SION - HB Vol.2 Amended/ Added - DGFT - 21(PN)/1997-2002

SION - HB Vol.2 Amended/ Added Public No. 21(PN)/1997-2002 DATED 30-6-1997 Attention is invited to Paras 7.8,7.9 and 7.10 of Handbook of Procedures, Vol.1 1997-2002, published under the Ministry of Commerce Public Notice No. 1/1997-2002 dated 31-3-1997 and Handbook of procedure, Vol. 2, 1997-2002 published under the Ministry of Commerce Public Notice No. 2/1997-2002 dated 31-3-1997. 2. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedure, Vol. 2, amendments / corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 3. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below :- CHEMICALS AND ALLIED PRODUCTS (1) After Entry No. A-1921, the new entries from Sl. No. A-1992 to A-1934 shall be added as per annexure "B" to this Public Notice. ENGINEERING PRODUCTS (2) After Entry No. C-1238, the new entries from Sl. No. C-1239 to C-1279 shall be added as per Annexure "C" to this Public Notice. LEATHER AND LEATHER PRODUCTS (3) After Entry No. G-44, the new entry as Sl. No. G-45 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS (4) After Entry No. H-353, the new entries from Sl. No. H-354 to H-358 shall be added as per Annexure "E" to this Public Notice. MISCELLANEOUS PRODUCTS (5) After Entry No. K-101, the new entry as Sl. No. K-102 shall be added as per Annexure "F" to this Public Notice. This issues is public interest. Annexure "A" to Public Notice No. 21 Dated 30-6-1997 AMENDMENTS / CORRECTIONS Sl. No. Page NO. Reference Amendments / Corrections (1) (2) (3) (4) 1 172 Chemicals and Allied products Sl. NO. A1371 Note below this entry shall be deleted. 2 213 Chemicals and Allied products Sl. No. A1683 1. The description of the export product shall be corrected to read as under:- "EPDM Rubber Grade H-539". 2. Import items 3 and 7 shall be cottected to read as "Ethylidene Norbornene" and "Poly Propulene Glycol" respectively. 3. 217 Chemicals and allied products Sl. No. A1692 1. The description of the export product shall be emended to read as under :- "Nylon / Cotton Tyres (Coloured)". 2. The description of the Import item I shall be amended to read as under :- "Nylon / Cotton Tyre Cord / Wrap Sheet (only relevant item used / to be used is to be allowed)". The quantity will remain unchanged. 4. 220 Chemicals and Allied products Sl. No. A1705 The quantity of import item 2 shall be amended to read as "0.076 kg". 5. 220 Chemicals and Allied products Sl. No. A1706 1. The quantity of import item 2 shall be amended to read as "0.076 kg". 2. The description of import item 3 with quantity shall be substituted by the following :- "3. Aluminium Foil - Net to net. Whether or not Printed Laminated with any one or in all combination of the following items :- a) Cellophane b) Polyethalene c) Paper d) Paper Board e) Plastics f) Other backing material". 6. 222 223 Chemicals and Allied Products Sl. No. A1718 After item 2, the following item with quantity shall be added in the relevant column:- "3. Lubricating Powder (constrarch)" - 2 kg 7. 