Cold Rolled Galvanised Non Alloy Steel Sheets/hoops & Strips/Wide Coils - Standards of Input Output Norms (SION) - C. Engineering Products

C482 Cold Rolled Galvanised Non Alloy Steel Sheets/hoops Strips/Wide Coils. 1000 kgs 1 i) Copper Cathode/Copper Wire Bar/Copper Rods (if copper is present in the export product) 0.04 kg ii) Copper Plates/Micro alloyed copper plate (for use in copper lined casting moulds) 0.1 kg iii) Zinc 40 kgs iv) Furnace Oil/LSHS/Naptha 13 kgs 2 MAJOR INPUTS: a) Non-Alloy Steel Melting Scrap 330 kgs b) Pig Iron 31.774 kgs c) Low silica lime Stone 620 kgs d) Coking Coal OR 1000 kgs Metallurgical Coke 700 kgs 3 i) ADDITIVES: a) Cored wires/scraps/ shots/ ingots of aluminium 1.466 kgs b) Ferro Niobium 0.035 kg c) Ferro Vanadium 0.004 kg d) Ferro Silicon/Ferro Manganese/ Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide sinter/Ferro Nickel/charge chrome provided the alloying element(s) is/are actually present in the export product. 17.000 kgs e) Calcium Silicide (CaSi) 1.5 kg f) Raw Petroleum Coke 2.3 kgs 3 (ii) Miscellaneous Items: i) Silicon Carbide Grains 2.0 kgs ii) Rolls/Tungsten Carbide rings for Rolling Mill 1.77 kgs iii) Celox Inserts/Oxygen measuring probes 0.004 kg iv)Thermodynamic elements 0.325 kg v) Magnesia Reagent/ Desulphurisation Compound 0.006 kg vi) Silica Gel/Mobile Sorbead 0.010 kg vii) Freon Gas-142/114(Net of Cylinders) 0.010 kg viii) Stainless steel Hoses 0.007 kg ix) Shear Blades/Saw Blade 0.010 kg x) Oxygen Lance Pipe 0.750 kg xi) Rolling Mill Oil 0.500 kg xii) Casting Powder 2.083 kgs xiii) Temperature Tips 0.022 kg xiv) Canned Elements/Pearmeable elements for combined blowing 0.200 kg xv) Graphite electrodes (only those having VADR facilities) 1.000 kg xvi) Welding flux 8.00 kgs xvii) Weld wire 4.00 kgs xviii) Surface protection film 13.30 kgs xix) Refractory Bricks/ Shapes and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Bricks/ Shapes 9 kgs xx) Monolithic Refractory viz. Castables, Gunning Mass Ramming Mass and/or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory 5 kgs xxi) Specialty Refractories namely Continuous Cast Refractories (such as Shrouds, Mono Block Stoppers and Sub-Entry Nozzles), Slide Gate Refractories, Porous Plug, Zircon/ Zirconia Nozzles and Tundish Nozzles 1 kg Note 1. The above norm is applicable only if the export product(s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 2. Items at Sl.Nos. 3(i) (b c) would bepermitted only if the Alloying Elements, viz. Niobium and Vanadium is present in the export product.