SION - HB Vol II - Amended/ Added - DGFT - 05 (RE-98)/1997-2002

SION - HB Vol II - Amended/ Added Public Notice No. 5(RE-98)/1997-2002 dated the 15th April, 1998 Attention is invited to Paras 7.8, 7.9 and 7.10 of Handbook of Procedures, Vol.1, 1997-2002, published under the Ministry of Commerce Public Notice No.1/1997-2002 dated 31.3.1997 and Handbook of Procedure, Vol.2, 1997-2002 published under the Ministry of Commerce Public Notice No.2/1997-2002 dated 31.3.1997. 2. In the statement of Standard Input-Output Norms as contained in the Handbook of Procedure, Vol.2, amendments / corrections at appropriate places as mentioned in Annexure "A" to this Public Notice shall be made. 3. In the statement of Standard Input-Output Norms, following additions shall be made at appropriate places as mentioned below:- CHEMICALS AND ALLIED PRODUCTS After Entry No.A-2026, the new entries from Sl.No.A-2027 to A-2062 shall be added as per Annexure "B" to this Public Notice. ENGINEERING PRODUCTS After Entry No.C-1328, the new entries from Sl.No.C-1329 to C-1344 shall be added as per Annexure "C" to this Public Notice. FOOD PRODUCTS After Entry No.E-68, the new entries from Sl.No.E-69 to E-70 shall be added as per Annexure "D" to this Public Notice. PLASTIC PRODUCTS After Entry No.H-370, the new entries from Sl.No.H-371 to H-382 shall be added as per Annexure "E" to this Public Notice. TEXTILE PRODUCTS After Entry No.J-297, the new entries from Sl.No.J-298 to J-299 shall be added as per Annexure "F" to this Public Notice. MISCELLANEOUS PRODUCTS After Entry No.K-109, the new entries from Sl.No.K-110 to K-111 shall be added as per Annexure "G" to this Public Notice. This issues in public interest. Sd/- (N.L. LAKHANPAL) DIRECTOR GENERAL OF FOREIGN TRADE Annexure "A" to Public Notice No.5(RE-98) Dated : 15.04.98 AMENDMENTS / CORRECTIONS Sl. No. Page No. Reference Amendments / Corrections (1) (2) (3) (4) 1. 6 Chemicals Allied Products Sl.No.A1 The norms covered by this entry shall be deleted. 2. 17 Chemicals Allied Products Sl.No.A68 After import item 2(b), following alternative item with quantity shall be added in the respective columns "OR 2. D(-)Alpha Phenyl-Glycine Ethyl Aceto Acetate Potassium Dane Salt". 0.94 kg 3. 18 Chemicals Allied Products Sl.No.A69 After import item 3(b), following alternative item with quantity shall be added:- "OR 2. D(-)Alpha Phenyl-Glycine Ethyl Aceto Acetate Potassium Dane Salt". 0.94 kg 4. 29 Chemicals Allied Products Sl.No.A140 The description of the export product shall be corrected to read as under:- "CIS + Hydroxy Lactam / CIS(+)-2-(4-Methoxy Phenyl)-3- Hydroxy-2, 3-Dihydro-1,5-Benzothia- zepin-4-(5 H)-One." 5. 63 Chemicals Allied Products Sl.No.A391 1. The quantity of import item 1 shall be amended to read as "2.14 kg". 2. After import item 1, the following lternative item with quantity shall be added in the respective columns :- "OR Erythromycin Base (on 100% Activity Base)". 2.23 kgs 6. 68 Chemicals Allied Products Sl.No.A427 In Note below this entry, the period "31.12.1997" shall be amended to read as "31.12.1998". 7. 74 75 Chemicals Allied Products Sl.No.A493 The norms covered by this entry shall be deleted. 8. 84 Chemicals Allied Products Sl.No.A580 The norms covered by this entry shall be substituted by the following:- A580 Di-ethyl Aniline 1 Kg. 1. Aniline 0.800 kg. 2. Denatured Ethyl Alcohol(Purity 90%) 0.924 Kg. 9. 86 Chemicals Allied Products Sl.No.A606 After import item 2, following item with quantity shall be added:- "3. Acetone- 2.3 kgs". 10. 102 Chemicals Allied Products Sl.No.A720 The norms covered by this entry shall be substituted by the following:- A720 Mono Ethyl Aniline 1 kg. 1. Aniline 0.854 Kg. 2. Denatured Ethyl Alcohol(Purity 90%) 0.632 kg. 11. 156 Chemicals Allied Products Sl.No.A1168 The norms covered by this entry shall be substituted by the following:- A1168 Silicon Carbide Grains 1 MT 1. Silicon Carbide Crude / Lumps (containing not less than 95% on Dry basis) 1.15 MT Note: The purity of export product shall not be lesser than the purity of imported item. 12. 160 Chemicals Allied Products Sl.No.A1216 The note below this entry shall be deleted. 13. 162 Chemicals Allied Products Sl.No.A1232 The description of import item 1 shall be corrected to read as under: "Ethoxy Methylene Malonic Acid Ester (EMME)" 14. 169 Chemicals Allied Products Sl.No.A1332 The description of the export product shall be corrected to read as under:- "DV Acid Chloride / Cypermethric Acid Chloride". 15. 173 Chemicals Allied Products Sl.No.A1381 Note below this entry shall be deleted. 16. 181 Chemicals Allied Products Sl.No.A1481 After import item 1, the following alternative items with quantity shall be added:- "OR 1. Octamethyl Cyclo Tetrasilo Siloxane 1.04 kg 2. Siloxane 45-C 1.04 kg 3. Dimethyl Cyclic 1.04 kg 4. Hydrolizate 1.04 kg 17. 183 Chemicals Allied Products Sl.No.A1500 The Note below this entry shall be deleted. 18. 