344 Engineering Products Sl. No. C23 In the description of the export product and import item 3, the word "painted" and "Paint" respectively shall be substituted by "coating material as Silico and PTEF Base". 8. 347 Engineering Products Sl. No. C57 The description of import item 5, shall be amended to read as under. "Nickel Bars / Rods". 9. 377 Engineering Products Sl. No. C204 The Norms covered by this entry shall be substituted by the following :- Sl. No. Export Item Import item Name Qty. Name Qty. (1) (2) (3) (4) (5) C204 Electromechanical Domestic Appliances with self-contained motor; Vacumizer set, one set consisting of Vacumizer pump or Vacumizer Pump (UL approved) or / and Vacuseal containers of relevant sizes 1 No. 1. Switches Net to Net. 2. Thermal Protector Net to Net. 3. Fitters Net to Net. 4. Polyslider Tape Net +5% wastage. 5. ABS Granules Net +5% wastage. 6. Polycarbonate Net +5% wastage. 7. Polypropylene for Vacumizer Pump 0.029 kg / Pump. 8. Thermoplastics(Evpreme) for Vacumizer Pump. 0.003 kg / Pump 9. Styrene Acrylonitrile for Vacuseal for containers of relevant sizes 1.05 kg / kg content in the export product. 10. Polyplropulene for Vacuseal containers of relevent sizes 1.05 kg/kgcontent in the export product. 11. Thermoplastics (Evoprene) for Vacuseal containers of relevant sizes. 1.05 kg/kg content in the export product. 12. Polupropylene for Vacumizer Pump 1.05 kg/kg content in the export product. 13. Thermoplastic (Evoprene) for Vacumizer Pump 1.05 kg/kg content in product. 14. Core for Silencer (Fotters) Net to Net. 15. Motor Net to Net. 16. TOD Switches Net to Net. 17. Power Cord with Plug Net to Net. 18. Cable (Single /Multi Core Copper Wire) Net to Net. 19. KSS Wire Copper Connector Net to Net. 20. Flame Retardant ABS for Vacumizer Pump 1.05 kg/kg content in the export product. 21. Nylon Polymers for Vacumizer Pump 1.05 kg/kg content in the export. 22. Drop-in-insert (Paper Brochures) Net to Net. 23. Labels (Mylar Stickers) Net to Net. 24. Colour cartons Net to Net. 10. 434 Engineering Products Sl. No. C418 The description of the export product shall be substituted by the following:- "High Tensile Precision Industrial Wrenches/ Socket Keys of different Cross Section". 11. 489 to 492 Engineering Products Sl. No. C533, C834, C536 C537, C539, C540 and C545 In item No. 2, the following alternative item with quantity shall be added in the respective column:- "OR" Gasket Tube of relevant length". - Net + 2% Wastage, 12. 491 492 Engineering Products Sl.No. C544 After import item 2, following item alongwith quantity shall be added:- "3. Gasket- Net to Net. Gasket Tube of wastage length". - Net + 2% relevant 13. 630 Engineering Products Sl. No. C1226 Below the norms covered by this entry the following note shall be added:- "Note, In case, the export product is galvanised, in addition to the above item, Zinc @4% of Net weight of Steel to be galvanised may be allowed." 14. 