated or coated with other base metals Resistors; Potentiometers; Plastic Film Capacitors; Lead Tabs of Electrolytic Capacitors 144. 29,72,74,76, 85 Copper alloy resistance wire and strips; Steel or Aluminium in substrate or sheet form; Butyl DiGol Resistors; Potentiometers 145. 69, 75, 76, 81 Metal alloy targets 112 [ Resistor Grade Metallized Ceramic Cores. ] 113 [ 146. 34, 72, 85 (a) Chip Transistors, Varicap Diodes; (b) Polywax (c) Tin coated CRCA sheets Tuners. ] 21 [ 147. Omitted ] 148. 28 Zinc Oxide (Purity minimum 99.5%); Strontium Oxide/Strontium Carbonate; Zinc Stearate (Purity minimum 99%); Polyvinyl alcohol (PVA); Polyvinyl Butyral (Ash Content max 1%) 114 [ Pre-Calcined Ferrite Powder (Spray Dried). ] 149. 28 Zirconium Oxide (Purity not less than 99%); Tin Oxide (Purity not less than 99%); Lanthanam Oxide (Purity not less than 99%); Zinc Oxide (Purity not less than 98%); Polystyrene (Purity not less than 98%); Magnesium Oxide (Purity not less than 98%); Calcium Carbonate (Purity not less than 98%); Tantalum Oxide (Purity not less than 99%); Barium Carbonate (Purity not less than 99%) 115 [ Microwave Dielectrics. ] 150. 39 Phenolic Moulding Powder/Resin 116 [ Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors. ] 117 [ 151. 39, 69, 73 (a) Guide Ceramic; Guide LCP (Liquid Crystal Polymer) (b) Needle and springs Print heads ] 152. 85 Parts of Loudspeaker Loudspeakers 118 [ 153. * ** * ] 154. 39 Polycarbonate (Plain or glass filled moulding powder) 119 [ Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC. ] 120 [ 155. * ** * ] 120 [ 156. * ** * ] 157. 39 SRBP (Synthetic Resin Bonded Paper) sheets and substrate 121 [ Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC. ] 158. 25 Ball Clay Ceramic Cores/Substrates for resistors 122 [ 159. * ** * ] 21 [ 160. Omitted ] 21 [ 161. Omitted ] 122 [ 162. * ** * ] 122 [ 163. * ** * ] 164. 28,34 Boron Nitride Suspension; Metallisation Inhabitation Fluid (Oil) 123 [ Electronic Capacitor Grade metallised Plastic Film. ] 165. 29 Dowanol PX-16S (Non-CFC solvent) 124 [ Flyback Transformers. ] 125 [ 166. * ** * ] 167. 76 Etched Aluminium Foil Formed Aluminium Foil for electrolytic capacitors. 126 [ 168. * ** * ] 126 [ 169. * ** * ] 126 [ 170. * ** * ] 171. 74, 76, 80 Aluminium wire with silicon or magnesium with impurity upto 2%; Bonding wire (aluminum, gold and copper based ) Semi-conductor devices, LED/LED displays, Hybrid micro-circuits 127 [ 172. * ** * ] 127 [ 173. * ** * ] 174. 28, 29, 35, 72, 81 Barium bromide; Sodium aluminate ; Bariumaluminate; Methoklone; Methyl chloride; Dichloro methane; Titanium metal powder (99% purity); Cesium glass powder; Barium glass powder; Argon -Neon mixed gas (99% purity); Argon-hydrogen mixed gas (99% purity); Copper Plied Steel wire (tin plated ) with dia upto 1.5 mm; Adhesive paste Gas discharge tubes 175. 39 Tedlar film 128 [ Multi layer laminates, glass epoxy copper clad laminates. ] 129 [ 176. * ** * ] 129 [ 177. * ** * ] 129 [ 178. * ** * ] 129 [ 179. * ** * ] 129 [ 180. * ** * ] 129 [ 181. * ** * ] 182. 39 Noryl; Nylon 130 [ LED Displays, switches, power entry connectors. ] 183. 39 Polyacetal 131 [ LED Displays, switches. ] 132 [ 184. * ** * ] 132 [ 185. * ** * ] 186. 39 Silicon oil 133 [ Electronic capacitor grade metallised plastic film. ] 134 [ 187. * ** * ] 188. 72 Coated/ uncoated CRCA/ Mild stainless steel in the form of sheets/ strips/ coils Switches, lead frames 135 [ 189. 28, 29, 38, 68, 69, 73 (a) Silicon carbide roller for furnace; polyethylene glycol; Zucoplast; Polyamonium citrate; Octanol; Copper oxide; (b) Grinding wheels (metal bond, resin bond, diamond wheel, Conc 50-100%, grit D15-D30- 400 mesh)/slicing wheels; (c) Conveying trays/super refractories/ pusher tiles/ ceramic saggers; Grinding steel balls (hardness 58-60%, carbon minimum 0.15%, chromium 1-1.2%); Steel balls; Soft ferrite parts/ pre- calcined ferrite powder (spray dried) ] 190. 69, 70, 71, 74, 85 15 [ Silver Copper Alloy wires; Glass tubes of sizes between 2 mm to 6mm outside diameter, in cut lengths upto40mm; Brass Fuse Caps; Polymeric Positive Temperature Coefficient Chips; Ceramic Tubes; Blade Fuse Body 28 [Micro Fuse Base, Sub-Miniature Fuse Base, Micro Fuse Cover, Sub-Miniature Fuse Cover] ] Glass cartridges fuses/ ceramic tube fuses/ 16 [ PPTC resettable fuses, blade fuses 1 to 40 Amps ] 23 [ sub-miniature fuses, micro fuses, resettable fuses and thermal fuses ] 136 [ 191. * ** * ] 136 [ 192. * ** * ] 136 [ 193. * ** * ] 194. 69, 85 Piezo ceramic formulated material / powder; Piezo ceramic discs/ mounted piezo electric plates; diaphragm of permalloy; weight of permalloy; terminal pins; yoke Buzzers/ sirens /ringers 137 [ 195. * ** * ] 137 [ 196. * ** * ] 137 [ 197. * ** * ] 36 [ 198. * ** * ] 137 [ 199. * ** * ] 137 [ 200. * ** * ] 137 [ 201. * ** * ] 137 [ 202. * ** * ] 203 85 Parts of remote control Remote control 138 [ 204. * ** * ] 205 71 Silver copper alloy wire in dia upto 0.25 mm Metal to ceramic brazing rings for GD tubes 139 [ 206. 34, 38, 39, 40, 68, 74, 85 Ceramic disc single layer; pin; washer; axial lead finish; solder/ solder paste/ solder with paste/ solder flux; solder with flux; wire leads; eyelet finish; eyelet fixing collect; marking ink; epoxy resin/ stycast; carrier tape/ cover tape/ taping material/ sealing tape/ plastic reels; Termination paste EMI/RFI filters ] 140 [ 207. * ** * ] 140 [ 208. * ** * ] 140 [ 209. * ** * ] 140 [ 210. * ** * ] 140 [ 211. * ** * ] 212 79 Zinc manganate Soft ferrites 141 [ 213. * ** * ] 141 [ 214. * ** * ] 215 74 Bronze powder Resistors 161 [ 215A. 74 Oxygen Free Copper Resistors ] 142 [ 216. * ** * ] 142 [ 217. * ** * ] 142 [ 218. * ** * ] 142 [ 219. * ** * ] 220 59 Fabric coated with rubber; Wax emulsion; basoplast Loudspeakers, paper cones/ spiders/dust caps for loudspeakers 143 [ 221. 39, 40, 84 (a) Polyacetals, Acrylonitrile-Butadiene- tyrene(ABS) copolymers; polystyrene; (b) Rubber belts /ring upto 150 mm; (c) Acetal plastic powder/ resin /granule; (d) Capstan shafts, sintered bush, rubber belts Loudspeakers ] 144 [ 222. * ** * ] 144 [ 223. * ** * ] 144 [ 224. * ** * ] 145 [ 225. 