255 Chemicals Allied Products Sl.No.A1902 (Introduced vide Public Notice No.13 dated 5.6.97) After this norm the following alternative import items with quantity shall be added:- OR "1. Diethyl Phosphoro Chloride Thioate (DETCL) 0.638 kg 2. Orthochlorophenol (OCP) 0.440 kg 4. Propyl Bromide 0.363 kg". 19. 255 Chemicals Allied Products Sl.No.A1926 (Introduced vide Public Notice No.21 dated 30.6.1997) The norms covered by this entry shall be substituted by the following:- A1926 Lansoprasole Pellets 8.5% 1 Kg. 1. 2,3 Lutidine 0.243 kg 2. Trifluro Ethanol 0.414 kg 3. 2-Mercapto Benzimidazole 0.068 kg 4. Methylene Chloride 1.06 kg 5. Isopropyl Alcohol 0.100 kg 20. 255 Chemicals Allied Products Sl.No.A1946 (Introduced vide Public Notice No.34 dated 22.8.97) The norms covered by this entry shall be substituted by the following:- A1946 Insoluble Sulphur (67%) 1 kg 1. Sulphur 0.73 kg 2. Coating Oil 0.33 kg 21. 255 Chemicals Allied Products Sl.No.A1955 (Introduced vide Public Notice No.43 dated 25.9.97) After import item 3, following additional item with quantity shall be added:- "4. Antioxidant (Di-tertiary Butyl Hydroxy Phenyl Propionate)" Upto 1% of the weight of export. 22. 265 266 Electronics Products Sl.No.B19 After import item 8, against this entry the following item with quantity shall be added:- "9. Miniature Tubular Ceramic Capacitor" Net to net 23. 323 324 Electronics Products Sl.No.B132 1. The description of import items 3 6 alongwith quantity shall be substituted by the following:- "3. Case with or without Integrated Bracelet 1 No. OR Parts of Cases: a)Bezel 1 No. b)Back Cover 1 No. c)Benzel Ring 1 No. d)Mineral Glass (Crystal) 1 No. e)Gaskets 2 Nos. f)Movement Holder 1 No. g)Case Pipe / Stem Pipe 1 No. h)Spring Bars 2 Nos. i)Crown$ 1 No. 6. Watch Straps / Bracelets 1 No. OR Parts of Straps: a)Strap Links 1 Lot OR a)Leather Pads 2 Nos. b)Buckles 1 No. c)Clasps with Sliding Lock". 1 No. 2. After import item 6, following additional item with quantity shall be added:- "7. Watch Glass 1 No.". 24. 340 Electronics Products Sl.No.B214 (Introduced vide Public Notice No.71 dated 19.2.98) 1. The quantity of import item 10 shall be corrected to read "116.67 gms". 2. In the Note, below this norm, the period "31.3.1997" shall be amended to read as "30.6.98". 25. 377 Engineering Products Sl.No.C204 The import items 7 8 against this entry shall be deleted. 26. 390 Engineering Products Sl.No.C254 The norms covered by this entry shall be substituted by the following:- C254 PTFE Insulated Wires and Cables with conductor diameter more than 0.5mm 1 kg 1. Copper (Cathode /Wire Bar / Continuous Cast Rod / Wire / Alloy Wire) 1.02 kg/kg of net content in the export product. 2. PTFE Resin Fine Powder 1.15 kg/kg of net content in the export product. 3. Silver 99.9% Purity (Ingots / Shots / Powder) 1.003 kg/kg of net content in the export product. 4. Pigment, Ink, Silicone Fluid, Polyimide(Kapton), Low-noise Disper- sion, Tween-85, Synthetic Resin, Yarn Plain Finished Sized including Glass Fibre Yarn, Finished Forms, Dispersions of Polymeric Resins Upto 2% of the FOB value of exports. 5. S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper / Copper Alloy / Copper covered Steel / Nickel / Resistance Alloys / Stainless Steel, Connectors Flat / Round / Coaxial, Terminations Upto 2% of the FOB value of exports. Note.1 Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and fornickel coated wires, nickel will be allowed. 27. 390 391 Engineering Products Sl.No.C255 The norms covered by this entry shall be substituted by the following:- C255 PTFE Insulated Wires with conductor diameter equal to or less than 0.5mm and PTFE Thickness less than 0.18mm 1 kg 1. Copper (Cathode / Wire Bar / Continuous Cast Rod / Wire / Alloy Wire) 1.02 kg/kg of net content in the export product. 2. PTFE Resin Fine Powder 1.35 kg/kg of net content in the export product. 3. Silver 99.9% Purity (Ingots / Shots / Powder) 1.003 kg/kg of net content in the export product. 4. Pigment, Ink, Silicone Fluid, Polyimide(Kapton), Low-noise Dispersion, Tween-85, Synthetic Resin, Yarn Plain Finished Sized including Glass Fibre Yarn, Finished Forms, Dispersions of Polymeric Resins Upto 2% of the FOB value of exports. 5. S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper / Copper Alloy / Copper covered Steel / Nickel / Resistance Alloys / Stainless Steel, Connectors Flat / Round / Coaxial, Terminations Upto 2% of the FOB value of exports. Note.1 Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed. 28. 403 Engineering Products Sl.No.C297 1. The description of the export product shall be amended to read as under:- "Stamping (Stator Rotor Sets) for Electric Motors" 2. The quantity of import item shall be amended to read as "2.20 kgs / kg content in the export product." 29. 459 Engineering Products Sl.No.C483 1. The description of import item 3 alongwith quantity shall be amended to read as under:- "3. Liquified Petroleum Gas 86 kgs OR Furnace Oil 111 kgs". 2. At the end of Note 1 below this entry, the following shall be added in continuation:- "or Furnace Oil as required." 