9911796707
TMI BlogElectronic Industry goods - Effective rate of dutyX X X X Extracts X X X X X X X X Extracts X X X X ..... aid Table, the importer furnishes, at the time of importation, to the Assistant Collector of Customs, an undertaking to the efffect that : (a) the said imported goods shall be used for the purpose specified above; (b) the importer shall, within three months or such extended period as the Assistant Collector of Customs may, specify in this behalf, produce a certificate from the Assistant Collector of Central Excise in whose jurisdiction the factory manufacturing such finished goods is situated, to the effect that the said goods have been used in the manufacture of the said finished goods; and (c) the importer shall pay, on demand, in the event of his failure to comply with (a) and (b) above, an amount equal to the difference between the duty leviable on such quanity of the said goods but for the exemption contained herein and that already paid at the time of importation: Provided that the goods specified against Sl. No. 14 of List B of the said Table, shall also be exempted from the whole of the additional duty of customs leviable thereon under section 3 of the Customs Tariff Act, 1975 (51 of 1975). TABLE S.No. Chapter of the First Schedule to the Customs Tariff Act, 1975 De ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... r Semiconductor Devices, Mounted Piezoelectric Crystals, Electronic Valves and tubes, vacuum interruptor tubes. 17. 28 Selenium of purity of 99.99% and above Selenium Rectifiers. 18. 28, 29, 38 Electrolyte Etched or Formed Aluminium Foil, Electrolytic Capacitors. 19. 81 Indium Electronic grade Indium. 20. 32, 38 (i) Internal Dag (ii) External Dag Electronic Valves and Tube. 21. 76 Etched or formed Aluminium Foils Electrolytic Capacitors. 22. 39, 69, 73, 85 The following substrates in any form with or without tags: Potentiometers, Hybrid microcircuits, Printed components, semiconductor devices. (i) Phenolic/Polyamide/ SRBP (Synthetic Resin Bonded Paper) Substrates (ii) Enamelled steel substrates (iii) Glass epoxy unclad substrates (iv) Metal clad substrates (v) Ceramic/Alumina substrates 23. 74, 85 OFHC Copper base with weldable steel ring Semiconductor devices. 24. 85 Parts of gas discharge tubes Gas discharge tubes. 25. 85 Light Emitting Diodes in the form of Chips, wafers or undiced discs Light Emitting Diodes, Lamps and Displays. 26. 85 Parts of Transmitting Tubes Transmitting Tubes. 27. 85 Parts of Cathode Ray Tubes (other than ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... o 180 microinch Floppy diskettes. 7. 28 Silicon Monoxide Lumps Liquid Crystal Displays, metal film resistors. 8. 47 Bleached or unbleached Sulphide paper pulp or wood pulp Paper Cones for Loudspeakers. 9. 28, 32 (i) Ferric Oxide of purity of 99% Ferrites. (ii) Manganese Manganic Oxide of purity of 99% and above (iii) Manganese Dioxide of purity of 99% and above (iv) Manganous Oxide (v) Nickel Oxide (vi) Strontium Carbonate 10. 48 (i) Electrolytic Capa- citor/Condenser Tissue paper Electrolytic Capacitors, Plastic Film Capacitors. (ii) Plain/single or double Metallised Capacitor Tissue paper 11. 71 Silver alloy strips in coils of width upto 0.434 inches and thickness upto 0.006 inches Relays, connectors, switches, gas discharge tubes. 12. 15, 29, 32, 34, 39, 48, 70 (a) (i) Alpha cellulose paper/cotton paper (ii) Electrical grade craft paper (iii) Tung oil (iv) Volan/Silane treated glass fabric/cloth Copper clad laminates phenolic or paper Phenolic or glass epoxy types, printed circuit boards. (b) (i) Silane (ii) Glass filament yarn Silane treated glass cloth/fabric for use in the copper clad laminates. 13. 