3824 99 00, 39, 9010 90 00 (i) Palladium Tetra Amine Sulphate (ii) Palladium make up solution (iii) Palladium Additive (iv) Palladium replenisher (v) Palladium Anode Polariser 155 [ (vi) Liquid crystal polymer (LCP) ] (vii) Palladium electroplating salt (viii) Polybutylene terephthalate Connectors ] 156 [ 225A. 3824 99 00 Palladium Tetra Amine Sulphate Parts of Connectors ] 162 [ 225B. 28, 29, 38 (a) Golden eye nickel makeup solutions (b) Golden eye nickel concentrate (c) Nickel additive solutions for plating (d) Surclean for plating bath (e) NFACID/NF TIN for plating Connectors ] 226. 3921 1900 37 [ 7419 80 90 ] 74 (i) SRPB strips/sheets substrate (ii) Braided copper wire (iii) Copper nickel Alloy with layer of palladium Copper with or without an intermediate layer of cooper in strips/coil form. Relays 146 [ 227. * ** * ] 146 [ 228. * ** * ] 229. 8544 19 (i) Enamelled Aluminium wire 147 [ Loudspeakers. ] 148 [ 230. * ** * ] 231. 24 [ 2710 19 71 ] 3902 9000 3902 3000 32 [ 3824 99 00 ] (i) Hydroisomerized base oil (ii) Polyalphaolefin (iii) Therm 2710 19 60 oplastic elastomer (iv) Organoclay gellant Cable Filling/ Flooding compounds (Thixotropic jelly) for optical fibre cables 232. 33, 39,69, 76 (i) Perfluoro Polyether Oil (Fomblin oil) (ii) Ceramic evaporation boats (iii) Graphic foil Electronic Capacitor grade metallised Plastic film for Capacitors 149 [ 233. * ** * ] 149 [ 234. * ** * ] 10 [235 35 [ 3907 99 00 ] 3404 90 33 35 [ 3908 90 00 ] (i) Plastic powder PBT (Poly brominated Terephthalate) (ii) PCT (Poly chlorinated terphenyls) (iii) Stanyl IC sockets.] 19 [236 8546 90 90 Polyster insulation tapes Degaussing coil and other wound components 150 [ 237. * ** * ] LIST B 151 [ 1. * ** * ] 151 [ 2. * ** * ] 152 [ 3. 38, 58, 69, 84, 85 (a) Precalcined/Pre-sintered ferrite powder (b) Molybdenum Sillicide/Molybdenum disillicate heating elements; conveying trays; saggers Ferrites ] 153 [ 4. * ** * ] 5. Omitted 6. Omitted 7. Omitted ******************* Notes: - (As amended by Notifications) No. 60/99-Cus, dated 11-5-1999; No. 20/2000-Cus, dated 1-3-2000; No. 54/2000-Cus, dated 4-5-2000; No. 20/2001-Cus, dated 1-3-2001; No. 26/2002-Cus, dated 1-3-2002; No. 57/2002-Cus, dated 31-5-2002; No. 108/2002-Cus, dated 10-10-2002; No. 8/2003-Cus, dated 13-1-2003; No. 28/2003-Cus, dated 1-3-2003; No. 9/2004-Cus, dated 8-1-2004; No. 70/2004-Cus, dated 9-7-2004; No. 22/2005-Cus, dated 1-3-2005; No. 25/2008-Cus, dated 1-3-2008; No. 20/2010-Cus, dated 27-2-2010 and No. 14/2011-Cus, dated 1-3-2011. 1 In the preamble, for the words, and falling under the Chapters of the First Schedule , the words and falling under the Chapters or heading or sub-heading or tariff items of the First Schedule has been substituted vide notification no. 25/2008 Cus dated 1/3/2008 2 From Sr. nos. 225 to 234 the entries have been inserted vide notification no. 25/2008 Cus dated 1/3/2008 3 Substituted vide notification no. 20/2010 Customs dated 27/2/2010 , before it was read as, 71 4 Substituted vide notification no. 20/2010 Customs dated 27/2/2010 , before it was read as, Contact tape with pure Nickel base and Crown Gold alloy; Contact tape with solder Diamond Back in fine silver; Contact tape in silver or silver alloy with or without palladium with Gold overlay 5 Substituted vide notification no. 20/2010 Customs dated 27/2/2010 , before it was read as, 2834 9019 3824 9090 3824 9090 3824 9090 9010 9000 3908 9090 6 Substituted vide notification no. 20/2010 Customs dated 27/2/2010 , before it was read as, (iii) Palladium Addotove 7 Inserted vide notification no. 20/2010 Customs dated 27/2/2010 8 Substituted vide notification no. 20/2010 Customs dated 27/2/2010 , before it was read as, 3824 90 3824 90 3824 90 3824 90 3824 90 3505 20 3824 90 3824 90 3824 90 3824 90 Further Substituted vide Notification No. 117/2011-Cus, dated 29/12/2011, before it was read as:- 2528 90 10 9 Inserted vide notification no. 20/2010 Customs dated 27/2/2010 , 10 Inserted vide notification no. 20/2010 Customs dated 27/2/2010 , 11 Against S. No. 38,-for the entry in column (2), the entry 38,39,76 or Any other Chapter has been substituted vide Notification No. 14/2011-Cus, dated 1-3-2011 12 In the entry in column (3), for the words Aluminium Tedlar , the words Aluminium Tedlar; Toughened Glass; Silver paste has been substituted vide Notification No. 14/2011-Cus, dated 1-3-2011 13 Against S. No. 133,-for the entry in column (3), the entry Zinc of purity 99% or above in rod, wire or Strip form (plated or unplated); Zinc wire/ Zinc-Aluminium wire with dia upto 5 mm; Tin-Zinc wire with dia upto 3mm has been substituted vide Notification No. 14/2011-Cus, dated 1-3-2011 14 In the entry in column (4), for the words capacitors , the words and figures capacitors; blade fuses 1 to 40 Amps has been Substituted vide Notification No. 14/2011-Cus, dated 1-3-2011 15 Substituted vide Notification No. 14/2011-Cus, dated 1-3-2011, before Substitution it was read as, Silver copper alloy wires; Glass tubes of sizes between 4mm and 6mm outside diameter, in cut lengths upto 40mm; Brass fuse caps; PPTC chips; Ceramic tubes 16 For the words PPTC resettable fuses , the words PPTC resettable fuses, blade fuses 1 to 40 Amps has been Substituted vide Notification No. 14/2011-Cus, dated 1-3-2011 17 Substituted vide Notification No. 14/2011-Cus, dated 1-3-2011. 18 Inserted vide Notification No. 14/2011-Cus, dated 1-3-2011. 19 Inserted vide Notification No. 14/2011-Cus, dated 1-3-2011. 20. Substituted vide Notification No. 117/2011-Cus, dated 29/12/2011, before it was read as:- 2834 9019 21. Omitted vide Notification No. 16/2012-Cus, dated 17/03/2012, before it was read as:- 79. 3[71 or 7220 12 90 or 7409 11 00 or 7409 90 00] 4[Silver bronze strips/ coils; Copper strips/coils/sheets; Copper nickel alloy or other alloys of copper in strip/coil/sheets; Stainless steel strips] Relays; Switches. 91. 74 Phosphor Bronze Sheets/ bars/ sections/ flats/ strips/ wire/ rods/ foils/ pipes, with or without plating Relays/parts of relays; Tape Deck Mechanism; connectors/parts of connectors; potentiometers/Parts of potentiometers; Heat Sinks; cassettes; Parts of cassettes; T.V. Tuner; telescopic antenna; gas discharge tubes/parts of gas discharge tubes, switches; parts of switches 97. 