30. 459 460 Engineering Products Sl.No.C484 1. The description of import item 2 alongwith quantity shall be amended to read as under:- "2. Liquified Petroleum Gas 86 kgs OR Furnace Oil 111 kgs". 2. At the end of Note 1 below this entry, the following shall be added in continuation:- "or Furnace Oil as required." 31. 470 Engineering Products Sl.No.C508 In the description of import item 1(ii), the alternative item "Naphtha" shall be deleted. 32. 490 Engineering Products Sl.No.C536 The description of import item 2 alongwith quantity shall be amended to read as under:- "2. Plastic Gasket Net to net. OR LDPE Granules 1.05 kg/kg weight of Gasket." 33. 491 Engineering Products Sl.No.C544 After import item 2, the following additional item with quantity shall be added:- "3. Plastic Gasket Net to net. OR LDPE Granules 1.05 kg/kg weight of Gasket." 34. 498 Engineering Products Sl.No.C599 The description of the export product shall be amended to read as under:- "Clips for Railways - Elastic Rail Clips, Pandrol Clips, E. Clips and G. Clips". 35. 500 501 Engineering Products Sl.Nos.C615, C617, C618 and C619 The description of import item 1 against these entries shall be amended to read as under:- "1. CRCA Sheet / Coil". The quantity will remain unchanged. 36. 509 Engineering Products Sl.No.C673 The description of the import item against this entry shall be amended to read as under:- "1. MS Sheet / Coil OR Stainless Steel Sheet / Coil". The quantity will remain unchanged. 37. 526 527 Engineering Products Sl.No.C791 The quantity of import item 1 shall be amended to read as "2.0 MT". 38. 527 Engineering Products Sl.No.C794 The quantity of import item 1 shall be amended to read as "1.50 MT". 39. 533 Engineering Products Sl.No.C831 The norms covered by this entry shall be substituted by the following:- C831 Stainless Steel Seamless Tubes / Pipes (ColdFinished) 1 MT 1. Stainless Steel Tubes / Pipes (Hot Finished) (OD not less than 42mm) 1.35 MT 2. Consumables viz Band Saw Blades / Lubricating Oil Upto 2% of FOB value of export. 40. 544 Engineering Products Sl.No.C902 After import item 2, following additional item with quantity shall be added:- "3. Machine Screws Net to net." 41. 546 Engineering Products Sl.No. C919 The norms covered by this entry shall be substituted by the following:- C919 Drilling Machine Accessories:- a)Drill Rods / Core Barrels / Core Lifter / Coupling / Adapters / Core Lifter Case / Subs- titutes made out of Carbon Steel Seamless Tubes 1 MT 1. Seamless Carbon Steel Tubes / Steel Tubes / Drilling Tubes 1.1 MT b)Casing Tubing Pipes 1000 Mtrs. 1. Plain and Seamless Pipes 1055 Meters 42. 550 Engineering Products Sl.No.C947 The description of the import item 1 shall be amended to read as under:- "1. Permanent Magnet Strontium Ferrite Grade". 43. 551 Engineering Products Sl.No.C951 The norms covered by this entry shall be substituted by the following:- C951 Saws / Segments made from High Speed Steel Strips / Sheets including Bimetal Flexible 1 kg 1. High Speed Steel and Bimetal Strips / Sheets 1.20 kg 44. 568 Engineering Products Sl.Nos.C979 C980 After import item 3 against these entries, the following additional item with quantity shall be added:- "4. Grinding Wheel, Diamond / Abrasive Electrometallic Slitting Saw Carbide Tips, Mould Release Solution and Endless Emery Belt" Upto 3% of FOB value of export. 45. 581 582 Engineering Products Sl.No.C1035 The norm covered by this entry shall be substituted by the following:- C1035 Single Cylinder Fuel Injection Pump for Diesel Engines 1 No. A. RAW MATERIALS: 1. Alloy Steel Bars / Coil to specification SAE 52100 or equivalent 2.86 kg/kg content in export. 2. Alloy Steel Bars / Coil to specification SAE 3415 or 16Mn CrS5 or equivalent 3.28 kg/kg content in export. 3. Pig Iron 1.40 kg/kg content in export. 4. Free Cutting Leaded / Non Leaded Bars / Coils including Ultrasonically tested Steel or equivalent 2.11 kg/kg content in export. 5. Steel to specification EN 8M or VS 13113 or equivalent 3.22 kg/kg content in export. 6. Spring Steel 1.11 kg/kg content in export. B. COMPONENTS: 7. Element 8. Delevery Valve 9. Compression Spring 10. O Ring 11. Round Head Grooved Screw 12. Guide Plate 13. Protective Cap 14. Clamping Ring 15. Pin 16. Fillister Head Screw 17. Spring Seat 18. Guide Pin 19. Plug 20. Spring Ring 21. Filler Piece 22. Eccentric Bolt 23. Gasket 24. Sleeve 25. Control Rod 26. Roller 27. Roller Tappet Body 28. Control Sleeve 29. Retaining Ring 30. Eccentric Pin 31. Screw Plug Net to net. C. CONSUMABLES: 32. CNB / Diamond Honing Stick Blanks / Support Stone / Deburrring Tools 33. Hone Holders 34. Plain Grinding Wheels / Disc. Wheels for Lap / Match Grinding / CBN Wheels 35. Carbide End Mills / Tools 36. Gem Shaper 37. Diamond Dresser 38. Deep Hole Drills 39. Reamers 40. Oil Stones 41. Broaches 42. Drills 43. Calibration Fluid / Test Oil Upto 3% of FOB value of export. 46. 