Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified - Standards of Input Output Norms (SION) - C. Engineering Products

C1509 Identifiable ready to use machined parts/ components made wholly or predominantly of Carbon Steel/ Non Alloy Steel (not less than 90% by weight) manufactured through Casting Process, not elsewhere specified 1MT 1 Major Raw materials comprising of Carbon Steel/ Non-Alloy Steel Melting Scrap 1700 kgs. 2 Additives comprising of: 50 kgs. a) Core Wire/ Scrap/ Ingots/ Shots of Aluminium b) Core Wire/ Lumps Powder of Calcium Silicide (CaSi) c) Lumps/ Powder of Misch Metall d) Ferro Silicon e) Ferro Manganese 3 Miscellaneous items: a) i) Resin Coated Sand ii) Organic binders 450 kgs 200 kgs. b) i) Graphite electrode ii) Welding Electrode iii) Mould Wash/ Mould coat iv) Grinding Wheel v) Refractories: 7.5 kgs 12.5 kgs 31 kgs 6kgs 37.5 kgs a) Porous Plugs/ Seat Blocks/ Sleevers/ Slide Gate Plates b) Direct Bonded Basic Bricks c) Monolithic/ Gunning/ Ramming/ Castables d) Dolomite/ Magnesia Carbon Bricks vi) Industrial X-Ray Film (Various Grades for Gamma Rays Iridium 192 Cobalt 60) 9440 Sq. Cm. 4 Furnace Oil/ Diesel Oil for i) Ladle heating ii) Moulding Heating iii) Heat Treatment 265 Ltrs. 1. The above norm is applicable only if the export products are manufactured through electric Arc Furnace/ Induction Finance Route using melting Scrap as Shown at item No. 1(a) 2. In case the products are manufactured through the Induction Furnace route,item 3(b)(i) will not be allowed 3. The above norms are for the export product wholly made of Non Alloy Steel. For the export product constituting less than 100% and upto 90% Non Alloy Steel by weight,the import requirements of import items at S.No. 1 to 3 shall be proportionately reduced.