788 789 Plastic Products Sl. No. H315 Item Nos. 1 2 with quantity shall be amended to read as under:- "1. Polyester Film - 102 kgs OR 1. a) D.M.T. - 106.99 kgs b) M.E.G. - 40.75 kgs". Consequently, the existing item Nos. 3 to 12 shall be re-numbered as item Nos. 2 to 11 in seriatim. 15. 789 Plastic Products Sl. No. H317 Item Nos. 1 2 with quantity shall be amended to read as under:- "1. Polyester Film - 148.985 kgs OR 1. a) D.M.T. - 156.145 kgs b) M.E.G. - 59.489 kgs". Consequently, the existing item Nos. 3 to 13 shall be re-numbered as item Nos. 2 to 12 in seriatim. 16. 856 Miscellaneous Products Sl. No. K14 The norms covered by this entry shall be a substituted by the following:- K14 Cast Coated Paper 1 kg 1. Relevant Paper in Jumbo Rolls 1.05 kg/kg content in export. 2. Latex 0.038 kg 3. Casein 0.014 kg 4. Clay 0.165 kg 5. Potassium oleate 0.012 kg Annexure "B" to Public Notice No. 21 Dated 30-6-1997 CHEMICALS AND ALLIED PRODUCTS A1922 EDPM Grade H-563 1 kg 1. Ethylene 0.616 kg 2. Propylene 0.684 kg 3. Ethylidene Norbomene 0.067 kg 4. Hexane 0.083 kg 5. Ethyl Aluminium Sesquichloride 0.018 kg 6. Vanadium Oxytrichloride 0.002 kg 7. Polypropylene Glycol 0.006 kg 8. Antoxidant 0.007 kg A1923 EDPM Grade H-301T 1 kg 1. Ethylene 0.748 kg 2. Propylene 0.352 kg 3. Dicylopentadiene 0.047 kg 4. Hexane 0.083 kg 5. Ethyl Aluminium Sesquichloride 0.010 kg 6. Vanadium Oxytrichloride 0.006 kg 7. Antioxidant 0.007 kg 8. MBEY (WAND) 0.003 kg A1924 Heat Resistant Rubber Tension Tape / Heat Resistant cut Rubber Thread 1 kg 1. Natural Rubber 0.90 kg 2. Synthetic Rubber (SBR-1502/SBR-1815) 0.03 kg 3. Activator such as Zinc Oxide 0.030 kg 4. Antioxidants 0.033 kg 5. Accelerator 0.020 kg 6. Peptisizers 0.001 kg 7. Retarder 0.0005 kg 8. Vulcanising Agent 0.008 kg 9. Filler such as Calcium Carbonater, Silica, Silica Clay etc. 0.060 kg 10. Co-Activator 0.008 kg 11. Pigment / Dyes 0.057 kg A1925 Longifolene 1 kg 1. Cum Turpentine Oil (Heavy Grade) 1.69 kg A1926 Lansoprazole Pellets 8.5% 1 kg 1. 2 3 Lutidine 0.445 kg 2. 2, 2, 2 Tri Fluoro 0.467 kg 3. Methylene Chloride 2.70 kgs 4. Acetone 2.43 kgs 5. Hydroxy Propyl Methyl Cellulose Phthalate 0.05 kg 6. Cellulose Acetate Phthalate 0.114 kg 7. Mannitol 0.68 kg Note : The above norms is valid upto 31.3.98. A1927 Vat Ikuve Green B Dry Powder (Vat content 98%) 1 kg 1. Abthraquinone 1.400 kg 2. Bromine 0.508 kg 3. Glycerine 0.398 kg 4. Iron Powder 0.357 kg 5. Toluene 0.707 kg 6. Caustic Potash Flakes 0.707 kg 7. Caustic Soda Flakes 0.688 kg A1928 Phenyl Ethyl Acetate 1 kg 1. Phenyl Ethyl Alcohol 0.806 kg 2. Acetic Anhydride 0.2 kg A1929 3-Pripinamide Aniline (3-Amino Propionyl Anilide) (Purity 97%) 1 kg 1. Propinic Anhydride 0.65 kg A1930 4-Propionamide Aniline (3-Amion Propionyl Anilide) (Purity 97%) 1 kg 1. Propionic 0.880 kg A1931 Medical Cream / Ointments 1 kg 1. Relevant Bulk Drug (s) 1.02 kg/kg content of the bulk Drug in the export product. A1932 Amitriptyline 1 kg 1. Phenyl Ethyl Benzoic Acid 0.93 kg 2. Bromo Chloro Propane 0.72 kg 3. Tetra Hydro Furan 0.53 kg A1933 3-Methyl Xanthine 1 kg 1. Monochlore Acetic Acid 1.18 kg 2. Sodium Cyanide 0.71 kg 3. Methyl Isobytyl Ketone 0.27 kg 4. Monomethyl Urea 0.85 kg 5. Acetic Anhydride 1.40 kg 6. Sodium Nitrite 0.67 kg 7. Formic Acid 0.50 kg 8. Activated Carbon 0.06 kg 9. 