642 Engineering Products Sl.No.C1298 (Introduced vide Public Notice No.34 dated 22.8.97) The quantity of import item 1 shall be amended to read as "1.33 MT ". 47. 651 Food Products Sl.No.E38 The quantity of import item 3 shall be amended to read as under:- "2 gms.Sack of minimum 25 kgs capacity". 48. 651 Food Products Sl.No.E41 The norms covered by this entry shall be substituted by the following:- E41 Salt packed in HDPE / LDPE / PP Woven Sacks having minimum capacity of 25 kgs 1 kg 1. HDPE / PP Granules 1.10 kg/kg content in the export product. 2. LDPE Granules 1.05 kg/kg content in the export product. 3. Printing Ink 2 gms / sack 49. 652 653 Food Products Sl.No.E49 The quantity of import item 5 shall be amended to read as under:- "2 gms.Sack of minimum 25 kgs capacity". 50. 659 660 Leather Leather Products Sl.Nos.G1 G2 The import item 1(a) against these entries shall be amended to read as under:- "1. (a)Outer Lining (Polyester / Nylon / Viscose / Cotton Fabric Cowry / Blended Fabrics / Wool Synthetic Lining) - (only the relevant items used / to be used in export is to be allowed for import)". 51. 742 743 Plastic Products Sl.No.H113 1. The description of the export product shall be amended to read as under : "HDPE Woven sacks laminated / coated with / without liner." 2. Below this entry, the following Note shall be added:- "Note: The item 3 above will be allowed only in case the export product is with Liner". 52. 743 Plastic Products Sl.No.H115 The norms covered by this entry shall be substituted by the following:- H115 HDPE / PP Beautycase / Briefcase / Suitcases with / without Aluminium Frame of all sizes HDPE / PP / LDPE 1 No. 1. Granules of Relevant Polymer for manufacture of main body / Components 1.05 kg/kg content in export. 2. PVC Compound 1.05 kg/kg content in export. 3. Aluminium Sheet / Strips 1.05 kg/kg content in export. 4. Combination Lock / Number Lock/Side Lock / parts thereof Net to net. 5. Relevant Lining (Rayon / Polyester / Nylon / Polypropylene 1.10 Sq. Mtr / Sq.Mtr content in export. 6. Carrying Handle Net to net. 7. Handle Lugs Net to net. 8. Pulling Handle Net to net. 9. Glue Foil 1.05 kg/kg content in export. 10. Kraft Paper / Board for Lining / Divider 1.05 kg/kg content in export. 11. Relevant Metallic / Non-Metallic Components Net to net. 12. Extruded Flexible Plastsic Profiles 1.02 Mtr / Mtr content in export. 13. Relevant Zip Fastener Net to net. Note: In case of export of coloured items, the relevant colour Master Batch may be allowed as an input @0.02 kg/kg weight of Polymer. In case Colour Master Batch is imported, then relevant Polymer at item 1 wil be reduced to 1.03 kg/kg content in export product. 53 760 Plastic Products Sl.No.H194 The norms covered by this entry shall be substituted by the following:- H194 Plastic Shaving / Household Brush 1 kg 1. Relevant Nylon / PP Monofilament Bristles 1.05 kg/kg content in the export product. 2. Relevant Polymers like ABS Granules / PP Granules / HIPS Granules 1.05 kg/kg content in the export product. 3. Relevant Dyes Upto 1% weight of Polymer content at 1 above. Note.1 Only the relevant item required will be allowed to be imported. 54. 791 792 Plastic Products Sl.No.H325, H326 H327 The norms covered by these entries shall be deleted. 55. 798 Sports Goods Sl.Nos.I14 I15 (Introduced vide Public Notice No.43 dated 25.9.97) 1. The quantity of import item 1, mentioned against these entries shall be ammended to read as "0.20 Sq.Mtr" and "0.18 Sq.Mtr." respectively. 2. After Sl.No.I15, the following Note shall be added: "Note: In respect of Sl.No.I13 to I15, the thickness of PVC Leather cloth to be allowed for import would be of 1.2 mm to 1.6 mm". 56. 799 General Note for Textiles Note.2 The percentage limit of "2%" allowed in this Note shall be amended to read as "5%". 57. 836 Textile Products Sl.No.J137 The norms covered by this entry shall be substituted by the following:- J137 Anoraks 1 No. 1. PU / PVC Coated Nylon / Polyester Fabric 3.20 Sq.Mtr. 2. Reflective Fabric in 2" width Net+0.5% 3. PU / PVC Fusing / Sealing Tape in 20mm width Net+0.5%. 4. Nylon Zippers Net to net. 5. Metal Studs Net to net. 6. Polyester Thread 200 Mtrs. 7. Labels Net to net. 58. 858 859 Miscellaneous Products Sl.No.K23 In import item 1, the following alternative item with quantity shall be added:- "OR Relevant Synthetic Lining 1.05 Sq.Mtr /Sq.Mtr content in the export product." Annexure "B" to Public Notice No.5(RE-98) Dated : 15.04.98 CHEMICALS AND ALLIED PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) A2027 Cefatoxime Sodium 1 kg 1. 