TMI BlogAmendments/deletions/corrections/additions in the Handbook of Procedures, Vol.2, 2004-2009, as amendedX X X X Extracts X X X X X X X X Extracts X X X X ..... the existing entry at C - 2032 new entry at Sl. No. C-2033 is added as per Annexure "C" to this Public Notice. This issues in public interest. (K.T. CHACKO) DIRECTOR GENERAL OF FOREIGN TRADE (Issued from F.No.01/87/171/00002/AM07/DES-VIII) Annexure "A" to the Public Notice No. 21 Dated: 15.6.2006 AMENDMENTS/CORRECTIONS Sl. No. Page No. in the HBP (Vol.2) Reference Amendments/Corrections 1 2 3 4 1 A-32 Product Group: Chemicals and Allied products SION entry No. A- 300 Amended vide Public Notice No. 64 dated 24.10.2005 The SION entry is amended as under:- Sr.No. Export item Qty. Import item Qty. allowed A300 Metronidazole Benzoate 1 kg (1) Metronidazole 0.688 kg OR 1 (a) Glyoxal 40% 1.54 kgs 1 (b) Anhydrous Ammonia 1.82 kgs 1 (c) Ethylene Oxide 1.24 kgs 1 (d) Formic Acid 0.69 kg OR 1(a)2-Methyl-5-Nitro Imidazole 0.96 kg 1 (b) Ethyline oxide 1.24 kgs 1 (c) Formic Acid 0.69 kg 2. Benzoyl chloride 0.65 kg 3. Beta Picoline 0.36 kg 2 A48 Product Group: Chemicals and Allied products SION entry No. A- 489 The quantity of import item No. 2 (H Acid) is amended to read as " 0.446 kg". 3. A285 P ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... nds): In Kg. per Kg. content of alloying element in the export product (a) (i) Ferro Silicon (Si : 75%) 1.70 (a)(ii) Ferro Manganese(Mn : 75%) Or 1.43 (a) (i) Ferro Silicon (Si : 75%) 1.46 (a) (ii) Silico- Manganese (Mn : 65% & Si : 15%) 1.65 (b) Charge Chrome, High Carbon Ferro Chrome (Cr : 60%) Or 1.79 Low Carbon Ferro Chrome (Cr : 70%) 1.53 (c) Unwrought Nickel (Ni : 99%) Or 1.04 Ferro Nickel, Nickel Oxide Sinter (Ni : 40%) 2.58 (d) Lead (Pb : 99%) Scrap/ Shots/ Wires/Powder in cored wire 1.60 (e) Ferro Molybdenum (Mo : 65%) Or 1.58 Molybdenum Oxide (Mo : 60%) 1.89 (f) Ferro Titanium (Ti : 70%) 2.43 (g) Ferro Tungsten (W: 75%) 1.38 (h) Any other Nobel/ Special Ferro-alloys (Ferro Vanadium, Ferro Boron, Ferro Phosphorous, etc.) 1.38 (i) Any other metal (not present in aforesaid ferro-alloys/metals) in unwrought or wrought form or in powder form in cored wires 1.04 (j) Sulphur stick/Sulphur powder in cored wire 2.00 3. Consumables/Misc. Inputs: In Kgs. (a) Graphite Electrodes (For EAF Furnace only) 4 (b) Relevant CI, Steel Rolls for Hot Rolling Mill/Continuous Casting Machine 0.06 (c) Relevant Copp ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ties of Ferro Alloys/Metals/Compounds have been worked out based on a specified percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the parenthesis against each alloy. If the percentage of alloying element in the ferro-alloy is higher/ lower, the revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm Actual % of element in the imported ferroalloy/metal/compound Note 4 : For a given alloying element in steel, wherever two alternate ferroalloy / metals /compound of the same alloying element have been permitted and it is proposed to import a combination of both, individual quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying element in two forms (but within the overall quantity of alloying element in the steel), using the content based formula given therein. Note 5: Alloying element(s) in steel is/are prescribed by specifying the minimum value or a range or the maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content based formul ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... : 1 tonne 1 Billets/Blooms of relevant grade of alloy steel OR 1030 Kg. Ingots of relevant grade of alloy steel 1050 Kg 2 CI/ Steel Rolls, TC Rolls, Rings for Rolling Mill 0.60 Kg. for Billets/Blooms input OR 1.20 Kg. for Ingot inputs 3 Relevant fuel for fuel fired Re-heating furnace. 2,61,000 K. Cal. 4 Relevant Fuel for electric power generation for Hot Rolling & Auxiliaries(for units with captive power plants/source only) 2,17,500 K. Cal 5 Relevant Shear Blades, Saw Blades 0.01 Kg. Note 1: The quantity of energy sources/ fuel for electric power generation (i.e 2,17,500 K.Cal) which is based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that Captive Power Plant (CPP)/Source of at least this capacity exist. In case CPP/Source in a given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. Note 2: Quantity of fuel for re-heating furnace (in K.Cal.) corresponds to a fuel having unit heat value 8700 K.Cal/kg. for which, 30 Kg. of the said fuel may be allowed. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the re ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... roduct Group: Textile SION entry No. J-161 The quantity of import item No. 1 is amended to read as "1.10 kg /kg content in the export product" 19. K106 Product Group: Miscellaneous The description and quantity of import item No. 2 is amended as under: 2. Nylon 55% & Cotton 45% Blended Yarn 0.441 kg OR 2(a) 100% Nylon Yarn 0.243 kg 2(b) 100% Cotton Yarn 0.198 kg Annexure "B" to the Public Notice No . 21 dated 15.6.2006 CHEMICALS AND ALLIED PRODUCTS Sr.No. Export item Qty. Import item Qty. allowed A-3614 Mono Methyl Aniline 1 kg Aniline 0.985 kg Methanol 0.338 kg A-3615 Zinc Salt of 2 Mercapto Benzothiazole (Active Content 93%) 1 Kg 1. Dibenzo Thiazyl Disulphide (95%) 0.764 Kg A-3616 Mono Methyl Amine Hydrochloride 1 Kg Methanol 0.503 Kg Ammonia 0.267 Kg A-3617 Dimethyl Urea 1 Kg Urea 0.718 kg Mono Methyl Amine 0.742 kg A-3618 Alpha Naphthol 1 Kg 1.Crude Naphthalene 1.600Kg 2.Caustic Soda Flakes/Lye (100% basis) 1.500Kg A-3619 Optical Brightener AMP Liquid (Assay 27%) 1 Kg 1.Sulphanilic Acid 0.061 Kg 2.Cyanuric Chloride 0.098 Kg 3.Diamino Stilbene Disulphonic Acid (4,4- ..... X X X X Extracts X X X X X X X X Extracts X X X X
|