74, 85 OFHC copper wire, bars, rods, angles, shapes and sections, plates, sheets, strips, tubes and pipes Semi-conductor devices; electronic valves and tubes; transistor headers; glass to metal seals; capacitors. 147. 74 Cladded Copper/Copper Alloy Strip/Foil Switches with contact rating less; than 5 amperes at voltage not exceding 250 Volts AC or DC; Conectors, DC Micro-motors; parts of Connectors 160. 74 Unplated Brass Strips in Coil form 70 mm width; Phosphor Bronze Strips in Coil Form Connectors 161. 72,74 Bimetal sheets in coil forms/piece parts; Copper clad steel sheets in coil forms/piece parts Relays of contact rating upto 7 amperes 22. Inserted vide Not. 17/2016 - Dated 1-3-2016. 23. Inerted vide Not. 17/2016 - Dated 1-3-2016. 24. Substituted vide Notification No. 36/2019-Customs dated 30-12-2019 w.e.f. 01-01-2020 before it was read as 2710 1960 25. Omitted vide Notification No. 05/2020-Customs dated 02-02-2020 before it was read as 80. 71 Gold in the form of wire, ribbon, preform of purity 99.99% and above Semi-conductor devices; Light Emitting Diodes. 26. Substituted vide Notification No. 05/2020-Customs dated 02-02-2020 before it was read as 71, 76, 85 27. Substituted vide Notification No. 05/2020-Customs dated 02-02-2020 before it was read as Aluminium wire with silicon or magnesium impurity of upto 2%; gold wire with phosphorous or antimony doping 28. Inserted vide Notification No. 05/2020-Customs dated 02-02-2020 29. Substituted vide Notification No. 05/2020-Customs dated 02-02-2020 before it was read as 3908 9090 30. Corrected vide Corrigendum No. F. No. 334/2/2020-TRU dated 04-02-2020 before it was read as 3907 99 90 31. Substituted vide CORRIGENDA No. G.S.R. 316(E) dated 27-05-2020 before it was read as 3824 9090, 3908 90 90, 3824 90 21 32. Substituted vide CORRIGENDA No. G.S.R. 316(E) dated 27-05-2020 before it was read as 3824 9011 33. Substituted vide CORRIGENDA No. G.S.R. 316(E) dated 27-05-2020 before it was read as 3824 90 34. Substituted vide CORRIGENDA No. G.S.R. 316(E) dated 27-05-2020 before it was read as 3824 90 35. Substituted vide CORRIGENDA No. G.S.R. 316(E) dated 27-05-2020 before it was read as 3907 99 20, 3908 90 90 36. Omitted vide Notification No. 04/2021-Customs dated 01-02-2021 w.e.f. 02-02-2021 before it was read as 198. 39, 74, 85 Former, bases, bobbins, brackets; CP wires; P.B.T.; Phenol resin moulding powder; Lamination/ El silicon steel strips Transformers 37. Substituted vide NOTIFICATION No. 57/2021-Customs dated 29-12-2021 w.e.f. 01-01-2022 before it was read as 7419 9990 38. Substituted vide NOTIFICATION No. 57/2021-Customs dated 29-12-2021 w.e.f. 01-01-2022 before it was read as 6815 10 39. Inserted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 40. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 2. 25,28,40,56,70,84,85 Potassium carbonate/Potassium Nitrate(prilled); Barium carbonate; Pumice Powder; Cerium oxide Anode buttons; Necks and Neck tubings; wool felt/rubber based felt sleeve; cullet (recycled glass scrap) ] spodumene Parts of television picture tubes; parts of cathod ray tubes 3. 25, 28, 40, 70, 84, 85 Strontium carbonate; garnet powder; stud pins; Titanium dioxide; sodium antimonate; rubber sleeve Glass shells/parts for colour picture tubes; glass shell/parts of cathode ray tubes. 5. 28 High purity gases: Argon; halocarbon-14; halocarbon-116; halocarbon-23, helium; silicon tetrachloride; sulphur hexafluoride; chlorine; silane; hydrochloric acid; phosphine silane mixture; boron trichloride; dichlorosilane, diborane; hydrogen bromide; phosphine in nitrogen; nitrous oxide; boron trifluoride; arsine arsine mixture; phosphine in hydrogen; hydrogen; nitrogen Integrated circuits, Semi-conductor devices. 6. 28, 29 High purity chemicals: Acetic acid MOS/CMOS grade; Sulphuric acid MOS/CMOS grade; Hydrochloric acid MOS/CMOS grade; Buffered oxide etchant MOS/CMOS grade; Ammonium fluoride MOS/CMOS grade; Trichloroethylene MOS/CMOS grade; Isopropyl alcohol, MOS/CMOS grade Acetone MOS/CMOS grade; Hydrofluoric acid MOS/CMOS grade; Nitric Acid MOS/CMOS grade; Phosphoric acid MOS/CMOS grade; Hydrogen peroxide MOS/CMOS grade Integrated circuits; Semi-conductor devices. 41. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Hybrid Microcircuits; Potentiometers, Resistors (other than heating resistors); Ceramic and Mica Capacitors Conductive; Rubber Switches/Key Boards 42. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 11. 28, 29, 34 Resist stripper Semi-conductor devices, printed circuit boards. 12. 28, 29, 34, 85, Special materials: Surfactant, tetra ethyl-ortho-silicate (TEOS); trimethyl borate (TMB); trimethyl phosphate (TMPI); trichloroethane (TCA); dichloroethylene; sputtering targets; photo resist primer; edge bead remover Integrated circuits, Semi-conductor devices. 43. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 13. 28, 29, 37 Photo resist associated thinners or/and developers; photospin glass Semi-conductor devices, printed circuit boards; LED/LED Displays, Liquid Crystal Displays, Hybrid Micro-Circuits. 44. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Etched or Formed Aluminium Foil, Electrolytic Capacitors. 45. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 15. 28, 29, 38 Dopants or doping sources in all forms, and with or without precious metal constituents Semi-conductor devices. 46. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Capacitors; Semi-conductor Devices; Light Emitting Diodes; Mounted piergo electric Crystal; Liquid Crystal Displays; Electronic Valves and Tubes; Switches; Copper clad laminates of glass epoxy/paper epoxy type; composite type copper clad laminates; Delay lines; Line and Wave Traps; Potentiometers; Silicon Crystals or Silicon wafers; Connectors; Resistors (other than heating resistors); Deflection parts; Loudspeakers; Magnetic Heads; Paper Cones/Spiders/Dust Caps for Loudspeakers; Hybrid Microcircuits; Printed parts, Relays. 47. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 17. 