7 ACA 0.81 kg 2. Mercapto Benzo Thiazole-4-YL-2- (2-Amino Thiazolyl) Methoxy Imino Acetate (MAEM) 1.12 kg OR 2. i)Ethyl Aceto Acetate 2.06 kgs ii)Potassium Carbonate 2.18 kgs iii)Bromine 1.96 kg iv)Triphenyl Phosphine 1.23 kg v)Vulkacit Acid 1.56 kg 3. Methylene Chloride 5.68 kgs 4. Isopropyl Alcohol 5.12 kgs 5. Acetone 1.65 kg 6. Methanol 5.72 kgs 7. Formic Acid 1.30 kg 8. Triethyl Amine 0.45 kg 9. Ethyl Hexanate /2-Ethyl Hexanic Acid 0.44 kg A2028 (3S) 1,2,3,4 Tetra Hydro Isoquinolin- 3 Carboxylic Acid 1 kg 1. L-Phenyl Alanine 1.30 kg 2. Paraformaldehyde 0.36 kg 3. Hydrobromic Acid 48% 5.16 kgs 4. Isopropyl Alcohol 0.80 kg A2029 4-Benzyloxy-Alpha-Bromo Propio- phenone 1 kg 1. Phenol 0.47 kg 2. Propionyl Chloride 0.47 kg 3. Benzyl Chloride 0.50 kg 4. Bromine 0.60 kg 5. Potassium Carbonate 0.553 kg 6. Dichloro Methane 3.25 kgs A2030 Phenidone (1-Phenyl, 3-Pyrazolidone) 1 kg 1. Aniline 1.12 kg 2. Acrylamide 0.54 kg 3. Sodium Nitrite 0.83 kg 4. Sodium Hydroxide 1.92 kg A2031 Covered Rubber Thread (Elastic Yarn 1 kg 1. Heat Resistant Rubber Thread 0.5 kg 2. Nylon / Polyester Yarn (Relevant) 0.5 kg A2032 Lansoprazole (bulk drug) 1 kg. 1. 2,3 Lutidine 2.80 Kg. 2. Trifluro Ethanol 4.87 Kg. 3. 2-Mercapto Benzimidazole 0.80 Kg. 4. Methylene Chloride 12.5 Kg. 5. Isopropyl Alcohol 1.25 Kg. A2033 Albendazole Sulphoxide 1 kg 1. N-Propyl Bromide 1.20 kg 2. Hydrogen Cynamide 50% Solution 1.024 kg 3. Methyl Chloro formate 3.585 kgs 4. Di-Methyl Sulphoxide 2.00 kgs 5. Iso Propyl Alcohol 8.25 kgs 6. N-Propanol 6.766 kgs A2034 Dry Choline Chloride 75% Aquous (Animal Feed Supplement) 1 kg 1. Ethylene Oxide 0.251 kg 2. Trimethyl Amine 0.337 kg A2035 Dry Choline Chloride 60% Cereal Base 1 kg 1. Ethylene Oxide 0.203 kg 2. Trimethyl Amine 0.272 kg A2036 1-Phenyl Piperazine 1 kg 1. Aniline 1.67 kg 2. BIS(2-Chloro Ethyl) Amine Hydrochloride 3.36 kgs 3. Caustic Soda Flakes 1.72 kg A2037 Pigment Yellow 127 (Pigment content 98%) 1 kg 1. Aceto Acet Meta Xylidide 0.460 kg 2. Aceto Acet Ortho Anisidide 0.144 kg 3. Sodium Nitrite 0.214 kg 4. Caustic Soda Flakes 0.614 kg 5. Acetic Acid 0.231 kg A2038 Silicon Rubber Compound 1 kg 1. Octamethylcyclo-tetrasiloxane 0.644 kg 2. Fumed Silica 0.192 kg A2039 Injection Moulding High Impact Polystyrene Razor Handles 1 kg 1. High Impact Polystyrene Granules 1.03 kg 2. Relevant Colour Master Batch 0.02 kg A2040 3,4 Dichloro Aniline 1 kg 1. 3,4 Dichloro Nitro Benzene 1.40 kg 2. Formic Acid 0.32 kg 3. Mono Chloro Benzene 0.20 kg A2041 Diazinon 14% Granules 1 kg 1. Diazinon Technical 95% Active Ingradient 0.141 kg A2042 Methanation Catalyst 1 kg 1. Nickel Metal Unwrought 0.214 kg 2. Special Grade Alumina Powder 0.278 kg A2043 6 Chloro 2,4 Dinitro Aniline 1 kg 1. 2,4 Dinitro Chloro Benzene 1.302 kg A2044 Acid Black 10 BX (C.I.Acid Black 1) (Dye content-82%) 1 kg 1. Para Nitro Aniline 0.193 kg 2. H-Acid 0.403 kg 3. Aniline 0.121 kg 4. Sodium Nitrite 0.188 kg A2045 N-Amino Ketone Hydrochloride 1 Kg. 1. Phenol 1.285 Kg 2. Propionyl Chloride 0.625 Kg 3. Benzyl Chloride 0.665 Kg 4. Liquid Bromine 0.80 Kg 5. Potassium Corbonate 1.46 Kg 6. Di-chlore Methane 7.90 Kg 7. Methyl Ethyl Ketone 6.66 Kg A2046 Cinnarizine EP Grade 1 kg 1. Benzophenone 1.26 kg 2. Sodium Borohydride 0.15 kg 3. Piperazine Anhydrous 1.31 kg 4. Cinnamic Alcohol 0.527 kg 5. Methyl Ethyl Ketone 1.00 kg A2047 Sodium Sulphite 1 kg. 1. Soda Ash 0.938 kg A2048 Soder Berg Paste 1 kg 1. Raw Petroleum Coke 1.003 kg A2049 1(4-Methoxyphenyl) Piperazine 1 kg 1. Para Anisidine 1.66 kg 2. BIS(2-Chloro Ethyl) Amine Hydrochloride 2.39 kgs 3. Potassium Hydroxide 1.30 kg A2050 N-Phenyl-N-Chloro Acetyl-2,6-Di-chloro Aniline OR N-(Chloro Acetyl)-N-Phenyl-2,6-Di-chloro Aniline (DC-2) 1 kg 1. Phenol 1.75 kg 2. Per Chloro Ethylene 3.06 kgs 3. Aniline 0.50 kg 4. Potassium Carbonate 0.37 kg 5. Isopropyl Alcohol 1.00 kg A2051 Choline Bitartrate - NF 1 kg 1. D.L. Tartaric Acid 0.992 kg 2. Trimethyl Amine Solution (30%) 1.18 kg 3. Ethylene Oxide 0.265 kg A2052 Tolclophos Methyl 1 kg 1. Paracresol 0.503 kg 2. O,O Dimethyl Thiophosphoryl Chloride (DMTC) 0.651 kg A2053 4-Fluro Phenol (Minimum 97%) 1 kg 1. Para Fluro Nitro Benzene 1.89 kg OR 1. Para Fluro Aniline 1.34 kg A2054 Morniflumate 1 kg 1. 3-Cyanopyridine 1.79 kg 2. Hydrogen Peroxide 1.75 kg 3. Phosphorous Oxychloride 4.34 kgs 4. M-Amino Bensotri-fluoride 0.90 kg 5. 2-Morpholine Ethanol 0.65 kg 6. Thionyl Chloride 0.62 kg 7. Methanol 0.66 kg 8. Toluene 2.32 kgs 9. Hexane 2.32 kgs 10. Isopropyl Alcohol 2.03 kgs A2055 Phenol (Cardanol) 1 kg 1. Hydroquinone 0.005 kg A2056 Fumagillin DCH Salt 1 kg 1. Dicyclo Hexyl Amine 0.44 kg 2. Acetone 15.75 Ltrs. A2057 Heavy Duty Rubber Mountings for Trucks, Buses and Cars with Antirust Coatings 1 kg 1. M.S. C.R.C.A. / H.R. Sheets / Coils / Rods / Seconds / Defective 1.10 kg/kg content in the export product. 2. Inputs for 1 kg Rubber Compound in the export product: i)Natural Rubber 0.100 kg ii)Synthetic Rubber NBR 0.600 kg iii)Carbon Black 0.098 kg iv)Rubber Chemicals viz. Anti-oxidants, Acce-lerators, Retar-ders, Peptizers 0.028 kg v)Miscellaneous Chemicals viz. Curing Agents, Activators, Silicone Oil, Stearic Acid, Plasticizers, Microcrystallin Wax, Filler 0.056 kg 3. Bonding Agent Primer / Adhesive 0.020 kg 4. Anti-rust Primer / Coating 0.020 kg Note 1. The CIF value of Rubber Chemicals should not exceed 7% of FOB value of exports. 