Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition - Standards of Input Output Norms (SION) - C. Engineering Products

C279 Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 47.80 gms/Watt 2 Copper wire bars/cathodes/rods/winding wires/strips 10.41 gm/Watt 3 Electrolytic grade aluminium for rotor 10.00 gms/Watt 4 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR 10.00 gms/Watt 4 CRCA Sheets for housing OR 15.00 gms/Watt 4 Mild Steel sheets for housing 10.99 gms/Watt 5 EN-8 Alloy Steel for shaft 9.65 gms/Watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) 10 Strain relief bush 1.00 No. 11 Pull chain switch with chord 1.00 No. 12 Aluminium alloy 0.50 kgs 13 Lead wire 1.175 Mtrs 14 Power supply chord 2 Nos. 15 CRCA Steel for end shields, mounting base, Lugs pads 1.50 kgs. 16 Open circuit switch 1.00 No. 17 Centrifugal gear 1.00 No. 18 Terminal/ Crimp cap 3 Nos. or 4 Nos.(as per requirement: quantity to be accounted for in the export product) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 3 or 4 sets (as per requirements quantity to be accounted for in the export product) 20 Plastic film for labels/ name plates 10 grams 21 Transfer ribbon for labels/ name plates 8 sq. inches