Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition - Standards of Input Output Norms (SION) - C. Engineering Products

C281 Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts OR Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition 1 No. 1 Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form 20.76 gms/Watt 2 Copper wire bars/cathodes/rods/winding wires/strips 2.76 gm/Watt 3 Electrolytic grade aluminium for rotor 2.80 gms/Watt 4 Commercial grade aluminium in ingot form (upto 99.5% purity) for housing OR 2.80 gms/Watt 4 CRCA Sheets for housing OR 4.20 gms/Watt 4 Mild Steel sheets for housing 4.88 gms/Watt 5 EN-8 Alloy Steel for shaft 1.98 gms/Watt 6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 7 Composite insulation material consisting of paper, nylon, polyester, amide, nomex films 1.5% of FOB price 8 Thermal protectors/thermo strips Net to net. 9 Power Capacitor 1 No. (Net to net) 10 Strain relief bush 1.00 No. 11 Pull chain switch with chord 1.00 No. 12 Aluminium alloy 0.50 kg 13 Lead wire 1.175 Mtrs 14 Power supply chord 2 Nos 15 CRCA steel for end shields, mounting base, Lugs pads 1.50 kgs 16 Open circuit switch 1.00 No. 17 Centrifugal gear 1.00 No. 18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product) 19 Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation 3 or 4 sets as per requirement quantity to be accounted for in the export product 20 Plastic film for labels/ name plates 10 grams 21 Transfer ribbon for labels/ name plates 8 sq. inches