72, 73, 74, 76 (i) Iron of 99.7% puri ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... ning more than 99% Aluminium Etched or formed Aluminium Foil, Electrolytic capacitors or plastic film capacitors. 22. 70, 85 Fused Quartzware Semiconductor Devices, Silicon in all forms. 23. 32, 70, 85 (i) Glass frit or Glass Powder (ii) Glass preforms or pellets (iii) Glass tubes Liquid Crystal Displays, Semiconductor Devices, Electronic Valves and Tubes (other than television picture tubes/Cathode ray tubes), Glass to Metal Seals, Lead Frames, Transistor Headers, Reed Relays or Reed Switches, Delay Lines, Resistors (other than Heating Resistors), Mounted Piezoelectric Crystals, Electron guns and electron gun parts, Gas discharge tubes. 24. 39, 85 (i) Silicone rubber Keypad switches, parts of EHT transformers. (ii) Parts/articles of silicone, Elastomer or Silicone rubber Liquid Crystal Displays, Semiconductor Devices, EHT Transformers, Potentiometers, Electrolytic Capacitors, Solid tantalum capacitors. 25. 85 Pin connectors, including dip type, edge type and bellow type Semiconductor Devices, Liquid Crystal Displays, Hybrid Microcircuits. 26. 69, 78, 85 (i) Headers (ii) Caps with or without leads (iii) Cans with or without leads (iv) Pins (v) Stud seals ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... -55 (v) 3% Silane in nitrogen Semiconductor devices. (vi) Phosphane Silane in nitrogen (vii) Alkyd moulding com-pound (viii) Neutra clean 68/68D (ix) Freon TMSS (x) Pur-A-Masq (xi) Sodium hypophosphate (xii) Culmo-Starter (xiii) Culmo-Brightner (xiv) Culmo AN (xv) Culmo IRL (xvi) Freon solvent TDA - 35 (xvii) Freon solvent TF (xviii) Diborane in argon (xix) Tin - Silver Antimony alloy 41. 71 Gold in the form of wire, ribbon, preform of purity 99.99% and above Semi-conductor devices. 42. 37 Photo Polymer Film Printed Circuit Boards, Liquid Crystal Displays. 43. 28 Chromium di-oxide Magnetic Inks or Magnetic Tapes. 44. 28 (i) Silicon Tetrachloride Semiconductor Devices. (ii) Palladium Chloride 45. 81, 85 Bismuth-Cadmium alloys in all forms Semiconductor Devices. 46. 28 Barium Carbonate of purity of 98% and above Ceramic Capacitors, Elect-ronic valves and tubes, Gas discharge tubes. 47. 74 Berrylium Copper foil Magnetic Sound Heads. 48. 39 (i) Plain plastic films (other than Polystyrene film) of thickness 12 microns or below Plastic Film Capacitors, Mixed Dielectric Capacitors. (ii) Metallised plastic films of thickness 12 microns or b ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... , 39 Ethane VG (Trichloro ethane) Deflection components. 65. 28, 31, 70, 74 (i) Suspension of Aluminium oxide in binder (ii) Suspension of Tungsten Powder and Alumiunium oxide in binder (iii) Tungsten Rhenium Wire (iv) Triple Carbonate suspension of calcium, barium, strontium in binder Electron guns and electron gun parts. 66. 81 Tantalum Powder Tantalum Capacitors. 67. 39 Silicone based resins, oils, varnishes, lacquers, elastomers, with or without additives Semiconductor Devices, Liquid Crystal Displays, Electronic Valves and Tubes, Resistors (other than Heating Resistors), Connectors, Magnetic Tape, Relays, Potentiometers, Switches, Capacitor grade metallised plastic film, Piezoelectric crystal, Hybrid Microcircuits. 68. 28, 29, 38, 39 (i) Epoxy/Epoxide resins, compounds or encapsulants (ii) Fillers, thinners, hardeners, accelerators and fire retardants Capacitors, Semiconductor Devices, Liquid Crystal Displays, Electronic Valves and Tubes, Switches, Copper clad laminates of glass epoxy/paper epoxy type, Delay lines, Line and Wave Traps,Potentiometers, Silicon Crystals or Silicon wafers, Connectors, Resistors (other than Heating Resistors), Deflection compo ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... pper rods/ strips/sheets/wire/foils with or without plating Connectors, Relays, Switches, Gas discharge tubes. 