2. The CIF value of Miscellaneous Chemicals should not exceed 5% of FOB value of exports. A2058 Iso C Acid (2-Naphthylamine 3.4 Disulfonic Acid) 1 kg 1. Tobias Acid 1.342 kg A2059 Metamitron Technical (98% Minimum Purity) 1 kg 1. Hydrazine Hydrate (80%) 1.278 kg 2. Aluminium Chloride 1.36 kg 3. Ethyl Acetate 0.81 kg 4. Ethanol 1.00 kg 5. Benzene 1.04 kg A2060 Molybdenum Disulphide 1 kg 1. Molybdenum Ore concentrate 1.30 kg A2061 Blend of Aromatic Polyester Polyols, Amino Polyols 1 kg 1. Phthalic Anhydride 0.254 kg 2. Diethylene Glycol 0.388 kg 3. Diethanol Amine 0.123 kg 4. Nonyl Phenol 0.102 kg 5. Glycerine 0.025 kg 6. Dimethyl Cyclohexyl Amine 0.013 kg 7. Surfactant 0.011 kg A2062 Steel Cord Re-in forced Conveyor Belt of relevant Natural / Synthetic Rubber 1 MT 1. Steel Cord 1.10 kg/kg content in the export product. 2. Inputs for 1 MT of the relevant rubber compound in the export product: a)Relevant Natural / Synthetic Rubber depending upon the product like exported 525 kgs b)Carbon Black 273 kgs c)Rubber Chemicals such as Antioxidant, Accelerator, Retardent, Fire Retardent, Peptizer / Fillers 21 kgs 3. Miscellaneous Chemicals such as Softner, Stearic Acid Plasticiser, Vulkanising Agent, Processing Aid, Tackifier, Synthetic Resin, Anti-ozonant, Release Agent 36 kgs Note. 1. The CIF value of Rubber Chemicals shall not exceed 7% of FOB value of export. 2. The CIF value of Miscellaneous Chemicals shall not exceed 5% of FOB value of export. 3. Out of the total quantity of Natural / Synthetic Rubber allowed for import at item No.2(a), the differentpercentage of Synthetic Rubber to be allowed as per the following:- Grade Percentage of relevant Synthetic Rubber out of total rubber to be allowed (1) G.P. (General Purpose) 46.3% to 48% (2) H.R. (Heat Resistance) 84% (3) F.R. (Fire Resistance) 100% Annexure "C" to Public Notice No.5(RE-98) Dated : 15.04.98 ENGINEERING PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) C1329 Cultivator (Shear) 1 kg 1. Profile Steel Bar 1.05 kg/Kg content in export. C1330 Brass Lamp Caps 1 kg 1. Brass Scrap 1.10 kg/kg content in export. C1331 Knives Cutting Blades for Machine or for mechanical appliances (Centre Blade and Peanut Blade size 46-1/4" and 42" length) 1 kg 1. Alloy Steel Flat Bars 1.25 kg/kg content in the export product. C1332 Spheroidal Graphite quality Rolls for Rolling Mills - Fe-88.7%, C-3.5%, Si-2.0%,Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016%(Maximum) P-0.15%(Maximum) 1 MT 1. M.S. Scrap 1512.72 kgs 2. Ferro Silicon (Si - 70-75%) 51.82 kgs 3. Ferro Manganese (Mn - 50-62%) 32.91 kgs 4. Nickel 69.09 kgs 5. Ferro Chrome (Cr - 60-70%) 17.87 kgs 6. Ferro Molybdenum (Mo - 60-70%) 30.18 kgs 7. Furnance Oil 500 Ltrs. 8. Bantanite Green Bond (Prepared Binders) 12.00 kgs 9. Nickel Magnesium (Ni - 78-82%, Mg - 16-18% and MM - 0.7-1.2%) 22.10 kgs 10. Ferro Silicon Magnesium (Si - 50-60%, Mg - 8-10% and Fe - Balance) 22.10 kgs 11. Graphite Electrodes 9.50 kgs 12. Ramming Mass 20.00 kgs 13. Melted Flux 5.00 kgs 14. Calcium Silicide 1.11 kg 15. Flourspar (Flux) 66.31 kgs 16. Porous Plug (Laddle) 0.20 No. 17. CBN Tips 5.93 Nos. C1333 Steel Quality Rolls for Rolling Mills - Fe-93.8%, C-1.8%, Si-1.0%, Mn-1.0%, Ni-0.6%, Cr-1.4%, Mo-0.4%, S-0.04%(Maximum) P-0.04%(Maximum) 1 MT 1. M.S. Scrap 1624.64 kgs 2. Ferro Silicon (Si - 70-75%) 25.98 kgs 3. Ferro Manganese (Mn - 50-62%) 36.36 kgs 4. Nickel 10.91 kgs 5. Ferro Chrome (Cr - 60-70%) 42.42 kgs 6. Ferro Molybdenum (Mo - 60-70%) 12.13 kgs 7. Furnance Oil 500 Ltrs. 8. Bantonite Green Bond (Prepared Binders) 12.50 kgs 9. Flourspar 80.67 kgs 10. CBN Tips 5.93 Nos. 11. Graphite Electrodes 9.50 kgs 12. Porous Plug 0.20 No. 13. Ramming Mass 20.00 kgs 14. Melted Flux 12.50 kgs 15. Calcium Silicide 2.30 kg 16. Ferro Aluminium 1.15 kgs C1334 Alloy IC Quality Rolls for Rolling Mills - Fe-90.9%, C-3.3%, Si-1.6%, Mn-1.2%, Ni-2.4%, Cr-1.1%, Mo-0.5%, S-0.1%(Maximum) P-0.3%(Maximum) 1 MT 1. M.S. Scrap 1547.85 kgs 2. Ferro Silicon (Si - 70-75%) 41.56 kgs 3. Ferro Manganese (Mn - 50-62%) 43.64 kgs 4. Nickel 43.64 kgs 5. Ferro Chrome (Cr - 60-70%) 33.33 kgs 6. Ferro Molybdenum (Mo - 60-70%) 15.15 kgs 7. Furnance Oil 500 Ltrs. 8. Flourspar 67.66 kgs 9. CBN Tips 5.93 Nos. 10. Graphite Electrodes 9.50 kgs 11. Porous Plug 0.20 No. 12. Ramming Mass 20.00 kgs 13. Calcium Silicide 1.12 kg C1335 ICDP Qualaity Rolls for Rolling Mills containing Shell - Fe-88.7%, C-3.5%, Si-2.0%, Mn-1.0%, Ni-3.8%, Cr-0.5%, Mo-1.0%, S-0.016% P-0.15% Core - Fe-93.4%, C-3.5%, Si-2.0%, Mn-0.5%, Ni-0.4%, Cr-0.2%, Mo-Nil, S-0.08% P-0.1% 1 MT 1. M.S. Scrap 1758.81 kgs 2. Ferro Silicon (Si - 70-75%) 42.22 kgs 3. Ferro Manganese (Mn - 50-62%) 31.82 kgs 4. Nickel 54.83 kgs 5. Ferro Chrome (Cr - 60-70%) 40.91 kgs 6. Ferro Molybdenum (Mo - 60-70%) 7.58 kgs 7. Furnance Oil 500 Ltrs. 8. Bantanite Green Bond (Prepared Binders) 12.50 kgs 9. Flourspar 68.32 kgs 10. CBN Tips 5.93 Nos. 11. Graphite Electrodes 9.50 kgs 12. Ramming Mass 20.00 kgs 13. Calcium Silicide 1.14 kg C1336 Hi-Crome Quality Rolls for Rolling Mills containing Shell - Fe-73.8%, C-3.0%, Si-1.0%, Mn-1.2%, Ni-1.5%, Cr-18%, Mo-1.5%, S-0.02% P-0.06% P-0.06%(Maximum) Core - Fe-92.6%, C-3.2%, Si-2.0%, Mn-0.5%, Ni-1.3%, Cr-0.4%, Mo-Nil,Bond S-0.02% P-0.06% 1 MT 1. M.S. Scrap 1478.62 kgs 2. Ferro Silicon (Si - 70-75%) 46.58 kgs 3. Ferro Manganese (Mn - 50-62%) 36.37 kgs 4. Nickel 28.87 kgs 5. Ferro Chrome (Cr - 60-70%) 346.98 kgs 6. Ferro Molybdenum (Mo - 60-70%) 28.41 kgs 7. Furnance Oil 500 Ltrs. 8. Bantanite Green (Prepared Binders) 13.46 kgs 9. Nickel Magnesium (Ni - 78.82%, Mg - 16.18% and MM - 0.7-1.2%) 14.02 kgs 10. Flourspar 59.60 kgs 11. CBN Tips 5.93 Nos. 12. Graphite Electrodes 9.50 kgs 13. Ramming Mass 20.00 kgs C1337 NM(H) Quality Rolls for Rolling Mills - Fe-92.1%, C-3.7%, Si-0.5%, Mn-0.4%, Ni-2.5%, Cr-0.6%, Mo-0.2% 1 MT 1. M.S. Scrap 1620.67 kgs 2. Ferro Silicon (Si - 70-75%) 12.98 kgs 3. Ferro Manganese (Mn - 50-62%) 14.55 kgs 4. Nickel 45.45 kgs 5. Ferro Chrome (Cr - 60-70%) 18.18 kgs 6. Ferro Molybdenum (Mo - 60-70%) 6.05 kgs 7. Furnance Oil 500 Ltrs. 8. Ferro Phosphorous 426.40 kgs 9. Flourspar 56.11 kgs 10. Ferro Sulphur 59.21 kgs 11. CBN Tips 5.93 Nos. 12. Graphite Elec 9.50 kgs C1338 Cold Formed Metal Section 1 kg 1. Cold Rolled Coil 1.02 kg C1339 Brass Cup Annealed 1 kg 1. Brass Strip 1.05 kg/kg content in the export product. C1340 Auto Gate Latch, Ring Gate Latch, Ring Handle Hand Rail Bracket 1 kg 1. CRCA Sheet 1.05 kg/kg content in the export product. 2. M.S. Rod 1.05 kg/kg content in the export product. C1341 100 CC Motorcycle (2 Stroke Petrol Engine) in CKD / SKD / CBU condition 1 No. 1. CRCA Steel Sheet 1.02 kg/kg content in the export product. 2. Polyurethene Sheet 1.01 kg/kg content in the export product. 3. Aluminium Alloy Ingot 1.05 kg/kg content in the export product. 4. Unwrought Unalloyed Electrolytic Nickel 1% of weight of steel to be electro plated. 5. Oil Pump Assembly Net to net. 6. Kick Shaft Assembly Net to net. 7. Driven Gear Components Net to net. 8. Gear Primary Drive Net to net. 9. Fork Shift-I Net to net. 10. Fork Shift-II Net to net. 11. Fork Shift-III Net to net. 12. Carburettor Assembly LH Net to net. 13. Bulb Head Lamp Net to net. 14. Needle Roller Bearing (22mmX28mmX16mm) Net to net. 15. Needle Roller Bearing (14mmX18mmX16.5mm) Net to net. 16. Supressor Resistor KOA 5K Ohms PCN 1/2 Net to net. 17. Bulb (6V-21/5W) Net to net. 18. Bulb (6V-10W) Net to net. 19. Bulb (6V-2W) Net to net. 20. Rectifier Regulator Unit Net to net. C1342 Automatic Voltage Stabilisers / Servo Control Voltage Stabilisers (upto 5 KVA Capacity) 1 kg 1. CRCA Sheet 1.05 kg/kg content in the export product. 2. CRGO Silicon Steel Sheet 1.05 kg/kg content in the export product. 3. Super Enamelled Copper Wire / Electrolytic Copper Wire Rod 1.01 kg/kg content in the export product. 4. Carbon Brush Blocks 1.10 kg/kg content in the export product. 5. Light Emitting Diodes Net to net. 6. Transistors Net to net. 7. Diodes Net to net. 8. Capacitors Net to net. 9. Resistors Net to net. C1343 Typewriter(Manual) with ABS Casing 1000 Nos. 1. Mild Steel Strips 7250 kgs 2. Manganese Chrome Steel Strips 702 kgs 3. Spring Steel Strips 150 kgs 4. Mild Steel Bars / Wire 920 kgs 5. Stainless Steel Sheet 160 kgs 6. Aluminium Alloy (EM-6, LM-24) 4700 kgs 7. Zinc Ingot 500 kgs 8. ABS Granules 120 kgs 9. Type Sets Net + 1% wastage. C1344 Tin Anodes (99.85% Purity) 1 MT 1. Tin Ingot 1.01 MT Annexure "D" to Public Notice No.5(RE-98) Dated : 15.04.98 FOOD PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) E69 Chocolate 100 kgs 1. Cocoa Beans 59 kgs OR 1. Cocoa Liqour 48.26 kgs OR 1. Cocoa Liqour + Cocoa Butter 14.4 kgs +17.4 kgs OR 1. Cocoa Beans + Cocoa Butter 17.6 kgs +17.4 kgs Note: The above norms is for 100% Pure Chocolate. For different percentage of hocolate the requirement may be worked out on pro-rata basis based on the percentage content of Chocolate in the product exported. E70 Oleoresin Fenugreek 1 kg 1. Fenugreek 5.0 kg Annexure "E" to Public Notice No.5(RE-98) Dated : 15.04.98 PLASTIC PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) H371 Thermoplastic Polyurethane DESMOPAN 385 1000 kgs 1. Polyester Polyols 686 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 285 kgs 3. Butane Diol 1,4 1,4 BDO 72 kgs 4. ANOX M-20 4. ANOX 20 AM (Phenolic Anti- oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 4 kgs 6. LOXAMID EBS (N,N-Ethylene -Bis - Steramide 4 kgs OR H371 Thermoplastic polyurethane DESMOPAN 385 1. Adipic Acid 494 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 285 kgs 3. Butane Diol 1,4 1,4 BDO 408 kgs 4. ANOX M-20 (Phenolic Anti-oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 4 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 4 kgs H372 Thermoplastic Polyurethane DESMOPAN 191 1000 kgs 1. Polyester Polyols 784 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 261 kgs 3. Butane Diol 1,4 1,4 BDO 41 kgs 4. ANOX 20 AM (Phenolic Anti-oxidants) 5 kgs 5. STABAXOL - 1 (Carbodimide) 3 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 12 kgs 