28, 32 Ferric Oxide of purity of 99% and above; manganous manganic oxide with manganese content 71% or above; Manganese dioxide of purity of 99% and above; Manganous Oxide; Nickel Oxide; Strontium Carbonate Ferrites, Ceramic Capacitors, Resistors(other than heating resistors) 48. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 19. 28, 39, 68, 73 Blue steel lapping carriers/lapping carriers; lapping vehicles; lapping abrasive powder; lapping compound Mounted piezo-electric crystals; Printed Circuit Boards; Semi Conductor devices; Potentiometers; Resistors (other than heating resistors); Connectors; Switches; Relays; Tape deck mechanism; Magnetic heads; Deflection parts; DC micro-motor upto 13.5 V not exceeding 20 Watt rating; Silicon in all forms, LED lamps and displays 49. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 20. 28, 39, 81, 85 Tantalum powder; Tantalum wire; GM Seals; Cans; Silver powder suspension; Manganese Nitrate; Heat shrinkable polyester tubing Tantalum capacitors, Mounted Piezo Electric Crystals. 21. 28, 48, 69, 75, 78, 81, 84 Lead based ceramic composition; Magnesium titanate based ceramic composition; Neodium based ceramic composition; Alumina setters/slabs; Lint free paper/paper towels/ filter paper; Zirconia milling media/ high alumina tumbling media; Steel shots - copper plated hollow; Nickel and sulphonic acid based plating chemicals; Razer blades/doctor blades Ceramic dielectric (multilayer) capacitors, Ceramic Capacitors, Resistors (other than heating resistors) 22. 28, 68 Tantalum Neodyme oxide; Neodyme oxide; Strontium carbonate Ceramic Capacitors. 23. 28, 70, 73, 75, 85 Crystal Holders, Bases, covers; Glass Bulbs; Glass Bases; Nickel Eyelets; Springs; Solder wire 25 SWG or thinner; Chromium Pellets Mounted Piezoelectric crystals. 24. 28, 81 Tungsten rhenium wire; Suspension of aluminium oxide in binder; Suspension of tungsten powder and aluminium oxide in binder; Triple carbonate suspension of calcium, barium, strontium in binder Electron guns and electron gun parts. 50. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 26. 32 Electron Phosphor Electronic Valves and Tubes. 27. 28, 32, 38 Desmearing agents Printed Circuit Boards. 51. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor Devices; Liquid Crystal Displays; Electronic Valves and Tubes; Resistors (other than heating resistors); Connectors; Magnetic Tape; Relays; Potentiometers; Switches; Capacitor Grade metallised plastic film; Piezoelectric crystal; Hybrid Micro circuits, Capacitors 52. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 29. 32, 37, 39 Solder Mask/Resist in ink or film form, with or without associated catalysts Printed Circuit Boards. 53. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor devices, printed circuit boards, potentiometers, capacitors, hybrid microcircuits, printed parts, coils and inductors, resistors (other than heating resistors). 54. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 31. 32, 38 Internal dag, aqua dag, graphite, hitasols, external quoting graphite or external dag Electronic Valves and Tubes. 55. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor devices; Heat sinks; deflection parts. 56. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 33. 37 Photo Polymer Film Printed Circuit Boards; Liquid Crystal Displays. 34. 37, 39 High resolution, high contrast photographic films and photo stencil films; DIAZO (C 6 H 5 N 2 ) films Printed Circuit Boards; semi conductor devices; hybrid microcircuits. 35. 37, 70 High Resolution Photo Plates; Photomask Substrates High Resolution Photo Masks; Semi- conductor devices; Liquid Crystal Displays; Silicon Single Crystals or Wafers, Printed Circuit Boards. 36. 37, 70 High resolution photo mask Semi-conductor devices; printed Circuit Boards; Liquid Crystal Displays. 37. 38 Silicon in the form of undiffused wafers, discs or chips Semi-conductor devices. 57. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 39. 38, 81 Lithium niobate wafers Hybrid microcircuits. 40. 38, 85 Silicon in the form of diffused wafers, discs or chips(with or without molybdenum disc) Hybrid microcircuits or semi conductor devices. 41. 38, 85 Getters Electronic valves and tubes. 58. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Multilayer Printed Circuit Boards; copper clad laminates. 59. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 44. 39 Plain plastic films (other than polystyrene film) of thickness 26 microns or below, metallised plastic films of thickness 26 microns or below Explanation - for the removal of doubts, 'plain plastic film' includes biaxially oriented poly propelene (BOPP) film. Plastic film Capacitors; Mixed Dielectric Capacitors, other than power capacitors 60. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Potentiometers; connectors, Parts of relays/ switches/connectors 61. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Relays; Potentiometers; tape deck mechanism: connectors, Parts of connectors; parts of relays/switches/connectors. 62. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 47. 39 Polypropylene moulding powder/granules Deflection parts; Cassettes, capacitors 63. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Connectors: deflection parts; switches; relays, resistors; potentiometers; parts of relays/switches/connectors 64. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 49. 39 Heat shrinkable PVC sleeving, tubing, film or ring Capacitors; relays; deflection parts. 65. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 50. 39 Polyurethane lapping pads Mounted piezoelectric crystals; Printed Circuit Boards; semiconductor devices; potentiometers; resistors (other than heating resistors); connectors; switches; relays; tape deck mechanisms; magnetic heads; deflection parts; DC Micromotors upto 13.5 volts and not exceeding 20 watts rating; silicon (in all forms). 51. 39 Plain polystyrene film Plain film capacitors; mixed dielectric capacitors. 66. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 53. 39 Release film for multilayer laminates Printed Circuit Boards. 54. 