Hot rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coil - Standards of Input Output Norms (SION) - C. Engineering Products

C2003 Hot rolled Non-alloy Steel (Pickled/ Un-pickled) Plates/ Sheets/ Strips/ Wide Coil 1MT 1 Non-alloy Steel melting Scrap, Pig Iron/Hot Metal, Sponge Iron including Hot Briquetted Iron (HBI) 1150 kg 2 Low Silica Lime Stone 76 kg 3 a) Bulk Ferro Alloys (Ferro Silicon/ Ferro Manganese/ Silicon Manganese) 8.4 kg b) Special Ferroalloys/ metals (Ferro Chrome/ Ferro Vanadium/ Ferro Niobium/ Nickel Oxide Sinter/ Ferro Nickel/ Ferro Aluminium/ Ferro Titanium/ Ferro Boron/ Ferro Phosphorous/ Magnesium Metal/ Ferro Molybdenum) 2.6 kg 4 Additives: a) Aluminium wires/ scraps/ shots/ ingots and/ or Aluminium Powder in Cored wire. 3.0 kg b) CaSi/ caf Lumps, CaFeAL/ caFe/ CaSi Powder in Cored wire 0.5 kg c) Met coke/ Raw Pet. Coke/ Coke/ Calcined Pet Coke 4 kg 5 Consumables/ Misc. a) Rolls for caster and rolling mill 0.5 kg b) Copper mould for casting 0.02 kg c) Casting Powder 1 kg d) Rolling Mill Oil/ Hydraulic Oil/ Lubricating Oil 3 kg e) Celox Inserts/ Oxygn Probes/ Sampler Probes 0.10 kg f) Shear Blades/ Saw Blades 0.01 kg g) Oxygen Lance Pipes 0.12 kg h) Temperature Tips/ Sampler Tips/ Thermodynamic elements 0.20 kg I) Graphite Electrodes 2.4 kg 6 Refractories: a) Shaped Refractories (Fired/ Unfired Bricks/ Shapes) 3 kg b) Monolithic Refractories (including Castables, ramming mass/ gunning mixes) 6 kg c) Special Refractories i.e. C.C. refractory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate refractory, Porous Plug, Zircon/ Zirconia Nozzles Tundish Nozzles 1 kg 7 Energy Sources: a) LPG (for Supersonic Oxygen lance in EAF) 4 kg b) LDO (or preheating of ladle and heating of thin slab in tunnel furnace) 20 kg c) Natural Gas/ LNG (for Tundish SEN heating) 0.25 SCM Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace (CONARC process) - Thin Slab Caster - Hot Strip Mill. Note: 2. Quantity of Pig Iron/ Hot Metal and Sponge Iron/ HBI allowed against S. No. 1 shall not exceed 60% and 35% respectively of the total quantity permitted therein. Note: 3. Import of Silico manganese allowed at S. No. 3 (a) shall not exceed 60% of the total quantity of import. Note: 4. Special Ferro Alloy (s)/Metal against S. No. 2 (b) will be allowed only if the respective alloying elements (s)/ metal is/ are actually present in the export product.