82. 75 Nickel (unwrought) Cast alloy permanent magnets. 83. 79 Zinc wire of purity of 99.9% and above Plastic film capacitors, mixed dielectric capacitors. 84. 39 Double metallised plastic film Plastic film capacitors, mixed dielectric capacitors. 85. 39 Polypropylene moulding powder/granules Deflection components, Cassettes. 86. 39 Phenolic moulding powder/resin with or without fillers Potentiometers, Hybrid Microcircuits, cones, spiders and dust caps for loudspeakers. 87. 39 Polybutylene terephthalate Connectors, deflection components, switches, relays. 88. 39 Special purity nitrocellulose based binding solution Semiconductor devices. 89. 39, 40 (i) Polyphenelene sulphide (ii) Polyaryl sulphone Switches, connectors. 90. 39, 56 (i) Polyvinyl chloride film/sheet (ii) Non-woven cloth or liner (iii) Polyester liner (iv) PVC glue Floppy disks/diskettes, Floppy disk jacket, Head cleaning diskette. 91. 28, 38, 39, 75, 80 (i) Gold plating make up and replenisher solutions and salts (ii) Resins for gold recovery Semi Conductor Devices, ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... el film) for master artwork preparation Printed Circuit Boards, Semiconductor Devices, Potentiometers, Hybrid Micro- circuits 106. 69, 39, 75, 28 (i) Evaporation Boats or Ceramic (including Boron Nitride) (ii) Diffusion Pump oil or fluid Capacitor Grade Metallised Plastic Films. 107. 28, 68 (i) Graphite Beams (ii) Graphite Heaters (iii) Graphite Hot Zones Parts (iv) Aluminium Oxide Dressing Stick (v) Silicon Carbide Dressing Stick Semiconductor Devices, Silicon (in all forms). 108. 48, 59, 84 (i) Denim Paper (ii) Filter Cartridges (iii) Filter elements Magnetic Tape, Printed Circuit Boards. 109. 85 (i) Parts of Rotor Assembly (ii) Commutator assembly or parts thereof (iii) Brush assembly or parts thereof DC Micromotors upto 13.5 volts and not exceeding 20 watts rating. 110. 74, 85 Rayon or Silk cover Litz wire in the following sizes, namely :- RF/IF Coils or transformers. (i) 24 (strands) x 0.03 mm (diameter of each strand) (ii) 12 (strands) x 0.03 mm (diameter of each strand) (iii) 9 (strands) x 0.04 mm (diameter of each strand) (iv) 6 (strands) x 0.04 mm (diameter of each strand) (v) 8 (strands) x 0.03 mm (diameter of each strand) (vi ..... X X X X Extracts X X X X X X X X Extracts X X X X ..... tor devices, hybrid microcircuits. 125. 39 Heat shrinkable PVC sleeving, tubing, film or ring Capacitors, relays, deflection components. 126. 39 Splicing tape Magnetic tape, cassettes. 127. 39, 48, 85 Insulating/taping material (including pocket carrier tape) in tape, roll or strip form with or without adhesive Capacitors, deflection components, resistors (other than heating resistors), semiconductor devices, inductors. 128. 27, 34, 39 (i) Silicon grease (ii) Cyanoacrylate or anaerobic sealants (iii) Molybdenum based lubricating compound (iv) Kilopoise lubricating grease Potentiometers, tape deck mechanisms, switches, relays, heat sinks, electronic valves and tubes. 129. 28, 29, 34, 38, 81, 85 (i) Glass to metal seals (ii) Lead-Tin alloy rings/tablets/sticks (iii) Colloidal graphite (iv) Collophan Tantalum capacitors. 130. 85 Casings of aluminium Electrolytic capacitors. 131. 69, 85 Clips including short clips Switches, relays, magnetic heads, mica capacitors. 132. 39 ABS moulding compounds/powder/resin with or without fillers Relays, switches, connectors, tape deck mechanisms, potentiometers, RF/IF Coils. 133. 28, 39, 68, 73 Lapping vehicle ..... X X X X Extracts X X X X X X X X Extracts X X X X
|