39,40 Polyvinyl Alcohol, Polyisobutylene. Chlorosulphonated/chlorinated Polyethylene Ferrites. 55. 39, 43 Antistatic materials in the form of tubes, strips, mats, covers, bins, boxes, containers Semi-conductor devices, Hybrid microcircuits. 67. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Capacitors; deflection parts; resistors (other than heating resistors); semi conductor devices; inductors. 68. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 57. 39, 48, 85 Domes or Dust caps; Paper/Plastic cones Loudspeakers. 69. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 58. 39, 48, 85 Parts of Potentiometers Potentiometers. 59. 39, 59, 73 Screen mesh of stainless steel/polyester/ metallised polyester/metallised nylon (in sizes of mesh 60 or above) Ceramic capacitors, resistors; potentiometers; hybrid microcircuits 70. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Potentiometers; printed parts, resistors(other than heating resistors) 71. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 61. 39, 73, 79, 85 Parts of magnetic sound heads Magnetic sound heads. 72. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 63. 39, 85 Polyethylene terephthalate film with ferro magnetic coating of thickness upto 0.005 inch with magnetic coating 50 to 180 microinch Floppy diskettes. 63A. 39, 73 Moulded shell with liner, steel hub ring, spring, shutter Floppy diskette (3.5 size) 73. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Liquid Crystal Displays; Semi conductor Devices; EHT Transformers; Potentiometers; Electrolytic Capacitors; Solid tantalum capacitors. 74. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 65. 39, 85 Formers, bases, bobbins; Holders, brackets; Shielding cases, cans RF/IF coils or transformers or deflection parts. 75. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 66. 40, 59 Bungs; Rubber pinch rollers with or without plastic bush Electrolytic capacitors; tape deck mechanisms. 76. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 68. 40, 85 Anode assembly consisting of EHT cable, silicone rubber cap and contact spring or parts thereof (EHT cable in cut pieces or running length) Deflection parts. 69. 48 Electrolytic Capacitor/Condenser Tissue paper Electrolytic Capacitors; Plastic Film Capacitors. 70. 48, 76 Kraft paper/tissue paper or aluminium foil for voice coil Loud speakers (cone type). 71. 59 Felt sheet (fully compressed) of 1.5 mm thickness and below Tape deck mechanism. 77. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor devices; Light Emitting Diodes; Resistors (other than heating resistors); Capacitors; Connectors; Hybrid Microcircuits; Printed parts. 78. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 73. 69, 85 Alumina rods and bars (with Alumina content above 90%) in coated or uncoated form; Ceramic plates/flats/cases/bases/formers; Steatite rods and bars in coated or uncoated form Resistors (other than heating resistors); Semi-conductor Devices; Hybrid Microcircuits; Electron Guns and Electron Gun parts. 74. 69, 85 Ceramic dielectric (coated or uncoated) Ceramic capacitors. 79. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Liquid Crystal Displays; semi conductor devices; Electronic valves and tubes (other than television picture tubes/cathode ray tubes); Glass to metal seals; Lead frames; Transistor headers; Reed relays or Reed switches; delay lines; resistors (other than heating resistors);mounted piezoelectric crystals; electron guns and electron guns parts; gas discharge tubes. 80. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 77. 70, 85 Fused Quartzware Semi-conductor devices; silicon in all forms. 78. 71 Synthetic quartz crystal blocks and blanks Mounted Piezoelectric crystals. 81. 71, 72, 75, 80 Nickel plated steel strip; tin silver antimony alloy Semi-conductor devices. 82. 26[76,85] 27[Aluminium wire with silicon or magnesium impurity of up to 2%] Semi-conductor devices. 81. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 83. 72 CRNGO silicon steel strip/ sheet/coil/hoop with or without tin plating DC Micromotor; Potentiometer; Resistors. 82. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 84. 72 Coated/uncoated electrogalvanised CRCA/ mild steel/stainless steel in the form of sheet/strip/wire/coils DC Micromotors; tape deck mechanism, resistors, potentiometers 83. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor devices; electronic valves and tubes; transistor headers; glass to metal seals; lead frames; cast alloy permanent magnets; hybrid microcircuits; gas discharge tubes. 84. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Lead tabs for electrolytic capacitors, capacitors 85. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Potentiometers; Hybrid microcircuits; Printed parts; semi-conductor devices; Light Emitting Diodes. 86. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 98. 74, 85 Rayon or Silk cover Litz wire of the following sizes - (a) 6, 8, 12 or 24 strands with each strand diameter 0.03 mm; (b) 6 or 9 strands with each strand diameter 0.04 mm RF/IF Coils or transformers. 87. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semi-conductor devices, electronic valves tubes, transistor headers, glass to metal seals, capacitors. 88. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 100. 76 Etched or formed Aluminium Foils Electrolytic Capacitors. 89. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Etched or formed Aluminium foil; electrolytic capacitors or plastic film capacitors. 90. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Cans or Leads for Electrolytic capacitors; Semi-conductor Devices; Light Emitting Diodes; Capacitors; Capacitor grade Metallised Plastic films; Potentiometers; Disc covers for electrolytic capacitors. 91. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 104. 81 High purity chromium powder (99.99% and above) Semi-conductor devices, Mounted piezo electic crystals, electronic valves and tubes, vacuum interruptor tubes, Resistors 92. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Electronic Valves and Tubes; X-ray tubes; Semi-conductor Devices; Mounted Piezoelectric Crystals. 93. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 106. 