7. VANOX-12/P.P. Diphenyl Amine 5 kgs H373 Thermoplastic Polyurethane DESMOPAN 192 1000 kgs 1. Polyester Polyols 606 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 338 kgs 3. Butane Diol 1,4 1,4 BDO 97 kgs 4. ANOX M-20 (Phenolic Anti-oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 4 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 6 kgs OR 1. Adipic Acid 436 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 338 kgs 3. Butane Diol 1,4 1,4 BDO 394 kgs 4. ANOX M-20 (Phenolic Anti-oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 4 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 6 kgs H374 Thermoplastic Polyurethane DESMOPAN 359 1000 kgs 1. Polyester Polyols 444 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 472 kgs 3. Butane Diol 1,4 1,4 BDO 151 kgs 4. ANOX M-20 (Phenolic Anti-oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 2 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 3 kgs OR 1. Adipic Acid 320 kgs 2. MDI / Desmodor Trial product fused (PU 0118 Fused) 472 kgs 3. Butane Diol 1,4 1,4 BDO 369 kgs 4. ANOX M-20 (Phenolic Anti- oxidants) 1 kg 5. STABAXOL - 1 (Carbodimide) 2 kgs 6. LOXAMID EBS (N,N-Ethylene - Bis - Steramide 3 kgs H375 Modified PPO(PPE) Compounds 1 kg 1. PPO Resin 0.530 kg 2. High Impact Poly-styrene 0.347 kg 3. Resorcinol 0.127 kg Note.1 The export product is unreinforced flame retardant grade. 2. The above export product contains 50%+/-1% PPO and 33%+/-1% High Impact Polystyrene. Any variation in the ratio, the quantity may be worked out on pro-rata basis. H376 PC / ABS Alloy 1 kg 1. PPO Resin 0.520 kg 2. High Impact Poly-styrene 0.347 kg 3. Resorcinol 0.127 kg Note.1 The export product is unreinforced grade. 2. The above export product contains 73%+/-1% PC and 14.5%+/-1% SAN and 12.5%+/- 1% ABS. Any variation in the ratio, the quantity may be worked out on pro-rata basis. H377 Nylon 6/66 Compounded Chips 1 kg 1. Relevant Nylon 6/ 66 Chips 1.03 kg/kg content in the export product. H378 Silicone Compound C" 1 kg 1. Low Molecular Weight Silanol Octamethylcyclo- tetrasiloxane Siloxane C-45 Octamethylcyclic Hydrolisate 0.364 kg H379 Polyester Buttons 1 kg 1. Polyester Resin 1.05 kgs H380 Laminated Poly ethylene Tarpaulins containing 65%+/-3% Fabric and 35%+/-3% Laminating Resins (Minimum width X Length 9 Feet X 9 Feet) 1 kg 1. Polyethylene Unlaminated Fabric 50-130 GSM width not exceeding 2.1 Meter 0.715 kg 2. LDPE Granules (Lamination Grade) 0.350 kg 3. LDPE Colour Master Batch 0.0175 kg 4. UV Stabilisers 0.0175 kg 5. Aluminium Eyelets (Gromets) Net+1% wastage. Note 1. The above norms are for laminated polyethylene tarpaulin having 65% of unlaminated fabric and 35% weight of lami-nating resin (Quantity allowed together at Sl.Nos.2,3 4). 2. For variations in weight of unlaminated fabrics, the quantity at Sl.No.1 and for laminating resin the quantity of input at Sl.Nos.2 to 4 may be worked out on pro-rata basis. H381 Tensioner Combination (made out of Polycarbonate) 1 kg 1. Polycarbonate Granules 1.05 kg/kg content in the export product. H382 Fibreglass Tissue Reinforced with Fibreglass Yarn with UF/PF Resin content Min. 17% 1 MT 1. Chopped Strand of Fibreglass (Moisture content Minimum 13.5%) 1.225 MT/MT content in the export product. 2. Fibreglass Yarn 1.09 MT/MT content in the export product. 3. Natrosol (Hydroxy Ethyl Cellulose) 11.60 kgs 4. Myacide (2-Bromo-2-Nitropropane 1-3 Diol) 1.61 kgs 5. Aerosol 0.30 kgs 6. Formaline (37%) 385.00 kgs 7. Hemopur (Solution of Stabilised Chlorine Dioxide) 4.97 kgs Annexure "F" to Public Notice No.5(RE-98) Dated : 15.04.98 TEXTILE PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) J298 Furnishing Fabric made out of Dyed Polyester Filament Yarn Dyed Cotton Yarn 1 kg 1. Grey Polyester Filament Yarn 1.10 kg/kg content in the export product. 2. Cotton Yarn Undyed 1.10 kg/kg content in the export product. 3. Disperse Dyes of 100% Strength Upto 2% of weight of Polyester Filament Yarn content in the export product. 4. Reactive Dyes of 100% Strength Upto 1.5% of weight of cotton yarn in the export product. J299 Cotton Woven Interlining 1 kg 1. Cotton Processed Fabrics 1.01 kg/kg content in export. 2. LDPE Powder 15% of weight of Cotton Fabric in export. Annexure "G" to Public Notice No.5(RE-98) Dated : 15.04.98 MISCELLANEOUS PRODUCTS Sl. No. Export Item Import Item Name Qty. Name Qty. (1) (2) (3) (4) (5) K110 Coir Products Mixture of Coir Yarn and Sisal Yarn 1 kg 1. Sisal Yarn 1.05 kg/kg content in the export product. Note: The applicant should indicate the percentage composition of Coil Sisal in the export product. K111 Metal Continuous Chain for Zippers / Metal Gapped Chain for Zippers (Brass / Nickel Brass / Aluminium) 1 kg 1. Beaded Tape / Side Tape 1.05 kg/kg content in the export product. 2. a)Metal Flat Wire Brass / Nickel Brass / Aluminium for Gapped Zippers 1.45 kg b)Metal Flat Wire Brass / Nickel Brass / Aluminium for Continuous Chain 1.20 kg 3. Components: a) Sliders Net to net. b) Pin / Box Net to net.