Non alloy steel Galvanised wire - Standards of Input Output Norms (SION) - C. Engineering Products

C506 Non alloy steel Galvanised wire 1000 kgs 1 a) Copper scrap/Ingots (if copper is present in the export product) 0.04 kg b) Zinc 40 kgs c) Lead 3.3 kgs d) i) Furnace Oil (only for units with captive power plants) 30 kgs ii) Lubricant (only for units with captive power plant) 0.65 kg 1 e) i) Furnace oil for oil fired reheating furnace in rolling mill 50 kgs ii) Furnace oil for ladle heating 6 kgs 1 f) Cored wire of lead/lead shots (in case of export of lead bearing free cutting steel sheet only) 2.5 kgs 2 MAJOR INPUTS : a) Non Alloy steel Melting scrap/Direct Reduced Iron (HBI/Sponge Iron) 360 kgs b) Low Silica Lime Stone 218 kgs c) Metallurgical Coke 610 kgs 3 i) ADDITIVES a) Cored wires/lumps/powder of Calcium Silicide (CaSi) 1 kg b) Silico Manganese OR 16 kgs i) Ferro Silicon 6 kgs ii) Ferro manganese 10 kgs c) Raw Petroleum coke 5 kgs d) Cored wires/scrap/ingots/ shots of aluminium 1 kg ii) MISC. ITEMS: a) Graphite Electrode 6 kgs b) Rolls/Tungsten Carbide rings for rolling mill 1.77 kgs c) Copper lined mould/ Copper mould for casting 0.013 kgs d) Saw/Shear Blade 0.01 kg e) Ceramic coated lancing pipe 0.25 No. f) Temperature Tips/Celox inserts 0.05 No. g) Sampler tips 0.05 No. h) Submerged tuyers/ Oxygen lance pipe /Oxygen Super Sonic lance /tip. 0.77 kgs i) Atmospheric injector 4 kgs j) Casting Powder 2 kgs k) Silica Texture bellow Shroud 0.0052 kg iii) WIRE DRAWING MISC. ITEMS: a) Dry drawing lubricant 8 kgs b) Wire drawing soap 7 kgs c) Wet drawing lubricant 4 kgs d)Tungesten carbide dies 5 Nos. e) Plastic bobbins/spools 300 Nos. iv) REFRACTORY ITEMS: 10 Kg a) Runner Mass/castable for Mini Blast Furnace (MBF) b) Graphite Carbon refractories for Mini Blast Furnace (MBF) c) Magnesia reagent/ Desulphurisation compound d) Zirconia /Magnesia Nozzles e) Aluminium Graphite Nozzles/Monobloc Stopers/Stoper heads/ Stoper Rods/Shrouds f) Porous Plugs/seat Blocks/Sleeves/Slide Gate Plates g) Direct Bonded basic Bricks h)EBT Tube/Mass/Bricks i) Monolithic/Gunning/ Ramming Mass/Castables j) Dolomite Magnesia Carbon Bricks Note 1. The above norms is applicable only if the export product(s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace. 2. Import of item atSl.No.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm dia only. 3. Import of Direct Reduced Iron shall be limited to 10% of total metallic input of 360Kg. Mentioned at item 2(a).