84, 85 Parts of Vacuum Interruptor Tubes Vacuum Interruptor Tubes. 94. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Deflection parts; Loudspeakers;Relays; Magnetic Heads, RF/IF Coils; Transformers (other than power transformers) and DC Micromotors upto 13.5 volts and not exceeding 20 watts rating; electronic tuner, Reed Relays, Hybrid Micro-Circuits, Degaussing Coil 95. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 109. 85 Light Emitting Diodes in the form of Chips, wafers or undiced discs Light Emitting Diodes, Lamps and Displays. 110. 85 Parts of Cathode Ray Tubes (other than glass parts) Cathode Ray Tubes. 111. 85 Lead Tabs/Paddle Tabs Electrolytic Capacitors. 96. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 113. 85 Parts of electron Guns Electron Guns, Television picture tubes or Cathode Ray Tubes. 114. 85 Casings of aluminium Electrolytic capacitors. 115. 85 Parts of CD/VCD/DVD mechanisms, namely, optical pick up assembly and parts thereof, DC micro motors, Loader parts of plastic (parts of CD loader), cable connector, springs, screws, washer CD Deck Mechanism. 97. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 118. 85 Parts of Data Cartridge Data Cartridge. 119. 85 Parts of Transmitting tubes Transmitting tubes. 120. 85 Parts of deflection yoke (DY) Deflection parts. 98. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 122. 39,74,75,76 Composite copper clad materials consisting of Paper + Epoxy + Glass cloth Printed Circuit Boards 99. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 123. 74 Glass Epoxy Copper clad laminates or Paper Phenolic Copper clad laminates Printed Circuit Boards 100. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 126. 28,29,39,68, 71,81,82 Plastic Film for Wafer Dicing; Graphite Jigs /Block/Rods/ Plates Dicing blades/wheels; Tungsten filament and or parts thereof; Tungsten Wire/Rod; Colour Paste and Diffusants; Silver conductive paste /Suspension; Palladium Wire; n- Butyl Acetate; Bonding Tools LED/LED Displays; Semiconductor Devices; Hybrid Microcircuits; Mounted Piezo Electric Crystals; Resistors; Potentiometers 127. 70, 85 Parts of data graphic display tubes(colour), with a phosphor dot screen pitch smaller than 0.4mm Data graphic display tubes (colour), with a phosphor dot screen pitch smaller than 0.4 mm 128. 70,75 Glass Tubes/Insulators/Spacers; Mounted piezo electric crystals 101. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Connectors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Potentiometers; Relays of contact rating upto 7 amperes; Resistors 102. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 130. 39 Polyvinyl Chloride Film/Sheet Floppy Disks/Diskettes 103. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Semiconductor devices; LED/LED Displays; Connectors; PCBs, Parts of connectors 104. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Electronic Capacitor Grade Metallised Plastic Film/ 14 [ capacitors; blade fuses 1 to 40 Amps ] 105. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 134. 80 Tin Foil/ Tin Alloy Foil Plastic Film Capacitors; Reisistors (other than heating resistors) 106. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Lead Wires/Lead Tabs for electrolytic Capacitor grade Metallized Plastic film; Plastic film capacitors; semiconductor device; Capacitors 107. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 136. 28 Barium Carbonate Ceramic Capacitors 108. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Ceramic Capacitors, Ceramic Substracts/Rods/Discs/Dielectric/Powder 109. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 138. 28 Magnesium Oxide (Purity not less than 98%); Zinc Oxide (Purity not less than 98%); Aluminium Oxide (Purity not less than 99.9%); Vanadium Pentoxide (Purity not less than 99.9%); Lithium Carbonate (Purity not less than 99%); Manganese Carbonate (Purity not less than 98%); Bismuth Oxide (Purity not less than 99%); Cobalt Oxide (Purity not less than 99%); Copper Carbonate (Purity not less than 98%); Chromium Oxide (Purity not less than 98%); Indium Oxide (Purity not less than 99%); Dysprosium oxide (Purity not less than 99%); Gadolinium Oxide (Purity not less than 99%);Yttrium Oxide (Purity not less than 99.9%); Calcium Carbonate (Purity not less than 98%) ; Tin Oxide (Purity not less than 98%); Magnesium Carbonate (Purity not less than 99%); Iron Oxide (Purity not less than 99%); Barium Carbonate (Purity not less than 99%) Resistors; Ceramic Capacitors 139. 39,48,59 Resin - VAGH Co-Polymerised Vinyl Chloride Vinyl Acetate, Pressure Sensitive felt, with or without adhesive, Silicon Coated/Carbonized silicon paper Magnetic Tapes/Cassettes, Parts of Cassettes 110. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as IC Sockets (Connectors); Resistors; Potentiometers; Semiconductor devices 111. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 141. 39 Modified Polyphenylene Oxide Deflection Components; potentiometers 142. 39 Phenolic Moulding Powder/Resin Resistors; Potentiometers; Plastic Film Capacitors; Lead Wire/Lead Tabs of Electrolytic Capacitors 112. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Resistors; Resistor Grade Metallized Ceramic Cores 113. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 146. 85 Chip Transistors; Varicap Diodes Tuners; Modulators; Hybrid Micro Circuits 114. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Pre-Calcined Ferrite Powder (Spray Dried); Resistors 115. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Microwave Dielectrics; Ceramic Capacitors; Resistors; Varistors; Thermistors 116. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Hybrid Micro circuits; Potentiometers; Ceramic Capacitors; Thermistors; Varistors; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Connectors; Capacitors 117. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 151. 39,69 Guide Ceeramic; Guide LCP (Liquid Crystal Polymer) Print heads 118. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 153. 74,85 High Voltage Rectifier Diodes; Focus Potmeter; Electrolytic Tough Pitch Wire/Rods/Formed Pins/parts made thereof Deflection Components 119. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Resistors; Potentiometers; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC; Capacitors 120. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 155. 39 Poly Vinyl Acetate Resistors; Potentiometers; Hybrid Micro Circuits 156. 72 Nickel Iron (low carbon/gas free grade) in Sheet or strip form/EB Welded Triple Metal Strips/Controlled Expansion Alloy Strips Resistors; Potentiometers; 121. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Potentiometers; Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC 122. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 159. 32 Borosilicate Glass Powder Parts of Electron Gun/Multiform Bead Glass Rods 162. 28,29 Ammonium Dihydrogen Phosphate; Ammonium pantaborate Electrolytic Capacitors 163. 38 Carbon/Flurographite Powder Potentiometers 123. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Electronic Capacitor Grade metallised Plastic Film/Plastic Film Capacitors 124. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Flyback Transformers/Focus Resistors 125. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 166. 28,29,38,48 Monoalkylethers of ethylene glycol; Flux 1544; Ammonium Hydroxide (CMOS Grade); Ammonia (NH3) (CMOS Grade); Lid perform; Chemcassette Semiconductor devices 126. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 168. 29,32,38, 39,71 Dibutyl ether/Di-n-butyl ether Solvent; DMH Solvent; Printing Inks; Protective U.V. Lacquer; Dyes; Optical grade polycarbonate; Methyl Lactate; OFP; Cake Box; BOPP Film; Jewel box; Silver Sputtering Target CD-R(unrecorded CD) 169. 76 Aluminium clad entry foil Printed circuit board 170. 28 Phosphoric acid (MOS/CMOS, electronic grade); Hydrogen peroxide (MOS/CMOS, electronic grade). Semi-conductor devices, LED/LED displays 127. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 172. 80 Tin silver antimony alloy in any form Semi-conductor devices, LED/LED displays 173. 28 Titanium dioxide of minimum purity 99% Potentiometers, ceramic capacitors 128. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Printed circuit boards, semiconductor devices, multi layer laminates, glass epoxy copper clad laminates 129. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 176. 39 Polyester film Magnetic tape, plastic film capacitors 177. 29, 39 MEK (Methyl Ethyl Ketone); Polyurethane /Urethane elastomer; Cyclohexanone Magnetic tape 178. 39 Polyolefin heat shrinkable tubes/ sleeves Deflection components 179. 27, 39, 75, 85 Kilopoise Grease; Polyester mesh; Nickel alloys resistance wires and strips in bare or enameled form; Resistors and Potentiometers 180 85 Buffered Oxide Echants Semi-conductor devices, LED/LED displays 181. 39 Conductive silver epoxy and hardener Mounted Piezoelectric crystals, Hybrid-microcircuits 130. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as LED/LED Displays, switches, power entry connectors 131. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as LED/LED displays, switches 132. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 184. 39 HDPE; LDPE; Poly propylene LED/LED displays 185. 75, 85 Stem pin Electron gun, electronic valves and tubes, parts of electron gun 133. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Capacitors, resistors, electronic capacitor grade metallised plastic film/plastic film capacitors 134. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 187 27 Microcrystalline wax Plastic film capacitors 135. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 189. 69, 73 Conveying trays/super refractories/ pusher tiles/ ceramic saggers; Grinding steel balls (hardness 58-60%, carbon minimum 0.15%, chromium 1-1.2%); Steel balls Soft ferrite parts/ pre-calcined ferrite powder (spray dried), capacitors, resistors 136. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 191. 28, 29, 38 Silicon carbide roller for furnace; polyethylene glycol; Zucoplast; Polyamonium citrate; Octanol; Copper oxide Soft ferrites parts/ pre-calcinate ferrite powder (spray dried) 192. 68 Grinding wheels (metal bond, resin bond, diamond wheel, Conc 50-100%, grit D15-D30-400 mesh)/slicing wheels Soft ferrites parts/ pre-calcined ferrite powder (spray dried), semiconductor devices 193. 25, 28, 40, 69, 73, 85 High speed spindles of more than 10,000 RPM; silicon carbide hollow heating rods, with or without perforations; Heating coils (made of kanthal wire suitable for 1375 0 C dia 1 mm); Cobalt oxide (99% pure); Conveying trays (335 X 340 X 30 mm Alumina/cumulite); Setting batts (320X320X15 mm alumina/cumulite); Alumina sandwiched silicon carbide plate (340X170X15 mm alumina/cumulite); Magnesium oxide; Cupric oxide; Miraflow-A (polycarbon acid); Chloropolyethylene (CPE); Temperature measuring rings Ferrites 137. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 195. 73 Needle and springs Print head 196. 72, 85 T-yoke Loudspeakers 197. 28, 39 Acetylene black carbon/ other carbon and carbon powders; PTFE powder solutions Resistors and potentiometers 199. 39 Polybutylene terephthalate Connectors 200. 29 Ammonium adipate; Azelaic acid; P.Nitro benzoic acid Electrolytic capacitors 201 71 Pelladium copper contact tapes Relays 202 34, 72 Polywax; Tin coated CRCA sheets Tuners 138. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 204 85 Diffusion elements Semiconductor devices 139. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 206 38, 39, 40, 68, 74, 85 Ceramic disc single layer; pin; washer; axial lead finish; solder/ solder paste/ solder with paste/ solder flux; solder with flux; wire leads; eyelet finish; eyelet fixing collect; marking ink; epoxy resin/ stycast; carrier tape/ cover tape/ taping material/ sealing tape/ plastic reels EMI/RFI filters 140. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 207 34 Termination paste Capacitors, EMI/RFI filters 208 39 Phenolic resins; epoxy phenolic resins; silicon adhesive agent Capacitors, resistors 209 73 Rivets Potentiometers 210 69, 75, 85 Parts of cathodes Cathodes for electron guns 211 72 Soft magnetic iron strips Relays 141. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 213 39 Polypropylene granules Capacitors 214 38 Catalysts Resistors 142. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 216 38 Bentone Resistors 217 25 Quartz powder Resistors 218 32 Pigments Capacitors, resistors 219 28 Magnesium aluminum silicate Resistors 143. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 221 39, 40, 84 Polyacetals, Acrylonitrile-Butadiene- Styrene(ABS) copolymers; polystyrene; Rubber belts /ring upto 150 mm; Acetal plastic powder/ resin /granule; Capstan shafts, sintered bush, rubber belts CD /DVD mechanism, loudspeakers 144. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 222 28, 39, 40,70 Polyester/ polystyrene latex, glass cloth tape, acry emulsion, cobalt blue Cathode ray tubes 223 69, 72, 75, 85 Stainless steel wire of dia below 0.8 mm; Stainless steel strips of thickness below 0.6mm; ceramic bases; eyelets; sleeves; caps; nails Parts of electron guns 224 72, 73, 75, 76, 81 CRCA sheets, strips, wire and coils whether galvanized or not; Stainless steel-304/310/316/420 grades in the form of sheets, strips, wire, coils; Trimetal steel/INVAR in the form of sheets, strips, wire or coils; Alcoat (aluminised steel sheets) in the form of sheets, strips, wire or coils; Incoloy strips Parts of cathode ray tubes 145. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 225. 20 [ 38249090 ] 31 [ 3824 99 00 ] 3824 9090 3824 9090 9010 9000 29 [ 30 [ 3907 99 00 ] or 31 [ 3908 90 00 ]] 31 [ 3824 99 00 ] (i) Palladium Tetra Amine Sulphate (ii) Palladium make up solution 6 [(iii) Palladium Additive] (iv) Palladium replenisher (v) Palladium Anode Polariser (vi) Liquid crystal polymer (LCP) 7 [(vii) Palladium electroplating salt] Connectors 146. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 227. 2513 2090 3209 9090 3402 9099 5911 9090 (i) Pumice powder (ii) No bake emulsion (iii) Cleaner for No Bake Lacquer (iv) Acetate tape Cathode ray tubes 228. 7226 9990 7220 9090 (i) Alloy 223 (ii) SS 631 Parts of CRT 147. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as Loudspeaker, Degaussing coils 148. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 230. 27, 29, 32, 38, 39, 40, 68, 69, 70, 73, 81, 82, 85, 90 (i) Solderon Tin concentrate (ii) Solderon Acid HC (iii) Solderon ST-300 (iv) Solderon strip (v) Satin 108 (vi) Marking ink (vii) Melamine mould cleaning compound (viii) Tungsten boats and baskets (ix) Quartz wool tweezers (x) Teflon wafer carriers (xi) Diamond tips (xii) Dressing plates (xiii) Capillary (xiv) Rubber tip (xv) Push up needles (xvi) Thermocouples (xvii) Cartridge heaters Semiconductors 149. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 233. 7011 90 7011 90 7011 20 7011 20 7011 20 33 [ 3824 99 00 ] 33 [ 3824 99 00 ] 33 [ 3824 99 00 ] 33 [ 3824 99 00 ] 33 [ 3824 99 00 ] 3206 49 3920 99 3920 99 3920 99 3920 99 2820 90 3207 40 3214 90 6804 22 8443 90 8443 90 7020 00 8529 90 38 [ 6815 19 00 ] (i) ITO coated top glass plate (ii) Bottom glass plate (High strain point) (iii) Exhaust tube (iv) Preform ring (v) Glass/film filter for PDP (vi) Bus electrode paste (vii) Transparent dielectric paste/powder (viii) White dielectric paste/powder (ix) Barrier rib paste/powder (x) Vehicle for frit paste (xi) Phosphor paste/powder (xii) Dry film resist for barrier rib (xiii) Dry film resist for ITO (xiv) Laminated TD (xv) Lapping tape (xvi) MgO evaporation material (xvii) Sealing frit paste (xviii) Sealing frit powder (xix) SS powder for sandblasting (xx) Screen printing mask (xxi) Photo mask (xxii) Neoceram setter plate (xxiii) TCP (Tape carrier package) (xxiv) Graphite sheet Plasma display panel/module 234. 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 3805 20 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 34 [ 3824 99 00 ] 8 [2528 00 20 ] 2905 31 00 3212 10 00 17 [ 2712 20 90 [ 34 [ 3824 99 00 ]] (i) Sebacic acid (ii) Ammonium para nitro benzoate (iii) Adipic aid (iv) Glutaric acid (v) Ammonium benzoate (vi) PVA powder (vii) Triethanolamine (viii) Ortho nitro anisol (ix) Para nitro phenol (x) Methoxy phenol 9 [(xi) Boric acid (xii) Mono ethylene glycol (xiii) Marking foil/ stamping foil (xiv) Liquid paraffin ] 18 [(xv) Para nitro benzyl alcohol ;] Aluminium Electrolytic capacitors 150. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 237 7605 or 8544 19 Aluminium wire of purity 99.9% or more of dia upto 3 mm; Copper clad Aluminium wire of purity 99.9% or more of dia upto 3 mm Deflection Yokes for Colour Picture Tubes ] 151. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 1. 28 Litharge Glass shell/parts for colour picture tub 3907 99 90 es, parts of Cathode ray tubes 2. 28 Gamma Ferric Oxide Magnetic Inks or Magnetic Tape 152. Substituted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 3. 38 Precalcined/Pre-sintered ferrite powder Ferrites 153. Omitted vide Notification No. 14/2022-Customs dated 01-02-2022 w.e.f. 02-02-2022 before it was read as 4. 58, 69, 84,85 Molybdenum Silicide/Molybdenum disillicide heating elements; Conveyingtrays; Saggers Ferrites, Capacitors; Resistors 154. Substituted vide Notification No. 06/2023-Customs dated 01-02-2023 w.e.f. 02-02-2023 before it was read as, Ferrites 155. Substituted vide Notification No. 06/2023-Customs dated 01-02-2023 w.e.f. 02-02-2023 before it was read as, (vi) Liquid crystal polymer (LCP) Connectors 156. Inserted vide Notification No. 06/2023-Customs dated 01-02-2023 w.e.f. 02-02-2023 157. Substituted vide Notification No. 07/2024-Customs dated 29-01-2024 before it was read as, 31st March, 2024 158. Substituted vide Notification No. 34/2024-Customs dated 23-07-2024 w.e.f. 24-07-2024 before it was read as, 157 [ 30th September, 2024 ] 159. Omitted vide Notification No. 34/2024-Customs dated 23-07-2024 w.e.f. 30-09-2024 before it was read as, tinned copper interconnect; toughened glass with low iron content and transmittivity of min. 90% and above; 160. Inserted vide Notification No. 34/2024-Customs dated 23-07-2024 w.e.f. 24-07-2024 161. Inserted vide Notification No. 34/2024-Customs dated 23-07-2024 w.e.f. 24-07-2024 162. Inserted vide Notification No. 34/2024-Customs dated 23-07-2024 w.e.f. 24-07-2024