5% Palladium on Charcoal 0.006 kg A1934 6-Amino-1, 3-Di Methyl Uracil 1 kg 1. Monochloro Acetic Acid 0.80 kg 2. Sodium cyanide 0.42 kg 3. Methyl Isobytyl Ketone 0.27 kg 4. Acetic Anhydride 1.10 kg 5. Di Methyl Urea 0.71 kg 6. Activated Carbon 0.09 kg Annexure "C" to Public Notice No. 21 Dated : 30-6-1997 ENGINEERING PRODUCTS C1239 Indexable Tool Holder 1 No. 1. Clamping Elements Net to net. 2. Toggle Levers Net to net. 3. Clamping Screws Net to net. 4. Driver for screws (Torx keys) Net to net. 5. Shim Pins Net to net. 6. Tungsten Carbide Shims Net to net. 7. Tungsten Carbide Inserts (Consumable) Upto 2% of FOB value of export. C1240 Oxide Bonded Silicon Carbide Refractory 1000 kgs 1. Silicon Carbide Crude 1225 kgs 2. Micro Silica 75 kgs 3. Calcuim Ligno-Sulphonate (Lithopix) 40 kgs PARTS OF SEWING MACHINE A. CAST IRON PARTS C1241 TT Cam 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.02 kg C1242 Shuttle Race Complete 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1243 Clamp Stop Montion 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1244 Crank 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1245 Needle Clamp 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1246 Feed Regulator 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1247 Feed Fork 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg C1248 Feed Driven Rock 1 kg 1. Pig Iron / Scrap Shaft Crank 1.00 kg 2. Steel Scrap 0.20 kg C1249 Feed Lifting Rock Shaft 1 kg 1. Pig Iron / Scrap 1.00 kg 2. Steel Scrap 0.20 kg B. SHEET METAL PARTS C1250 Shuttle Race Ring 1 kg 1. CRCA Sheet 2.00 kg C1251 Shuttle Driven 1 kg 1. CRCA Sheet 2.00 KG C1252 Face Plate Complete 1 kg 1. CRCA Sheet 1.30 kg C1253 Slide Plate 1 kg 1. CRCA Sheet 1.07 kg C1254 Tension for Plate 1 kg 1. CRCA Sheet 1.00 kg C1255 Bobbincase 1 kg 1. CRCA Sheet 0.6 kg 2. MS Alloy Steel Bar / Rod 3.0 kgs C1256 Bobbin Winder 1 kg 1. CRCA Sheet 1.5 kg C1257 Lifter 1 kg 1. CRCA Sheet 1.33 kg C1258 Thread Take Off Lever 1 kg 1. CRCA Sheet 2.00 kg C. MISCELLANEOUS PARTS C1259 Roller for Regulator 1 kg 1. MS / Alloy Steel / Bars / Rods 1.5 kg C1260 Pressure Bar Thumb Screw 1 kg 1. MS / Alloy Steel / Bars / Rods 1.25 kg C1261 Pressure Foot 1 kg 1. MS/Alloy Steel/Bars/Rods 1.40 kg C1262 Feed Cam 1 kg 1. MS/Alloy Steel/Bars/Rods 1.40 kg C1263 Needle Bar Bushing 1 kg 1. MS/Alloy Steel/Bars/Rods 1.6 kg C1264 Link Body 1 kg 1. MS/Alloy Steel/Bars/Rods 1.6 kg C1265 Stud for link 1 kg 1. MS/Alloy Steel/Bars/Rods 1.3 kg C1266 Arm Shaft 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1267 Head Hinges 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1268 Pitman with Rod 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1269 Stand Fitting 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1270 Pitman