Alloy Steel (Other than Stainless Steel) Wires (from melting scrap) - Standards of Input Output Norms (SION) - C. Engineering Products

C458 Alloy Steel (Other than Stainless Steel) Wires (from melting scrap) 1000 kgs 1 Non alloy steel melting scrap 1200 kgs 2 Graphite Electrode 6 kgs 3 Cored wire/ lumps/ powder of calcium silicide (CaSi) 1 kgs 4 Rolls/ Tungsten carbide rings for rolling mills 1.77 kgs 5 Copper Mould 0.0007 Nos 6 Silico Manganese OR Qty in Kgs as in Formula (1) of Note 6 a) Ferro Silicon Qty in Kgs as in Formula (2) of Note 4 b) Ferro Manganese Qty in Kgs as in Formula (3) of Note 4 7 Refractory comprising of : 15 kg a) Zirconia/ magnesia nozzles b) Aluminium-graphite nozzles/ monoblock stoppers/ stopper heads/ stopper rods/ shrouds c) Porous plugs/ seat blocks/ sleeves/ slide gate plates d) Direct bonded basic bricks e) EBT Tubes/ mass/ bricks f) Monolithic/ gunning/ ramming mass/ castables g) Dolomite/ magnesia carbon bricks 8 Other ferro alloy(s) (Including charge/ ferro nickel/ charge chrome etc) provided the alloying element(s) is/are actually present in the export product Qty of each ferro alloy in kg as in formula (iv) of note 4 9 Casting powder 2 kgs 10 Saw/ shear blade 0.01 kg 11 Copper scrap/ Copper Cathode/Copper Wire Bar/Copper Rods (if copper is actually present in the steel) 0.04 kg 12 Furnace oil (For captive power plant only) 70 kgs 13 Furnace oil for oil fired reheating furnace in the rolling mill 50 kgs 14 Furnace oil for ladle heating 6 kgs 15 Lubricant (for captive power plant) 0.65 kgs 16 Low silica lime stone 100 kgs 17 Cored wire/ scrap/ ingots of aluminium 1 kg 18 Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only) 2.5 kgs 19 Raw petroleum coke 5 kgs 20 Ceramic coated lancing pipe 1 No 21 Temperature tips 0.50 No. 22 Sampler tips 0.25 No. 23 a) Dry drawing lubricant/ coating 8 kgs b) Wire drawing soap 7 kgs c) Tungsten carbide dies 5 No d) Wet drawing lubricant/ coating 4 kgs e) Plastic bobbins/ spools 300 Nos Note: 1. The above norms is applicable only if the export product(s) is manufactured through electric arc furnace route/ induction furnace route using steel scrap as basic raw material. 2. Value of consumable item at Sl.No 2, 4, 5,7 (a to g) 9,19,20,21,22,23 (a to e) shall not excced 25% of the total CIF value of the licence. 3. In case the product(s) is manufactured through induction furnace route, the item at Sl.No.(2) will not be allowed. 4. (i) 5.50 X(mean average of % manganese content+mean average of % Silicon content in Steel) (ii) 1100 X (mean average of % Silicon content in Steel)divided by (mean average of % siliconcontent in ferro silicon). (iii) 1100 X (mean average of % Manganese content in steel) divided by(mean average of % Manganese content in ferro manganese) (iv) 1100 X (Mean average of % alloy content in steel)devided by (mean average of% alloy content in respective ferro alloy. 5. Import of Items at Sl.No.23(d to e) would be allowed against export of wire below 1mm only