Stainless Steel Rough Castings - Standards of Input Output Norms (SION) - C. Engineering Products

C394 Stainless Steel Rough Castings 1.00 MT 1 Major Raw Materials comprising of: a) Stainless Steel Melting Scrap 690 kgs. b) Iron Flakes/Pure Iron/Iron Powder 310 kgs. c) i) Ferro Chrome ii) Charge Nickel Oxide Sinter/Ferro Nickel OR 320 kgs. 1 c) i) Ferro Chrome 70 Kgs ii) Nickel 100 Kgs iii) Ferro Manganese 10 kgs. iv) Ferro Molybdenum v) Ferro Silicon 50 kgs. 20 kgs. 2 Additives comprising of : 5 kgs a) Core Wire/Scrap/Ingot/Shots of Aluminium b) Core Wire/Lumps/Powder of Calcium Silicide (CaSi) c) Selenium d) Lumps/Powder of Misch Metal 3 Misc. Items: a) i) Resin Coated Sand 1250 kgs. ii) Organic Binders 160 kgs. 3 b) i) Graphite Electrode 6 kgs. ii) Welding Electrode 10.00 kgs. iii) Mould Wash/ Mould Coat 25.00 kgs. iv) Grinding Wheel 5.00 kgs. v) Refractories: a) Porous Plugs/Seat Blocks/Sleeves/Slide Gate plates b) Direct Bonded Basic Bricks c) Monolithic/Gunning/Ramming/Castables d) Dolomite/Magnesia Carbon Bricks 30.00 kgs. vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 Cobalt 60) 9440 Sq. Cm. 4 Furnace Oil/Diesel Oil for: i) Ladle Heating ii) Mould Heating iii) Heat Treatment 212 Ltrs. Note: 1. The above norm is applicable only if the export product is manufactured through Electric Arc Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be allowed. 3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be Multiplied by factors as given below: a) Less than 10 kg/piece: = 1.36 b) 10 kgs. to 100 kgs/piece: = 1.25 c) More than 100 kgs/piece= 1.15