Crank 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1271 Shuttle Hook 1 kg 1. MS/Alloy Steel/Bars/Rods 7.37 kg C1272 Centre Small Screw with Nuts 1 kg 1. MS/Alloy Steel/Bars/Rods 1.25 kg C1273 Needle Plate 1 kg 1. MS/Alloy Steel/Bars/Rods 1.40 kg C1274 Pressure Bar 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1275 Screw Nut for Feed Fork 1 kg 1. MS/Alloy Steel/Bars/Rods 1.25 kg C1276 Needle Bar 1 kg 1. MS/Alloy Steel/Bars/Rods 1.20 kg C1277 Screw Nut for CC Rod 1 kg 1. MS/Alloy Steel/Bars/Rods 1.25 kg C1278 Shuttle Race Spring 1 kg 1. MS/Alloy Steel/Bars/Rods 2.00 kg C1279 O/S Rock Shaft 1 kg 1. MS/Alloy Steel/Bars/Rods 1.1 kg Annexure "D" to Public Notice No. 21 Dated : 30-6-1997 LEATHER AND LEATHER PRODUCTS (1) (2) (3) (4) (5) G45 Gents Leather Half Boot Lasted Upper 1 Pair 1. a) Sybthetic Lining 3.75 sq.ft. b) Adhesive (Latex) 12 gms c) Stamping Foil 6 sp. Inches d) Sewing threads 50 mtrs. e) Thermoplastic Sheet for i) Counter 0.014 sq.mtr. ii) Toe Caps / Puffs 0.009 sq.mtr. f) Re-inforcement Tape (Max. width 1.5 c.m.) 1.10 mtr. g) Sheets for making insole 0.050 sq.mtr. h) Nails / Tacks 15 gm. i) Shoe Lace 1 Pair j) Labels / Logos Net content+1% wastage. k) Eyelets Net content+1% wastage. l) Metallic Fitting Net content+1% wastage. m) Zip Fastners Net content+1% wastage. n) Elastic Net content+1% wastage. o) Velcro tape Net content+1% wastage. 2. a) Clicking Boards 1 No./7500 pairs. b) Binding Guage 1 No./10000 pairs. c) Industrial Sewing machine needles / hammer needle 40 Pcs./1000 pairs. d) Bell / Skiving Knives 1 No./2250 pairs. e) Band Knives for splitting M/C. 1 No./2250 pairs. f) Grinding wheels 2 No./1000 pairs. g) Feed Rollers 1 No./1000pairs. h) Silver marking pencils / pens/refils 1 No./1000 pairs. i) Abrasive paper /emery paper / belts /cup shapes 1 Sq.mtr./150 Pairs. j) Sea Sponge 2 Pc./1000 pairs. m) Plastic Shoe Last 4 Pairs/1000pairs. Annexure "E" to Public Notice No. 21 Dated : 30-6-1997 PLASTIC PRODUCTS (1) (2) (3) (4) (5) H354 Nylon Cord / Twine 1 kg 1. Nylon Yarn of relevant grade / denier 1.02 kg H355 Ploypropylene Staple Fibre 1 kg 1. Polypropylene Resins /Granutes 1.05 kg 2. Master Batches 0.04 kg 3. Spin Finish Oil 0.009 kg 4. U.V. Stabilizers 0.006 kg 5. Anti Static Oil 0.006 kg H356 Articles made of LLDPE 1 KG 1. LLDPE Granules 1.05 kg/kg content in the export H357 Nail Polish Brush 1 kg 1. Nylon Monofilament of relevant grade/derier 1.05 kg/kg content in the export product. 2. LDPE Granules 1.05 kg/kg content in the export product. 3. Stainless Steel Wire if relevant gauge 1.01 kg/kg content in the export product. H358 TPR Sole 1 kg 1. TPR Granutes Styrene Butadiene styrene Oilbound copolymer SBS Oil Bound Popolymer 1.015 kg/kg content in export. Annexure "F" to Public Notice No. 21 Dated : 30-6-1997 MISCELLANEOUS PRODUCTS (1) (2) (3) (4) (5) K102 Cast Coated Board 1 kg 1. Relevant Paper Board in Jumbo Rolls 1.05 kg/kg content in export. 2. Latex 0.023 kg 3. Casein 0.009 kg 4. Clay 0.106 kg 5. Potassium Oleate 0.007 kg